Controllers
-
TrolMaster AMP2 - Aqua-X Sensor Board (connects sensors to controller)
The AMP-2 module connects the Aqua-x to a set of precision pH / EC & temperature probes to constantly measure the pH / EC & temperature of the water being sampled. The AMP-2 works with the TrolMaster PCT-1&2 and the PPH-1&2 probes. Once connected to the Aqua-x, the AMP-2 will display the sensor data on the Aqua-x and on the APP. The minimum and maximum “limits” can be set on the Aqua-x providing 24/7 notification of pH / EC or temperatures that are out of limits.
$115.00 $103.50
-
TrolMaster TrolMaster DSC-1 Co2 Controller
The TrolMaster DSC-1 CO2 control / device module allows user the to easily connect and control standard supplemental CO2 devices or CO2 exhaust controls to the Hydro-x. Any CO2 device that is 10-amps @ 120 volts or less can be controlled by the DSC-1.
$70.00 $63.00
-
TrolMaster TrolMaster SPH-1 8 Way Splitter
The SPH-1 Splitter Hub from TrolMaster makes installation of our controllers as easy as plugging in a phone cable. The SPH-1 hub uses a single RJ12 cable input jack, and provides (8) individual RJ12 output jacks that can be connected to various TrolMaster sensors, adapters and device modules. Using the SPH-1 allows for a "clean" installation and eliminates the need for daisy-chain Y-splitters to be used to interconnect multiple modules or sensors.The SPH-1 is also a powered hub, meaning that it will boost the signals passing through the SPH-1 allowing more modules, sensors and light adapters to be connected to the TrolMaster controllers. By using the SPH-1, an almost unlimited number of LED / HID lights can be controlled using a single TrolMaster controller. The SPH-1 comes complete with the SPH-1 hub, a 16 foot RJ12 cable and the 12vdc power supply.The SPH-1 can be located in a central location with a single RJ12 cable connecting it to the main controller. From the SPH-1 hub, the individual RJ12 jacks can be connected to each of the sensors, device modules, or lighting adapters.
$33.00 $29.70
-
TrolMaster TrolMaster DSH-1 Humidity Controller
The TrolMaster DSH-1 Humidity control / device modules allow user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated at 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload.
$70.00 $63.00
-
TrolMaster TrolMaster ECS-1 Splitter Cable Set
TrolMaster modules and sensors all come complete with a RJ12 16ft cable, Y-splitter and RJ12 4 ft cable to connect to the Hydro-x. When connecting modules that are farther apart, you can use the Extension cable set ECS-1. The ECS-1 comes complete with another 16ft cable, Y-splitter and 4 ft cable.
$20.00 $18.00
-
AC Infinity AC Infinity CO2 Controller, Smart Outlet Carbon Dioxide Monitor for CO2 Regulators and Inline Fans
A smart outlet controller to optimize your environment for growing by managing CO2 output and removal. Supports and independently programs CO2 regulators and exhaust fans for use in indoor grow settings. Custom CO2 and fan programming dynamically alternate to activate in response to carbon dioxide levels. Other programming includes precision cycles, night scheduling, and environmental data tracking. Advanced sensor precisely measures your grow space climate to ensure accurate readings. PRODUCT DESCRIPTION An intelligent carbon dioxide controller designed to maintain proper CO2 levels in your home or grow space. By pairing this smart outlet controller with your CO2 output and exhaust system, you can create an effective environment for your plants to grow in. Equipped with two outlet plugs that are independently programmed and allow you to mix and match CO2 regulators and exhaust fans. This smart controller will alternate between CO2 and fan trigger programming to dynamically increase or decrease carbon dioxide levels, respectively. Track the state of your grow space through its state-of-the-art sensor as it delivers fast and stable readings. SMART RESPONSE TO CO2 In addition to CO2 and fan programming that dynamically trigger in response to changing carbon dioxide levels, this outlet controller also features cycles for customized activations. Set schedules and alarms to keep yourself on top of your grow space environment while ensuring CO2 content in your grow space stays at safe levels at night. Effectively track historical data of CO2 levels over time, featuring high and low PPM level thresholds for custom data spreads. COMPATIBILITY This smart CO2 controller includes two outlets to power and independently program CO2 regulators and exhaust fans. Able to support up to 1100W. Fit for use to monitor and adjust carbon dioxide levels in home and grow settings like greenhouses, grow rooms, grow tents, workrooms, labs, and more.
$129.00
-
Vivosun Vivosun GrowHub E25 Controller, Supports Smart Grow System Devices, Easy to Install & Use, WiFi App Controllable, Expansion Port for E42/E42A
Vivosun GrowHub E25 Controller, as an expansion port for GrowHub E42/E42A supporting SGS Devices, is WiFi Controllable and easy to install and use. Flexible Combinations: The GrowHub Controller E25 supports SGS devices like the AeroLight, AeroZesh, and AeroWave E, allowing you to freely combine devices in your grow tent; w/ RJ45 cables, you can connect multiple AeroLights. App Controlled: The GrowHub Controller is WiFi-enabled to allow remote monitoring and control of equipment w/ the Vivosun App from anywhere, anytime - from your couch to abroad; Expand the controller’s capabilities w/ grow recipes and other powerful settings. Plug and Play: To install the E25, you only need to insert it to the Type C port of your SGS devices and connect it to the WiFi; Small size and compact design w/ one button for WiFi configuration and a clear status indicator light, you’ll get more flexibility and ease of use. Smart Grow: w/ a smart auto-mode and professional grow recipes settings through the App, you can set your lights, circulation fans, and duct fans based on the different growth stages, and maximum yield w/ minimal effort. Expansion to GrowHub E42/E42A: GrowHub E25 can either schedule independently or share the same schedule w/ GrowHub E42./E42A; You can add E25 and E42/E42A to the same garden on Vivosun App, and use E25 as an expansion port for E42/E42A.
$19.99
-
Vivosun Vivosun GrowHub A10 Controller, Smart Plug, 15A 1800W, Remote Control, Compatible with Vivosun App for Grow Tent
GrowHub A10 Controller, Smart Plug, 15A 1800W, Remote Control, Compatible with Vivosun App for Grow Tent Unify Your Equipment: Operate devices individually or integrate them with the GrowHub A10 for seamless control; Simplify gardening tasks, achieve precise management, and maintain a stable environment for optimal plant growth (Compatible with wired devices featuring mechanical switches or basic on/off functionality) Effortless Automation: Automate control seamlessly with app-based scheduling; Easily manage devices; It operates locally even when offline, keeping your growing process uninterrupted Safe Growing: Made with fire-resistant material, this ETL-certified outlet quickly reacts to overheating, overload, or malfunctions, ensuring reliability Access Anytime, Anywhere: The GrowHub Controller is WiFi-enabled, allowing you to control and monitor your equipment from virtually anywhere via the app; Unlock advanced features like Grow Recipes and customizable settings Wide Compatibility: Featuring a 15A outlet supporting up to 1800W, this compact smart plug works with most devices; Expand and customize your Vivosun Smart Grow System (SGS) effortlessly
$19.99
-
Vivosun Vivosun GrowCam C4, 2K QHD WiFi Smart Camera for Grow Tent & VGrow Smart Grow Box, Timelapse, Night Vision, SD Card Storage, 2-Way Audio, App Control
With 2K QHD resolution, this smart camera captures vivid details of your plants, letting you admire them up close. The time-lapse function unveils their growth journey in stunning videos you can easily share with friends. Day/night mode ensures 24/7 clear recording, with plant-safe night vision designed to protect their natural cycles. Use the Vivosun app to check on your plants wherever you are. 2K Crystal Clear: The 2K 4MP QHD ultra-clear lens captures vivid details, letting you observe your plants up close; Specially adjusted for grow setups, it offers a true-to-life view See Growth Unfold in Time-Lapse: Use the time-lapse function (MicroSD card required) to capture your plant’s journey from seedling to bloom; Share these stunning videos with friends on social media Non-Stop Recording: Day/night mode provides 24/7 clear recording, ensuring you never miss a moment of your plants’ growth; Insert a microSD card (not included) up to 512 GB to save continuous footage and replay it Monitor Anytime, Anywhere: Control the camera through the Vivosun app and monitor your plants wherever you are Multiple Mounting Options: Easily install this camera using magnetic mounts, screws, pole clamps, or by placing it on flat surfaces; Compatible with grow tents, VGrow systems, and other setups
$49.99
-
Vivosun Vivosun GrowHub A22 Controller with Temperature and Humidity Sensor Probe, Compatible with Vivosun App for Grow Tent
Use the GrowHub Outlet Controller A22 to monitor and control your devices anywhere, anytime with the Vivosun app. Automate daily tasks with smart timers and grow recipes, all hands-free. WiFi down? Don’t worry, the device can work locally to keep your growing process running smoothly. Unify Your Equipment: Operate devices individually or integrate them with the GrowHub A22 for seamless control; Simplify gardening tasks, achieve precise management, and maintain a stable growing environment for optimal plant health (Compatible with any wired device featuring a mechanical switch or basic on/off functionality) Effortless Automation: Automate control effortlessly based on scheduling and temperature/humidity triggers from the app; It operates locally even when offline, keeping your growing process uninterrupted Safe Growing: The external sensor accurately monitors temperature and humidity, while the ETL-certified outlet quickly adjusts if issues arise (e.g., overheating); Real-time alerts notify you when conditions fall outside your desired range, ensuring a safe environment Access Anywhere, Anytime: The GrowHub Controller is WiFi-enabled, allowing you to control and monitor your equipment from virtually anywhere via the app; Unlock advanced features like Grow Recipes and powerful customization options Wide Compatibility: With two outlets (TOTAL 15 A) and two USB ports (Each 5V 1A), this smart plug supports most growing devices, making your setup smarter and more efficient; Expand and customize your Vivosun Smart Grow System (SGS) effortlessly
$30.00
-
AC Infinity AC Infinity SPECTRON 3, AI-Powered Grow Camera 4K, Advanced Plant Health and Growth Monitoring
Smarter Vision, Smarter Grow: Grow camera designed for indoor tents to monitor, record, and timelapse plant growth from anywhere. With AI to assist with tracking growth and potential health issues of hemp plants. Ultra-Sharp 4K Imaging: Monitor, record, and replay your grow from anywhere using our app. Capture stunning 4K stills and timelapses (MicroSD not inc.) and view during lights off with plant-safe 940nm IR night vision. Health and Growth Insights: Detects signs of plant stress and environmental changes, helping you adjust watering, nutrients, and care routines. Provides tailored insights while tracking plant stages, growth rates, and bud development over time. Controller Integration: Syncs with our AI environmental controllers to unlock vision-driven automations, from dimming grow lights when heat stress is detected to adjusting devices when the tent door opens. Designed for Grow Tents: Weatherproof IP67-rated design with adjustable clamps that can secure onto any grow tent pole. Featuring dual 360° rotating joints that enable precise positioning and an optimal view.
$89.99
-
AC Infinity Peristaltic Pump, Two-Outlet Dosing for Hydroponics, 10-Level Control, 21 to 210 ml/min
Peristaltic pump designed to distribute exact amounts of liquids in milliliters in applications where pH control is vital. Features precision 10-level control for exact flow rates in 21 mL equal intervals (up to 210 mL per minute). Built with a cutting-edge DC motor that runs with low noise output and energy-efficiently for long-lasting use. Compatible with AI and UIS™ controllers for fine-tuned dosing. Access smart programming and dosing in seconds intervals via WiFi app control. Engineered for hydroponics, aquariums, and labs, safely dosing nutrients, calcium buffers, and chemical reagents with a sealed, leak-free system for precision and purity. Product Description This peristaltic dosing pump distributes precise amounts of liquid for accurate pH and nutrient control in hydroponic, aquarium, and laboratory applications. Using this pump system will ensure your liquids only pass through the included tubing so your solutions receive proper dosing. Operating with milliliter-level precision, it delivers exact flow rates with a 10-level adjustable system, dispensing 21 mL intervals up to 210 mL per minute. Powered by a high-efficiency DC motor, it runs quietly and energy-efficiently for long-term reliability. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to unite with the AC Infinity app over WiFi to achieve your ideal environment. This smart ecosystem of grow devices can continue to run even if it is disconnected from your WiFi, keeping your grow safe and thriving. Intelligent Integration When paired with AI controllers and the WiFi app, this dosing pump allows for fine-tuned flow adjustments, as well as dosing in seconds intervals, enabling automated schedules and real-time monitoring. This ensures your system maintains the ideal pH and nutrient balance with minimal manual intervention. Versatile Applications Designed for use in hydroponics, aquariums, and scientific research, this roller pump maintains stable conditions by precisely dosing nutrient solutions for plant growth, calcium buffers for reef tanks, and chemical reagents for experiments. Its sealed, leak-free system ensures contamination-free delivery, while smart tracking and automation provide efficient and reliable dosing for optimal results.
$99.00
-
AC Infinity AC Infinity THERMOFORGE T7, Plant Heater 1000W with AI-Powered VPD Temp Controller
Powerful 1000W heater with smart AI control and a multi-configuration design to optimize the climate for all plant growth stages. Temperature and VPD programming powered by adaptive AI that dynamically adjusts heat output to maintain your target environment. Utilizes individual PTC plates with PWM control to deliver 10 true heat levels or intake fresh air for balanced climate control. Dual ports enable you to duct directly into your grow space or create a closed-loop setup for optimal heating efficiency (ducting not included). Connects with UIS controllers for WiFi app connectivity—unlocking advanced automations, data tracking, alerts, and grow guides. Intelligent Climate Control for Every Growth Stage Experience precision-engineered climate management with this powerful 1000W AI-driven heater. Designed to optimize growth through every stage, it automatically adjusts temperature, airflow, and VPD to maintain your target environment. Individual PTC plates with PWM control deliver 10 true heat levels or fresh air intake for balanced conditions, while dual duct ports support both open- and closed-loop setups for versatile integration. This product is ETL-certified with safety features including tip-over alarms, flame-retardant materials, and overheat protection with auto-restart it delivers performance you can trust. Designed exclusively for indoor use. Operate only in controlled environments with humidity between 30%–65% RH, including incoming airflow. Do not use outdoors or in high-humidity areas. Do not use with humidifiers in closed-loop setups. Mist may enter intake ducting and damage the heater. Plug heaters only into a grounded wall outlet with surge protection. Never use extension cords or power strips, as this may cause overheating or melting. Do not share the outlet with other devices. Adaptive AI for Predictive Climate Management Powered by adaptive AI, the system continuously learns from your environment to maintain precise temperature and VPD targets. Its intelligent algorithm dynamically adjusts output to match your programmed ranges, responding instantly to environmental fluctuations, throttling in precise percentages to deliver unmatched accuracy and control. When connected through UIS controllers, growers can access real-time data tracking, alerts, and advanced automation to maintain the perfect climate 24/7. Dual Airflow Modes and Flexible Ducting Options Engineered for versatility, this unit offers both heat and fresh air intake outputs to achieve balanced environmental control. Dual duct ports allow easy setup in open-loop configurations for fresh air exchange or closed-loop systems for maximum heat efficiency. Whether you’re optimizing for optimal heat retention or airflow renewal, this modular design provides flexible, precise control over your grow space. Ducting not included.
$129.00
-
AC Infinity AC Infinity AI Water Sensor, for Liquid Presence Detection, IP68
A sensor designed specifically for AC Infinity AI Controllers to monitor the presence or absence of water. Allows AI controller to provide leak detection, alerts, and advance controls via the AC Infinity app, triggering water devices as needed. Versatile mounting options with both secure suction and powerful magnetic attachments for maximum adaptability. IP68-rated to guarantee the sensor is safeguarded against continuous immersion in water up to 3 meters in depth. This sensor is engineered to enhance various settings, from aquariums to industrial water tanks, providing a versatile solution for monitoring and managing water levels. Product Description This water sensor is designed specifically for AC Infinity AI Controllers to help monitor the presence or absence of water. It achieves this by sending alerts and activating automated devices to maintain ideal conditions. With an IP68 rating, the sensor can be submerged up to 3 meters in depth for a continuous period. Designed for diverse applications to improve various settings, from aquariums to grow spaces, this device provides a versatile approach to water management. Intelligent Pairing When used with our AI controllers and Wi-Fi app, this sensor detects when water levels are low based on its mounted height, allowing your controller to activate devices that help replenish your water supply. It can also deliver real-time leak detection and enable advanced control options with instant alerts. This ensures your space gets the right amount of water at the right time. Advanced Tracking This water sensor will play a crucial role in both plant cultivation and aquarium maintenance, providing vital information that helps track optimal growth conditions and healthy aquatic environments. Consistent tracking will enable your controller to automatically adjust watering schedules based on real-time data, leading to healthier growth, increased yields, and stable environments.
$26.99
-
Autopilot Autopilot CO2 Monitor & Controller w/15' Remote Sensor
Autopilot APC8200 CO2 Monitor & Controller with Memory offers a simple and affordable way to control, monitor and record CO2 levels over an adjustable period of time. Trace your room's CO2 levels over minutes, hours, or up to 7 days with this easy-to-use controller. The APC8200 also boasts a fully customizable CO2 setpoint and deadband. Adjust and review your CO2 levels when you want to and how you want to. The APC8200's memory feature gives growers a real edge in fine-tuning the grow room environment. Optimize your CO2 levels with this precision controller from Autopilot! FEATURES: Fully customizable ppm deadband and CO2 setpoint allow flexibility in programming Trend Chart records CO2 levels per minute, hour, day and week for accurate analysis of CO2 distribution Adjustable Trend Chart Zoom levels let you trace your ppm levels Remote CO2 sensor probe w/photocell & 15' data cable lets you take readings from proper grow room locations 2-Channel Low Drift NDIR Sensor precisely reads CO2 ppm levels Green LED identification lights inform you of the unit's status at all times APC8200 Error Codes: Fault Icon Description of the fault Suggested Actions Err4 IR lamp error Please reconnect power adapter, if the Err4 still appears, please contact the service department. Err5 Internal parameter error Please reconnect power adapter, if the Err5 still appears, please contact the service department. Err6 Sensor unit Connect Error Please reconnect sensor unit and redo power on, if the Err6 still appears, please contact the service department. Err7 temperature or humidity error Please turn off power adapter, and put the device in a dry place more than 12 hours. Err8 Internal calculate error Please reconnect power adapter, if the Err6 still appears, please contact the service department.
$323.54 $275.13
-
Autopilot Autopilot CO2 Replacement Sensor w/15' Cable (for APC8200)
This is a replacement CO2 sensor for the Autopilot APC8200 Remote CO2 sensor probe w/photocell & 15' data cable lets you take readings from proper grow room locations 2-Channel Low Drift NDIR Sensor precisely reads CO2 ppm levels
$157.24 $133.70
-
Autopilot Autopilot 4-Light High Power HID Controller 4000W (120V/240V) 30A (DISCONTINUED)
Control multiple lights from one timer or controller device. Power is wired directly into the four-outlet timer box and all of the outlets are controlled by one detachable 120V trigger cable. Rated for 30 amps at 120/240 volts. The trigger cable can be plugged into a standard 24-hour timer or environmental controller. Three year no hassle warranty.APCL4DX has four 120/240 volt style outlets which allow running your ballasts at 120/240 volts without having to change out your ballast power cords.FEATURES:4000W 4-light controller Premium quality industrial grade relay X-style outlets allow 120V or 240V ballast operation 30A maximum Attached 120V trigger cable Improved terminal blocksSpecs:RATED AMPERAGE: 30 FREQUENCY: 50/60Hz VOLTAGE: 120/240
$134.99
-
Autopilot Autopilot Analog Day & Night Cooling/Heating Thermostat (DISCONTINUED)
Autopilot 24 hr Day & Night Cooling/Heating ThermostatThe APCET2 is a temperature controller that can be used as a cooling OR a heating device. It automatically powers the device connected based on the selected day and night set points. The user can choose to have different day and night temperature set points that are automatically detected by the built-in photocell. The knobs make it easy to adjust the settings. We added a Memory-lock feature which will lock the set points into memory for consistent performance, even if the knobs are accidently bumped. Controls heating or cooling equipment with both day/night set points Includes 20' remote precision temperature sensor Temperature control differential +/- 3F Built-in photocell 120v, 15 amps max
$62.99
-
Autopilot Autopilot 8-Light High Power HID Controller 8000W (120/240V) 60A (DISCONTINUED)
Control up to eight lights from one timer or controller device. 240V power is wired directly into the eight outlet timer box, and all of the outlets are controlled by one detachable 120V trigger cable. Rated for 60 amps at 120/240 with eight 120/240V X-style receptacles. The light controller is backed by a hassle free 3 year warranty. APCL8DX has eight 120/240 volt style outlets which allow running your ballasts at 120/240 volts without having to change out your ballast power cords. FEATURES:8000 Watt, 8 light controller Premium quality industrial grade relay X-style outlets allow 120V or 240V ballast operation 60 Amp maximum (30 amps x 2 relays) Attached 120V trigger cable Upgraded terminal blocksSpecs:RATED AMPERAGE: 60 FREQUENCY: 50/60Hz VOLTAGE: 120/240
$219.99
-
AC Infinity AC Infinity Climate Sensor for Controller 69 Pro and Pro+ and UIS Devices, Precise VPD, Temperature, and Humidity Readings, 20 ft
A smart sensor probe designed to detect temperature and humidity conditions for AC Infinity universal controllers. Using a Swiss-made thermal-alloy head, the climate sensor uses type 316 SAE steel that can adapt to rapidly changing climate conditions. This allows it to provide pinpoint accurate temperature and humidity readings and enables you to quickly adjust your fan to your cooling or heating needs. The corded probe has an IP-44 rating, able to withstand humid conditions by resisting splashing water and dust. Comes in 20 feet in length for spot detection coverage applications such as grow tents, HVAC ductwork, tool sheds, and AV component closets.
$21.99
-
AC Infinity CO2 Regulator, Carbon Dioxide Monitor with Solenoid Valve and Gas Flow Meter
A carbon dioxide regulator designed to help create the ideal environment for plant growth by managing the output of CO2 into the air. Features a flow meter with a pressure gauge that accurately measures gas flow as well as the remaining gas levels. These measuring systems will enable you to determine the exact amounts of CO2 to release that will improve your plant’s growth rate. They are built into a durable brass construction with a solenoid valve that ensures a proper stream with no leakage. Fits into many standard tanks with threaded valves to function as a CO2 generator in grow tent or grow room settings.
$46.99
-
AC Infinity AC Infinity CO2 + Light Sensor for Controller AI+, CO2 Data Tracking, Optimized FAE, Day & Night Scheduling, Enables Equipment Control Programming
This sensor is designed for use with the AC Infinity AI Controllers to help monitor CO2 levels through adaptive automated learning. CO2 sensor pairs with AI Controllers and our Wi-Fi enabled app to precisely control and disperse carbon dioxide within grow spaces based on most beneficial light cycle. Custom CO2 and fan programming dynamically alternate to activate in response to carbon dioxide levels optimizing FAE (Fresh Air Exchange) Additional programming includes day & night scheduling, precision cycling, and environmental data tracking. Smart programming can set minimum intake speed to improve efficiency of plant environment based on PPM. Product Description The innovative CO2 + Light sensor is designed for direct use with our cutting-edge AI controllers featuring adaptive self-learning to automate a crucial role in monitoring and maintaining optimal CO2 levels essential for healthy plant growth. The precision of the sensor ensures exact control and dispersal of carbon dioxide within grow spaces. When connected to our Wi-Fi app, view accurate, real-time data, ensuring plants receive the ideal amount of CO2 for maximum growth. Smart Response to CO2 Smart programming allows the sensor to coordinate with a fan to detect the most acceptable amount of CO2, turning the fan on only when needed generating the most efficient fresh air exchange (FAE) and points per million (PPM). This directly impacts the efficiency of photosynthesis, leading to healthier and more robust plants. Compatibility Enhanced features including day and night scheduling, precision cycling, and comprehensive environmental data tracking significantly optimize the sensor's performance and overall benefits. These capabilities allow for precise control and monitoring, ensuring the sensor operates efficiently under varying conditions.
$49.99
-
AC Infinity AC Infinity Climate Sensor for Controller AI+, Precise VPD, Temperature, and Humidity Readings, 24 ft.
A corded sensor extension cord designed for Controller AI+ in HVAC and grow applications. Engineered with Swiss-made thermal-alloy probe heads offering precise temperature and humidity measurements. Adapts to rapid climate fluctuations using SAE grade-316 steel to provide up-to-the-minute readings. Water-resistant gasket enables IP44 protection against interference resulting from moisture and dust. 24 ft. length for spot detection coverage in grow tents, HVAC ductwork, tool sheds and AV closets. Product Description A smart sensor probe designed for Controller AI+ to detect temperature and humidity conditions, and calculate VPD measurements. Using a Swiss-made thermal alloy head, the climate sensor uses type 316 SAE steel that can adapt to rapidly changing climate conditions. This allows it to provide pinpoint accurate temperature and humidity readings and enables you to adjust your smart devices to your environmental needs quickly. The corded probe features a water-resistant gasket that blocks splashing water and dust so your controller can withstand humid conditions with IP-44 moisture resistance. It is 24 feet in length for spot detection coverage applications such as grow tents, HVAC ductwork, tool sheds, and AV component closets.
$19.99
-
Galcon Galcon 8006 AC-6 6 Station Zone Irrigation Controller Automatic Sprinkler System with Daily/Cyclic Programmable Timer, Indoor Plant Watering System Valve Box
The Galcon 8006 AC 6 is an entry level residential Indoor Irrigation controller. Designed to operate up to 6 Irrigation Control Valve. + Master Valve/Pump Start. In addition to outstanding durability, the 8006 AC 6 features a large easy-to-program LCD screen and Four Buttons for programming. This controller. Offers the ultimate flexibility in scheduling by offering independent programming of each valve and the ability to operate two valves simultaneously.Programming can be set by day of the week [Daily/Weekly] or in cycles [Cyclic] and with irrigation duration as short as 1 minute to as long as 12 hours. Up to 4 start times per valve may be used when daily/weekly programming is used or a cycle as short as every day to as long as every 30 days may be used when cyclical programming is used.The available sensor input can be used with a rain sensor, soil moisture sensor, etc. to conserve water. The sensor input is assigned to individual valves providing you with the flexibility of preventing irrigation in areas that are exposed to rain [lawn] and allowing irrigation to areas that are not exposed to rain [covered patio].Monthly Water Budgeting can be used to adjust irrigation from 10% - 190%. Rain Delay of up to 30 days and auto re-start.Automatic, Semi-automatic and manual mode for each valve or all of the vales simultaneously while automatic short circuit detection isolates the shorted valve, provides a visible "alarm" on the LCD and continues irrigation for the rest of the valves. This product is designed for use only in the USA and Canada
$124.99
You have seen 72 out of 87 products