Air Scrubbers & Purifiers

Mammoth Lighting's commercial air purifiers are built for grow rooms, dry rooms and trim rooms. The Large and Medium units pull room air through a six-stage system, and the HVAC insert treats the air inside the ductwork you already have. Large: 60 W, approx. 400 CFM, 24" x 12" x 12", 20 lb, multi-speed, wall-mount kit included Large unit extras: real-time particle and TVOC sensors, remote control, 6-foot power cord; Mammoth rates it for about 500 sq ft depending on room airflow Medium: 55 W, approx. 350 CFM, multi-speed, floor or tabletop (not wall-mountable) Six stages on the Large and Medium units: prefilter, HEPA, activated carbon, PCO, plasma ionization and UVC Ozone-free design HVAC insert: UVC, PCO, plasma and carbon stages that install in existing ductwork Mammoth's sizing guide targets 10–12 air changes per hour for the room Replacement intervals (Mammoth): HEPA up to 5,000 hours, carbon up to 2,500 hours, UV lamp up to 7,500 hours, depending on conditions

Read more less

Defender DXB 50 has been designed and engineered to deliver sanitization that is proven to reduce & eradicate surface and airborne pathogens for high load environments in Cannabis Cultivation Centers using the ProGuard ™ Sanitization Technology. Defender DXB 50 is easy to install and maintain as it operates 24/7 in Cannabis facilities. ProGuard Sanitization has been tested and validated by reputable labs across the world to ensure safety and effectiveness in reducing mold, mildew, bacteria, viruses, voc’s and other dangerous pathogens. Applications Include: indoor grow rooms, greenhouses, dry rooms, and more.

Read more less

 Phat HEPA Intake Filter, 8" The tightly woven synthetic HEPA fibers in this filter will help prevent mold, bacteria, pollen, insects and plant pests from entering your growroom or greenhouse. The HEPA fibers block out most airborne particles down to .3 microns in diameter. That is 300 times smaller than the diameter of a human hair. This is a serious insurance filter, without it you are leaving your grow room susceptible to the elements.  Installation: Attach your Organic Air HEPA filter to your fan or blower by sliding the rubber collar over the inlet or outlet side. Secure the filter by using the clamp provided, tighten clamp with screwdriver. Filter should be replaced every year under moderate use. Keeping the filter clean will ensure efficiency and longevity. The cleaner the area the longer this filter will last. To clean the HEPA filter use an air compressor to push air from the inside of the filter out. This will help extend the product life if excess dust is collecting on the surface.   Min/Max CFM Requirements 600 Min CFM 1500 Max CFM

Read more less

Defender DXB 100 with BPI has been designed and engineered to deliver sanitization that is proven to reduce & eradicate surface and airborne pathogens for high load environments in Cannabis Cultivation Centers using the ProGuard Sanitization Technology. Defender DXB 100 with BPI is easy to install and maintain as it operates 24/7 in Cannabis facilities. ProGuard Sanitization has been tested and validated by reputable labs across the world to ensure safety and effectiveness in reducing mold, mildew, bacteria, viruses, voc’s and other dangerous pathogens.

Read more less

Defender DXB Mini with BPI has been designed and engineered to deliver sanitization that is proven to reduce & eradicate surface and airborne pathogens for high load environments in Cannabis Cultivation Centers using the ProGuard Sanitization Technology. Defender DXB Mini with BPI is easy to install and maintain as it operates 24/7 in Cannabis facilities. ProGuard Sanitization has been tested and validated by reputable labs across the world to ensure safety and effectiveness in reducing mold, mildew, bacteria, viruses, voc’s and other dangerous pathogens.Applications Include: indoor grow rooms, greenhouses, dry rooms, and more

Read more less