Duct Work / Sheet Metal
-
DL Wholesale Duct Reducer - 10X8"
10X8 GALVANIZED STEEL REDUCER (NOT CRIMPED)
$15.35
-
Active Air Active Air Wide Mount Flange - 6"
Active Air Wide Mount Flange - 6"
$14.99
-
DL Wholesale Duct Reducer - 6X4"
6X4 GALVANIZED STEEL REDUCER (NOT CRIMPED)
$9.25
-
Hydrofarm Duct Reducer - 8X6"
8X6 GALVANIZED STEEL REDUCER (NOT CRIMPED)
$11.50
-
Duct Y Connector - 4"x4"x4"
Made from strong galvanized steel construction, these Y connectors allow you to split ventilation into multiple areas with one fan. Using a Y-connector gives you double the possibilities you can split a length of ducting into two separate runs of ducting going to your preferred areas. Available in a wide range of sizes to fit your situation.
$24.75
-
Hydrofarm Duct Y Connector - 6"x4"x4"
Made from strong galvanized steel construction, these Y connectors allow you to split ventilation into multiple areas with one fan. Using a Y-connector gives you double the possibilities you can split a length of ducting into two separate runs of ducting going to your preferred areas. Available in a wide range of sizes to fit your situation.
$26.00
-
Duct Y Connector - 6"x6"x6"
Made from strong galvanized steel construction, these Y connectors allow you to split ventilation into multiple areas with one fan. Using a Y-connector gives you double the possibilities you can split a length of ducting into two separate runs of ducting going to your preferred areas. Available in a wide range of sizes to fit your situation.
$23.37
-
Hydrofarm Hydrofarm Y Connector, 4" x 4" x 4"
Made from strong galvanized steel construction, these Y connectors allow you to split ventilation into multiple areas with one fan. Using a Y-connector gives you double the possibilities—you can split a length of ducting into two separate runs of ducting going to your preferred areas. Available in a wide range of sizes to fit your situation.
$19.40
-
Hydrofarm Hydrofarm Y Connector, 6" x 6" x 6"
Made from strong galvanized steel construction, these Y connectors allow you to split ventilation into multiple areas with one fan. Using a Y-connector gives you double the possibilities—you can split a length of ducting into two separate runs of ducting going to your preferred areas. Available in a wide range of sizes to fit your situation.
$23.37
-
DL Wholesale Duct Flange - 8"
DL Wholesale duct flanges are constructed of steel for durability, as well as powder coated to withstand rust that can form in humid environments. Offered in standard sizes including 4", 6", 8" 10" and 12". Duct flanges are meant for use with DL Air Duct, DL Light Proof Ducting, DL Insulated Ducting, and Terra Duct (as well as other standard sized ducting). These flanges have predrilled holes for attaching to sheet rock as well as plywood walls and also include an additional steel ring and bolt set for connecting to sheet metal duct work. DL duct flanges have rounded edges to make them easy and safe to work with and install.
$9.00
-
DL Wholesale Duct Flange - 4"
DL Wholesale duct flanges are constructed of steel for durability, as well as powder coated to withstand rust that can form in humid environments. Offered in standard sizes including 4", 6", 8" 10" and 12". Duct flanges are meant for use with DL Air Duct, DL Light Proof Ducting, DL Insulated Ducting, and Terra Duct (as well as other standard sized ducting). These flanges have predrilled holes for attaching to sheet rock as well as plywood walls and also include an additional steel ring and bolt set for connecting to sheet metal duct work. DL duct flanges have rounded edges to make them easy and safe to work with and install.
$7.25
-
Duct Elbow - 8in
Made of galvanized steel. Stronger than adjustable elbows. Solid construction to prevent air leaks.
$35.15
-
DL Wholesale Duct Flange - 6"
DL Wholesale duct flanges are constructed of steel for durability, as well as powder coated to withstand rust that can form in humid environments. Offered in standard sizes including 4", 6", 8" 10" and 12". Duct flanges are meant for use with DL Air Duct, DL Light Proof Ducting, DL Insulated Ducting, and Terra Duct (as well as other standard sized ducting). These flanges have predrilled holes for attaching to sheet rock as well as plywood walls and also include an additional steel ring and bolt set for connecting to sheet metal duct work. DL duct flanges have rounded edges to make them easy and safe to work with and install.
$8.25
-
AC Infinity AC Infinity Backdraft Damper Ducting Insert -Black Galvanized Steel 4"
An antidraft duct insert designed for use with range hoods, bathroom fans and other home HVAC applications. Features outer rubber gaskets that create an airtight seal and grip between the damper and ducts. Mounts horizontally or vertically to prevent backflow and debris from entering ducting. Galvanized steel body with spring-loaded aluminum damper blades that open with minimal airflow. Fit for 4 in. Duct Openings | Product Length: 5.03 inches | Finish: Powder Coat Product Description A ventilation ducting tool designed for insertion into 4” ducting to prevent cold drafts and debris from flowing into ventilation systems. Built to be embedded in ducts, the backdraft damper is made of sturdy galvanized steel and features two rings of outer rubber gaskets. This enables it to grip your ducting with an airtight seal in either a horizontal or vertical orientation. The butterfly damper blades are made of aluminum and are equipped with a light spring that folds with minimal airflow. Applications The spring-loaded antidraft damper is built for heavy-duty performance in applications like overhead range hoods in kitchens, bathroom fans and tumble dryers. It can be fully or partially inserted into your duct work using the rubber rings to hold itself in place. Other one-way airflow uses include keep pilot lights burning in water heaters and keeping debris from entering inline duct fans in grow tents.
$17.99
-
AC Infinity AC Infinity Backdraft Damper Ducting Insert -Black Galvanized Steel 6"
An antidraft duct insert designed for use with range hoods, bathroom fans and other home HVAC applications. Features outer rubber gaskets that create an airtight seal and grip between the damper and ducts. Mounts horizontally or vertically to prevent backflow and debris from entering ducting. Galvanized steel body with spring-loaded aluminum damper blades that open with minimal airflow. Fit for 6 in. Duct Openings | Product Length: 5.03 inches | Finish: Powder Coat Product Description A ventilation ducting tool designed for insertion into 6” ducting to prevent cold drafts and debris from flowing into ventilation systems. Built to be embedded in ducts, the backdraft damper is made of sturdy galvanized steel and features two rings of outer rubber gaskets. This enables it to grip your ducting with an airtight seal in either a horizontal or vertical orientation. The butterfly damper blades are made of aluminum and are equipped with a light spring that folds with minimal airflow. Applications The spring-loaded antidraft damper is built for heavy-duty performance in applications like overhead range hoods in kitchens, bathroom fans and tumble dryers. It can be fully or partially inserted into your duct work using the rubber rings to hold itself in place. Other one-way airflow uses include keep pilot lights burning in water heaters and keeping debris from entering inline duct fans in grow tents.
$19.99
-
AC Infinity AC Infinity Backdraft Damper Ducting Insert -Black Galvanized Steel 8"
An antidraft duct insert designed for use with range hoods, bathroom fans and other home HVAC applications. Features outer rubber gaskets that create an airtight seal and grip between the damper and ducts. Mounts horizontally or vertically to prevent backflow and debris from entering ducting. Galvanized steel body with spring-loaded aluminum damper blades that open with minimal airflow. Fit for 8 in. Duct Openings | Product Length: 5.03 inches | Finish: Powder Coat Product Description A ventilation ducting tool designed for insertion into 8” ducting to prevent cold drafts and debris from flowing into ventilation systems. Built to be embedded in ducts, the backdraft damper is made of sturdy galvanized steel and features two rings of outer rubber gaskets. This enables it to grip your ducting with an airtight seal in either a horizontal or vertical orientation. The butterfly damper blades are made of aluminum and are equipped with a light spring that folds with minimal airflow. Applications The spring-loaded antidraft damper is built for heavy-duty performance in applications like overhead range hoods in kitchens, bathroom fans and tumble dryers. It can be fully or partially inserted into your duct work using the rubber rings to hold itself in place. Other one-way airflow uses include keep pilot lights burning in water heaters and keeping debris from entering inline duct fans in grow tents.
$24.99
-
AC Infinity AC Infinity Flexible Four-Layer Ducting, 25-Ft Long, 6-Inch
Designed for ventilation applications including HVAC, dryer, grow rooms and tents. Four layer design makes it more durable and resistant to leaks, tears, and cuts. Steel-wire spiral structure is flexible and easy-to-install in hard to reach places. Constructed of Aluminum and thermoplastic, tube can be shortened for various applications. Ducting Size: 6” | Length: 25 feet | Includes two stainless steel 6 inch duct clamps PRODUCT DESCRIPTION This ducting is designed for various ventilation, circulation, and heating/cooling transfer applications. It features four-layer protection, making it more durable and resistant to leaks than single-layer designs. The internal layer is made of heavy-duty dual aluminum foil that is fire/flame resistant. Its outer layer utilizes dual PVC thermoplastic that protects the aluminum from cuts and tears while stopping leakage. Each duct tube is held together by an internal steel-wire spiral that is flexible and easy to install in hard to reach places. The ducting can be shortened by cutting the tube to fit various applications. Includes two stainless steel duct clamps. APPLICATIONS Primarily used with duct fan systems in various air circulation and ventilation projects including hydroponic grow rooms and tents, bathrooms and attics, heating and cooling transportation, and other installations. It is also used to cool AV equipment rooms, closets, racks, and cabinets.
$24.99
-
AC Infinity AC Infinity Flexible Four-Layer Ducting, 25-Ft Long, 4-Inch
Designed for ventilation applications including HVAC, dryer, grow rooms and tents. Four layer design makes it more durable and resistant to leaks, tears, and cuts. Steel-wire spiral structure is flexible and easy-to-install in hard to reach places. Constructed of Aluminum and thermoplastic, tube can be shortened for various applications. Ducting Size: 4” | Length: 25 feet | Includes two stainless steel 4" duct clamps PRODUCT DESCRIPTION This ducting is designed for various ventilation, circulation, and heating/cooling transfer applications. It features four-layer protection, making it more durable and resistant to leaks than single-layer designs. The internal layer is made of heavy-duty dual aluminum foil that is fire/flame resistant. Its outer layer utilizes dual PVC thermoplastic that protects the aluminum from cuts and tears while stopping leakage. Each duct tube is held together by an internal steel-wire spiral that is flexible and easy to install in hard to reach places. The ducting can be shortened by cutting the tube to fit various applications. Includes two stainless steel duct clamps. APPLICATIONS Primarily used with duct fan systems in various air circulation and ventilation projects including hydroponic grow rooms and tents, bathrooms and attics, heating and cooling transportation, and other installations. It is also used to cool AV equipment rooms, closets, racks, and cabinets.
$21.99
-
AC Infinity AC Infinity Flexible Four-Layer Ducting, 25-Ft Long, 10-Inch
Designed for ventilation applications including HVAC, dryer, grow rooms and tents. Four layer design makes it more durable and resistant to leaks, tears, and cuts. Steel-wire spiral structure is flexible and easy-to-install in hard to reach places. Constructed of Aluminum and thermoplastic, tube can be shortened for various applications. Ducting Size: 10” | Length: 25 feet | Includes two stainless steel 10" duct clamps PRODUCT DESCRIPTION This ducting is designed for various ventilation, circulation, and heating/cooling transfer applications. It features four-layer protection, making it more durable and resistant to leaks than single-layer designs. The internal layer is made of heavy-duty dual aluminum foil that is fire/flame resistant. Its outer layer utilizes dual PVC thermoplastic that protects the aluminum from cuts and tears while stopping leakage. Each duct tube is held together by an internal steel-wire spiral that is flexible and easy to install in hard to reach places. The ducting can be shortened by cutting the tube to fit various applications. Includes two stainless steel duct clamps. APPLICATIONS Primarily used with duct fan systems in various air circulation and ventilation projects including hydroponic grow rooms and tents, bathrooms and attics, heating and cooling transportation, and other installations. It is also used to cool AV equipment rooms, closets, racks, and cabinets.
$48.99
-
Atmosphere ProFilter 6" Flange
These flanges are made from high impact polycarbonate and are designed to be twist-locked into the PROfilters no tools required. Contains flange. End cap included with filter.Fits all PROfilter reversible filters
$26.99
-
DL Wholesale 10'' Straight Duct Connector
Made of galvanized steel these connectors have pre-installed exterior rubber gaskets for a perfect, airtight fit.
$14.75
-
Active Air Active Air Premium Ducting 4"X25'
Active Air Premium Ducting is made of tough 3-ply aluminum foil laminate. It is designed for air-cooling and can be used in different forms of heating and ventilation applications. This product is made to resist puncture and tears. One continuous and corrosion resistant helix wire is placed in the duct wall for structural support. Active Air Premium Ducting is perfect for the air-cooled reflectors in your grow room.Includes (2) EZ Turn duct clampsAir Pressure: Max 25 mm WG (2500 Pa or 10" WG)Air Velocity: Max 25 mm/sec (4900 ft/min)
$20.61
-
Active Air Active Air Premium Ducting 12"X25'
Active Air Premium Ducting is made of tough 3-ply aluminum foil laminate. It is designed for air-cooling and can be used in different forms of heating and ventilation applications. This product is made to resist puncture and tears. One continuous and corrosion resistant helix wire is placed in the duct wall for structural support. Active Air Premium Ducting is perfect for the air-cooled reflectors in your grow room.Includes (2) EZ Turn duct clampsAir Pressure: Max 25 mm WG (2500 Pa or 10" WG)Air Velocity: Max 25 mm/sec (4900 ft/min)
$56.51
-
DL Wholesale Backdraft Damper - 8"
Made of galvanized steel, these dampers prevent air leakage into your fan setup. They are easy to install, fit directly onto the ducting, and prevent a backdraft of air when the fans are switched off. (OBSOLETE)
$26.00
You have seen 24 out of 72 products