Fluence
-
Fluence Fluence M12 Dimming Signal Cable - 5ft - Pigtail to M12 Connector
This genuine Fluence dimming signal cable connects a Fluence fixture's power supply to your dimmer or lighting controller. One end has a 3-pin M12 threaded connector that screws onto the power supply's M12 dimming port; the other end is a pigtail of bare wires for the 0-10 V terminals on a Fluence dimmer or another controller.The 5-foot length lets you mount the dimmer or controller farther from the power supply than the short 11-inch cable allows. It fits Fluence fixtures with an M12 dimming port, including M12 models in the SPYDR 2 series, SPYDR 3, SPYDR e, VYPR 3, VYPR 4 and PYTHN; power supplies with the older plastic M16 push-lock dimming port need an M16-to-M12 dimming adapter. Length: 5 ft (1.52 m) Fixture end: M12 threaded (screw-on), 3-pin Controller end: pigtail (bare wires) Signal: 0-10 V dimming, 1 channel Fits: Fluence power supplies with an M12 dimming port Warranty: 1-year limited (Fluence) Fluence part number: 912401701622 (CCA-XXU3T2FL3X1.5)
$20.56 $17.14
-
Fluence Fluence AC Extension Cable - 6ft - Pigtail (No Plug) to M19 Push-Lock Connector
This genuine Fluence AC extension cable is for hardwiring a Fluence LED fixture. One end has Fluence's 3-pin M19 push-lock connector, which plugs into the fixture's power supply and clicks into place; the other end is a pigtail of bare wires, so a qualified electrician can connect it directly, such as in a junction box.Fluence rates it for up to 480 V AC. It fits Fluence fixtures whose power supply takes an M19 push-lock AC cable, including the SPYDR 3, SPYDR 2x, 2p, 2i and SPYDR FANG, SPYDR e, and VYPR 2x, 2p, 3x, 3p and DUO 3x2. Length: 6 ft (1.83 m) Power end: pigtail (bare wires, no plug) for direct wiring Fixture end: M19 push-lock, 3-pin Rating: 480 V AC max Not for: SPYDRx, SPYDRx PLUS, RAZRx or RAY series fixtures Warranty: 1-year limited (Fluence) Fluence part number: 912401701624 (CAA-XXU3P9FL3X1.8)
$27.91 $23.26
-
Fluence Fluence AC Extension Cable - 6ft - NEMA 5-15P Plug to M19 Push-Lock Connector
This genuine Fluence AC extension cable powers a Fluence LED fixture from a standard 120-volt wall outlet. It has a NEMA 5-15P plug on one end and Fluence's 3-pin M19 push-lock connector on the other, which plugs into the fixture's power supply and clicks into place.It's made for Fluence fixtures whose power supply takes an M19 push-lock AC cable, such as the SPYDR 2x, 2p, 2i and SPYDR FANG, SPYDR e, and VYPR 2x, 2p, 3x, 3p and DUO 3x2. To unplug it, twist the locking ring about a quarter turn counter-clockwise and pull straight out. Length: 6 ft (1.83 m) Plug: NEMA 5-15P (standard 120 V outlet) Fixture end: M19 push-lock, 3-pin Rating: 125 V AC max Not for: SPYDRx, SPYDRx PLUS, RAZRx or RAY series fixtures Warranty: 1-year limited (Fluence) Fluence part number: 912401701611 (CAA-XXU3P9FN5P1.8)
$27.91 $23.94
-
Fluence Fluence Wireless Flex Dimming Receiver for M16 Dimming Port
This Fluence Wireless Flex Dimming receiver lets you dim a fixture without running dimming cables. It plugs straight into the plastic M16 push-lock dimming port on a Fluence power supply and takes its dimming signal over a Bluetooth mesh network from a Wireless Flex 0-10V adapter, which can be driven by a SHYFT Light Scheduler (with the SHYFT adapter) or any lighting controller with a standard 0-10 V output and a 12-24 V DC supply.Use one receiver per power supply. This M16 version is for power supplies with the push-lock M16 port used on SPYDR 2 and VYPR 2 fixtures before Fluence moved to M12; fixtures with a threaded M12 port need the M12 receiver instead. It's rated IP66 for indoor or outdoor use, and Fluence specifies it for approved Fluence power supplies only. Fits: Fluence power supplies with a plastic M16 push-lock, 3-pin dimming port Wireless: Bluetooth mesh (SILVAIR), 2.4 GHz; 50 ft line of sight, up to 8 hops Output: 0-10 V DC (0-100% dimming), powered by the fixture's power supply (12 V DC) Capacity: up to 300 receivers per Wireless Flex 0-10V adapter Rating: IP66, indoor/outdoor; 14-140 °F operating Size and weight: 3.79 in long x 0.87 in diameter; 1.1 oz (31 g) Certifications: CE, FCC, IC, Bluetooth Warranty: 5-year limited (Fluence) Fluence part number: 912401701778 (WF1DG-RC13P6FBTX)
$73.98 $61.65
-
Fluence Fluence AC Extension Cable - 15ft - NEMA L7-15P Plug to M19 Push-Lock Connector
This genuine Fluence AC extension cable connects a Fluence LED fixture to a circuit with NEMA L7-15P locking receptacles, with extra length to reach a distant receptacle. It has a locking L7-15P plug on one end and Fluence's 3-pin M19 push-lock connector on the other, which plugs into the fixture's power supply and clicks into place.It's made for Fluence fixtures whose power supply takes an M19 push-lock AC cable, such as the SPYDR 2x, 2p, 2i and SPYDR FANG, SPYDR e, and VYPR 2x, 2p, 3x, 3p and DUO 3x2. To unplug it from the fixture, twist the locking ring about a quarter turn counter-clockwise and pull straight out. Length: 15 ft (4.57 m) Plug: NEMA L7-15P (locking) Fixture end: M19 push-lock, 3-pin Rating: 277 V AC max Not for: SPYDRx, SPYDRx PLUS, RAZRx or RAY series fixtures Warranty: 1-year limited (Fluence) Fluence part number: 912401701626 (CAA-XXU3P9FL7P4.6)
$58.75 $48.96
-
Fluence Fluence PYTHN Jumper Cable - 39in - M25 5-Pin
This Fluence jumper cable links PYTHN under-canopy LED fixtures that aren't plugged directly into each other. PYTHN fixtures normally join end to end with their built-in connectors; use the jumper to connect rows of fixtures so they can share one power cable, or for runs installed perpendicular to the bench.It's 39 inches (1 m) long, with M25 5-pin connectors, the same connector type as the PYTHN AC power cable. Length: 39 in (3 ft 3 in / 1 m) Connectors: M25 5-pin Use: connects rows of PYTHN fixtures, or fixtures installed perpendicular to the bench Not needed: between fixtures joined directly end to end Fits: Fluence PYTHN fixtures Fluence part number: 912401707179 (PT-JC-M25-5p-1m-S)
$30.60 $25.50
-
Fluence Fluence PYTHN AC Power Cable - 57in - M25 5-Pin
This Fluence power cable brings power to a run of PYTHN under-canopy LED fixtures. Its M25 5-pin connector plugs into the first fixture in the run, and Fluence requires a PYTHN power cable at the start of each run.The other end is a pigtail with three bare wires and no plug, made for hardwiring by a qualified electrician into a junction box or power source. A plug for a 120 V or 240 V receptacle is not included. Length: 57 in (4 ft 9 in / 1.5 m) Fixture end: M25 5-pin connector Power end: pigtail, 3 wires, no plug Wire colors: brown = line, blue = neutral (or second line on line-to-line circuits), green/yellow = ground Cable: 3-conductor, 1.5 mm² Fits: Fluence PYTHN fixtures Fluence part number: 912401707166 (PT-CAC-M25-5-1.5-S)
$23.18 $19.31
-
Fluence Fluence Lance Wire Hangers for SPYDR Fixtures - Pair
Fluence's Lance Wire Hanger Kit gives a SPYDR fixture a simple two-point hang. One lance hanger snaps into the mounting slots on each side of the fixture frame, and you hang the fixture from the center of each hanger with your own chain or cable.The kit includes two hangers, enough for one fixture. Fluence lists it for SPYDR 2-series, SPYDR 3 and SPYDR e fixtures and includes lance hangers with its SPYDR 2i retail kits, so it also makes an easy replacement. For a level hang, keep the power supply centered on the fixture. Contents: 2 lance wire hangers (one fixture) Hang points: 2, one on each side of the frame Fits: SPYDR 2-series, SPYDR 3 and SPYDR e Not for: SPYDRx or SPYDRx PLUS fixtures Chain or cable: not included Warranty: 1-year limited (Fluence) Fluence part number: 912401701633 (MT-SR-M2-XX)
$10.65 $8.49
-
Fluence Fluence Wireless Flex Dimming Adapter for SHYFT
This adapter connects Fluence Wireless Flex Dimming to a Fluence SHYFT Light Scheduler. It installs inside the back of the SHYFT, wiring into its terminal block, and gives the SHYFT two zone ports (CH 1 and CH 2) where Wireless Flex 0-10V adapters click on.Use one port for a single lighting zone or both for two zones, and cover an unused port with the Wireless Flex dust cap. The SHYFT's own power adapter powers the unit and the attached wireless adapters, and each fixture then needs one Wireless Flex receiver on its power supply. This adapter is only needed when a SHYFT is your controller. For: Fluence SHYFT Light Scheduler Ports: 2 (CH 1 = Zone 1, CH 2 = Zone 2) Connects: Wireless Flex 0-10V adapters, one per zone Install: inside the back of the SHYFT, wired to its terminal block Not included: SHYFT, Wireless Flex 0-10V adapters, receivers, dust cap Fluence part number: 912401701790 (WF1DA-SW14L4XP6M)
$25.02 $20.85
-
Fluence Fluence AC Extension Cable - 15ft - NEMA 5-15P Plug to M19 Push-Lock Connector
This genuine Fluence AC extension cable powers a Fluence LED fixture from a standard 120-volt wall outlet, with extra length to reach a distant receptacle. It has a NEMA 5-15P plug on one end and Fluence's 3-pin M19 push-lock connector on the other, which plugs into the fixture's power supply and clicks into place.It's made for Fluence fixtures whose power supply takes an M19 push-lock AC cable, such as the SPYDR 2x, 2p, 2i and SPYDR FANG, SPYDR e, and VYPR 2x, 2p, 3x, 3p and DUO 3x2. To unplug it, twist the locking ring about a quarter turn counter-clockwise and pull straight out. Length: 15 ft (4.57 m) Plug: NEMA 5-15P (standard 120 V outlet) Fixture end: M19 push-lock, 3-pin Rating: 125 V AC max Not for: SPYDRx, SPYDRx PLUS, RAZRx or RAY series fixtures Warranty: 1-year limited (Fluence) Fluence part number: 912401701612 (CAA-XXU3P9FN5P4.6)
$42.60 $36.54
-
Fluence Fluence M12 Dimming Signal Cable - 11in - Pigtail to M12 Connector
This genuine Fluence dimming signal cable connects a Fluence fixture's power supply to your dimmer or lighting controller. One end has a 3-pin M12 threaded connector that screws onto the power supply's M12 dimming port; the other end is a pigtail of bare wires for the 0-10 V terminals on a Fluence dimmer or another controller.Fluence includes an 11-inch dimming cable with its SPYDR 2i retail kits, so this makes a handy spare or replacement. It fits Fluence fixtures with an M12 dimming port, including M12 models in the SPYDR 2 series, SPYDR 3, SPYDR e, VYPR 3, VYPR 4 and PYTHN; power supplies with the older plastic M16 push-lock dimming port need an M16-to-M12 dimming adapter. Length: 11 in (28 cm) Fixture end: M12 threaded (screw-on), 3-pin Controller end: pigtail (bare wires) Signal: 0-10 V dimming, 1 channel Fits: Fluence power supplies with an M12 dimming port Warranty: 1-year limited (Fluence) Fluence part number: 912401701621 (CCA-XXU3T2FL3X0.3)
$14.69 $12.24
-
Fluence Fluence Dimming Adapter - M16 Push-Lock to M12 Threaded
This short Fluence adapter lets M12 dimming cables connect to Fluence power supplies that have the older plastic M16 push-lock dimming port. The M16 push-lock end plugs onto the power supply's dimming port, and the threaded M12 end accepts Fluence M12 dimming cables, such as a dimming signal cable or a DIM Flex T-cable drop.Fluence specifies this adapter for its PSU1 and PSE2 power supplies with an M16 push-lock dimming port. It's part of Fluence's DIM Flex M12 wiring system, which Fluence rates as suitable for wet locations. Length: 6 in (152 mm) Power-supply end: M16 push-lock, female, 3-pin Cable end: M12 threaded (screw lock), male, 3-pin For: Fluence PSU1 and PSE2 power supplies with an M16 push-lock dimming port Warranty: 1-year limited (Fluence) Fluence part number: 912401701728 (ACA-XXU3P6FT2M0.1)
$14.77 $12.31
-
Fluence Fluence AC Extension Cable - 15ft - Pigtail (No Plug) to M19 Push-Lock Connector
This genuine Fluence AC extension cable is for hardwiring a Fluence LED fixture where the power source is farther away. One end has Fluence's 3-pin M19 push-lock connector, which plugs into the fixture's power supply and clicks into place; the other end is a pigtail of bare wires, so a qualified electrician can connect it directly, such as in a junction box.Fluence rates it for up to 480 V AC. It fits Fluence fixtures whose power supply takes an M19 push-lock AC cable, including the SPYDR 3, SPYDR 2x, 2p, 2i and SPYDR FANG, SPYDR e, and VYPR 2x, 2p, 3x, 3p and DUO 3x2. Length: 15 ft (4.57 m) Power end: pigtail (bare wires, no plug) for direct wiring Fixture end: M19 push-lock, 3-pin Rating: 480 V AC max Not for: SPYDRx, SPYDRx PLUS, RAZRx or RAY series fixtures Warranty: 1-year limited (Fluence) Fluence part number: 912401701610 (CAA-XXU3P9FL3X4.6)
$42.60 $35.50
-
Fluence Fluence AC Extension Cable - 6ft - NEMA L7-15P Plug to M19 Push-Lock Connector
This genuine Fluence AC extension cable connects a Fluence LED fixture to a circuit with NEMA L7-15P locking receptacles. It has a locking L7-15P plug on one end and Fluence's 3-pin M19 push-lock connector on the other, which plugs into the fixture's power supply and clicks into place.It's made for Fluence fixtures whose power supply takes an M19 push-lock AC cable, such as the SPYDR 2x, 2p, 2i and SPYDR FANG, SPYDR e, and VYPR 2x, 2p, 3x, 3p and DUO 3x2. To unplug it from the fixture, twist the locking ring about a quarter turn counter-clockwise and pull straight out. Length: 6 ft (1.83 m) Plug: NEMA L7-15P (locking) Fixture end: M19 push-lock, 3-pin Rating: 277 V AC max Not for: SPYDRx, SPYDRx PLUS, RAZRx or RAY series fixtures Warranty: 1-year limited (Fluence) Fluence part number: 912401701625 (CAA-XXU3P9FL7P1.8)
$42.60 $35.50
-
Fluence Fluence Wireless Flex Dimming Receiver for M12 Dimming Port
The Wireless Flex Dimming Receiver plugs straight into the M12 threaded dimming port on a Fluence fixture's power supply and picks up the dimming signal from a Wireless Flex 0-10V Adapter, so there's no dimming cable to run to that light. You need one receiver per fixture. Mounts on the 3-pin M12 threaded dimming port; powered by the fixture (12 V DC) Input: Bluetooth mesh (SILVAIR-qualified), 2.4 GHz; output: 0–10 V to the fixture, 0–100% linear 50 ft line-of-sight range, up to 8 mesh hops Fluence lists M12 compatibility for SPYDR 2h, 2i, 2p and 2x, SPYDR Fang, VYPR 2, VYPR 3, RAZR Modular and RAPTR Not for VYNE, RAY, RAZR 2/3/4, RAZRx, SPYDRx or VYPRx; approved Fluence power supplies only IP66 indoor/outdoor rated; 14–140°F (-10–60°C) operating Size: 3.79" x 0.87" · Weight: 1.1 oz CE, FCC, IC, Bluetooth; PSA Certified Level 1 security · 5-year limited Fluence warranty
$61.65
-
Fluence Fluence Wireless Flex Dimming 0-10V Adapter, Bluetooth Mesh Transmitter
The Wireless Flex Dimming 0-10V Adapter replaces dimming cable runs with a wireless link. It takes the 0–10 V signal from your controller or scheduler for one zone and sends it over a Bluetooth mesh to Wireless Flex receivers plugged into each Fluence fixture, up to 300 receivers per adapter. Channels: 1 (one adapter per dimming zone) Input: 0–10 V DC analog, linear; output: Bluetooth mesh (SILVAIR-qualified), 2.4 GHz Up to 300 receivers per adapter; 50 ft line-of-sight range, up to 8 mesh hops Works with any 0–10 V controller or scheduler; max dimming wire length 50 ft Needs its own +10 to 50 V DC power (Fluence recommends a +12 V DC supply) Set up and regroup zones with Fluence’s mobile app; settings are saved in the cloud IP66 indoor/outdoor rated; 14–140°F (-10–60°C) operating Size: 3.79" x 0.87" · Weight: 1.1 oz CE, FCC, IC, Bluetooth · 5-year limited Fluence warranty
$76.16
-
Fluence Fluence SHYFT Light Scheduler, 2-Channel 0-10V LED Dimming Controller
SHYFT is Fluence's touch-screen light scheduler for 0–10 V dimmable fixtures. It runs two independent zones of up to 50 fixtures each, with a 24-hour photoperiod schedule, optional simulated sunrise and sunset, gradual photoacclimation ramps and manual set-and-hold dimming. Channels: 2 independent 0–10 V zones; up to 50 fixtures (or 100 mA dimming current) per channel Modes: Photoperiod (24-hour schedule, optional sunrise/sunset), Photoacclimation (up to 20 days), Manual Signal: 0–10 V, ±0.1 V accuracy; 100 mA source / 30 mA sink per channel; 200–300 ft max signal wire per channel Full-color LCD touch screen with on-screen dimming-channel fault indicators Internal battery keeps your settings through a power outage IP65, Type 3R indoor/outdoor enclosure; 32–122°F (0–50°C) operating Mounts on a wall/surface or 35 mm DIN rail · 7.95" x 5.36" x 1.46" · 2.0 lb cULus and FCC Works with Fluence Wireless Flex Dimming (adapter sold separately) In the box: SHYFT Light Scheduler, wall/DIN-rail mounting bracket, drywall anchors and #10 screws, and a 120 V AC plug-in power adapter. Dimming cables are sold separately.
$598.40
-
Fluence Fluence PYTHN Under-Canopy LED Light Bar, 105–120W, Pair
PYTHN is Fluence's under-canopy light: a sealed, low-profile bar that sits on telescopic stands under the plants and lights the lower canopy to complement your top lights. Each bar puts out up to 360 µmol/s through a wide 145° beam, at up to 3.4 µmol/J on the Broad R8 spectrum. Sold as a pair. In the box: 2 PYTHN fixtures and 4 telescopic stands (8", 10" or 12" height settings) Input power (each): 120 W on Broad R6 or 105 W on Broad R8 PPF (each): up to 360 µmol/s · Efficacy: 3.0 µmol/J (Broad R6) / 3.4 µmol/J (Broad R8) Input voltage: 120–277 V AC or 347–400 V AC (choose below); integrated power supply Fixture (each): 50.4" long x 3.2" wide x 4.1" high; modules link end to end on one power connection Dimming: 0–10 V, 10–100% and dim-to-off through an M12 port IP66 wet-location rated, chemical-resistant enclosure, passive cooling ETL and CE; UL 8800; DLC listed (Controlled Environment) for indoor and greenhouse use Rated life Q90 over 36,000 hours · 5-year limited Fluence warranty Weight: 7.5 lb per fixture (15.0 lb per pair) Good to know: each run of PYTHN fixtures starts with a PYTHN AC power cable, and Fluence lists that cable and the PYTHN jumper cable as separate parts.
$406.64 - $478.72
-
Fluence Fluence VYPR 4x2 830–844W Dual LED Grow Light Bars with Power Supply, 200–480V
The VYPR 4x2 is Fluence's duo-mount VYPR 4: two sealed 24-inch VYPR 4x light bars running from one 800 W power supply, for greenhouse and single-tier indoor top lighting or HPS retrofits. On the Broad R8 spectrum Fluence rates each bar at up to 1,370 µmol/s, at 3.3 µmol/J. Input power: 830–844 W for the pair (Fluence rating at 400 V) PPF / efficacy (per bar): Broad R4 clear glass 1,120 µmol/s at 2.7 µmol/J; Broad R8 clear glass 1,370 µmol/s at 3.3 µmol/J; Broad R8 wide beam 1,320 µmol/s at 3.2 µmol/J Optics: clear glass (Lambertian distribution) or Wide Beam optic, which Fluence offers on Broad R8 only Input voltage: 200–480 V AC, 50/60 Hz Light bars: two at 23.8" x 4.2" x 3.6"; power supply: 12.5" x 5.6" x 1.9" Dimming: 0–10 V, 10–100% and dim-to-off Passive cooling; IP66; rated for up to 104°F (40°C) ambient cETLus, CE, UKCA, Wet Location; DLC listed for indoor (non-stacked) and greenhouse use Rated life Q90 over 50,000 hours · 5-year limited Fluence warranty Weight (two bars plus power supply): 19.0 lb Good to know: Fluence lists the AC power cable, the DC T-splitter and cables between power supply and bars, and the mounting hardware as separate parts in its ordering guide.
$999.03
-
Fluence Fluence VYPR 4i 825–834W LED Grow Light Bar with Power Supply, 200–480V
The VYPR 4i is the long, high-output member of Fluence's VYPR 4 family: a sealed 46-inch light bar on an 800 W power supply for greenhouse and single-tier indoor top lighting or HPS retrofits. On the Broad R8 spectrum Fluence rates it at up to 2,730 µmol/s and 3.3 µmol/J. Input power: 825–834 W (Fluence rating at 400 V) PPF / efficacy: Broad R4 clear glass 2,290 µmol/s at 2.8 µmol/J; Broad R8 clear glass 2,730 µmol/s at 3.3 µmol/J; Broad R8 wide beam 2,660 µmol/s at 3.2 µmol/J Optics: clear glass (Lambertian distribution) or Wide Beam optic, which Fluence offers on Broad R8 only Input voltage: 200–480 V AC, 50/60 Hz Light bar: 46.1" x 4.2" x 3.6"; power supply: 12.5" x 5.6" x 1.9" Dimming: 0–10 V, 10–100% and dim-to-off Passive cooling; IP66; rated for up to 104°F (40°C) ambient cETLus, CE, UKCA, Wet Location; DLC listed for indoor (non-stacked) and greenhouse use Rated life Q90 over 50,000 hours · 5-year limited Fluence warranty Weight (bar plus power supply): 19.1 lb Good to know: Fluence lists the AC power cable, the DC cable between power supply and light bar, and the mounting hardware as separate parts in its ordering guide.
$864.39
-
Fluence Fluence VYPR 4p 624–634W LED Grow Light Bar with Power Supply
The VYPR 4p is a slim, sealed 35.5-inch LED light bar with its matching power supply, built as a greenhouse or single-tier indoor top light and suited to HPS retrofits. The low-profile bar is designed to reduce shading, and on the Broad R8 spectrum Fluence rates it at up to 2,040 µmol/s and 3.3 µmol/J. Input power: 624–634 W (Fluence rating at 400 V) PPF / efficacy: Broad R4 clear glass 1,690 µmol/s at 2.7 µmol/J; Broad R8 clear glass 2,040 µmol/s at 3.3 µmol/J; Broad R8 wide beam 1,980 µmol/s at 3.2 µmol/J Optics: clear glass (Lambertian distribution) or Wide Beam optic, which Fluence offers on Broad R8 only Input voltage: 120–277 V AC or 200–480 V AC (choose below) Light bar: 35.5" x 4.2" x 3.6"; power supply: 20" x 1.7" x 1.3" (120–277 V) or 10.4" x 5.6" x 1.9" (200–480 V) Dimming: 0–10 V, 10–100% and dim-to-off Passive cooling; IP66; rated for up to 104°F (40°C) ambient cETLus, CE, UKCA, Wet Location; DLC listed for indoor (non-stacked) and greenhouse use Rated life Q90 over 50,000 hours · 5-year limited Fluence warranty Weight (bar plus power supply): 12.3 lb (120–277 V) / 14.6 lb (200–480 V) Good to know: Fluence lists the AC power cable, light-bar and power-supply mounting hardware, and the DC cable used on 200–480 V models as separate parts in its ordering guide; the 120–277 V version does not need a separate DC cable.
$675.89 - $700.13
-
Fluence Fluence SPYDR 3h47 800W LED Grow Light, PhysioSpec Broad R4a
The SPYDR 3h47 is the top-output SPYDR 3: 800 watts across six sealed bars, built for high-intensity flowering rooms. Fluence rates it at 2,200 µmol/s and 2.8 µmol/J on the PhysioSpec Broad R4a spectrum, in a 47" x 43" footprint. Input power: 800 W (Fluence rating at 277 V) PPF: 2,200 µmol/s · Efficacy: 2.8 µmol/J Spectrum: PhysioSpec Broad R4a Fixture: 47" x 43", 6 light bars on 8" spacing; removable bars and a foldable frame Input voltage: 120–277 V AC or 208–480 V AC (choose below) Dimming: 0–10 V, 10–100% and dim-to-off through the M12 port; separate input and output dimming ports to daisy-chain more SPYDR 3 fixtures IP66 sealed design; rated for up to 104°F (40°C) ambient and 90% RH, non-condensing UL 8800, UL 1598 Wet Location, CE/CB and DLC listed Rated life over 50,000 hours (driver and LED, L90) · 5-year limited Fluence warranty Weight: 26.2 lb Good to know: Fluence lists the AC power cable (M19 push-lock), the hanging kit and dimming cables for SPYDR 3 as separate parts in its ordering guide.
$911.71 - $1,054.23
-
Fluence Fluence SPYDR 3i47 700W LED Grow Light, PhysioSpec Broad R45
The SPYDR 3i47 is Fluence's 700-watt, six-bar SPYDR 3 for medium-to-high-intensity flowering rooms. It puts out 2,020 µmol/s at 2.9 µmol/J on the PhysioSpec Broad R45 spectrum, from a sealed IP66 fixture with a 47" x 43" footprint. Input power: 700 W (Fluence rating at 277 V) PPF: 2,020 µmol/s · Efficacy: 2.9 µmol/J Spectrum: PhysioSpec Broad R45 Fixture: 47" x 43", 6 light bars on 8" spacing; removable bars and a foldable frame Input voltage: 120–277 V AC or 208–480 V AC (choose below) Dimming: 0–10 V, 10–100% and dim-to-off through the M12 port; separate input and output dimming ports to daisy-chain more SPYDR 3 fixtures IP66 sealed design; rated for up to 104°F (40°C) ambient and 90% RH, non-condensing UL 8800, UL 1598 Wet Location, CE/CB and DLC listed Rated life over 50,000 hours (driver and LED, L90) · 5-year limited Fluence warranty Weight: 26.2 lb Good to know: Fluence lists the AC power cable (M19 push-lock), the hanging kit and dimming cables for SPYDR 3 as separate parts in its ordering guide.
$890.75 - $985.07
-
Fluence Fluence SPYDR 3x47 390W LED Grow Light, PhysioSpec Broad R5
The SPYDR 3x47 is the 390-watt model in Fluence's third-generation SPYDR line: a sealed, four-bar top light with a 47" x 43" footprint. Fluence recommends it for vegetative growth or lower-intensity flowering without added CO2, and it puts out 1,190 µmol/s at 3.0 µmol/J on the PhysioSpec Broad R5 spectrum. Input power: 390 W (Fluence rating at 277 V) PPF: 1,190 µmol/s · Efficacy: 3.0 µmol/J Spectrum: PhysioSpec Broad R5 Fixture: 47" x 43", 4 light bars on 12" spacing; removable bars and a foldable frame Input voltage: 120–277 V AC or 208–480 V AC (choose below) Dimming: 0–10 V, 10–100% and dim-to-off through the M12 port; separate input and output dimming ports to daisy-chain more SPYDR 3 fixtures IP66 sealed design; rated for up to 104°F (40°C) ambient and 90% RH, non-condensing UL 8800, UL 1598 Wet Location, CE/CB and DLC listed Rated life over 50,000 hours (driver and LED, L90) · 5-year limited Fluence warranty Weight: 17.4 lb Good to know: Fluence lists the AC power cable (M19 push-lock), the hanging kit and dimming cables for SPYDR 3 as separate parts in its ordering guide.
$712.60 - $740.55
You have seen 24 out of 31 products