Hydroponics

The PotPro Pot was strategically designed to allow air flow through the top and bottom of the medium as well as excellent drainage. It securely holds the 8'' FloraCap allowing anyone to easily transition to the new PotPro System. The Pot's built in...

Included pressure compensating Emitter with a self cleaning lateral torturous path. Recommended PSI between 15-50

The Patent Pending FloraFlex® Nylon Valve 2.0 allows you to break sections of your garden into zones to maintain optimum and consistent feed. Choose from 3/4 or 1 inch diameter.

Botanicare 2 ft x 4 ft Rack Tray is designed to fit standard (48 in L x 18 in D x 69 in H) chrome wire shelving. Utilizing bakers' racks for vertical propagation allows you to increase your production by more than 300% without sacrificing additional...

The Netafim 17mm Techlock Fittings have barb ends that fit securely on the UV Polyethylene Tubing (HGC747559) while the techlock threaded caps and compression rings ensure a tight seal. The operating pressure is 0 to 100 psi.

The Netafim 17mm Techlock Fittings have barb ends that fit securely on the UV Polyethylene Tubing (HGC747559) while the techlock threaded caps and compression rings ensure a tight seal. The operating pressure is 0 to 100 psi.

Splits one 16-17mm FloraFlex Double Layered Tubing into two with three male connections.

This product allows you to easily cap or seal off the end of your 16-17mm FloraFlex Double Layered Tubing.Max PSI 80, though emitters are recommended at no more than 50 PSI.

Connects two 16-17mm FloraFlex Double Layered Tubing pieces at a 90 angle.

The Netafim 17mm Techlock Fittings have barb ends that fit securely on the UV Polyethylene Tubing (HGC747559) while the techlock threaded caps and compression rings ensure a tight seal. The operating pressure is 0 to 100 psi.

3/4" female thread to a male 16-17mm connection for FloraFlex Double Layered Tubing

The FloraFlex Submersible Pump has a 1/4 HP motor, can lift water up to 25ft and pump out 1874 gallons per hour. The FloraFlex Submersible Pump 1/4 HP will be directly running when powered on, can remove water level down to 0.2''. Designed with hi-impact...