TrolMaster

119 products

  • Sale -5% TrolMaster LMA-15 lighting control adapter DLI TrolMaster LMA-15 adapter for DLI ballasts

    TrolMaster TrolMaster LMA-15 Lighting Control Adapter DLI for DLI Ballasts

    In stock

    The TrolMaster LMA-15 lets a Hydro-X controller run DLI ballasts. It translates the Hydro-X digital signal into the analog low-volt control DLI ballasts use, so on/off schedules and dimming come from the same controller that runs the rest of the room. Designed for DLI ballasts Converts the Hydro-X digital signal to analog low-volt control Connects to the Hydro-X with an RJ12 cable; plug and play LED power indicator Input: 12 V, 0.2 A max Working environment: 32–122°F, up to 90% RH In the box: one LMA-15 lighting control adapter.

    In stock

    $64.00 $60.80

  • Sale -5% TrolMaster LMA-13 lighting control adapter S TrolMaster LMA-13 adapter for Sun System ballasts

    TrolMaster TrolMaster LMA-13 Lighting Control Adapter S for Sun System Ballasts

    In stock

    The TrolMaster LMA-13 lets a Hydro-X controller run Sun System ballasts. It translates the Hydro-X digital signal into the analog low-volt control those ballasts use, so on/off schedules and dimming come from the same controller that runs the rest of the room. It fits every Sun System ballast except the SunSystem LEC 630. For Sun System ballasts (not the SunSystem LEC 630) Converts the Hydro-X digital signal to analog low-volt control Connects to the Hydro-X with an RJ12 cable; plug and play LED power indicator Input: 12 V, 0.2 A max Working environment: 32–122°F, up to 90% RH In the box: one LMA-13 lighting control adapter.

    In stock

    $64.00 $60.80

  • Sale -5% TrolMaster LMA-11 lighting control adapter P TrolMaster LMA-11 adapter for Phantom ballasts

    TrolMaster TrolMaster LMA-11 Lighting Control Adapter P for Phantom Ballasts

    In stock

    The TrolMaster LMA-11 lets a Hydro-X controller run your Phantom lights. It translates the Hydro-X digital signal into the analog low-volt control that Phantom LP ballasts and the Phantom 60 Series use, so on/off schedules and dimming come from the same controller that runs the rest of the room. For Phantom LP ballasts and Phantom 60 Series Converts the Hydro-X digital signal to analog low-volt control Connects to the Hydro-X with an RJ12 cable; plug and play LED power indicator Input: 12 V, 0.2 A max Working environment: 32–122°F, up to 90% RH In the box: one LMA-11 lighting control adapter.

    In stock

    $64.00 $60.80

  • Sale -5% TrolMaster DFM-3 1.5-inch digital flow meter TrolMaster DFM-3 inline flow meter LCD

    TrolMaster TrolMaster DFM-3 1.5-Inch Digital Flow Meter for Aqua-X Pro

    In stock

    The TrolMaster DFM-3 is a 1.5" inline digital flow meter for high-volume feed lines. Its LCD shows flow speed and total volume, and with the Aqua-X Pro it runs feed-by-volume irrigation so each zone gets a measured amount of solution. It connects straight to the Aqua-X Pro or through an SPH-1 splitter hub. Rated flow: 1.32–39.62 GPM (5–150 L/min) 1.5" connections with pre-installed BSP-to-NPT adapter Pressure rating: up to 250 psi (1.75 MPa) 1" LCD shows flow speed and total flow volume Feed-by-volume irrigation with the Aqua-X Pro controller RJ12 output with 16 ft cable Working environment: 32–122°F, up to 90% RH In the box: 1.5" digital inline flow meter with BSP-to-NPT adapters.

    In stock

    $121.00 $114.95

  • Sale -5% TrolMaster DFM-2 1.25-inch digital flow meter TrolMaster DFM-2 inline flow meter LCD

    TrolMaster TrolMaster DFM-2 1.25-Inch Digital Flow Meter for Aqua-X Pro

    In stock

    The TrolMaster DFM-2 is a 1.25" inline digital flow meter for bigger feed lines. Paired with the Aqua-X Pro, it lets you schedule irrigation by volume so each zone gets a measured amount of water or nutrient solution, and its LCD shows flow right at the meter. Rated flow: 0.26–31.70 GPM (1–120 L/min) 1.25" NPT connections (BSP-to-NPT adapters pre-installed) Pressure rating: up to 250 psi (1.75 MPa) 1" LCD for on-site flow readings Feed-by-volume irrigation with the Aqua-X Pro controller 16 ft cable Working environment: 32–122°F, up to 90% RH In the box: 1.25" digital inline flow meter with pre-installed BSP-to-NPT adapters.

    In stock

    $116.00 $110.20

  • Sale -5% TrolMaster DFM-1 1-inch digital flow meter TrolMaster DFM-1 flow meter LCD

    TrolMaster TrolMaster DFM-1 1-Inch Digital Flow Meter for Aqua-X Pro

    In stock

    The TrolMaster DFM-1 is a 1" inline digital flow meter that measures the water or nutrient solution moving through your feed line. Paired with the Aqua-X Pro, it lets you schedule irrigation by volume so each zone gets a precise amount of solution, and its LCD shows flow right at the meter. Rated flow: 0.53–15.85 GPM (2–60 L/min) 1" NPT connections (BSP-to-NPT adapters pre-installed) Pressure rating: up to 250 psi (1.75 MPa) 1" LCD for on-site flow readings Feed-by-volume irrigation with the Aqua-X Pro controller Powered through the SPH-1 splitter hub Working environment: 32–122°F, up to 90% RH In the box: 1" digital inline flow meter with pre-installed BSP-to-NPT adapters and 16 ft cable.

    In stock

    $109.00 $103.55

  • Sale -5% TrolMaster WN-9 substrate sensor node TrolMaster WN-9 stainless sensing spikes

    TrolMaster TrolMaster WN-9 Substrate Sensor Node, VWC, EC and Temperature

    In stock

    The TrolMaster WN-9 is the add-on probe for the WCS-9 substrate sensor system. Stainless steel spikes read volumetric water content and EC, and a built-in sensor tracks root-zone temperature, in soil or high-EC soilless media. Daisy-chain up to four nodes to one WCS-9 display for an averaged reading that isn't thrown off by one hot spot or water channel. Measures VWC (0–100%), EC (0–30 mS/cm) and root-zone temperature Stainless steel sensing spikes Up to 4 nodes per WCS-9 sensor display (display sold separately) Reads every minute, or every 10 seconds in Feed on Demand mode Includes a 12 ft ECS-7 daisy-chain cable Working environment: 32–122°F, up to 90% RH In the box: WN-9 sensor node, ECS-7 12 ft daisy-chain cable.

    In stock

    $125.00 $118.75

  • Sale -5% TrolMaster WCS-9 substrate sensor set TrolMaster WCS-9 sensor display

    TrolMaster TrolMaster WCS-9 Substrate Sensor Set, VWC, EC and Temperature

    In stock

    The TrolMaster WCS-9 is a 3-in-1 substrate sensor set built around a multi-node design. One sensor display takes up to four daisy-chained WN-9 nodes and averages their volumetric water content, EC and temperature across the root zone, so a single dry spot or water channel doesn't skew your irrigation decisions. It works in traditional soil and high-EC soilless media. Measures VWC (0–100%), EC (0–30 mS/cm) and root-zone temperature Up to 4 WN-9 sensor nodes per display, averaged for a representative reading Reads every minute, or every 10 seconds in Feed on Demand mode Works with Aqua-X (NFS-1/2/3), Hydro-X Pro (HCS-2), Tent-X (TCS-1) and Green-X (GCS-1) Up to 50 displays on an Aqua-X Pro or Hydro-X Pro, 20 on an Aqua-X Plus, 1 on Aqua-X, Tent-X or Green-X Simplified calibration and free app access Power: 12 V, 0.1 A · Working environment: 32–122°F, up to 90% RH In the box: WCS-9 sensor display, one WN-9 sensor node, 16 ft RJ12 cable set, T-splitter.

    In stock

    $209.00 $198.55

  • Sale -5% TrolMaster AMP-3 sensor board TrolMaster AMP-3 sensor board LCD

    TrolMaster TrolMaster AMP-3 Sensor Board for pH, EC and Temperature Probes

    In stock

    The TrolMaster AMP-3 is the bridge between your pH and EC/temperature probes and the controller. It connects to the Aqua-X Pro, Aqua-X Plus, Tent-X or Green-X with a standard RJ12 cable and shows pH, EC and water temperature on its own LCD as well as on the main controller. Add more boards to monitor several reservoirs. Inputs: 2 pH (BNC), 1 EC/temperature (mini-DIN); RJ12 system connection Works with TrolMaster PPH-1/2/3 pH and PCT-1/2/3 EC/temp probes (sold separately) 1" LCD for on-site readings Addressing key for multi-board systems; up to 50 boards on an Aqua-X Pro Working environment: 32–122°F, up to 90% RH In the box: AMP-3 sensor board, 16 ft RJ12 cable, 4 ft RJ12 cable, T-splitter.

    In stock

    $150.00 $142.50

  • Sale -5% TrolMaster PPH-3 inline pH sensor TrolMaster PPH-3 threaded pH probe

    TrolMaster TrolMaster PPH-3 Heavy-Duty Inline Nutrient pH Sensor

    In stock

    The TrolMaster PPH-3 is TrolMaster's improved pH probe, with a slimmer protective sleeve and a threaded body that installs in a standard 3/4" PVC tee. Drop it in the reservoir or run it inline on the feed line; it reports to your controller through an AMP-2 or AMP-3 sensor board. Range: pH 0–14, accuracy ±0.2 pH Drop-in or inline; threaded body fits standard 3/4" PVC tee fittings More stable sensing element and a shorter probe for tight spaces 3.6 m cable with BNC connector Connects through the AMP-2 (Aqua-X NFS-1) or AMP-3 sensor board (Aqua-X Pro and Plus, Green-X, Tent-X) Working environment: 32–122°F, up to 90% RH Store the probe capped in storage solution; a probe that dries out stops reading correctly In the box: one PPH-3 pH sensor.

    In stock

    $230.00 $218.50

  • Sale -5% TrolMaster PPH-2 heavy-duty pH sensor TrolMaster PPH-2 in-tank pH probe

    TrolMaster TrolMaster PPH-2 Heavy-Duty In-Tank pH Sensor

    In stock

    The TrolMaster PPH-2 is a heavy-duty pH probe made to live in your reservoir and report to your TrolMaster controller through an AMP-2 or AMP-3 sensor board. The long cable lets you place it where it reads best in the tank. Range: pH 0–14, accuracy ±0.2 pH 3.6 m cable with BNC connector Connects through the AMP-2 (Aqua-X NFS-1) or AMP-3 sensor board (Aqua-X Pro and Plus, Green-X, Tent-X) Suited to hydroponic reservoirs, aquariums and lab use Working environment: 32–122°F, up to 90% RH Store the probe capped in storage solution; a probe that dries out stops reading correctly In the box: one in-tank pH sensor.

    In stock

    $207.00 $196.65

  • Sale -5% TrolMaster PCT-3 inline EC and temperature sensor TrolMaster PCT-3 threaded EC probe

    TrolMaster TrolMaster PCT-3 Heavy-Duty Inline Nutrient EC and Temperature Sensor

    In stock

    The TrolMaster PCT-3 is TrolMaster's improved EC and temperature probe, with a slimmer protective sleeve and a threaded body that installs in a standard 3/4" PVC tee. Drop it in the reservoir or run it inline on your feed line. A more stable sensing element and shorter probe make it easy to fit in tight spaces. Measures nutrient EC and temperature, drop-in or inline EC range: 0–5 mS/cm, accuracy ±(0.05 + 2%) mS/cm Threaded body fits standard 3/4" PVC tee fittings 3.6 m cable with mini-DIN connector Connects through the AMP-2 (Aqua-X NFS-1) or AMP-3 sensor board (Aqua-X Pro and Plus, Green-X, Tent-X) Working environment: 32–122°F, up to 90% RH In the box: one PCT-3 EC/temp sensor.

    In stock

    $254.00 $241.30

  • Sale -5% TrolMaster PCT-2 heavy-duty EC and temperature sensor TrolMaster PCT-2 in-tank EC probe

    TrolMaster TrolMaster PCT-2 Heavy-Duty In-Tank EC and Temperature Sensor

    In stock

    The TrolMaster PCT-2 is a commercial-grade EC and temperature probe that sits in your reservoir and reports to your TrolMaster controller through an AMP-2 or AMP-3 sensor board. Its long cable gives you room to place it where you need it in the tank. Measures nutrient EC and water temperature EC range: 0–5 mS/cm, accuracy ±(0.05 + 2%) mS/cm 3.6 m cable with mini-DIN connector Connects through the AMP-2 (Aqua-X NFS-1) or AMP-3 sensor board (Aqua-X Pro and Plus, Green-X, Tent-X) Suited to hydroponic reservoirs, aquariums and lab use Working environment: 32–122°F, up to 90% RH In the box: one in-tank EC/temp sensor.

    In stock

    $230.00 $218.50

  • Sale -5% TrolMaster WD-1 water detector TrolMaster WD-1 water detector with touch spot

    TrolMaster TrolMaster WD-1 Water Detector with Touch Spot for Leak and Runoff Alerts

    In stock

    The TrolMaster WD-1 does double duty: lay it on the floor as a leak detector, or set it where runoff collects to confirm every irrigation actually happened. In verification mode, each Aqua-X output assigned to it has to register water within an adjustable delay, or the Aqua-X sends an "irrigation failure" alert. Two units can also run the Aqua-X Pro's reservoir auto-fill. Two modes: floor leak detection or irrigation verification Up to 25 WD-1 units per Aqua-X controller Two WD-1 sensors (tank bottom and top) can drive Aqua-X Pro auto-fill Listed for the Aqua-X, Hydro-X, Tent-X and Green-X systems LCD display and addressing button May not detect very low-TDS water such as RO water Working environment: 32–122°F, up to 90% RH In the box: water detector, touch spot, RJ12 T-splitter, 16 ft RJ12 cable.

    In stock

    $81.00 $76.95

  • Sale -5% TrolMaster MBS-SD smoke detector TrolMaster MBS-SD smoke detector for Hydro-X

    TrolMaster TrolMaster MBS-SD Smoke Detector for Hydro-X

    In stock

    The TrolMaster MBS-SD keeps watch for smoke in the grow room around the clock. Connect up to five to one Hydro-X controller, and if any of them picks up smoke you get an alert on your phone. Setup is plug and play, with a small button for assigning each detector's address. Continuous smoke monitoring with phone alerts Up to 5 detectors per Hydro-X controller Listed for the Hydro-X, Tent-X and Green-X systems Built-in address button; photocell for day/night detection Plug and play Output: 0–11.5 V, 0.2 A max Working environment: 32–122°F, up to 90% RH In the box: MBS-SD smoke detector, 16 ft RJ12 cable, RJ12 T-splitter.

    In stock

    $64.00 $60.80

  • Sale -5% TrolMaster MBS-PAR full spectrum quantum sensor TrolMaster MBS-PAR quantum sensor with post clamp

    TrolMaster TrolMaster MBS-PAR Full Spectrum Quantum PAR Sensor

    In stock

    The TrolMaster MBS-PAR is a full-spectrum quantum sensor that reads PAR from every light source over the canopy, LEDs included. Paired with a Hydro-X controller, it turns supplemental lighting up or down on its own to hold the PPFD you set. It mounts on a 1/2" post with the included clamp. Spectral range: 389–692 nm (±5 nm), accurate under LED lighting Measuring range: 0–4,000 PPFD; accuracy ±(10 + 5%) Holds a target PPFD by adjusting supplemental lighting through the Hydro-X Listed for the Hydro-X, Tent-X and Green-X systems On-site reading; plug and play Power: 12 V, 0.2 A max Working environment: 32–122°F, up to 90% RH; keep the sensor dry and out of spray and condensate In the box: quantum sensor, 1/2" post clamp, two 1/2" end caps, 4 ft RJ12 cable, RJ12 T-splitter.

    In stock

    $513.00 $487.35

  • Sale -5% TrolMaster MBS-Pro 4-in-1 sensor TrolMaster MBS-Pro sensor LCD

    TrolMaster TrolMaster MBS-Pro 4-in-1 Temp, Humidity, CO2 and Light Sensor for Hydro-X Pro/Plus

    In stock

    The TrolMaster MBS-Pro puts air temperature, humidity, CO2 and a photocell in one water-resistant sensor for the Hydro-X Pro and Hydro-X Plus. A built-in LCD shows current conditions right at the sensor, and a push-lock connection keeps the cable seated. Spread several around a large room and average the readings, or let each one run its own devices. Measures temperature, humidity, CO2 and light (day/night) Temperature: 32–138.2°F, ±0.36°F Humidity: 5–90% RH, ±3% CO2: 0–5,000 ppm, ±30 ppm ±5% of reading Built-in LCD for on-site readings Water-resistant plastic housing with push-lock connection Up to 50 sensors on one Hydro-X Pro Needs the SPH-1 splitter hub for supplemental power Power: 12 VDC, 0.04 A · Working environment: 32–122°F, 5–95% RH In the box: MBS-Pro sensor, 16 ft RJ12 cable, T-splitter.

    In stock

    $462.00 $438.90

  • Sale -5% TrolMaster MBS-TH 3-in-1 sensor TrolMaster MBS-TH temperature humidity light sensor

    TrolMaster TrolMaster MBS-TH 3-in-1 Temperature, Humidity and Light Sensor for Hydro-X

    In stock

    The TrolMaster MBS-TH is the 3-in-1 temperature, humidity and light sensor for the Hydro-X system, sold as a replacement or spare (the controller already comes with one). Its built-in photocell tells the controller when the lights are on, so it switches between day and night settings on its own. It's plug and play. Measures air temperature, relative humidity and light (day/night) Temperature: 32–138.2°F, ±0.36°F Humidity: 5–90% RH, ±5% Built-in photocell for automatic day/night mode Works with Hydro-X (HCS-1) and Tent-X (TCS-1); Hydro-X Pro and Plus use the MBS-Pro Power: 12 V, 0.2 A max Working environment: 32–122°F, up to 90% RH; keep the sensor dry and out of spray and condensate In the box: MBS-TH sensor, 16 ft RJ12 cable, RJ12 T-splitter.

    In stock

    $87.00 $82.65

  • Sale -5% TrolMaster Aqua-X Plus NFS-3 irrigation controller TrolMaster Aqua-X Plus NFS-3 touchscreen

    TrolMaster TrolMaster Aqua-X Plus NFS-3 Irrigation Controller with AMP-3 Sensor Board

    In stock

    The TrolMaster Aqua-X Plus (NFS-3) is a multi-zone irrigation controller with a 7" touchscreen, built for crop steering. It runs pumps and solenoids on precise schedules and monitors reservoir pH, EC and temperature along with media water content, EC and temperature. It connects to the internet over a standard CAT5 cable and works with TrolMaster's free app. 7" 800 x 480 touchscreen with free smartphone app control Crop steering irrigation with optional WCS-1 or WCS-2 water content sensors Controls up to 240 devices and monitors up to 25 sensors Capacity: 5 sensor boards, 20 water detectors, 20 water content sensors, 15 flow meters (DFM-1/2/3) Multiple Pump Link functions for master pumps Micro-SD card to save, copy, import and export settings Devices and sensors up to 1,000 ft (300 m) from the controller Input: 100–240 VAC, 50/60 Hz · ETL / FCC · IP20 In the box: Aqua-X Plus controller, AMP-3 sensor board, 12 V power adapter, RJ12 cable set, mounting plate.

    In stock

    $1,322.00 $1,255.90

  • Sale -5% TrolMaster Aqua-X Pro NFS-2 irrigation controller TrolMaster Aqua-X Pro NFS-2 touchscreen

    TrolMaster TrolMaster Aqua-X Pro NFS-2 Irrigation Controller with AMP-3 Sensor Board

    In stock

    The TrolMaster Aqua-X Pro (NFS-2) is a commercial irrigation controller that runs pumps and solenoids for several grow areas from one 10.1" touchscreen. It reads reservoir pH, EC and temperature plus media water content, and waters on timers, by volume, or on demand from flow and moisture sensors. Monitor and adjust it from the TM+ phone app or a web browser. 10.1" LED touchscreen with TM+ phone app and web-based control Up to 300 pumps and 300 valves (up to 50 control modules each on the pump and valve lines) Up to 50 irrigation schedules per day, plus calendar control for multi-day programs Reservoir pH, EC and temperature monitoring with the included AMP-3; media EC, temperature and moisture with WCS-2 Water use tracking with the DFM-1 flow meter; feed on demand, feed by volume and reservoir auto-fill Up to 50 sensor boards and water detectors in total, with mobile alerts Ports: USB, RJ12 module connections, CAT5/6 internet Input: 100–240 VAC, 50/60 Hz · ETL / FCC · IP20 In the box: Aqua-X Pro controller, AMP-3 sensor board, 12 V power adapter, two 12 ft RJ12 cables.

    In stock

    $2,755.00 $2,617.25

  • Sale -5% TrolMaster Tent-X TCS-1 grow tent controller TrolMaster Tent-X TCS-1 controller and sensor

    TrolMaster TrolMaster Tent-X TCS-1 Grow Tent Controller with 3-in-1 Sensor

    In stock

    The TrolMaster Tent-X (TCS-1) brings climate, lighting and irrigation control to a single grow tent. It ships with the MBS-TH 3-in-1 temperature, humidity and light sensor, and you can add CO2, PAR, smoke, water-content and pH/EC sensors as the tent grows. Up to four plug-in device stations run your fans, humidifiers, CO2 and pumps, all from the free smartphone app. Single-zone controller for grow tents: climate, lights and compact irrigation Free smartphone app control with data logging 2 lighting channels, up to 256 x 2 fixtures Sensors: 1 each of 3-in-1 (included), CO2 (MBS-S8), PAR (MBS-PAR), smoke (MBS-SD), AMP-3 pH/EC board and water content sensor; up to 2 water detectors (WD-1) Devices: up to 2 temperature, 2 humidity and 2 CO2 device stations, 4 program (timer) stations and 2 EC fan control adapters Irrigation: assign pumps and valves to program stations with single, multiple or recycle timer schedules 128 x 128 backlit LCD with button control; micro-SD for saving, copying, importing and exporting settings Input: 100–240 VAC, 50/60 Hz · ETL / FCC Controller size: 6.52" x 3.78" x 1.63" In the box: Tent-X controller, MBS-TH 3-in-1 sensor, 12 V power adapter, 16 ft and 4 ft RJ12 cables, 4 ft M12 cable, RJ12 Y-splitter.

    In stock

    $330.00 $313.50

  • Sale -5% TrolMaster Hydro-X Pro HCS-2 controller TrolMaster Hydro-X Pro HCS-2 touchscreen

    TrolMaster TrolMaster Hydro-X Pro HCS-2 Grow Room Controller with 4-in-1 Sensor

    In stock

    The TrolMaster Hydro-X Pro (HCS-2) runs a whole grow room from one 10.1" touchscreen. It controls temperature, humidity, CO2 and lighting independently, builds multi-week crop schedules on a built-in calendar, and lets you check in from the free smartphone app or web software. It comes with the MBS-Pro 4-in-1 sensor and works with existing Hydro-X device stations and modules. 10.1" touchscreen controller with free app and web-based control Independent control of temperature, humidity, CO2 and lighting Setting ranges: 40–100°F, 20–99% RH, 300–2,500 ppm CO2, 10–2,000 PPFD Up to 50 sensors (MBS-Pro, MBS-PAR, WCS water content) and 50 device stations 2 lighting channels; up to 256 x 2 HID fixtures; devices up to 1,000 m from the controller Save, copy, import and export settings by USB or micro-SD Input: 100–240 V, 50/60 Hz ETL / FCC · IP20 Not compatible with HughesNet or Viasat satellite internet In the box: HCS-2 controller, MBS-Pro 4-in-1 sensor, mounting plate, 4 ft cable.

    In stock

    $2,755.00 $2,617.25

  • Sale -5% TrolMaster HCS-3 Hydro-X Plus Controller w/ 4-in-1 Sensor

    TrolMaster TrolMaster HCS-3 Hydro-X Plus Controller w/ 4-in-1 Sensor

    In stock

     The Hydro-X Plus / HCS-3 system is a professional-grade single-zone environmental control system that can control your entire grow space. It has an 800x480 7” LED display monitor and can control an unlimited number of lights, 8 temperature devices, 8 humidity devices, 4 CO2 devices, and 12 programmable timer devices (up to 50 schedules can be created). With incredible flexibility and the expanded product capacity, anyone can now easily customize their own grow room control system for maximum yields. Having multiple control modules also provides the option for the user to create multiple "stages" of temperature and humidity control, which will provide a more stable environment.  The HCS-3 system comes with an MBS-PRO 4-in-1 sensor to measure temperature, humidity, CO2 ppm, and the presence of light. Lighting control has never been easier or more capable. The optional MBS-PAR light sensor can be added to the system. It will automatically adjust light intensity to precisely provide the exact amount of illumination for optimum plant growth. The Hydro-X Plus has been can also track your DLI levels. Having 2 separate lighting control channels allows the user to create multiple lighting layouts (and dimming sequences) based on their individual preferences.  Besides controlling your room, if a problem is detected by the HCS-3, a warning message (notification) will be sent to your smartphone. Up to 10 smoke detectors and 10 water leak-detectors can be connected to the HCS-3 which will alert you if there are any fire or water leaks. The HCS-3 also offers multiple advanced functions to control your entire grow room or greenhouse such as Sunrise / Sunset simulation, DLI control, overheat protection, Spectrum & Group lighting control, and more.

    In stock

    $1,322.00 $1,255.90

  • Sale -5% TrolMaster Hydro-X Thermostat Station (Heat/Cool)

    TrolMaster TrolMaster Hydro-X Thermostat Station (Heat/Cool)

    In stock

    TS-2 Thermostat Station is specifically designed to replace the traditional thermostat to control four system types of equipments (Heat/Cool, Cool only, Heat only, Heat pump). It will control your four system equipments by Day/Night setpoint base on the photocell status. Connect the TS-2 to where your thermostat is on the wall using preexisting wires, now you can use the TS-2 in conjunction with the Hydro-X to control heating & cooling equipments.

    In stock

    $139.00 $132.05


You have seen 96 out of 119 products