A unique, compact system that lets you quickly secure a variety of items, including reflectors, fans, and other gardening accessories. Adjust as needed—no knots or chain to mess with. 150 lbs. of holding power, with hook ends that pull tight to secure load.FeaturesAutomatically locks in place Includes auto feed rope dial 150 lb load limit 1/4" metal hooks 8' solid braided polypropylene rope (1/4" diameter) Clamshell packing
The MQ-500 quantum meter is the tool of choice for scientists all over the world to accurately measure photosynthetically active radiation from all light sources. It has a hand-held meter, attached via cable, that displays and stores measurements. The sensor incorporates a blue-enhanced silicon photodiode and custom optical filters with a rugged, self-cleaning sensor housing design, anodized aluminum body with acrylic diffuser. Typical applications include PPFD measurement over plant canopies in outdoor environments, greenhouses, and growth chambers, and reflected or under-canopy (transmitted) PPFD measurements in the same environments. Quantum sensors are also used to measure PAR/PPFD in aquatic environments, including salt water aquariums where corals are grown.The meter has a sample and log mode, and will record an integrated daily total in mol m-2 d-1. Sample mode will record up to 99 manual measurements. Log mode will power the meter on and off to make a measurement every 30 seconds. Every 30 minutes, the meter will average the sixty 30 second measurements and record the averaged value to memory. The meter can store up to 99 averages. Once full, it will start to overwrite the oldest measurement with new ones. An integrated daily total will be recorded from the 48 averaged measurements (making a 24 hr period). Sample and log measurements can be reviewed on the LCD display or by downloading the data to a computer, however, the integrated daily total can only be viewed by downloading the data to a computer with the special AC-100 communication cable (a standard USB cable will not work) and ApogeeAMS software.
The Quantum Dimmable Ballast brings quality, efficiency, and high intensity illumination to your garden. With a Power Factor of 99.9% a highly stable output frequency‚Äöthe Quantum Dimmable ballast lets you run your lamps at the strength you need allowing you to control your light spread. Rigorously engineered, it features a resin cased circuit board with a sealed bearing fan so it will run cooler than any other ballast and it's been tested to withstand the extreme atmospheric conditions of virtually any growing environment. The Quantum Dimmable Ballast is silent, generator-ready, efficient, and cool-running this is one cool ballast.Run at 100%, 75% or 50% power (400W runs at 100% and 75%)Strikes both metal halide and high pressure sodium bulbsAccepts 120V/240V with no wiring needed (both cords included); 208V-configurable with electrician assistanceAccepts 50 Hz to 60 Hz with no extra wiring neededRuns 15% cooler than other digital ballasts on the marketHas a continuous power factor of 99%The most stable output frequency of any ballastHigher lumen output than magnetic ballastsCan run efficiently on generators without flickeringResin sealed circuit board for high humidity installationsCan easily be used in conjunction with lighting controllers and flip boxesNOTE: The Quantum QT1000 ballast is designed to operate single-ended lamps only, and cannot run double-ended (DE) lamps. Not compatible with US5001671 and DX1000HPS lamps.
This accessory incorporates a mounting fixture at the end of a telescopic wand extendable to 33 inches (84 cm) allowing the user to place Apogee sensors in hard to reach areas. The platform features two mounting holes to accommodate both our narrow and wider diameter radiation sensors. This wand is not suited for wet environments. For freshwater and saltwater use, we recommend our other wand, the AM-320.
8' Ballast Power Cord 14/3 120VWe offer a full range of power supply cords as well as adapters to switch from Hydrofarm ballasts to other brands of reflectors, or from Hydrofarm reflectors to other brands of ballasts. We also offer extension cords for your convenience, but keep in mind that some high intensity light systems may not work at long lamp cord lengths due to ignitor range restrictions. If you have any questions, please consult your sales representative.
TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes several types of lighting adapters (LMA units) that allow the Hydro-x to control lights using their low-volt control option. This Lighting Control Adapter D (LMA-12) is specially designed for controlling D ballast.
We offer a complete line of PHOTOBIO•VP LED fixture cable harnesses. These "plug & play" harnesses provide the benefit of power connection and disconnection at the fixture level, reducing liability, electrical infrastructure costs, and labor costs.
For existing infrastructure: Harnesses are available with traditional plug heads.
Features:
Mini IP connectors allow safe "plug & play" power transmission and are dust and liquid resistant.
Offered in 120v, 240v, 277v and bare wire configurations
UV resistant power cable
We offer a complete line of PHOTOBIO•X LED fixture cable harnesses. These "plug & play" harnesses provide the benefit of power connection and disconnection at the fixture level, reducing liability, electrical infrastructure costs, and labor costs.
For new construction: Utilizing a harness with bare wire leads wired directly into a junction box eliminates the cost of a traditional plug and receptacle while reducing contractor labor expense.
For existing infrastructure: Harnesses are available with traditional plug heads.
Features:
IP connectors allow safe "plug & play" power transmission and are dust and liquid resistant.
The 10’ UV resistant power cable is white in color to maximize light reflectivity.
Custom cable harnesses are available by special order. Contact your sales representative for details.
8' Ballast Power Cord 16/3 120V We offer a full range of power supply cords as well as adapters to switch from Hydrofarm ballasts to other brands of reflectors, or from Hydrofarm reflectors to other brands of ballasts. We also offer extension cords for your convenience, but keep in mind that some high intensity light systems may not work at long lamp cord lengths due to ignitor range restrictions. If you have any questions, please consult your sales representative.
If you already own a 2' fluorescent fixture, make the most of it and other Jump Start garden gear with this 2' Jump Start stand (System sold separately).
Features
Ideal for seedlings, cuttings, flowers, and house plants
Simple toggle clamp for easy lamp height adjustment
Easy assembly
System size:
2' dimensions: 24"H x 18"W x 26"L
System box size:
2' dimensions: 7"H x 2"W x 30"L
The Light Riser Hanging System makes hanging reflectors, filters or other equipment a snap. Simply secure one of the quick release carabiner clips to a firm location, attach the other clip to the object you want to hang, and then pull the cord until the desired height is reached. It's as simple as that.Holds up to 150 lbs (75 lbs per ratchet)Quick release switches let you loosen the rope and re-adjust to the height requiredLocking system secures your object in placeDurable construction will never break, slip, or rustIncludes 4 quick release carabiner clips and 8 feet of tough braided polypropylene rope (1/8" diameter)
All new for 2020, the Advanced Quantum PAR Meter provides accurate and cost-effective measurement for all light sources used to grow plants. The PHOTOBIO by Phantom Quantum PAR meter is designed to measure PAR (Photosynthetically Active Radiation) flux in wavelengths ranging from 400 to 700nm. There is a proportional relationship between the number of photons absorbed in 400 to 700nm band and the rate of photosynthesis in plants, which is important for horticultural studies and monitoring plant physiology.The Advanced light meter comes complete with a remote sensor, two connection cables, the main unit and easy to replace AAA batteries. The PAR meter can store up to 99 measurements for easy reference. Portable PAR meter with highly accurate remote quantum sensorMeasures photosynthetically active radiation (PAR) from 400 to 700 nmSimple and easy to useRecord up to 99 readingsIncludes short coiled and long straight connection cables
Like all of our lights, the new LED was built on the principle of design, test & repeat. The LUXX 645 LED PRO has been developed by assessing SMD (Surface Mount Device) chips and drivers from leading manufacturers in controlled test applications and cultivation facilities for +3 years.The LUXX 645 LED PRO is made up of horticulture whites and Osram reds. The respective companies lead the field in LED R&D, delivering high efficiency, reliability & diode performance. The LUXX 645 LED PRO deploys a lens angle of 120 degrees, from a 6 bar design, with a total of 2,226 diodes.Comes with a 10ft 240v NEMA 6-15P (120v adapter included)
When germinating seeds, the fixture can be kept just inches away from the seeds (or humidity dome). After sprouting, keep the fixture 3-6" away from the plant canopy.The built-in timer allows you to easily set a 12 hours on/12 hours off schedule or an 18 hours on/6 hours off schedule with a single button press.Ideal for seedlings, cuttings, flowers and house plants Grow seedlings faster with 15-20% more lumens Simple toggle clamp for easy lamp height adjustment Super easy assembly Internal reflective finish directs more light to plants 24" interior widthINCLUDES:T5 high output grow light fixture and bulb ( 6400K full-spectrum) 2' Jump Start Light Stand 6' grounded cord with on/off switchDimensions:JSV2T: 24.5"H x 18.25"W x 26"LJSV4T: 31.75"H x 18.25"W x 50"LSystem box size:2' dimensions: 7" H x 2" L x 30" W4' dimensions: 7" H x 2" L x 53" W
Get connected! This extension cord extends your reach freeing you up from inconvenient outlets placed around your grow room or work room. The strong, sturdy cord is made to stand up to all kinds of environments, ensuring that your power keeps running when you need it most.Features14 gauge cord with grounded 120V plug for maximum safetyHeavy-duty molded outlet for longer life12 ft15 amp3 outletIndoor use only1800 maximum wattsUL-listed
The Master Green 1000 watt HPS electronic ballast features high frequency 105 kHz micro processing technology optimized for operating double-ended 1000 watt HPS lamps. The Master Green can operate at 60%, 70%, 100%, or Super Charge. Extruded aluminum housing is lightweight and its compact design has active cooling (internal fan) and soft start technology, which promotes longer lamp life. Our Master Green electronic ballast lamp cord receptacle is designed specifically for Sun System brand reflectors. The ballast operates at 120-240 volt power. Includes a 6.5 ft Convertible Smart Volt dual ferrite, power cord and both 120 volt and 240 volts interchangeable plugs.
Completely sealed featuring hinged glass and double gasket (between glass and reflector and glass and frame) for an air-tight seal. Includes tempered glass, built-in socket and 15 ft lamp cord. Highly reflective aluminum interior for excellent reflectivity and diffusion. Swing Stop retention cable keeps glass from abruptly swinging down. Captured thumb screws and closure mechanism for ease of use and excellent sealing. Air-cooling flanges have a bead ring to keep ducting securely in place. Powder-coated galvanized steel housing.
Hydrofarm's Light Riser Hanging System makes it easy to hang LED's, light reflectors, carbon filters or other equipment. New improved design with a simple push button release. Simply secure one of the quick release carabiner clips to a firm location, attach the other clip to the object you want to hang, and then pull the cord until the desired height is reached. It's as simple as that.Contains 1/pair of rope ratchetsHolds up to 150 lbs (75 lbs per ratchet)Quick release switches let you loosen the rope and re-adjust to the height requiredLocking system secures your object in placeDurable construction will never break, slip, or rustIncludes 4 quick release carabiner clips and 8 feet of 1/8" diameter tough braided polypropylene rope
Hydrofarm's Light Riser Hanging System makes it easy to hang reflectors, filters or other equipment. Simply secure the quick release carabiner clips to a firm location, attach the other clip to the object you want to hang, and then pull the cord until the desired height is reached. It's as simple as that.Holds up to 150 lbsQuick release switch lets you loosen the rope and re-adjust to the height requiredLocking system secures your object in placeDurable construction will never break, slip, or rustIncludes carabiner clips and 8 feet of tough braided polypropylene rope (1/4" diameter)
The Quantum Dimmable Ballast brings quality, efficiency, and high intensity illumination to your garden. With a Power Factor of 99.9% a highly stable output frequency‚Äöthe Quantum Dimmable ballast lets you run your lamps at the strength you need allowing you to control your light spread. Rigorously engineered, it features a resin cased circuit board with a sealed bearing fan so it will run cooler than any other ballast and it's been tested to withstand the extreme atmospheric conditions of virtually any growing environment. The Quantum Dimmable Ballast is silent, generator-ready, efficient, and cool-running this is one cool ballast.Run at 100%, 75% or 50% power (400W runs at 100% and 75%)Strikes both metal halide and high pressure sodium bulbsAccepts 120V/240V with no wiring needed (both cords included); 208V-configurable with electrician assistanceAccepts 50 Hz to 60 Hz with no extra wiring neededRuns 15% cooler than other digital ballasts on the marketHas a continuous power factor of 99%The most stable output frequency of any ballastHigher lumen output than magnetic ballastsCan run efficiently on generators without flickeringResin sealed circuit board for high humidity installationsCan easily be used in conjunction with lighting controllers and flip boxesNOTE: The Quantum QT1000 ballast is designed to operate single-ended lamps only, and cannot run double-ended (DE) lamps. Not compatible with US5001671 and DX1000HPS lamps.
