Dehumidifiers
-
Spider Farmer Spider Farmer 32 Pint Smart Dehumidifier with App Control & Drain Hose
Spider Farmer's 32-pint compressor dehumidifier is sized for grow tents up to 5' x 5'. Set a humidity target from 30 to 80% RH and it holds it, collecting into a 0.5-gallon tank or draining continuously through the included hose. An RJ12 connection and temperature/humidity sensor wire let a Spider Farmer GGS controller or power strip run it with the rest of the tent from the app. Capacity: 32 pints/day (at 95 °F, 90% RH) Coverage: grow tents up to 5' x 5' Humidity range: 30–80% RH · operating temperature 41–95 °F Power: 230 W ±5% · 120 V, 60 Hz Noise: 40 dB or less Water tank: 0.5 gal (2.1 L), or continuous drain hose Size: 11.8" x 7.9" x 19.1" (30 x 20 x 48.5 cm) · 59" (150 cm) air duct · 98" (250 cm) power cord Net weight: 11.3 kg (24.9 lb) In the box: dehumidifier with power cord, connecting components, temperature/humidity sensor wire, air duct, drain pipe.
$209.99
-
Mars Hydro Mars Hydro 38 Pint (18L/Day) Compressor Dehumidifier for Grow Tents, RJ12 Smart Port
Mars Hydro's compressor dehumidifier pulls up to 38 pints (18 L) of water a day, enough for a grow tent up to 5' x 5' or an enclosed room up to about 300 sq ft. Empty the 2.1 L tank or run the hose for continuous drainage, and plug it into a Mars Hydro iControl or iHub Pro to manage humidity and VPD from the app. Removes up to 38 pints (18 L) a day Coverage: grow tents up to 5' x 5'; enclosed spaces up to 300 sq ft depending on conditions 2.1 L water tank with full-tank shut-off and warning light, or continuous drainage through the included hose Modes: HOLD, CONT, DRY and FAN, plus a 24-hour timer Auto-restart memory, automatic defrost and anti-freeze protection RJ12 port for app control through a Mars Hydro iControl or iHub Pro (sold separately) 120 V · 1-year warranty In the box: Dehumidifier with power cord, long flexible air duct (30.5 cm), short flexible air duct (22 cm), 150 cm drain hose, temp & humidity sensor.
$209.99
-
AC Infinity AC Infinity HYDRONE 7, Plant Dehumidifier with AI-Powered Humidity VPD Controller, for 4-6 Plants
HYDRONE 7 is a tent-ready dehumidifier built for 4–6 plant grows. A PWM rotary motor gives 10 drying levels with instant on/off response, it keeps working in hot or very cold rooms, and the onboard humidity/VPD controller with corded sensor and AI programming adjusts drying output for you. Coverage: up to 4–6 plants 10 drying levels from a PWM-controlled rotary motor; can bring humidity down to 25% RH Onboard humidity and VPD controller with corded sensor and AI programming Dual 6" duct ports: exhaust dry air into a tent, with an optional intake port for closed-loop use Internal 0.5-gallon (2 L) reservoir with optional gravity drain hose Integrated UIS port for smart controllers and Wi-Fi app access (automations, data charts, alerts) 11.45" x 14.05" x 24.44" · 235–610 W, 120 V AC, 60 Hz
$259.00
-
Ideal-Air Ideal-Air™ 60 Pint Pro Series Dehumidifier - 60pt (7.5gal) Capacity per Day
Ideal-Air™ Pro Series 60 Pint Dehumidifier has automatic restart if power is lost. Easy-to-use digital display humidity readings, internal condensate pump, removable washable filter, 1 speed fan motor, powder-coated metal casing for long life and a heavy-duty compressor. Built-in defrost that is designed for operation down to 41. Set upright on their feet for 3 hours prior to use. Ideal-Air™ recommends that dehumidifiers use surge protectors and a dedicated electrical circuit. In the event of a power failure, a spike in voltage may occur when the power is reinstated. This can damage the circuit board, which is not covered under warranty. Capacity: (24 hrs.) 60 pints (86°F, 80% RH) Temperature Range: 41°F–95°F Power: 520 Watt Current: 4.6 Amps Voltage/Frequency: 115 V 1 Phase 60 Hz
$998.13
-
Ideal-Air Ideal-Air™ Pro Series Dehumidifier - 100 Pint (13gal)
Ideal-Air™ Pro Series 100 Pint Dehumidifier has automatic restart if power is lost. Easy-to-use digital display humidity readings, internal condensate pump, removable washable filter, 1 speed fan motor, powder-coated metal casing for long life and a heavy-duty compressor. Built-in defrost that is designed for operation down to 41. Set upright on their feet for 3 hours prior to use. 100 pint unit: Temp. Range: 41-95° F, condensation removal: (24 hrs.) 100 pints (86, 80% RH); Power: 6.75 Amps/728 W; Supply Voltage: 115 V - 1 Phase - 60 Hz; R410A. Ideal-Air™ recommends that dehumidifiers use surge protectors and a dedicated electrical circuit. In the event of a power failure, a spike in voltage may occur when the power is reinstated. This can damage the circuit board, which is not covered under warranty. Temperature Range: 41°F-95°F Voltage/Frequency: 115V/60 Hz Single - Phase 1 Power: 6.75 Amps/728 W Refrigerant: R410A Hydrofluorocarbon (HFC) Refrigerant Blend of Difluoromethane (CH2F2) and Pentafluoroethane (CHF2CF3)
$1,305.35
-
Quest *NEW* Quest Hi-E Dry 140 Portable Dehumidifier - 135 Pints/Day - 110-120V - R-454B Refrigerant - Merv 10 Filtration
The Quest Hi-E Dry 140 is a compact, portable dehumidifier for drying rooms, grow spaces, basements and restoration work. It removes up to 135 pints per day at 80°F/60% RH on a standard 110-120V outlet, with a MERV 10 filter, 12 in wheels and a retractable handle, a 25 ft cord and a 3/8 in push-to-connect drain for continuous operation. Running on R454B refrigerant, the Hi-E Dry 140 is engineered by Quest (Therma-Stor) in Madison, Wisconsin.Specifications @ 80°F/60% RHCapacity: 135 Pints/DayPower: 780 WPower Cord: NEMA 5-15P, 25 ftSupply Voltage: 110-120 VCurrent Draw: 6.8 AmpsBlower: 300 CFMBTU (Total): 8850Operating Temperature: 56-95° FEfficiency: 7.2 Pints/kWhAir Filter Rating: Merv 10Filter Size: 12in x 14in x 1inRefrigerant: R454BRefrigerant Charge: 19ozDrain Port Connection: 3/8in Push-to-ConnectDimensions: 20in x 24.5in x 18in (handle collapsed)Weight: 85 lbsShipping: 29in x 23in x 20in, 90 lbs
$3,999.95
-
Quest *NEW* Quest Hi-E Dry 195 Portable Dehumidifier - 195 Pints/Day - 110-120V - R-454B Refrigerant - Merv 11 Filtration
The Quest Hi-E Dry 195 is a portable, high-efficiency dehumidifier built for drying rooms, large grow spaces, basements and commercial applications. It removes up to 195 pints per day at 80°F/60% RH on standard 110-120V power, with a MERV 11 filter, a rugged steel cabinet, built-in handle and wheels, and a 3/4 in threaded drain for continuous operation. Now running on R454B refrigerant, the Hi-E Dry 195 is engineered and assembled in Madison, Wisconsin and backed by a 5-year limited warranty.Specifications @ 80°F/60% RHCapacity: 195 Pints/DayPower: 1385 WPower Cord: NEMA 5-20P, 10 ftSupply Voltage: 110-120 VCurrent Draw: 12 AmpsBlower: 610 CFMBTU (Total): 13400Operating Temperature: 56-95° FEfficiency: 6.1 Pints/kWhAir Filter Rating: Merv 11Filter Size: 16in x 20in x 2inRefrigerant: R454BRefrigerant Charge: 28ozDrain Port Connection: 3/4in Threaded NPTDimensions: 19in x 20in x 42inWeight: 130 lbsShipping: 24in x 26in x 47in, 145 lbsWarranty: 5-year limited
$4,399.95
-
Quest Quest Air Filter for PowerDry 4000, CDG174 and Dual Overhead 105, 155, 165, 205, 225 Dehumidifiers
Replacement MERV-11 filter for the Quest PowerDry 4000, CDG174 and Dual 105, 155, 165, 205 and 225 Dehumidifiers. Captures particles (including mold spores) down to 1 micron. Filter size is 20 in x 16 in x 2 in.
$25.00
-
Anden Anden 5770 Replacement filter for Anden Dehumidifier Model A95F
Anden dehumidifiers are designed for maximum growth. The 5770 Multi-Pleat 11 is produced with a highly specialized, dual layered 100% synthetic media, specifically for use in Anden dehumidifiers. The Anden 5770 is composed of an upstream electrostatically enhanced layer (the E-Layer), and a downstream mechanical layer (the M-Layer). This replacement filter is easy to install, with no assembly or reinforcements to worry about. Protect your equipment for optimal performance. • INCLUDES: (1) Replacement filter for ANDEN Dehumidifier Model: A95F • DIMENSIONS: 12 x 12 x 1 • MERV 11 Filter for Superior Equipment Protection • Upgraded protection from standard pleated filters • High holding capacity • Anden Dehumidifiers are designed with easy access for simple filter changes
$40.00 $36.00
-
Anden Anden Dehumidifier - Movable - 100 pints/day
No matter the size, every successful grow operation requires professional humidity control. The Anden Model A100Fremoves 100 pints per day of moisture from the air, helping control humidity in smaller grow spaces.In addition to its capacity, the A100Ffeatures integration with smart controls and a 5-year warranty. Don’t trust your harvest to inferior retail units. Anden is the professional’s choice for true humidity control. Features 100 Pints/day - Industrial-level humidity control for small grow operations Energy Efficient Removes up to 2.6 liters per kilowatt hour, helping keep your operation efficient No-Hassle Drainage The positive pressure drain removes the need for a drain trap. Just proper drainage, with no monitoring required MERV 11 Filter The self-sealing air filter traps up to 95% of pollutants from the air to protect your plants and the unit’s vital components. Plus,it’s easy to replace Flexible Installation Options for suspended or freestanding installation Built-in Digital Control The on-board controls include a digital display for intuitive operation and monitoring Optional Remote Control Purchase the Model A77 remote control to relay diagnostics from the dehumidifier, giving you simple control of the conditions in your cultivation space (other options available) 1-2-3 for VPD - The unit constantly monitors humidity, making it simple to reach the optimal Vapor Pressure Deficit for maximum growth Built to Last - Dependability is at the heart of what Anden does. That’s why they offer a 5-year warranty on all parts including the refrigeration system - so you can grow with confidence Whether you are starting seedlings, rooting cuttings or drying, humidity control is critical. Humidity rising above 60% can lead to molds, mildews, and other unwanted biological growth. High humidity can also prevent plants from properly taking in CO2, preventing efficient photosynthesis. Anden helps create an environment that drives transpiration at an optimal rate, while helping prevent disease outbreaks. Humidity and Growth Humidity control is critical. As a cultivator, you know that. Each stage of growth requires an optimized environment. That’s why we recommend keeping humidity under 60% to prevent mold and mildew, and to help plants get the CO2they need for efficient photosynthesis. Vapor Pressure Deficit For optimal indoor growth, don’t forget about VPD. It’s a measure of the difference between vapor pressure in the leaves of your plants and the air surrounding them. Humidity control in the growth environment helps ensure that plants can “breathe” by taking in moisture and letting it out. The Anden Impact Anden dehumidifiers put you in control of your growth environment. You get maximum moisture removal and VPD control, with on-board and remote monitoring capabilities to make it all intuitive. Simply put, these grow-optimized products are designed with your plants in mind. Installation Options Cultivation rooms come in all shapes and sizes. This Anden Dehumidifier gives you flexible installation options to ensure maximum effectiveness and optimized conditions. MOVABLE – Operates within the cultivation room Humid air is pulled into the dehumidifier Air is dehumidified and returned to the space Optimizes humidity, temperature, and CO2 for maximum growth
$2,005.99 $1,608.70
-
Innovative Solutions Defender DXB 50 with BPI
Defender DXB 50 has been designed and engineered to deliver sanitization that is proven to reduce & eradicate surface and airborne pathogens for high load environments in Cannabis Cultivation Centers using the ProGuard ™ Sanitization Technology. Defender DXB 50 is easy to install and maintain as it operates 24/7 in Cannabis facilities. ProGuard Sanitization has been tested and validated by reputable labs across the world to ensure safety and effectiveness in reducing mold, mildew, bacteria, viruses, voc’s and other dangerous pathogens. Applications Include: indoor grow rooms, greenhouses, dry rooms, and more.
$1,149.00
-
Ideal-Air Ideal-Air Dehumidifier 30 Pint
The Ideal-Air Dehumidifiers are now rated at AHAM standards (80F, 60% Relative Humidity). There is no change to the unit itself, only to the temperature and humidity at which the reading is being taken from. Previously they were rated at a higher temperature and humidity level based on hydroponic industry standard usage (86F, 80% Relative Humidity). They will now be rated at AHAM standards based on the recent US Department of Energy ruling. 700830 - Previously 30 Pint @ 86F, 80% RH, now 22 Pint @ 80F, 60% RH 700826 - Previously 50 Pint @ 86F, 80% RH, now 30 Pint @ 80F, 60% RH 700830 - Previously 80 Pint @ 86F, 80% RH, now 50 Pint @ 80F, 60% RH Quick maintenance with easy filter access that is removable and washable. Low temperature defrosting. Easy to move with built-in handles and wheels. Easy-to-use LED display panel. Removable water tank with an automatic shutoff when reservoir is full. The reservoir for the dehumidifiers is 6 liters or 12.5 pints. Can be plumbed for permanent drainage. 22 Pint is 4.0 Amps/420 W. 30 Pint is 4.7 Amps/520 W. 50 Pint is 6.9 Amps/720 W. 115 V.
$378.27 $340.44
-
Anden Anden Low Profile Condensate Pump with 20" Condensate Hose
The Anden 4856 Dehumidifier Pump Accessory Kit provides a simple solution to empty excess water from the unit. The Dehumidifier Pump Kit will provide a quick burst of pumping action when the water reaches a certain point in the pumps well area. The Pump Kit pumps the water up a hose and out to wherever you route the hose to. The Anden 4856 Dehumidifier Pump Kit Accessory includes a low profile condensate pump and a 20' drain tube.
$145.00
-
Quest Quest Supply Air Duct Collar for Overhead Style Dehumidifier - 105, 155, 205, & 225
This accessory allows a limited amount of ductwork to be attached to the air outlet on Quest Dual dehumidifiers. This allows the dehumidifier to be located outside of the indoor garden. Be sure to also purchase the return/intake air attachment to attach ductwork to the air intake and pull moist air out of the garden. This 10 in flange fits Dual 105, 155, 165, 205 and 225 only.
$100.00
-
Quest Quest Return Air Duct Collar for Overhead Style Dehumidifier - 105, 155, 205, & 225
This accessory allows a limited amount of ductwork to be attached to the intake on Quest Dual dehumidifiers. This allows the dehumidifier to be located outside of the indoor garden. Be sure to also purchase the supply air attachment to attach ductwork to the air outlet and send dry air back into the garden. This 12 in flange fits Dual 105, 155, 165, 205 and 225 only.
$142.00
-
TrolMaster Hydro-X Humidstat Station (for dehumidifier w/24v terminal)
HS-1 Humidistat Station is specifically designed to control dehumidifier in the Hydro-X Control System. It will control your dehumidifier by Day/Night setpoint base on the photocell status. Connect the HS-1 to where your thermostat is on the wall by using the preexisting wires, now you can use the HS-1 in conjunction with the Hydro-X to control dehumidifier easily.
$139.00 $132.05
-
Innovative Solutions Defender DXB 100 with BPI
Defender DXB 100 with BPI has been designed and engineered to deliver sanitization that is proven to reduce & eradicate surface and airborne pathogens for high load environments in Cannabis Cultivation Centers using the ProGuard Sanitization Technology. Defender DXB 100 with BPI is easy to install and maintain as it operates 24/7 in Cannabis facilities. ProGuard Sanitization has been tested and validated by reputable labs across the world to ensure safety and effectiveness in reducing mold, mildew, bacteria, viruses, voc’s and other dangerous pathogens.
$1,149.00
-
Innovative Solutions Defender DXB Mini with BPI
Defender DXB Mini with BPI has been designed and engineered to deliver sanitization that is proven to reduce & eradicate surface and airborne pathogens for high load environments in Cannabis Cultivation Centers using the ProGuard Sanitization Technology. Defender DXB Mini with BPI is easy to install and maintain as it operates 24/7 in Cannabis facilities. ProGuard Sanitization has been tested and validated by reputable labs across the world to ensure safety and effectiveness in reducing mold, mildew, bacteria, viruses, voc’s and other dangerous pathogens.Applications Include: indoor grow rooms, greenhouses, dry rooms, and more
$599.00
-
Anden Anden Industrial Dehumidifier - 100 pints/day
No matter the size, every successful grow operation requires professional humidity control. The Anden Model A100 removes 100 pints per day of moisture from the air, helping control humidity in smaller grow spaces.In addition to its capacity, the A100 features integration with smart controls and a 5-year warranty. Don’t trust your harvest to inferior retail units. Anden is the professional’s choice for true humidity control. Features 100 Pints/day – Industrial-level humidity control for small grow operations Energy Efficient Removes up to 2.6 liters per kilowatt hour, helping keep your operation efficient No-Hassle Drainage The positive pressure drain removes the need for a drain trap. Just proper drainage, with no monitoring required MERV 11 Filter The self-sealing air filter traps up to 95% of pollutants from the air to protect your plants and the unit’s vital components. Plus,it’s easy to replace Flexible Installation Options for suspended, freestanding, or ducted installation-Built-in Digital Control The on-board controls include a digital display for intuitive operation and monitoring Optional Remote Control – Purchase the Model A77 remote control to relay diagnostics from the dehumidifier, giving you simple control of the conditions in your cultivation space (other options available) 1-2-3 for VPD – The unit constantly monitors humidity, making it simple to reach the optimal Vapor Pressure Deficit for maximum growth Built to Last –Dependability is at the heart of what Anden does. That’s why they offer a 5-year warranty on all parts including the refrigeration system – so you can grow with confidence Whether you are starting seedlings, rooting cuttings or drying, humidity control is critical. Humidity rising above 60% can lead to molds, mildews, and other unwanted biological growth. High humidity can also prevent plants from properly taking in CO2, preventing efficient photosynthesis. Anden helps create an environment that drives transpiration at an optimal rate, while helping prevent disease outbreaks. Humidity and Growth Humidity control is critical. As a cultivator, you know that. Each stage of growth requires an optimized environment. That’s why we recommend keeping humidity under 60% to prevent mold and mildew, and to help plants get the CO2they need for efficient photosynthesis. Vapor Pressure Deficit For optimal indoor growth, don’t forget about VPD. It’s a measure of the difference between vapor pressure in the leaves of your plants and the air surrounding them. Humidity control in the growth environment helps ensure that plants can “breathe” by taking in moisture and letting it out. The Anden Impact Anden dehumidifiers put you in control of your growth environment. You get maximum moisture removal and VPD control, with on-board and remote monitoring capabilities to make it all intuitive. Simply put, these grow-optimized products are designed with your plants in mind. Installation Options Cultivation rooms come in all shapes and sizes. This Anden Dehumidifier gives you flexible installation options to ensure maximum effectiveness and optimized conditions. SUSPENDED –Saves space in any cultivation room Uses Model 5660 hanging kit to suspend unit from ceiling Pulls in air, dehumidifies, and returns it to the space Optimizes humidity, temperature, and CO2 for maximum growth INLET AND OUTLET DUCTED –For rooms with limited space Located in separate room, connected by air ducts to cultivation room Ducted with 10” flex duct or hard pipe Optimizes humidity, temperature, and CO2 for maximum growth
$1,999.95
-
Anden Anden Industrial Dehumidifier - 130 Pints/Day
Grow environments require high-capacity, specially-designed dehumidifiers to control humidity and protect crops. The Anden Model A130 delivers performance, capacity and reliability that is not available from the portable units sold via retail. With 130 pints per day removal capacity, integration with smart controls and a 5-year warranty, you can trust Anden to protect your crop. The Model A130 can also be programmed to circulate air within a grow facility. Proper air flow carries moisture away from the plants, helping to prevent fungus, disease and plant pests from damaging the crop. Circulating the air also maximizes the application of CO2 in the grow facility. Optional Control – (Model A76) Digital Dehumidifier Control • Dedicated monitoring and control of each dehumidifier at canopy height Optional Remote Monitors -(Model 8082) Temperature/Humidity Sensor Module • Reports temperature and RH values back to the dehumidifier control module Optional Wi-Fi Thermostats – (Model 8840), (Model 8830), (Model 8820) • Control and monitor climate conditions in your grow room 24/7/365 from anywhere Optional Hanging Kit – DH35660 (Model 5691) Features: Control: Built-in digital control with display Control mounting option: Field interchangeable from top to front Cabinet insulation: ½" EPS Air discharge orientation: Top or end Inlet/Outlet duct collars: 10" diameter Backdraft damper at outlet: Included Filter Washable: MERV 8 Refrigerant: R410A Coil type: E-coated Power cord length: 8' Discharge air temperature rise 10°F–30°F Drain connection: ¾" MNPT threaded Moveable with casters Warranty: 5 years
$2,567.99 $2,311.19
-
Anden Anden Grow-Optimized Industrial Dehumidifier - 210 Pints/Day 240v
210 Pints Per Day. Anden A210V1 Dehumidifier is designed and built for grow, with materials proven to perform in the extreme conditions of the grow room environment. Utilizing Anden Dehumidifiers for your grow facility will help you achieve your desired humidity balance for maximum growth potential. Better. Removes up to 3 liters per kilowatt hour, for maximum energy efficiency. Faster. Quickest commercial dehumidifier to reach peak power for maximum moisture removal. Smarter. Most intelligent dehumidifier in its class, with on-board and remote monitoring, sensing & diagnostics. Anden advanced features: Positive pressure drain allows proper drainage without the need for a drain trap, providing for trouble free operation Self-sealing air filter for efficient protection of components; with easy access for replacement Included hanging kit doubles as lifting handles, provides easy, flexible installation Pre-installed electrical plug is easily removable for hard wired application, providing flexible installations Float switch terminals for easy set-up 76 remote control communicates with the dehumidifier, relaying all diagnostics from the dehumidifier to the control display; simple to monitor Whether you are starting seedlings, rooting cuttings or drying, humidity control is critical. Humidity rising above 60% can lead to molds, mildews, and other unwanted biological growth. High humidity can also prevent plants from properly taking in CO2, preventing efficient photosynthesis. Anden helps create an environment that drives transpiration at an optimal rate, while helping prevent disease outbreaks. 210V1 SPECS: Capacity: 210 PPD Energy Factor: 3.0 L/kWh / 6.3 pints/kWh Voltage: 208–240VAC, 1 Phase, 60 Hz BTU: 2,036 Current draw (amps)(1): 7.15 Power (watts)(1): 1,487 Weight: 118 lbs. Width: 19½" - Height: 18¾" - Length: 30⅛" Warranty: 5 Years on all parts INCLUDED ITEMS: Dehumidifier Filter Leveling Feet Hanging Brackets A76 Control Drain Fitting Drain Tubing Thermostat wire Screw driver
$3,332.95
-
Anden Anden Industrial Dehumidifier - 70 pints/day
For hobbyists or smaller grow operations, the Anden Industrial Dehumidifier Model A70 is the perfect solution. Small, efficient and reliable, the A70 removes an impressive 70 pints per day of moisture from the air. Your crop’s quality is essential and the A70 was designed with healthy crops in mind. Trust the professional brand with solutions built specifically for indoor growing environments. The Model A70 can also be programmed to circulate air within a grow facility. Proper air flow carries moisture away from the plants, helping to prevent fungus, disease and plant pests from damaging the crop. Circulating the air also maximizes the application of CO2 in the grow facility. Optional Control – DH20076 (Model A76) Digital Dehumidifier Control • Dedicated monitoring and control of each dehumidifier at canopy height Optional Remote Monitors - DH18082 (Model 8082) Temperature/Humidity Sensor Module • Reports temperature and RH values back to the dehumidifier control module Optional Wi-Fi Thermostats – DH58840 (Model 8840), DH58830 (Model 8830), DH58820 (Model 8820) • Control and monitor climate conditions in your grow room 24/7/365 from anywhere Optional Hanging Kit – DH35660 (Model 5660) Features: Control: Front mount only Air discharge orientation: End of cabinet only Duct collars: 8" Backdraft damper: No Filter: ½" MERV 8 washable Refrigerant: R410A Coil type: Aluminum Power cord length: 8' Hardwire option: No Discharge air temperature rise: 10°F–30°F Drain connection: ¾" MNPT Threaded
$1,779.95
-
Quest Quest MERV 13 Filter 18" X 20" X 2" for Quest 506, 506 277V, 746, and 876
Quest MERV 13 Filter 18" X 20" X 2" for Quest 506, 506 277V, 746, and 876 Superior MERV13 filtration removes more harmful contaminants from the air such as dust, pollen, mold, bacteria, and some viruses to prevent cross-contamination and unhealthy conditions. MERV13 filtration is 65% more effective in capturing dangerous particulates from the air than MERV-8, and still 20% more effective than MERV11 filters. The MERV-13 air filter for the Quest 506/746/876 dehumidifier is essential for keeping your air safer and the internal components of your machine cleaner for long-lasting performance. Requires two per unit. Dimensions: 18″x 20″ x 2″
$48.75
-
Quest Quest 5 Series Dehumidifier Hanging Bracket - For Quest 5 Series Dehumidifiers
Hanging your Quest dehumidifier is made easy with the Quest 5 Series Hang Kit. Now you can free up valuable floor space by suspending your Quest dehumidifier from above with this kit specially designed for Quest's 5 Series of dehumidifiers. Hanging your dehumidifier protects it from potential flooding, offers the flexibility of freeing up floor space, and it provides additional height for proper condensate drainage. This kit can be set up by one person and features 4 adjustable, heavy-duty ratchet straps-each able to hold up to 150 pounds. Product material and design are subject to change. Compatible with Quest Dual 105, Quest Dual 155, Quest 155 50 Hz, Quest Dual 165, Quest 185 Cool, Quest Dual 205, and Quest Dual 225 Dehumidifiers.
$30.00
You have seen 24 out of 37 products