Controllers

The 4 light controller operates up to 4000 W of grow lights in your garden. It features heavy-duty definite purpose contactor, trigger cord set that activates your lights via an external wall timer and universal outlets that allow the use of 120 V or 240...

The smart environmental monitor. Real time and historical data: Vapor Pressure Deficit Temperature Relative Humidity Light Intensity Dew Point Included features remotely accessible via the Pulse app (PC, iOS, Android): Unlimited number of sensors...

120V Motor Speed Controller. Easily control the speed of fans, pumps, routers and most other AC/DC Brush-Type motors, 15 AMPS or less. The Speed Bully features a quick and easy to use adjustable dial that gives you full control from 0 to full RPM...

15 ft Replacement Sensor for Atlas 9 CO2 Controller.

Compact and easy-to-use, the Atlas® 9 is a grower's dream. The 15 ft remote sensor allows you to measure the CO2 levels of your garden exactly where you need to measure them. Fuzzy logic capabilities allow you to accuratly dose CO2 when using a...

One (1) outlet. 1 min intervals and run up to 20 schedules per day. Battery backup feature saves settings in case of power failure. Heavy-duty construction. Daylight savings mode to accommodate time change. Enclosure resists dust, rust and moisture. Runs...

The Titan Controls Helios 8 is a Professional Series 8-light controller. With the attached dual trigger cords you can establish two separate lighting schedules. The Titan Controls Helios 8 was constructed with commercial-grade "ballast-rated" relays. It...

The Apollo 10 240 V /24 hr timer is the perfect timing solution for your hydroponic systems. With a 10 Amp capacity, it's easy to set to run your pumps, fans, etc. The Apollo 10 has 96 non-detachable 15 min trippers and can be configured in numerous...

The Eos 2 Digital Humidity Controller makes dialing in your room's environment a breeze. It can be used to activate a device to increase humidity in your room or decrease the humidity in your room. The Eos 2 utilizes a high-quality humidity sensor as...

The APCTART2 is a cycle timer controller with day and night detection. It works to control any application requiring a device to be turned on and off at precise intervals. This timer has a wide range of uses including controlling hydroponic pumps, CO2...

The Autopilot Cumulus S50 Digital CO2 Controller measures and controls grow room carbon dioxide levels with great precision. It can operate in Fuzzy Logic mode, ppm Up or ppm Down mode. The S50 digital display shows exact ppm readings down to 1 ppm...

Quest DEH 3000R remote wall mounted digital control for Quest ventilating dehumidifiers. Features fan/filter operation and programmable ventilation timer. It has a large, easy-to-read, backlit LCD display. The DEH 3000R has high temperature cut-out, a...