Made of galvanized steel, these dampers prevent air leakage into your fan setup. They are easy to install, fit directly onto the ducting, and prevent a backdraft of air when the fans are switched off. (OBSOLETE)
Made of galvanized steel, these dampers prevent air leakage into your fan setup. They are easy to install, fit directly onto the ducting, and prevent a backdraft of air when the fans are switched off. (OBSOLETE)
Active Air Premium Ducting is made of tough 3-ply aluminum foil laminate. It is designed for air-cooling and can be used in different forms of heating and ventilation applications. This product is made to resist puncture and tears. One continuous and corrosion resistant helix wire is placed in the duct wall for structural support. Active Air Premium Ducting is perfect for the air-cooled reflectors in your grow room.Includes (2) EZ Turn duct clampsAir Pressure: Max 25 mm WG (2500 Pa or 10" WG)Air Velocity: Max 25 mm/sec (4900 ft/min)
Active Air Premium Ducting is made of tough 3-ply aluminum foil laminate. It is designed for air-cooling and can be used in different forms of heating and ventilation applications. This product is made to resist puncture and tears. One continuous and corrosion resistant helix wire is placed in the duct wall for structural support. Active Air Premium Ducting is perfect for the air-cooled reflectors in your grow room.Includes (2) EZ Turn duct clampsAir Pressure: Max 25 mm WG (2500 Pa or 10" WG)Air Velocity: Max 25 mm/sec (4900 ft/min)
Active Air Premium Ducting is made of tough 3-ply aluminum foil laminate. It is designed for air-cooling and can be used in different forms of heating and ventilation applications. This product is made to resist puncture and tears. One continuous and corrosion resistant helix wire is placed in the duct wall for structural support. Active Air Premium Ducting is perfect for the air-cooled reflectors in your grow room.Includes (2) EZ Turn duct clampsAir Pressure: Max 25 mm WG (2500 Pa or 10" WG)Air Velocity: Max 25 mm/sec (4900 ft/min)
Each Original Can-Filter uses the most conceptually sound, granular carbon, packed-bed design to deliver the best performing carbon filter on the market. Even with the industry thickest carbon bed, at 2.5 in, the Can Original provides for some of the lowest pressure drops, even on smaller size filters. This hefty granular carbon bed effectively makes the Original filter the biggest sponge for VOC removal capable of holding massive amounts of contaminant leading to a lifespan that leaves other filters, frankly, in the dust. The Original Can-Filter are designed for the control of VOCs (paint fumes, hydrocarbons, ect...), odors and other gaseous contaminants. Built with the same proven packed bed design and granular virgin activated carbon we've used for 30 years, this line of time tested activated carbon air filters sets the standard for long life, consistent performance and low presure drop. Rated at a conservative 0.1 sec contact time, the Original Can-Filter provide excellent value and confidence.
The flange is used to connect the Can-Filter to the ducting or Can-Fan this is for airflow out of the ventilated area. These spun steel flanges come with a foam rubber seal and 6 hex drive self-tapping screws forming a perfect seal with Can-Filter products. Flanges range in size from 4 in to 20 in depending on your specific needs.
No screwdriver needed! These stainless steel clamps work well on irrigation hoses and small ducting by preventing water and air leaks. These clamps are also a great option for underwater use as they will never rust or corrode.
No screwdriver needed! These stainless steel clamps work well on irrigation hoses and small ducting by preventing water and air leaks. These clamps are also a great option for underwater use as they will never rust or corrode.
The flange is used to connect the Can-Filter to the ducting or Can-Fan this is for airflow out of the ventilated area. These spun steel flanges come with a foam rubber seal and 6 hex drive self-tapping screws forming a perfect seal with Can-Filter products. Flanges range in size from 4 in to 20 in depending on your specific needs.
Made from strong galvanized steel construction, these Y connectors allow you to split ventilation into multiple areas with one fan. Using a Y-connector gives you double the possibilities you can split a length of ducting into two separate runs of ducting going to your preferred areas. Available in a wide range of sizes to fit your situation.
Made of galvanized steel. Crimped on both ends for easy installation, these couplers provide the perfect solution when you need to join two runs of ducting to make a single, longer run. Use duct clamps (we recommend our Active Air stainless steel clamps, such as item code ACC10) or zip ties to secure the ducting to the coupler. (OBSOLETE)
No screwdriver needed! These stainless steel clamps work well on irrigation hoses and small ducting by preventing water and air leaks. These clamps are also a great option for underwater use as they will never rust or corrode.
Reduce the noise of your inline fan and exiting duct air by using the best muffler/silencer on the market. Proven to reduce more noise than any other muffler available. This unique glass pack silencer will not erode like competitor foam products. For additional sound dampening, we recommend using a Phat Muffler on both the intake and exit of your inline fan.
• 85% Noise Reduction Coefficient (NRC)—best on the market
• Lightweight aluminum construction—easy to hang, no rust
• 45-degree inner taper before flanges helps reduce more noise
• Phat Glass pack won't disintegrate like foam products
• 4" to 12" sizes available—regular length & super Phat mini sizes
• Maximum free flow air movement
Reduce the noise of your inline fan and exiting duct air by using the best muffler/silencer on the market. Proven to reduce more noise than any other muffler available. This unique glass pack silencer will not erode like competitor foam products. For additional sound dampening, we recommend using a Phat Muffler on both the intake and exit of your inline fan.
• 85% Noise Reduction Coefficient (NRC)—best on the market
• Lightweight aluminum construction—easy to hang, no rust
• 45-degree inner taper before flanges helps reduce more noise
• Phat Glass pack won't disintegrate like foam products
• 4" to 12" sizes available—regular length & super Phat mini sizes
• Maximum free flow air movement
