Meters & Solutions

This accessory incorporates a mounting fixture at the end of a telescopic wand extendable to 33 inches (84 cm) allowing the user to place Apogee sensors in hard to reach areas. The platform features two mounting holes to accommodate both our narrow and...

The Milwaukee digital BRIX refractometer is temperature compensated with a 0 to 85 percent BRIX range and +/- 0.2 percent accuracy. It is easy to use with simple two button operation and fast with a response time under 2 seconds. Maintenance is a breeze...

Use Chemboys Citric Acid to help treat soil alkalinity. If your soil has high alkalinity for a particular plant, citric acid can be mixed in with the soil to help raise the soil's pH. In low doses, Chemboys Citric Acid can be a beneficial repellent of...

The acid formulation uses food-grade phosphoric acid to lower the pH to the proper level.

The acid formulation uses food-grade phosphoric acid to lower the pH to the proper level.

This Base solution is formulated using potassium hydroxide and potassium carbonate. Add a little at a time when your nutrient pH is too low in order to raise the pH to the proper level.

This Base solution is formulated using potassium hydroxide and potassium carbonate. Add a little at a time when your nutrient pH is too low in order to raise the pH to the proper level.

This Base solution is formulated using potassium hydroxide and potassium carbonate. Add a little at a time when your nutrient pH is too low in order to raise the pH to the proper level.

The 2.77EC solution is used as a reference or checking solution to ensure you have adequately cleaned the EC/ppm probe. Calibration Solution should be stored in a cool place out of direct sun and heat. Please keep out of reach of children. They should be...

pH measuring equipment must be cleaned and calibrated regularly to ensure they are giving the user accurate readings. pH instruments are calibrated to pH 7.0 first (buffer) then to pH 4.0 (slope). Calibration Solution should be stored in a cool place out...

pH measuring equipment must be cleaned and calibrated regularly to ensure they are giving the user accurate readings. pH instruments are calibrated to pH 7.0 first (buffer) then to pH 4.0 (slope). Calibration Solution should be stored in a cool place out...

The perfect solution to store and hydrate your Bluelab pH products. Bluelab pH Probe KCl Storage Solution is made specifically for use with Bluelab pH products. It is designed to increase response time and maximize the life of Bluelab pH pens and pH...