Fluence

This genuine Fluence dimming signal cable connects a Fluence fixture's power supply to your dimmer or lighting controller. One end has a 3-pin M12 threaded connector that screws onto the power supply's M12 dimming port; the other end is a pigtail of bare wires for the 0-10 V terminals on a Fluence dimmer or another controller.The 5-foot length lets you mount the dimmer or controller farther from the power supply than the short 11-inch cable allows. It fits Fluence fixtures with an M12 dimming port, including M12 models in the SPYDR 2 series, SPYDR 3, SPYDR e, VYPR 3, VYPR 4 and PYTHN; power supplies with the older plastic M16 push-lock dimming port need an M16-to-M12 dimming adapter. Length: 5 ft (1.52 m) Fixture end: M12 threaded (screw-on), 3-pin Controller end: pigtail (bare wires) Signal: 0-10 V dimming, 1 channel Fits: Fluence power supplies with an M12 dimming port Warranty: 1-year limited (Fluence) Fluence part number: 912401701622 (CCA-XXU3T2FL3X1.5)

Read more less

This genuine Fluence AC extension cable is for hardwiring a Fluence LED fixture. One end has Fluence's 3-pin M19 push-lock connector, which plugs into the fixture's power supply and clicks into place; the other end is a pigtail of bare wires, so a qualified electrician can connect it directly, such as in a junction box.Fluence rates it for up to 480 V AC. It fits Fluence fixtures whose power supply takes an M19 push-lock AC cable, including the SPYDR 3, SPYDR 2x, 2p, 2i and SPYDR FANG, SPYDR e, and VYPR 2x, 2p, 3x, 3p and DUO 3x2. Length: 6 ft (1.83 m) Power end: pigtail (bare wires, no plug) for direct wiring Fixture end: M19 push-lock, 3-pin Rating: 480 V AC max Not for: SPYDRx, SPYDRx PLUS, RAZRx or RAY series fixtures Warranty: 1-year limited (Fluence) Fluence part number: 912401701624 (CAA-XXU3P9FL3X1.8)

Read more less

This genuine Fluence AC extension cable powers a Fluence LED fixture from a standard 120-volt wall outlet. It has a NEMA 5-15P plug on one end and Fluence's 3-pin M19 push-lock connector on the other, which plugs into the fixture's power supply and clicks into place.It's made for Fluence fixtures whose power supply takes an M19 push-lock AC cable, such as the SPYDR 2x, 2p, 2i and SPYDR FANG, SPYDR e, and VYPR 2x, 2p, 3x, 3p and DUO 3x2. To unplug it, twist the locking ring about a quarter turn counter-clockwise and pull straight out. Length: 6 ft (1.83 m) Plug: NEMA 5-15P (standard 120 V outlet) Fixture end: M19 push-lock, 3-pin Rating: 125 V AC max Not for: SPYDRx, SPYDRx PLUS, RAZRx or RAY series fixtures Warranty: 1-year limited (Fluence) Fluence part number: 912401701611 (CAA-XXU3P9FN5P1.8)

Read more less

This Fluence Wireless Flex Dimming receiver lets you dim a fixture without running dimming cables. It plugs straight into the plastic M16 push-lock dimming port on a Fluence power supply and takes its dimming signal over a Bluetooth mesh network from a Wireless Flex 0-10V adapter, which can be driven by a SHYFT Light Scheduler (with the SHYFT adapter) or any lighting controller with a standard 0-10 V output and a 12-24 V DC supply.Use one receiver per power supply. This M16 version is for power supplies with the push-lock M16 port used on SPYDR 2 and VYPR 2 fixtures before Fluence moved to M12; fixtures with a threaded M12 port need the M12 receiver instead. It's rated IP66 for indoor or outdoor use, and Fluence specifies it for approved Fluence power supplies only. Fits: Fluence power supplies with a plastic M16 push-lock, 3-pin dimming port Wireless: Bluetooth mesh (SILVAIR), 2.4 GHz; 50 ft line of sight, up to 8 hops Output: 0-10 V DC (0-100% dimming), powered by the fixture's power supply (12 V DC) Capacity: up to 300 receivers per Wireless Flex 0-10V adapter Rating: IP66, indoor/outdoor; 14-140 °F operating Size and weight: 3.79 in long x 0.87 in diameter; 1.1 oz (31 g) Certifications: CE, FCC, IC, Bluetooth Warranty: 5-year limited (Fluence) Fluence part number: 912401701778 (WF1DG-RC13P6FBTX)

Read more less

This genuine Fluence AC extension cable connects a Fluence LED fixture to a circuit with NEMA L7-15P locking receptacles, with extra length to reach a distant receptacle. It has a locking L7-15P plug on one end and Fluence's 3-pin M19 push-lock connector on the other, which plugs into the fixture's power supply and clicks into place.It's made for Fluence fixtures whose power supply takes an M19 push-lock AC cable, such as the SPYDR 2x, 2p, 2i and SPYDR FANG, SPYDR e, and VYPR 2x, 2p, 3x, 3p and DUO 3x2. To unplug it from the fixture, twist the locking ring about a quarter turn counter-clockwise and pull straight out. Length: 15 ft (4.57 m) Plug: NEMA L7-15P (locking) Fixture end: M19 push-lock, 3-pin Rating: 277 V AC max Not for: SPYDRx, SPYDRx PLUS, RAZRx or RAY series fixtures Warranty: 1-year limited (Fluence) Fluence part number: 912401701626 (CAA-XXU3P9FL7P4.6)

Read more less

This Fluence jumper cable links PYTHN under-canopy LED fixtures that aren't plugged directly into each other. PYTHN fixtures normally join end to end with their built-in connectors; use the jumper to connect rows of fixtures so they can share one power cable, or for runs installed perpendicular to the bench.It's 39 inches (1 m) long, with M25 5-pin connectors, the same connector type as the PYTHN AC power cable. Length: 39 in (3 ft 3 in / 1 m) Connectors: M25 5-pin Use: connects rows of PYTHN fixtures, or fixtures installed perpendicular to the bench Not needed: between fixtures joined directly end to end Fits: Fluence PYTHN fixtures Fluence part number: 912401707179 (PT-JC-M25-5p-1m-S)

Read more less

This Fluence power cable brings power to a run of PYTHN under-canopy LED fixtures. Its M25 5-pin connector plugs into the first fixture in the run, and Fluence requires a PYTHN power cable at the start of each run.The other end is a pigtail with three bare wires and no plug, made for hardwiring by a qualified electrician into a junction box or power source. A plug for a 120 V or 240 V receptacle is not included. Length: 57 in (4 ft 9 in / 1.5 m) Fixture end: M25 5-pin connector Power end: pigtail, 3 wires, no plug Wire colors: brown = line, blue = neutral (or second line on line-to-line circuits), green/yellow = ground Cable: 3-conductor, 1.5 mm² Fits: Fluence PYTHN fixtures Fluence part number: 912401707166 (PT-CAC-M25-5-1.5-S)

Read more less

This genuine Fluence AC extension cable powers a Fluence LED fixture from a standard 120-volt wall outlet, with extra length to reach a distant receptacle. It has a NEMA 5-15P plug on one end and Fluence's 3-pin M19 push-lock connector on the other, which plugs into the fixture's power supply and clicks into place.It's made for Fluence fixtures whose power supply takes an M19 push-lock AC cable, such as the SPYDR 2x, 2p, 2i and SPYDR FANG, SPYDR e, and VYPR 2x, 2p, 3x, 3p and DUO 3x2. To unplug it, twist the locking ring about a quarter turn counter-clockwise and pull straight out. Length: 15 ft (4.57 m) Plug: NEMA 5-15P (standard 120 V outlet) Fixture end: M19 push-lock, 3-pin Rating: 125 V AC max Not for: SPYDRx, SPYDRx PLUS, RAZRx or RAY series fixtures Warranty: 1-year limited (Fluence) Fluence part number: 912401701612 (CAA-XXU3P9FN5P4.6)

Read more less

This genuine Fluence dimming signal cable connects a Fluence fixture's power supply to your dimmer or lighting controller. One end has a 3-pin M12 threaded connector that screws onto the power supply's M12 dimming port; the other end is a pigtail of bare wires for the 0-10 V terminals on a Fluence dimmer or another controller.Fluence includes an 11-inch dimming cable with its SPYDR 2i retail kits, so this makes a handy spare or replacement. It fits Fluence fixtures with an M12 dimming port, including M12 models in the SPYDR 2 series, SPYDR 3, SPYDR e, VYPR 3, VYPR 4 and PYTHN; power supplies with the older plastic M16 push-lock dimming port need an M16-to-M12 dimming adapter. Length: 11 in (28 cm) Fixture end: M12 threaded (screw-on), 3-pin Controller end: pigtail (bare wires) Signal: 0-10 V dimming, 1 channel Fits: Fluence power supplies with an M12 dimming port Warranty: 1-year limited (Fluence) Fluence part number: 912401701621 (CCA-XXU3T2FL3X0.3)

Read more less

This short Fluence adapter lets M12 dimming cables connect to Fluence power supplies that have the older plastic M16 push-lock dimming port. The M16 push-lock end plugs onto the power supply's dimming port, and the threaded M12 end accepts Fluence M12 dimming cables, such as a dimming signal cable or a DIM Flex T-cable drop.Fluence specifies this adapter for its PSU1 and PSE2 power supplies with an M16 push-lock dimming port. It's part of Fluence's DIM Flex M12 wiring system, which Fluence rates as suitable for wet locations. Length: 6 in (152 mm) Power-supply end: M16 push-lock, female, 3-pin Cable end: M12 threaded (screw lock), male, 3-pin For: Fluence PSU1 and PSE2 power supplies with an M16 push-lock dimming port Warranty: 1-year limited (Fluence) Fluence part number: 912401701728 (ACA-XXU3P6FT2M0.1)

Read more less

This genuine Fluence AC extension cable is for hardwiring a Fluence LED fixture where the power source is farther away. One end has Fluence's 3-pin M19 push-lock connector, which plugs into the fixture's power supply and clicks into place; the other end is a pigtail of bare wires, so a qualified electrician can connect it directly, such as in a junction box.Fluence rates it for up to 480 V AC. It fits Fluence fixtures whose power supply takes an M19 push-lock AC cable, including the SPYDR 3, SPYDR 2x, 2p, 2i and SPYDR FANG, SPYDR e, and VYPR 2x, 2p, 3x, 3p and DUO 3x2. Length: 15 ft (4.57 m) Power end: pigtail (bare wires, no plug) for direct wiring Fixture end: M19 push-lock, 3-pin Rating: 480 V AC max Not for: SPYDRx, SPYDRx PLUS, RAZRx or RAY series fixtures Warranty: 1-year limited (Fluence) Fluence part number: 912401701610 (CAA-XXU3P9FL3X4.6)

Read more less

This genuine Fluence AC extension cable connects a Fluence LED fixture to a circuit with NEMA L7-15P locking receptacles. It has a locking L7-15P plug on one end and Fluence's 3-pin M19 push-lock connector on the other, which plugs into the fixture's power supply and clicks into place.It's made for Fluence fixtures whose power supply takes an M19 push-lock AC cable, such as the SPYDR 2x, 2p, 2i and SPYDR FANG, SPYDR e, and VYPR 2x, 2p, 3x, 3p and DUO 3x2. To unplug it from the fixture, twist the locking ring about a quarter turn counter-clockwise and pull straight out. Length: 6 ft (1.83 m) Plug: NEMA L7-15P (locking) Fixture end: M19 push-lock, 3-pin Rating: 277 V AC max Not for: SPYDRx, SPYDRx PLUS, RAZRx or RAY series fixtures Warranty: 1-year limited (Fluence) Fluence part number: 912401701625 (CAA-XXU3P9FL7P1.8)

Read more less

 Fluence AC Extension Cords and Cables are specifically engineered for indoor greenhouse and vertical farming environments, offering reliable performance in damp and wet locations. These cords meet the rigorous UL 1581 VW-1 flame test standards, ensuring safety in demanding conditions. With push-lock and threaded connectors, installation is plug-and-play, minimizing errors and simplifying maintenance. Designed for secure, long lasting connections, these cords are built to support your farming setup with confidence, backed by a 5-year limited warranty. Product Code: 9124 016 88457 Legacy Product Code: CACA-70751-05 Specifications Cable/Cord Length: 15ft Connection: NEMA 6-15P Plug to M19 Push-Lock Connector Compatibility: VYPR 3, RAZRm, SPYDR 2 Max Voltage: 250V AC Max Current: 7A

Read more less

 The Fluence DC PSU2 Dimming Adapter is your trusted solution for connecting a Fluence dimmer to a single fixture in the VYPR 3 and RAZRm Systems. This adapter streamlines the process, making it simple and secure to manage your lighting system. Whether you're working in a greenhouse, indoor garden, or any horticultural setting, this adapter ensures your lighting operates smoothly and efficiently. Product Code: CDMA-71683-10 Specifications Cable/Cord Length: 6in Connection: M12 Threaded Connector Power Supply to M16 Push-Lock Connector Dimming Cable Compatibility: VYPR 3, RAZRm

Read more less

Fluence’s SPYDR FANG is a high-performance top-lighting solution for the craft cannabis grower or home hobbyist. Enabling growers to command their grow with an efficiency optimized output (PPF), PhysioSpec™ R4 indoor spectrum, and included 0-100% dimmer for easy control and full-cycle cultivation. Light Output: PPF 1600 µmol/s  Efficacy: 2.6 µmol/J @ 240 V AC  AC Input Power: 626 W @ 240 V AC  AC Input Voltage: 120-277 V AC, 50/60 Hz  Light Distribution: 120° Mounting Height Above Canopy 6” - 12” [15-30 cm]  Thermal Management: Passive Dimming: Dimmer Module Included Lifetime (Driver and LED Q90): >36,000 hrs  IP Rating per IEC60598-1: IP66  Certifications: UL 8800, UL 1598, CE, IEC60598-1  Warranty: 3 Year Limited Warranty AC Cord, 6', NEMA 6-15P 240V included

Read more less

The Fluence SPYDR 2i is a passively cooled LED top light with Fluence's PhysioSpec Broad R4 spectrum. This unit comes without an AC power cord. Fluence's AC cords connect to the fixture's power supply with an M19 3-pin push-lock connector, so you need a matching cord (sold separately) for your outlet or circuit.Specifications (47" SPYDR 2i) PPF: 1,700 µmol/s; efficacy: 2.7 µmol/J at 277 V Input power: 638 W at 277 V Input voltage: 120-277 V AC, 50/60 Hz Dimming: 0-10V, 10-100% and off Size: 42.8 x 47 in Rated life: more than 50,000 hours IP66; UL 8800, UL 1598 Wet Location; DLC Good to know Mount it 6-12" above the canopy. Fluence lists a maximum ambient of 95°F (35°C) at 90% RH. The fixture ships pre-configured with its DC cable and power supply. Fluence covers it with a 5-year limited warranty.

Read more less

The Fluence Dimmer is a reliable, user-friendly dimmer that controls the light intensity from 0-100% of Fluence light fixtures. This device allows growers to control the light intensity of their Fluence light fixtures via an easy-to-use up/down arrow function, and clearly shows the user their light output intensity percentage via a digital display. This dimmer is meant to control the overall light intensity and maintain a set point of your Fluence LED light fixtures. It is not a relay or digital schedule timer to control photoperiod. Please contact Fluence to find out more about available photoperiod schedule control solutions.

Read more less

The Fluence SPYDR 2r LED Grow Light is an advanced lighting solution designed specifically for craft herb cultivators. It offers a powerful 1600 µmol/s PPF output, ideal for micro-growers aiming to optimize their harvest. Equipped with the PhysioSpec™ Broad R4 spectrum, the SPYDR 2r ensures balanced, full-cycle cultivation, while the included 0-100% dimmer provides precise control over light intensity throughout the growth stages. This high performance grow light is tailored for those seeking to command their indoor growing environment with efficiency and ease. AC Cord and DC Extension Cable sold separately. Product Code: 9124 017 02470 Product SpecificationsLight Source: LEDSpectrum: PhysioSpec™ Broad R4Light Output: PPF 1600 µmol/sEfficacy: 2.6 µmol/J @ 240 V ACAC Input Power: 626 W @ 240 V ACAC Input Voltage: 120-277 V AC, 50/60 HzLight Distribution: 120°Mounting Height Above Canopy: 6in - 12inThermal Management: PassiveMax. Ambient Temperature/Humidity: 95°F, 90% RHDimming: M12 Connectors, 0-10v Signal, Dim to offTotal Harmonic Distortion (THD): <10% at 100% outputLifetime (Driver and LED Q90): > 36,000 hrs.IP Rating IEC60598-1: IP66Certifications: UL 8800, UL 1598, CE, IEC60598-1Warranty: 5 Year WarrantyDLC Reported Application: Indoor (Stacked and Non-stacked)Position/Use Case: Top light/Sole-sourceDimensions: 47in x 43in x 1.26in (Unit), 14.56in x 5.26in x 2.62in (Power Supply)Weight: 16.7lb (Light Bar), 8.1lb (Power Supply)

Read more less

Fluence AC Extension Cords and Cables are specifically engineered for indoor greenhouse and vertical farming environments, offering reliable performance in damp and wet locations. These cords meet the rigorous UL 1581 VW-1 flame test standards, ensuring safety in demanding conditions. With push-lock and threaded connectors, installation is plug-and-play, minimizing errors and simplifying maintenance. Designed for secure, long lasting connections, these cords are built to support your farming setup with confidence, backed by a 5-year limited warranty. Product Code: 9124 016 88456 Legacy Product Code: CACA-70750-10 Product SpecificationsCable/Cord Length: 6ftConnection: NEMA 6-15P Plug to M19 Push-Lock ConnectorCompatibility: VYPR 3, RAZRm, SPYDR 2Max Voltage: 250V ACMax Current: 7A

Read more less