The new EZ-Clone Lo Pro 128 Black overall height has been reduced by four inches, while increasing the structural integrity of the new proprietary Lid and Reservoir. Manufactured from durable UV protected HDPE plastic. The Lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings and comes with four way finger slots for improved Cloning Collar extraction. The Reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leak-proof design, and improved interface when opening the system to view cuttings. The water pump has an extended baseplate and additional suction cups to prevent tipping. It also includes four different colored cloning collars.
EZ-CLONE Clear Rez is a pH-balanced, non-invasive water treatment designed to keep all of the internal workings of your cloning system crystal clear and operating at peak performance. It is designed to be used through out your entire cloning cycle as a possible preventive measure for a multitude of problems in your reservoir. It is suitable for all hydroponic, aeroponic and soil applications. EZ-CLONE Clear Rez is currently available in 2 oz, 4 oz, 8 oz, 16 oz, 32 oz and one gallon container sizes to fit any grower's needs.
Mat design allows placing propagation trays end to end (instead of side by side) on this mat. A 4 ft fluorescent light fixture will be perfect to provide supplemental lighting over this size area. These mats are 20% larger than competitive mats. This allows warming of two complete propagation trays to their edges. Helps gardeners have better success rates with seedlings and cuttings. Daisy chain your mats for ease of use. You can connect up to 10 mats together. Warms rooting area approximately 10-20F over ambient temperature to improve germination process. Heavy-duty construction makes this mat very durable. Ed Hume Seal of Approval. Dimensions: 12 in x 48 in. 5 ft 120 V power cord. One mat uses 60 W.
Domed germination kit designed to improve seed starting and cloning inside a high humidity space.
Clear, heavy duty 3mm thick dome with glossy finish allows light penetration and provides precise humidity control.
LED grow light bars utilize Samsung LM301H EVO diodes for powerful lighting with unmatched efficiency.
Lightweight 6x12 seedling tray can support up to 72 seedlings and is built to drain excess water.
Drip tray with optional height extension panels ensures no water leakage while supporting heavier loads.
Product Description
A domed germination kit designed to promote successful plant growth and propagation by producing a high-humidity environment. The transparent dome allows for optimal light saturation while offering easy observation of your plants’ progress. Adjustable vents on the dome offer complete humidity control through smooth and effortless rotation. Make further adjustments with the optional height extender, which can be applied to elevate the dome for cloning projects. The drip and seedling trays fit seamlessly to support up to 72 seedlings while catching excess water and preventing leaks in the process.
Grow Light Bars
Includes two full spectrum LED lighting bars that provide luminosity to help strengthen your seedlings’ stems and ensure their long-term health. Each LED grow light bar is built with genuine Samsung LM301H EVO diodes, the latest in horticulture lighting technology that emits intense brightness at greater efficiency. This performance is superior to leading Samsung LM301H and LM301B LEDs, as well as Bridgelux 3030, and other previous-generation LEDs. EVO diodes help improve plant growth by emitting greater light quality and more light output per diode, with a higher blue spectrum and greater efficiency when compared to non-EVO diodes. The dome is specially shaped to fit these strip lights to provide a platform to eliminate the need to purchase and mount external lighting. Features a timer controller with four dimming levels and timer settings that repeat daily to further maximize seedling growth.
Applications
This humidity dome serves as the ideal well-regulated environment for growing seedlings and cloning a wide variety of plants including spices and aromatics. Its compact and durable design can easily fit on balconies, window ledges, in your grow tent, or in any room in your home. Quickly and easily transport the domed seedling tray as needed thanks to its practical size. With relocatable light bars that can be intensified and used as supplemental lighting, they can also be set in grow tents to help create a controlled, resource-efficient environment throughout your plant's grow cycle. Pair this with the SUNCORE Series of seedling heat mats to further improve germination success.
20” x 20.75” heating mat to accelerate and improve the success of seed starting and germination.
Digital heat controller displays real-time mat temperature, which can be adjusted to exact levels.
Eliminates the guesswork of determining heat levels to germinate any seed with no risk of scorching.
Features innovative far-infrared film that warms faster and evenly distributes heat across the mat.
Crafted with IP-67 quad-layer PVC that is flexible, resistant to wear and tear, and easy to wipe clean.
Product Description
A warming seedling mat designed to improve germination success and accelerate your seeds’ growth process by emitting precision heating. The seedling mat’s steady 32-122°F (0-50°C) temperature range heats the rooting area by up to 20°F above the ambient air temperature. It uses a durable quad-layer PVC that is resistant to wear and tear and is easy to clean and roll for storage. Achieving an IP-67 rating, the heating mat is sealed along its seams to keep water and dust from seeping in. This ingress protection is extended to the power cord, its connection specially sealed to prevent electrical damage from occurring.
Innovative Technology
Each mat for seedling growth is lined with an innovative far-infrared film that provides even heating distribution while producing softer warmth output than wire coils, protecting your seeds from scorching. Its connected digital controller supports this protection by allowing you to set your exact desired temperature. The controller conveniently displays the mat’s current temperature, making it easy to program your preferred heating level and view the change in real time. Modify your seedling mat’s temperature as needed without guesswork, which can otherwise cause seeds to rot due to extreme changes.
Applications
Best used for seed germination and propagation, this seedling mat is primarily set indoors (e.g., in basements and terrariums) to jumpstart the rooting stage. For best results, you may use a greenhouse dome over your seeds to provide humidity and supplement their sprouting. The seedling mat can also be used for home brewing and fermenting beverages, as well as heating pet enclosures for reptiles.
10” x 20.75” heating mat to accelerate and improve the success of seed starting and germination.
Digital heat controller displays real-time mat temperature, which can be adjusted to exact levels.
Eliminates the guesswork of determining heat levels to germinate any seed with no risk of scorching.
Features innovative far-infrared film that warms faster and evenly distributes heat across the mat.
Crafted with IP-67 quad-layer PVC that is flexible, resistant to wear and tear, and easy to wipe clean.
Product Description
A warming seedling mat designed to improve germination success and accelerate your seeds’ growth process by emitting precision heating. The seedling mat’s steady 32-122°F (0-50°C) temperature range heats the rooting area by up to 20°F above the ambient air temperature. It uses a durable quad-layer PVC that is resistant to wear and tear and is easy to clean and roll for storage. Achieving an IP-67 rating, the heating mat is sealed along its seams to keep water and dust from seeping in. This ingress protection is extended to the power cord, its connection specially sealed to prevent electrical damage from occurring.
Innovative Technology
Each mat for seedling growth is lined with an innovative far-infrared film that provides even heating distribution while producing softer warmth output than wire coils, protecting your seeds from scorching. Its connected digital controller supports this protection by allowing you to set your exact desired temperature. The controller conveniently displays the mat’s current temperature, making it easy to program your preferred heating level and view the change in real time. Modify your seedling mat’s temperature as needed without guesswork, which can otherwise cause seeds to rot due to extreme changes.
Applications
Best used for seed germination and propagation, this seedling mat is primarily set indoors (e.g., in basements and terrariums) to jumpstart the rooting stage. For best results, you may use a greenhouse dome over your seeds to provide humidity and supplement their sprouting. The seedling mat can also be used for home brewing and fermenting beverages, as well as heating pet enclosures for reptiles.
Domed germination kit designed to improve seed starting and cloning inside a high humidity space.
Clear, heavy-duty 3mm thick dome with glossy finish allows light penetration and provides precise humidity control.
LED grow light bars utilize Samsung LM301H EVO diodes for powerful lighting with unmatched efficiency.
Dome includes optional height extension panels with adjustable vents for propagation projects.
Drip and plant trays crafted for durability to support up to 40 seedlings while draining excess water.
Product Description
A domed germination kit designed to promote successful plant growth and propagation by producing a high-humidity environment. Included within the kit are the humidity dome and grow light bars. The transparent dome allows for optimal light saturation while offering easy observation of your plants’ progress. Adjustable vents on the dome offer complete humidity control through smooth and effortless rotation. Make further adjustments with the optional height extender, which can be applied to elevate the dome for cloning projects. The drip and seedling trays fit seamlessly to support up to 40 seedlings while catching excess water and preventing leaks in the process.
Grow Light Bars
Includes two full spectrum LED lighting bars that provide luminosity to help strengthen your seedlings’ stems and ensure their long-term health. Each LED grow light bar is built with genuine Samsung LM301H EVO diodes, the latest in horticulture lighting technology that emits intense brightness at greater efficiency. This performance is superior to leading Samsung LM301H and LM301B LEDs, as well as Bridgelux 3030, and other previous-generation LEDs. EVO diodes help improve plant growth by emitting greater light quality and more light output per diode, with a higher blue spectrum and greater efficiency when compared to non-EVO diodes. The dome is specially shaped to fit these strip lights to provide a platform to eliminate the need to purchase and mount external lighting. Features a timer controller with four dimming levels and timer settings that repeat daily to further maximize seedling growth.
Applications
This humidity dome serves as the ideal well-regulated environment for growing seedlings and cloning a wide variety of plants including spices and aromatics. Its compact and durable design can easily fit on balconies, window ledges, in your grow tent, or in any room in your home. Quickly and easily transport the domed seedling tray as needed thanks to its practical size. With relocatable light bars that can be intensified and used as supplemental lighting, they can also be set in grow tents to help create a controlled, resource-efficient environment throughout your plant's grow cycle. Pair this kit with the SUNCORE Series of seedling heat mats to further improve germination success.
Dual heating mats designed to accelerate and improve the success of seed starting and germination.
Features an innovative far-infrared film that warms up faster, and distributes soft heat more evenly.
Adjustable dial controls heat output over time, without turning the mat on/off which disrupts growth.
Crafted with IP-67 quad-layer PVC that’s flexible, resistant to wear-and-tear, and easy to wipe clean.
Verifiable UL (E518635) & MET (E115128) certifications for electrical safety thru online directories.
Product Description
Dual seedling mats designed to improve germination success and accelerate your seeds’ growth process by emitting steady heat. The seedling mat’s steady 80-87°F (27-31°C) temperature range heats the rooting area by up to 20°F above the ambient air temperature. It uses a durable quad-layer PVC that is resistant to wear-and-tear and is easy to clean and roll for storage. Best used for seed germination and propagation in indoor settings like basements and terrariums to jumpstart the rooting stage. Also fit for homebrewing or fermenting beverages, and heating pet enclosures for reptiles.
Innovative Technology
Each mat for seedling growth is lined with an innovative far-infrared film that provides even heating distribution while producing softer warmth output than wire coils, protecting your seeds from scorching. Its connected heating controller supports this protection, featuring an adjustable dial that sets your desired heat output. Control the mat temperature over time without having to turn it on and off, which can cause the seed to rot due to extreme changes in temperature. Threshold levels include off, low, medium, and high.
Safety Certified
This heating mat is UL-certified (E518635), achieving safety standards for electric heating appliances and electrically heated warming pads. It also meets MET standards (certificate #E115128) for electrical appliance safety, ensuring harm-free use in indoor heating applications. These certifications are verifiable through their respective online directories under AC Infinity Inc. The heating mat is additionally rated for fire resistance and safe temperature regulation. Achieving an IP-67 rating, the heating mat is sealed along its seams to keep water and dust from seeping in. This ingress protection is extended to the 60-inch power cord, its connection specially sealed to prevent electrical damage from occurring.
Treat your plants with care that comes directly from another leafy source. Dyna-Gro's Pure Neem Oil is cold-pressed from the seeds of the Neem tree. This organic leaf polish can be used on any plant to produce clean, shiny leaves. Pure Neem Oil leaves a natural shine on leaves without clogging the stomata.
EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber.
This is the add-on unit for the MTMDU Commercial Heat Mat. You can daisy-chain up to 4 of these units to the MTMDU unit to maximize your seed starting area.Bottom heat is one of the most important and effective ways to improve germination and rooting. Our new HEAVY DUTY modular commercial heat mats will provide uniform heat for hundreds of seedlings or cuttings. Warms root area 10-20¬∞F over ambient temperature to improve germination.Supersized mats: 60" x 21" Rugged and durable with waterproof connectors Daisy-chain up to 5 units (4 of these add-on units plus the the Commercial Mat MTMDU) Plugs into an MTMDU heat mat and/or another MTMDA mat. The mat at the start of the chain must be an MTMDU, which plugs into our Digital Heat Mat Thermostat (MTPRTC) (required, sold separately)
The Super Sprouter Seedling Heat Mat Digital Thermostat is easy to use. Simply plug the heat mat into the thermostat and place the temperature probe in the desired location. The temperature control range is 68-108F (20-42C). Temperature is easily viewed through the back-lit digital display, allowing you to accurately set ideal germinating or rooting temperatures. Maximum current rating is 8.3 Amps/1000 W. 6 ft power cord and probe with a suction cup.
EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber. Currently, EZ-CLONE Cloning Collars are available in a new high density Hard material as well as the same great Soft material that we have been using for years.
Athena VPDome is the most efficient way to clone. The easy-to-install fabric rack cover can hold 16 standard clone trays without the need for individual domes.
Simple operation streamlines nursery workflow (2-4 hours labor savings per month per rack).
Uniform and consistent VPD reduces mortality and speeds rooting.
Durable construction reduces costly plastic dome replacements.
Anti-microbial coating reduces disease vectors.
USAGE INSTRUCTIONS
VPDome fits perfectly over a standard wire rack (48” W x 72” H x 18” D)
Install bottom rack cover
Place cover over top of rack
Close door with magnetic seals
SHIPPING & AVAILABILITY
VPDome is available for shipping worldwide starting January 2023.
Jump Start Heat Mats are engineered for performance and durability. The strong heating wire and thick multi-layer construction offer uniform heating and the ability to withstand rugged greenhouse environments.Features:Increases success of seedlings and cuttingsWarms root area 10-20F over ambient temperature to improve germinationLight, watering, and planting information on matWaterproof construction6 foot power cordUL-listed50% thicker construction compared to other brands
EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber. Currently, EZ-CLONE Cloning Collars are available in a new high density Hard material as well as the same great Soft material that we have been using for years.
EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber. Currently, EZ-CLONE Cloning Collars are available in a new high density Hard material as well as the same great Soft material that we have been using for years.
EZ-CLONE Clear Rez is a pH-balanced, non-invasive water treatment designed to keep all of the internal workings of your cloning system crystal clear and operating at peak performance. It is designed to be used through out your entire cloning cycle as a possible preventive measure for a multitude of problems in your reservoir. It is suitable for all hydroponic, aeroponic and soil applications. EZ-CLONE Clear Rez is currently available in 2 oz, 4 oz, 8 oz, 16 oz, 32 oz and one gallon container sizes to fit any grower's needs.
EZ-CLONE Clear Rez is a pH-balanced, non-invasive water treatment designed to keep all of the internal workings of your cloning system crystal clear and operating at peak performance. It is designed to be used through out your entire cloning cycle as a possible preventive measure for a multitude of problems in your reservoir. It is suitable for all hydroponic, aeroponic and soil applications. EZ-CLONE Clear Rez is currently available in 2 oz, 4 oz, 8 oz, 16 oz, 32 oz and one gallon container sizes to fit any grower's needs.
The new EZ-Clone 64 Lo Pro Black has been made from fully recyclable HDPE which is highly chemically resistant and extremely durable. Now has leak resistant cord outlet that allows multiple cords. Also has a specially designed recessed drain that allows for high protection and easy draining. These are just some of the 75 plus improvements designed specifically to make cloning even easier.
EZ-Clone is proud to announce the introduction of the brand new 32 Site Low Pro System. The overall height has been reduced, while increasing the structural integrity of the new proprietary lid and reservoir. It is manufactured from durable UV protected HDPE plastic. The lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings and comes with four way finger slots for improved cloning collar extraction. The reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design. These smaller systems utilize the same great Aeroponic Misting Technology as all of our larger systems. It's perfect for cloning a variety of plants in small areas.
oxyCLONE 20 is a simple, compact, recirculating cloning system. It works with a variety of cuttings, allowing you to have a perpetual garden year-round. Now powered by Active Aqua's premium, BPA-free water and air pumps! The submersible pump delivers constant turbulence to your reservoir while the attached Venturi valve naturally draws in air bubbles. For maximum aeration, the single-outlet Active Aqua air pump provides a constant flow of dissolved oxygen through a circular 4" air diffuser. No other cloner delivers dissolved oxygen like the oxyCLONE! For tips and FAQs, please visit www.oxyclone.com.Features:Maximum oxygenationWon't leak or clogEvaporative cooling means less retained heatPowered with the Active Aqua AAPA3.2L single outlet air pump and Active Aqua AAPW160 submersible water pump!
Our heat mat thermostat is digital for greater accuracy.FeaturesWater-resistant stainless steel temperature probeDigital temperature controlProvides constant optimum temperatures for specific cropsControls temperature in colder or warmer environmentsLED mode indicator lights; 3-prong grounded plugCompatible with all Hydrofarm heat matsControllable range from 68 to 108 degrees FahrenheitCelsius or Fahrenheit read-out (press Up or Down button to change)Max current: 8.3 amps/1000 wattsError Codes:E1: temperature is too low, has exceeded the range limit; or the temperature probe open (break).E2: temperature is too high, has exceeded the upper limit of the range.E3: Short-circuit for temperature sensor (probe)
