Lighting Accessories
-
Light Rail Light Rail Auxiliary Trolley with Extreme Duty Wheels, LightRail 3.0-4.20
The same Auxiliary Trolley used in the Add-A-Lamp kit, sold on its own. Use it to carry a second light, or to support vent tubing and power cords so they travel with the motor. Extreme Duty trolley wheels, rated to 60 lb Trolley only, no hardware Works with LightRail 3.0, 3.5, 4.0 and 4.20
$39.00
-
Light Rail Light Rail RoboBar 34" x 30" Stabilizer for Large LED Grow Lights
The RoboBar lets a LightRail 3.5 or 4.0 motor carry a larger LED fixture smoothly. Its 34" x 30" frame hangs the light from four corners at steep, triangulated angles, so a big, flat LED doesn't swing as it moves. 34" x 30" (86 x 75 cm) Two outriggers, one center bar, two heavy-duty T-bar connectors and four corner eye screws Two individually secured connectors to the motor, with Nyloc nuts For LightRail 3.5 and 4.0 motors Motor, rail and light not included
$99.00
-
Light Rail Light Rail 4.0 AdjustaDrive Light Mover Kit with RoboBar for Large LEDs
A LightRail 4.0 AdjustaDrive kit paired with the RoboBar for moving larger LED fixtures. Variable speed from 2 to 4 feet per minute, and the RoboBar's triangulated hanging points keep a big, flat LED from swinging as it travels. LightRail 4.0 AdjustaDrive motor: 2 to 4 ft per minute, 0 to 60 second pause at each end Two-piece 2 m (6'6") rail, hardware and instructions RoboBar: 34" x 30" (86 x 75 cm) with two outriggers, center bar, two heavy-duty T-bar connectors and four corner eye screws Extreme Duty trolley wheels preinstalled, rated to 60 lb Grow light not included Made in the USA by Gualala Robotics; 2-year limited warranty on the motor
$349.00
-
Light Rail Light Rail 3.5 IntelliDrive Light Mover Kit with RoboBar for Large LEDs
A LightRail 3.5 IntelliDrive kit paired with the RoboBar, built to move larger LED fixtures. The RoboBar's triangulated hanging points keep a big, flat LED steady as it travels, so each light covers more of the room. LightRail 3.5 IntelliDrive motor: about 4 ft per minute, 0 to 60 second pause at each end Two-piece 2 m (6'6") rail, hardware and instructions RoboBar: two outriggers, center bar, two heavy-duty T-bar connectors and four corner eye screws Extreme Duty trolley wheels preinstalled, rated to 60 lb Grow light not included Made in the USA by Gualala Robotics; 2-year limited warranty on the motor
$299.00
-
Light Rail Light Rail Rail Hanger Brackets for Grow Tents and Greenhouses, 4-Pack
Rail Hanger Brackets are the easiest way to hang LightRail rail from the support bars of a grow tent or greenhouse. Pack of 4 with instructions and zip ties: two per rail, so one pack hangs two rails Fits tubing up to 1.5" in diameter Holds the rail perpendicular to the support bar For LightRail 3.0, 3.5, 4.0 and 4.20 rail
$19.95
-
Light Rail Light Rail Extreme Duty Trolley Wheel Kit, Rated 60 lb
Extreme Duty trolley wheels with sealed precision steel ball bearings. They've come standard on LightRail 3.5 and 4.0 motors and Auxiliary Trolleys since October 2020; for older motors they're the upgrade for heavier lights such as LEDs or lights with a built-in ballast. Rated to 60 lb per set Sealed precision steel ball bearings for humid grow rooms Lifetime warranty Works with LightRail 3.0, 3.5, 4.0 and 4.20
$23.00
-
Light Rail Light Rail RoboStik 24" Lamp Stabilizing Bar
The 24" RoboStik turns a horizontal grow light 90 degrees to the direction of travel, so the light sweeps a wider pattern as it moves along the rail. 24" stabilizing bar Hangs a horizontal light perpendicular to the rail Not needed when the light hangs parallel to the direction of travel Works with LightRail 3.0, 3.5, 4.0 and 4.20
$33.00
-
Light Rail Light Rail 5.0 Add-A-Bar Kit, Second Crossbar for LightRail 5.0
The Add-A-Bar Kit adds a second crossbar to a LightRail 5.0 system so one motor can carry more lights side by side. LightRail 5.0 Auxiliary Trolley Adjustable crossbar: 81", 87" or 93" wide Push/pull rod, mounting hardware and instructions A third crossbar also needs a 4 ft LightRail 5.0 Auxiliary Rail (sold separately) For LightRail 5.0 only
$146.00
-
Light Rail Light Rail 5.0 Side-by-Side Light Mover Motor Only, 4 RPM (No Rail)
The LightRail 5.0 motor alone, for LightRail 5.0 systems. Its high-torque 4 RPM drive and steel-on-steel carrier bearings move crossbars carrying several lights side by side or fore and aft. High-torque 4 RPM instrument-grade drive motor with ball-bearing output shaft Dual-drive "sure grip" design with steel-on-steel carrier bearings Moves up to 9 lights (6 with larger reflectors) on crossbars For LightRail 5.0 only; not compatible with 3.5, 4.0 or 4.20 parts Motor only: no rail, mounting hardware or switch stops included Made in the USA by Gualala Robotics
$349.00
-
Light Rail Light Rail 4.20 AdjustaDrive Light Mover Kit for 2 Lights
The LightRail 4.20 moves two grow lights inline with one motor. It pairs the variable-speed 4.0 AdjustaDrive motor and rail with a complete Add-A-Lamp kit, so a second light rides its own rail, linked to the motor by a push/pull rod. LightRail 4.0 AdjustaDrive motor: 2 to 4 ft per minute, 0 to 60 second pause at each end Two-piece 2 m (6'6") motor rail plus a second two-piece 2 m rail for the Add-A-Lamp 6 ft push/pull rod and Auxiliary Trolley for the second light Extreme Duty trolley wheels preinstalled, rated to 60 lb Hardware and instructions included Optional: Add-A-Lamp to RoboStik hardware, to hang the second light sideways with a RoboStik Made in the USA by Gualala Robotics; 2-year limited warranty
$309.00 - $313.20
-
Light Rail Light Rail 4.0 AdjustaDrive Light Mover Motor Only, Variable Speed (No Rail)
The LightRail 4.0 AdjustaDrive motor without rail, for growers who already have LightRail rail in place. Speed is adjustable from 2 to 4 feet per minute, with an adjustable pause at each end of the run. Adjustable speed: 2 to 4 ft (0.6 to 1.2 m) per minute 0 to 60 second adjustable time delay at each end Extreme Duty trolley wheels preinstalled, rated to 60 lb Includes switch stops, hardware and instructions Rail not included Made in the USA by Gualala Robotics; 2-year limited warranty
$192.00
-
Light Rail Light Rail 4.0 AdjustaDrive Light Mover Kit, Variable Speed Motor with 6'6" Rail
The LightRail 4.0 AdjustaDrive adds speed control to the light mover: set the motor anywhere from 2 to 4 feet per minute to suit your light and the length of the run, plus an adjustable pause at each end for even coverage. Adjustable speed: 2 to 4 ft (0.6 to 1.2 m) per minute 0 to 60 second adjustable time delay at each end of travel Adjustable travel distance with switch stops Extreme Duty trolley wheels preinstalled, rated to 60 lb Motor draws about 9 W In the box: motor, two-piece 2 m (6'6") rail, hardware and instructions Made in the USA by Gualala Robotics; 2-year limited warranty
$254.00
-
Light Rail Light Rail 3.5 IntelliDrive Light Mover Motor Only, 10 RPM (No Rail)
The LightRail 3.5 IntelliDrive motor on its own, for adding a second run to rail you already have or replacing an older motor. It moves a grow light about 4 feet per minute with an adjustable pause at each end of the rail. 10 RPM motor, about 4 ft (1.2 m) per minute 0 to 60 second adjustable time delay at each end Extreme Duty trolley wheels preinstalled, rated to 60 lb Includes switch stops, hardware and instructions Rail not included Made in the USA by Gualala Robotics; 2-year limited warranty
$178.00
-
Light Rail Light Rail 3.5 IntelliDrive Light Mover Kit, 10 RPM Motor with 6'6" Rail
The LightRail 3.5 IntelliDrive is Light Rail's most popular light mover. The 10 RPM motor carries your grow light back and forth along the rail at about 4 feet per minute, with an adjustable pause at each end so plants get even light from one end of the run to the other. Motor travels about 4 ft (1.2 m) per minute (10 RPM) 0 to 60 second adjustable time delay at each end of travel Adjustable travel distance with switch stops Extreme Duty trolley wheels preinstalled, rated to 60 lb (lifetime warranty on the wheels) Low-draw motor: about 5 W In the box: motor, two-piece 2 m (6'6") rail, hardware and instructions Made in the USA by Gualala Robotics; 2-year limited warranty
$209.00
-
California LightWorks California LightWorks SolarSystem Touch Screen Controller for SolarSystem LED Lights
The SolarSystem Controller is a touch screen that runs California LightWorks SolarSystem 1100, 550 and 275 LED fixtures. Set spectrum and timing for each stage of growth, save your programs, and let it handle sunrise and sunset transitions. One controller can run any number of lights. Compatible with SolarSystem 1100, 550 and 275 fixtures only Spectrum control from 0% to 99% across blue, white and red 24-hour timer plus day, week and month calendar Programmable grow cycles including veg-to-bloom transitions, finishing modes and sunrise/sunset Save programs for specific crops Manual mode and view mode (natural white light, switchable to high-power reds and blues) Made in the U.S.A. 5-year California LightWorks warranty
$189.00
-
ThinkGrow ThinkGrow PA-1 240V to 120V Plug Adapter
The PA-1 is ThinkGrow's 220/240 V to 110/120 V plug adapter for US outlets. Use it to plug a ThinkGrow Model-H, Model-V, Model-W, Model-I or Model-I Plus light, or other suitably rated grow lights and electrical equipment, into a standard 120 V outlet. Adapts a 220/240 V plug to a 110/120 V US outlet For ThinkGrow Model-H, Model-V, Model-W, Model-I and Model-I Plus LEDs Also works with other appropriately rated grow lights and equipment
$13.65 $12.97
-
ThinkGrow ThinkGrow EC-12 12' Power Extension Cord for ThinkGrow LEDs
The EC-12 is a 12' power extension cord with push-lock connectors for ThinkGrow fixtures, for when the outlet sits farther away than the fixture's cord reaches. Length: 12' (3.66 m) Push-lock connectors For all ThinkGrow fixtures
$22.00 $20.95
-
ThinkGrow ThinkGrow UH-2 Unistrut Hanger for Model-I & Model-I Plus LEDs
The UH-2 hangs a ThinkGrow Model-I or Model-I Plus fixture straight from standard 1-5/8" metal framing channel (Unistrut), which is handy in rooms with low ceilings. It has a quick-release design for easy installs. Fits standard 1-5/8" (41.28 mm) Unistrut channel Quick-release design For ThinkGrow Model-I and Model-I Plus fixtures
$20.00 $19.15
-
ThinkGrow ThinkGrow UH-1 Unistrut Hanger for Model-H & Model-H Plus LEDs
The UH-1 hangs a ThinkGrow Model-H or Model-H Plus fixture straight from standard 1-5/8" metal framing channel (Unistrut), which is handy in rooms with low ceilings. It has a quick-release design for easy installs. Fits standard 1-5/8" (41.28 mm) Unistrut channel Quick-release design For ThinkGrow Model-H and Model-H Plus fixtures
$20.00 $19.15
-
ThinkGrow ThinkGrow DOA-10 3' 30A 10 AWG Hardwire Cord for OPA-2 Output
The DOA-10 lets non-ThinkGrow equipment such as pumps, fans, HVAC units or dehumidifiers run off the line-out side of a ThinkGrow OPA-2 Smart Junction Box, so a TrolMaster Hydro-X Pro (HCS-2) or Hydro-X Plus (HCS-3) can control it as a high-power device. Length: 3' (0.9 m) Gauge: 10 AWG (5.26 mm² copper) · resistance under 12 mΩ Rated up to 30 A · 100–277 V Connects to the OPA-2 line-out section (OPA-2 sold separately)
$59.00 $56.05
-
ThinkGrow ThinkGrow DPA-10 30A 10 AWG Hardwire Power Cord for Daisy-Chain Strings
The DPA-10 connects a string of ThinkGrow daisy-chain power cords straight to your power source when you're not using an OPA-2 smart junction box. One end is pre-stripped for hardwiring; the other has a waterproof connector that mates with ThinkGrow daisy-chain cables and fixtures. Gauge: 10 AWG (5.26 mm² copper) · resistance under 12 mΩ Rated up to 30 A · 100–277 V Pre-stripped end for connection to the power source Waterproof M25 3-pin connector with protective covers Rated to 105°C · meets RoHS standards
$59.00 $56.05
-
ThinkGrow ThinkGrow DCA-14 5' Daisy-Chain Power Cord, 15A 14 AWG
The DCA-14 is a 5' daisy-chain power cord in 14 AWG copper that links ThinkGrow LED fixtures one to the next, so a single feed powers a whole row instead of running a cord to an outlet for every light. How many fixtures one run can carry depends on your circuit. Length: 5' (1.5 m) Gauge: 14 AWG (2.08 mm² copper) · resistance under 21 mΩ Rated up to 15 A · 100–277 V For all ThinkGrow LEDs on the ThinkGrow daisy-chain power system Weight: 1.06 lb
$52.00 $49.40
-
ThinkGrow ThinkGrow OPA-2 Smart Junction Box for Daisy-Chained LEDs, 100–277V 30A
The OPA-2 is a smart junction box that powers a string of daisy-chained ThinkGrow LEDs and watches the circuit. It meters voltage, current, power and power factor, cuts power to the lights if current climbs past the limit you set, and connects to TrolMaster controllers for remote monitoring, light grouping and dimming. Rated 30 A · 100–277 V~, 50/60 Hz Selectable shut-off points: 15 A, 20 A or 30 A · overcurrent protection point +120%, responds within 0.5 s Real-time voltage, current, power and power-factor readings Light-group control (groups 0–9) and spectrum-group control for UV, white, deep red and far red with TrolMaster controllers Power surge protection · full power-off for the night cycle RS-485 communication · ETL / FCC Working temperature 32–104°F · humidity ≤ 90% In the box: OPA-2 junction box, ECS-7 12' daisy-chain control cable, 2 ECS-9 connector cables, 2 Y-splitters.
$230.00 $218.50
-
ThinkGrow ThinkGrow RC-1 Lifter Rigging Cable Kit for Smart Light Lifters
The RC-1 is a rigging cable kit for the ThinkGrow Smart Light Lifter system, for adding a hanging point or replacing a worn cable. It comes with two stainless steel eye plates for anchoring. Cable length: 47" Keep the two eye plates no more than 94" apart Made for ThinkGrow Smart Light Lifters In the box: lifter rigging cable, 2 stainless steel eye plates.
$48.30 $45.89
You have seen 24 out of 117 products