FloraFlex Hydroponics

The FloraFlex Submersible Pump has a 1/4 HP motor, can lift water up to 25ft and pump out 1874 gallons per hour. The FloraFlex Submersible Pump 1/4 HP will be directly running when powered on, can remove water level down to 0.2''. Designed with hi-impact...

The Patent Pending FloraFlex® Nylon Valve 2.0 allows you to break sections of your garden into zones to maintain optimum and consistent feed. Choose from 3/4 or 1 inch diameter.

This product allows you to easily connect two pieces of 16-17mm FloraFlex Double Layered Tubing at a 90° angle by hand, and without the use of adhesive or tools.Max PSI 80, though emitters are recommended at no more than 50 PSI.

The FloraFlex Bubbler Flow Insert allows you to deliver water to your plants at your desired flow rate (2, 6, 10, or 20 GPH). Use with FloraFlex Multi Flow Bubbler.

Included pressure compensating Emitter with a self cleaning lateral torturous path. Recommended PSI between 15-50

Included pressure compensating Emitter with a self cleaning lateral torturous path. Recommended PSI between 15-50

The Open Flow Bubbler is an 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. This manifold easily connects to your valve with the Quick Disconnect tool. The Open Flow Bubbler has no pressure regulation...

Compatible with regular 32mm, 1" or PVC pipe. Attaches to Flora Valve with snap feature (no glue required). O-Ring included. Available in 1" or 3/4". O-Ring should be lubed (if not already) for easy install and prevention of leakage. 120 psi ...

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled...

An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled...

The PotPro Pot was strategically designed to allow air flow through the top and bottom of the medium as well as excellent drainage. It securely holds the 6'' FloraCap allowing anyone to easily transition to the new PotPro System. The Pot's built in...

Included pressure compensating Emitter with a self cleaning lateral torturous path. Recommended PSI between 15-50