TrolMaster
-
TrolMaster TrolMaster ECS-6 16ft 4-Pin Waterproof Extension Cable
The TrolMaster ECS-6 is a 16 ft waterproof 4-pin extension cable with a male and a female end. Use it to add distance between a WCS-1/2 water content sensor module and its probe, or to reach ThinkGrow LED fixtures and Smart Light Lifters. 16 ft, 4-pin, waterproof Male to female ends For WCS-1/2 water content sensors, ThinkGrow LED fixtures and Smart Light Lifters Plug and play Working environment: 32–122°F, up to 90% RH In the box: one ECS-6 16 ft extension cable.
$24.00 $22.80
-
TrolMaster TrolMaster ECS-5 RJ12 to PushLock Waterproof Connector Cable Set
The TrolMaster ECS-5 connects newer Fluence LED fixtures that use PushLock waterproof control connectors to your Hydro-X. The 4 ft converter cable ends in the 5/8" PushLock connector those fixtures take, and the kit includes the RJ12 cable and splitter to run the chain back to the controller. For newer Fluence LED fixtures with PushLock waterproof connectors 4 ft RJ12 to PushLock converter cable with 5/8" connector Includes 16 ft RJ12 cable and T-splitter Plug and play In the box: 16 ft RJ12 cable, 4 ft RJ12 to PushLock waterproof converter cable, T-shaped splitter.
$26.00 $24.70
-
TrolMaster TrolMaster ECS-3 RJ12 to Threaded Waterproof Connector Cable Set
The TrolMaster ECS-3 connects Fluence LED fixtures that use threaded waterproof control connectors to your Hydro-X. The 4 ft converter cable ends in the 5/8" threaded connector those fixtures take, and the kit includes the RJ12 cable and splitter to run the chain back to the controller. For Fluence LED fixtures with threaded waterproof connectors 4 ft RJ12 to 3-pin IP67 converter cable with 5/8" connector Includes 16 ft RJ12 cable and T-splitter Plug and play In the box: 16 ft RJ12 cable, 4 ft RJ12 to 3-pin IP67 converter cable, T-shaped splitter.
$24.00 $22.80
-
TrolMaster TrolMaster ECS-2 RJ12 to Pigtail LED Driver Connection Cable Set
The TrolMaster ECS-2 connects your Hydro-X lighting control to LED drivers that use pigtail wiring. Land the driver's two dimming wires on the terminal block, then daisy-chain each controlled light back to the Hydro-X LMA lighting adapter. Connects the Hydro-X to most LED drivers with pigtail dimming wires Daisy-chain each light back to the LMA lighting adapter Includes 16 ft RJ12 cable, 4 ft RJ12-to-female-barrel cable and T-splitter Plug and play In the box: 16 ft RJ12 cable, 4 ft RJ12 to female barrel cable, T-shaped splitter.
$24.00 $22.80
-
TrolMaster TrolMaster OA6-110 Aqua-X 110V Control Board, 6 Outlets
The TrolMaster OA6-110 gives an Aqua-X six separately controlled 120-volt outlets for small pumps and solenoid valves drawing under 1.5 amps. Each outlet has its own LED so you can see at a glance what's running, and up to five boards can connect to a single Aqua-X. 6 individually controlled 120 VAC outlets, 1.5 A max each For small 110 V pumps and solenoid valves LED indicator on each outlet plus power LED Addressing button; double RJ12 sockets for easy daisy-chaining Up to 5 boards per Aqua-X Input: 120 VAC, 9 A max · Working environment: 32–122°F, up to 90% RH In the box: OA6-110 control board, 16 ft RJ12 cable.
$115.00 $109.25
-
TrolMaster TrolMaster OAT-24 12-Output 24V Control Board for Aqua-X Pro and Plus
The TrolMaster OAT-24 adds 12 individually controlled 24-volt outputs to an Aqua-X Pro (NFS-2) or Aqua-X Plus (NFS-3), one per irrigation solenoid. Each valve can run in its own mode, so you can schedule multiple nutrients, rooms and zones from one controller, and stacking boards takes the Aqua-X Pro up to 600 individually controlled 24 V valves. 12 individually scheduled 24 VAC outputs, 0.5 A each Five control modes per solenoid: Recycle, Schedule, Demand, Volume and Auto-fill For Aqua-X Pro (NFS-2) and Aqua-X Plus (NFS-3) Multiple boards support up to 600 individually controlled 24 V valves Input: 100–240 V, 50/60 Hz; 1.7 A max Working environment: 32–104°F, up to 90% RH In the box: OAT-24 board, 16 ft RJ12 cable, power cable, 13-pin Phoenix-type connector.
$275.00 $261.25
-
TrolMaster TrolMaster VFD-1 Variable Frequency Drive Station for Hydro-X Pro
The TrolMaster VFD-1 connects a Hydro-X Pro to a variable frequency drive so the controller can set the speed of large industrial fans. It works with inverters such as the TECO E510, Delta ME300 and ABB ACS355 (with FMBA-01 module), needs no separate power supply, and hooks up with a standard RJ12 cable. Fan speed control for industrial fans through a VFD (inverter) Works with TECO E510, Delta ME300 and ABB ACS355 (FMBA-01 module required), among others For the Hydro-X Pro (HCS-2) controller No extra power needed; RJ12 connection LCD display; micro-SD slot for firmware updates Input: 12 V, 0.1 A max · IP20 · Working environment: 32–122°F, up to 90% RH In the box: VFD-1 station, 16 ft and 4 ft RJ12 cables, T-splitter.
$135.00 $128.25
-
TrolMaster TrolMaster OM-8 8-Output Dry Contact Board for Hydro-X Pro and Aqua-X Pro
The TrolMaster OM-8 lets a Hydro-X Pro or Aqua-X Pro switch up to eight individual outputs through dry contacts. Mount it in your electrical control cabinet, feed it 100–240 VAC, and use its 12 A relays to run pumps, solenoids or other equipment. 8 relay outputs, 12 A each (@250 VAC / 30 VDC) Overload protection on each output Force any contact open or closed for 30 minutes LCD display for setup Mounts inside an electrical control cabinet Input: 100–240 VAC, 50/60 Hz · IP20 Working environment: 32–104°F, up to 90% RH In the box: OM-8 dry contact board, 16 ft RJ12 cable.
$330.00 $313.50
-
TrolMaster TrolMaster EFC-1 EC Fan Control Adapter for Tent-X
The TrolMaster EFC-1 lets your Tent-X control the speed of an EC fan. It puts out either a 0–10 V or a PWM signal (pick the mode with a button), and each Tent-X takes one for the exhaust fan line and one for the intake line. Variable speed control for EC fans from the Tent-X (TCS-1) Selectable 0–10 V or PWM output (PWM 50 mA) One adapter per fan line: exhaust (F1) and intake (F2) LCD display for mode and addressing; plug and play Input: 12 V, 0.1 A max Working environment: 32–122°F, up to 90% RH In the box: EFC-1 adapter, RJ12 to female barrel cable.
$65.00 $61.75
-
TrolMaster TrolMaster 4RS-2 Tent-X Device Station Kit, 4 Outlets
The TrolMaster 4RS-2 gives a Tent-X four controlled outlets in one box. It connects to the controller with an RJ12 cable and uses four of the Tent-X's device slots, set by default (left to right) to one temperature, one humidity and two timer outputs. The power cord plugs straight into the wall. 4 controlled outlets for the Tent-X (TCS-1) Default outputs: 1 temperature (DST), 1 humidity (DSH), 2 timer (DSP) Up to 15 A per output; 15 A total Input: 100–240 VAC, 50/60 Hz Uses 4 device modules on the controller Quick install: one RJ12 connection and one power cord In the box: 4RS-2 device station kit, 16 ft RJ12 cable.
$221.00 $209.95
-
TrolMaster TrolMaster DCC-2 Dual System Control Adapter
The TrolMaster DCC-2 lets two controllers share one device. For example, an exhaust fan the Hydro-X runs for climate control can also be assigned to the Carbon-X for emergency CO2 exhaust. It connects to a plug-in device station through its built-in RJ12 cable and controls whatever is plugged into that station. Connects up to two controllers to one device station For Hydro-X and Carbon-X systems Compatible modules: DSC-1, DSH-1/2, DST-1/2, DSP-1, DSD-1, DSV-1 Built-in RJ12 cable; plug and play Input: 12 VAC, 0.2 A max Working environment: 32–122°F, up to 90% RH In the box: one DCC-2 adapter.
$116.00 $110.20
-
TrolMaster TrolMaster DCC-1 Dual Condition Adapter for Device Stations
The TrolMaster DCC-1 lets one device answer to two conditions. Connect it to a device station and you can run an exhaust fan when either the temperature or the humidity gets too high, or only when it's night and CO2 is over its setpoint. Interlock off (parallel): either condition turns the device on Interlock on (series): both conditions must be met Works with one plug-in module at a time: DSC-1, DSH-1/2, DST-1/2, DSP-1/2, DSV-1, DSD-1 or DSR-1 Connects to the module through its built-in RJ12 cable LED indicator; plug and play Input: 12 VAC, 0.2 A max · Working environment: 32–122°F, up to 90% RH In the box: one DCC-1 adapter.
$82.00 $77.90
-
TrolMaster TrolMaster DSR-1 25A Relay Device Station, 100-277V
The TrolMaster DSR-1 is a heavy-duty 25-amp relay module for big loads. Assign it as a temperature, humidity, CO2 or timer station, run it on anything from 100 to 277 V, and its overload protection looks after the equipment you connect. 25 A high-current relay output Input/output: 100–277 V, 50/60 Hz Assign as a temperature (DST), humidity (DSH), CO2 (DSC) or timer (DSP) station Overload protection Works with Hydro-X, Aqua-X, Tent-X, Carbon-X and Green-X systems Working environment: 32–104°F, up to 90% RH In the box: DSR-1 relay station, 0.5 ft and 4 ft RJ12 cables.
$121.00 $114.95
-
TrolMaster TrolMaster DSP-2 240V Program (Timer) Device Station
The TrolMaster DSP-2 is a program (timer) module that turns your controller into a multi-function timer for whatever is plugged into it: pumps, fans, lights or other gear. It handles 100–240 VAC devices up to 10 amps and links to the controller with a button press. Timer/program device station, listed for Hydro-X, Aqua-X, Tent-X and Green-X Input/output: 100–240 VAC, 50/60 Hz; up to 10 A LED status for addressing, connection, on/off and overload; button for manual override RJ12 cable socket; plug and play Global plug types; check TrolMaster's DS module plug list for your outlet type Working environment: 32–122°F, up to 90% RH In the box: DSP-2 device station, 16 ft and 4 ft RJ12 cables, RJ12 T-splitter.
$97.00 $92.15
-
TrolMaster TrolMaster DST-2 240V Temperature Device Station
The TrolMaster DST-2 connects a 240 V heater or cooling device to your Hydro-X so it switches on your temperature setpoints. Plug the device into the module, link it to the controller with one button press, and the status LED tells you what it's doing at a glance. Temperature device station for 240 VAC, 50/60 Hz heating or cooling devices Output: up to 10 A LED status for linked, on/off and overload; press and hold the button for manual on/off RJ12 cable socket; addressing; plug and play Global plug types; check TrolMaster's DS module plug list for your outlet type Working environment: 32–122°F, up to 90% RH In the box: DST-2 device station, 16 ft and 4 ft RJ12 cables, RJ12 T-splitter.
$97.00 $92.15
-
TrolMaster TrolMaster ARS-2 AC Remote Station for Mini-Splits, Auto/Cool/Heat
The TrolMaster ARS-2 is the upgraded AC remote station for mini-splits and compatible window units. It learns your AC's IR remote and controls Auto, Cool and Heat mode temperatures (the ARS-1 handles one mode), with separate day and night setpoints and an optional off period so the unit can idle without anyone touching it. It's powered through its RJ12 cable, so there's nothing extra to plug in. Learns and controls Auto, Cool and Heat mode temperatures Separate day and night setpoints based on photocell and temperature sensor status Set a period for the mini-split to stay off Works with Hydro-X (HCS-1, HCS-2, HCS-3), Tent-X (TCS-1) and Green-X (GCS-1) Powered by the RJ12 cable; back-panel mounting; micro-SD slot for firmware updates Input: 12 VDC, 0.1 A max · IP20 · Working environment: 32–122°F, up to 90% RH In the box: ARS-2 station, 16 ft and 4 ft RJ12 cables, T-splitter.
$135.00 $128.25
-
TrolMaster TrolMaster ARS-1 AC Remote Station for Mini-Split Air Conditioners
The TrolMaster ARS-1 gives a mini-split something it normally can't do: separate day and night temperature setpoints. It learns the IR codes from your AC's original remote, then sends the right setpoint to the indoor unit, switching from day to night on its own with a photocell. It works with most mini-splits and some window units that came with an IR remote. Universal IR remote station for mini-split and some window AC units Learns your AC's original remote codes Automatic day/night setpoint switching by photocell Not compatible with every AC brand; check TrolMaster's compatibility notes before ordering LCD display, address assignment, micro-SD firmware updates; plug and play Output: 0–11.5 V, 0.2 A max · Working environment: 32–122°F, up to 90% RH In the box: ARS-1 station, IR signal emitter, 16 ft and 4 ft RJ12 cables, RJ12 T-splitter.
$116.00 $110.20
-
TrolMaster TrolMaster TS-3 Reheat Control Station for Hydro-X Pro/Plus
The TrolMaster TS-3 runs reheat on air conditioners that support it: cooling and heating at the same time, so the system pulls moisture out of the room without dropping the temperature further. That lets your existing refrigeration circuit double as a dehumidifier. It's built for the Hydro-X Pro (HCS-2) and Hydro-X Plus (HCS-3). Reheat control for temperature plus supplemental dehumidification For HCS-2 Hydro-X Pro and HCS-3 Hydro-X Plus controllers Works with single-stage HVAC systems and heat pumps that can take heat and cool signals at the same time Mini-split and VRF systems are normally not compatible; running reheat on equipment that can't heat and cool together may damage it LCD display, address assignment, micro-SD firmware updates; plug and play Output: 24 V, 1 A max Working environment: 32–122°F, up to 90% RH In the box: TS-3 station, 16 ft and 4 ft RJ12 cables, RJ12 T-splitter.
$209.00 $198.55
-
TrolMaster TrolMaster TS-1 Thermostat Station for Cool-Only HVAC
The TrolMaster TS-1 takes the place of the thermostat on a conventional cool-only commercial AC unit so your Hydro-X runs it. It wires in with the same low-voltage thermostat cable and standard color-coded terminals, and the Hydro-X gives it separate day and night setpoints. One Hydro-X can run up to four TS stations, so several AC units can work off one controller. For conventional cool-only HVAC and commercial AC units Uses standard low-voltage thermostat wiring Separate day and night settings; up to 4 TS stations per Hydro-X LCD display, address assignment, plug and play Micro-SD slot for firmware updates (32 GB or smaller card) Output: 24 V, 1 A max Working environment: 32–122°F, up to 90% RH In the box: TS-1 thermostat station, 16 ft and 4 ft RJ12 cables, RJ12 T-splitter.
$119.00 $113.05
-
TrolMaster TrolMaster LMA-T Lighting Control Adapter T for ThinkGrow LEDs
The TrolMaster LMA-T connects ThinkGrow LED systems to a Hydro-X controller. It plugs into the Line 1 and Line 2 lighting ports and gives you two channels, one for the full-spectrum diodes and one for the supplemental red, each with its own on/off times and dimming. The LEDs daisy-chain back to the controller with plug-and-play RJ lighting cables. Designed for ThinkGrow LED systems Two channels: full spectrum and second red, each with on/off times and dimming Connects to the Hydro-X Line 1 and Line 2 lighting ports Runs up to 256 ThinkGrow LEDs per adapter LED indicator; plug and play Input: 12 V, 0.1 A max Working environment: 32–122°F, up to 90% RH In the box: LMA-T adapter, ECS-9 RJ12-to-waterproof connector cable.
$95.55 $90.77
-
TrolMaster TrolMaster LMA-14G Group Control Lighting Adapter, 0-10V
The TrolMaster LMA-14G connects 0–10 V light drivers to a Hydro-X Pro or Hydro-X Plus and assigns them to schedule groups, so different lights in the same room, like your inner-canopy and under-canopy LEDs, can run on their own programs. Each adapter handles up to 40 HID lights or 24 LEDs. For HCS-2 Hydro-X Pro and HCS-3 Hydro-X Plus controllers Up to 40 HID lights or 24 LEDs per adapter Lights assignable to groups 0–9 Two lines (Line 1 and Line 2) with independent settings Pigtail wiring to the LED driver's terminal block LCD display for group addressing; plug and play Input: 12 V · Output: 0–10 V, 0.05 A max Working environment: 32–122°F, up to 90% RH In the box: one LMA-14G group control adapter.
$100.00 $95.00
-
TrolMaster TrolMaster LMA-9 0-10V to Digital Lighting Adapter for ThinkGrow LEDs
The TrolMaster LMA-9 lets a third-party controller with 0–10 VDC dimming outputs run ThinkGrow LEDs. It takes two separate 0–10 V channels, so the supplemental red diodes can be dimmed independently of the full-spectrum diodes, and converts them to the digital signal ThinkGrow fixtures use. Two 0–10 V input channels: full spectrum and supplemental red Twin cables with 2 + 2 hardwired terminals for the controller Single RJ12 port connects to the string of ThinkGrow LEDs LED indicator; plug and play Input: 0–10 V, 60 mA Working environment: 32–122°F, up to 90% RH In the box: LMA-9 adapter, ECS-9 12 ft RJ12 to 4-pin IP65 cable, power and signal connection cables.
$90.00 $85.50
-
TrolMaster TrolMaster LMA-G Group Control Lighting Adapter for ThinkGrow Model-I
The TrolMaster LMA-G adds group control to ThinkGrow Model-I and Model-I Plus LED systems. Paired with the LMA-T lighting adapter on a Hydro-X Pro, it lets you run separate groups of lights on their own settings. Each LMA-G handles one group, so add one per group you want to split out. For ThinkGrow Model-I and Model-I Plus LED fixtures Works with the Hydro-X Pro and the LMA-T lighting adapter One light group per adapter; group and spectrum settings 0–9 LCD display for group addressing RJ12 connection; plug and play Input: 12 V, 0.1 A max Working environment: 32–122°F, up to 90% RH In the box: LMA-G group control adapter, ECS-9 12 ft RJ12 to 4-pin cable.
$95.55 $90.77
-
TrolMaster TrolMaster LMA-24 Lantern Schedule Lighting Adapter, 0-10V
The TrolMaster LMA-24 uses two Hydro-X lighting channels to run a lantern schedule on fixtures with 0–10 V control. The lantern cycle is a 24-hour vegetative schedule: 12 hours on, 5.5 hours off, 1 hour on, then 5.5 hours off. TrolMaster says the short light break in the middle of the dark period keeps plants in a high-growth vegetative state. Runs a lantern (night-break) lighting schedule from your Hydro-X Uses two Hydro-X lighting channels For HID and LED fixtures with 0–10 V control Converts the Hydro-X digital signal to a 0–10 V analog output Connects with an RJ12 cable; plug and play; LED power indicator Input: 12 V · Output: 0–10 V, 0.05 A max Working environment: 32–122°F, up to 90% RH In the box: one LMA-24 lantern schedule adapter.
$100.00 $95.00
You have seen 72 out of 119 products