TrolMaster
-
TrolMaster TrolMaster SCC-2 35-Inch Large Controller Cabinet for Hydro-X Pro
The TrolMaster SCC-2 is the large 35-inch version of TrolMaster's modular controller cabinet for the Hydro-X Pro and Aqua-X Pro, with extra room for device stations, power supplies and control boards. Built-in RJ12 splitter boards and outlets keep a big system wired clean, organized and dry. For Hydro-X Pro (HCS-2) and Aqua-X Pro (NFS-2) controllers Size: 35" x 18" x 6.26" IP56 enclosure rating (NEMA 4X equivalent) with the included controller gasket fitted Input: 120 V, 50/60 Hz, 15 A max Built-in RJ12 splitter boards and power outlets for device stations and boards Holds up to 8 TS/HS/TSH/VPD modules Detachable design; lay out your own cabinet with bi-directional RJ12 cables Working environment: 32–104°F, up to 90% RH In the box: SCC-2 cabinet, controller rubber gasket, RJ12 cables, OA6 board power cables and screw sets, installation manual.
$1,322.00 $1,255.90
-
TrolMaster TrolMaster SCC-D Solid Cabinet Door for SCC-1 and SCC-3, No Window
The TrolMaster SCC-D is a solid replacement front door, with no pre-cut controller window, for the 25-inch SCC-1 and SCC-3 controller cabinets. Swap it on to turn a pre-wired SCC cabinet into a sealed enclosure for a different TrolMaster main controller mounted inside, or to add a second cabinet to a Pro system. Fits the 25-inch SCC-1 and SCC-3 controller cabinets Solid panel with no pre-cut controller window Lets a pre-wired SCC cabinet house other TrolMaster main controllers inside Industrial-rated, waterproof cabinet design Detachable design In the box: one 25-inch controller cabinet door without pre-cut window.
$109.00 $103.55
-
TrolMaster TrolMaster Delta-1 VFD Drive for 3-Phase Fan Motors, 5 HP, 380-480V
The TrolMaster Delta-1 is a compact variable frequency drive (a customized Delta ME300) built to pair with the TrolMaster VFD-1 station and a Hydro-X Pro, so the controller can set the speed of large three-phase fan motors. It comes with its parameters preset for TrolMaster, and an RJ45 cable connects it to the VFD-1. For three-phase AC motors only; single-phase motors can't be used with the VFD-1 or Delta-1 Input: 3-phase 380–480 V, 50/60 Hz Output: 3-phase 0–460 V, 5 HP (3.7 kW) Output frequency: 0–599 Hz Enclosure: IP20 / UL open type; NEMA 1 / UL Type 1 with a conduit box kit Parameters preset for the TrolMaster VFD-1 module (sold separately) and Hydro-X Pro In the box: Delta-1 drive, RJ45 cable.
$727.00 $690.65
-
TrolMaster TrolMaster Carbon-X DSE-1 CO2 Emergency Stop Station
The TrolMaster DSE-1 is the CO2 emergency shut-off for the Carbon-X system. It's a controlled outlet that powers your CO2 solenoid valves during normal operation, and the Carbon-X cuts its power automatically if any installed CO2 sensor reports a fault or a high CO2 level. If the DSE-1 loses communication with the controller, its power shuts off too. Controlled outlet for CO2 solenoid valves Power cut automatically on a sensor fault, high CO2 or lost communication Input and output: 100–240 VAC, 50/60 Hz · 10 A max output LED status: fast green blink (not yet addressed or poor connection), slow green blink (connected, off), solid green (on), red blink (overloaded) RJ12 socket with push-button addressing; plug and play Working environment: 32–122°F, up to 90% RH In the box: DSE-1 station, 16 ft and 4 ft RJ12 cables, RJ12 T-splitter.
$115.00 $109.25
-
TrolMaster TrolMaster SCC-1 25-Inch Standard Controller Cabinet for Hydro-X Pro
The TrolMaster SCC-1 is a 25-inch modular controller cabinet for the Hydro-X Pro and Aqua-X Pro. The controller mounts in the door and the device stations, power supplies and boards mount inside, with built-in RJ12 splitter boards and outlets that keep the whole system wired clean, organized and dry. For Hydro-X Pro (HCS-2) and Aqua-X Pro (NFS-2) controllers Size: 25" x 18" x 6.26" IP56 enclosure rating (NEMA 4X equivalent) with the included controller gasket fitted Input: 120 V, 50/60 Hz, 15 A max Built-in RJ12 splitter boards and power outlets for device stations and boards Holds up to 8 TS/HS/TSH/VPD modules Detachable design; lay out your own cabinet with bi-directional RJ12 cables Working environment: 32–104°F, up to 90% RH In the box: SCC-1 cabinet, controller rubber gasket, RJ12 cables, OA6 board power cables and screw sets, installation manual.
$1,101.00 $1,045.95
-
TrolMaster TrolMaster AS-5 Audible and Visual Alarm Station, Siren and Strobe
The TrolMaster AS-5 is a compact siren-and-strobe alarm you can mount inside or outside a grow room or facility. It goes off when the parameter you pick runs above or below its preset level. Power it from a DSD-1 dry contact station to use it with the Carbon-X CDA-1 (on sensor channel AL-1, AL-2 or both), or connect it straight to a Hydro-X Pro (HCS-2) or Hydro-X Plus (HCS-3). Siren: 85 dB · Red strobe: 120 flashes per minute Rated voltage: 12/24 VDC, 60 mA Connector: 5.5 x 2.1 mm DC male plug Works with Hydro-X Pro, Hydro-X Plus and the Carbon-X CDA-1 (through a DSD-1) Size: 3.23" x 3.23" x 2" Plug and play Working environment: 32–122°F, up to 90% RH In the box: AS-5 alarm.
$50.00 $47.50
-
TrolMaster TrolMaster Carbon-X AS-1 CO2 Alarm Station with Siren and Strobe
The TrolMaster AS-1 is a complete CO2 alarm station for the Carbon-X system: an AS-5 siren-and-strobe alarm paired with a DSD-1 dry contact station. Mount it inside or outside the grow room, and it sounds off and flashes when CO2 climbs past the alarm level set on the CDA-1 controller. 85 dB siren with red strobe (120 flashes per minute) Connects to the CDA-1 Devices port over RJ12; follows sensor channel AL-1, AL-2 or both for redundancy Extra dry contact output rated 30 VDC / 250 VAC, 6 A Input: 100–240 VAC, 50/60 Hz Plug and play Working environment: 32–122°F, up to 90% RH In the box: DSD-1 dry contact station, AS-5 alarm, 16 ft and 4 ft RJ12 cables, RJ12 T-splitter.
$138.00 $131.10
-
TrolMaster TrolMaster Carbon-X AS-2 CO2 Alarm Station 2 with LCD and Color LED
The TrolMaster AS-2 is a Carbon-X CO2 alarm station with a color-coded LED and an LCD that shows the CO2 level in ppm. Mount it outside the grow room so the crew can check the room before walking in: green means CO2 is under 800 ppm, yellow means supplemental CO2 is running, and blinking red with the siren means CO2 is above the alarm level set on the Carbon-X controller. Color-coded LED: green under 800 ppm, yellow at 800 ppm and up, blinking red at the alarm level LCD readout of current CO2 ppm Siren: 100 dB Follows Carbon-X sensor channel AL-1, AL-2 or both for redundancy Needs an SPH-1 splitter hub for supplemental power (sold separately) Plug-and-go RJ12 connection to the Carbon-X CDA-1 controller Working environment: 32–122°F, up to 90% RH In the box: AS-2 alarm station, 16 ft RJ12 cable.
$230.00 $218.50
-
TrolMaster TrolMaster Carbon-X AS-4 CO2 Alarm Station with LCD, Blue Light
The TrolMaster AS-4 is a Carbon-X CO2 alarm station with a blue LED indicator and an LCD that shows the CO2 level in ppm. Mount it outside the grow room: when CO2 goes past the alarm level set on the Carbon-X controller, the blue light blinks and the siren sounds. Blue LED alarm indicator LCD readout of current CO2 ppm Siren: 100 dB Follows Carbon-X sensor channel AL-1, AL-2 or both for redundancy Needs an SPH-1 splitter hub for supplemental power (sold separately) Plug-and-go RJ12 connection to the Carbon-X CDA-1 controller Working environment: 32–122°F, up to 90% RH In the box: AS-4 alarm station, 16 ft RJ12 cable.
$230.00 $218.50
-
TrolMaster TrolMaster Carbon-X AS-3 CO2 Alarm Station with LCD, Amber Light
The TrolMaster AS-3 is a Carbon-X CO2 alarm station with an amber LED indicator and an LCD that shows the CO2 level in ppm. Mount it outside the grow room: when CO2 goes past the alarm level set on the Carbon-X controller, the amber light blinks and the siren sounds. Amber LED alarm indicator LCD readout of current CO2 ppm Siren: 100 dB Follows Carbon-X sensor channel AL-1, AL-2 or both for redundancy Needs an SPH-1 splitter hub for supplemental power (sold separately) Plug-and-go RJ12 connection to the Carbon-X CDA-1 controller Working environment: 32–122°F, up to 90% RH In the box: AS-3 alarm station, 16 ft RJ12 cable.
$230.00 $218.50
-
TrolMaster TrolMaster Carbon-X MBS-K30 CO2 Sensor, 0-30,000 ppm NDIR
The TrolMaster MBS-K30 is the CO2 sensor for the Carbon-X CO2 alarm system. Its NDIR sensor reads up to 30,000 ppm from a self-aspirating enclosure, and a built-in LCD shows the live ppm level right at the sensor. Run one or two per monitored room, depending on what your local code calls for. NDIR sensor, 0–30,000 ppm range Accuracy: ±300 ppm ±3% of reading Built-in LCD shows the current CO2 ppm For the Carbon-X CDA-1 CO2 alarm controller; plug-and-play RJ12 connection Needs an SPH-1 splitter hub for supplemental power (sold separately) Input: 14 VDC, 0.04 A max Sensor life expectancy: over 15 years Working environment: 32–122°F, up to 90% RH In the box: MBS-K30 sensor, 16 ft RJ12 cable, T-splitter.
$405.00 $384.75
-
TrolMaster TrolMaster Carbon-X CDA-1 CO2 Alarm System Controller
The TrolMaster Carbon-X CDA-1 is the main controller for a CO2 alarm system. It monitors CO2 in up to 13 zones, with high-level alerts adjustable up to 30,000 ppm and low-level alerts at 5,000 ppm, both adjustable to match local rules for supplemental CO2. When levels climb it can run exhaust fans and dampers, shut the main CO2 valve and signal your facility's fire/alarm panel, and it sends high-CO2 notifications through the TrolMaster app. CO2 monitoring for up to 13 zones or rooms (13 sensors per alarm channel) Up to 40 controlled outputs for ventilation fans, dampers and main CO2 valves Automatic CO2 shut-off with the facility's main CO2 solenoid wired through a control module Can signal the fire department through the facility's fire/alarm panel Remote monitoring and high-CO2 alerts in the TrolMaster app Backlit 128 x 128 LCD with button control; micro-SD for saving and copying settings CO2 sensors and audio-visual alarm stations sold separately; TrolMaster calls for an alarm station in each monitored room Input: 100–240 VAC, 50/60 Hz · not compatible with HughesNet or Viasat satellite internet In the box: CDA-1 controller, two 16 ft RJ12 cables, 12 V power adapter.
$578.00 $549.10
-
TrolMaster TrolMaster SCC-4 Mini Controller Cabinet, 100-277V
The TrolMaster SCC-4 is a compact cabinet that houses a TrolMaster main controller and up to six DSR-1 25 A relay stations in one protected enclosure. Built-in RJ12 splitter boards and mounting plates keep the wiring and modules organized, clean and dry, and an intelligent fan handles cabinet cooling. Holds a Green-X (GCS-1), Hydro-X (HCS-1), Aqua-X (NFS-1), Carbon-X (CDA-1) or Tent-X (TCS-1) controller Room for up to 6 DSR-1 relay device stations (sold separately) Built-in RJ12 splitter boards: 6 + 6 + 5 ports Input: 100–277 V, 50/60 Hz; 60 A max output current IP53 rated; intelligent fan speed control Expandable, customizable layout with clean cable management Working environment: 32–104°F, up to 90% RH In the box: SCC-4 cabinet, GCS-1 power cable, HCS-1/NFS-1/CDA-1/TCS-1 power cable, 3 mounting back plates, three 1.6 ft RJ12 cables.
$461.00 $437.95
-
TrolMaster TrolMaster TC-2 2K Grow Room Camera, Wi-Fi and Ethernet
The TrolMaster TC-2 is a 2K camera for keeping an eye on your grow room around the clock. Watch low-latency live video in the free TrolMaster TM+ Pro app next to your controller data, talk through its two-way audio, and record locally to a microSD card. It connects over dual-band Wi-Fi or wired Ethernet and doesn't rely on bright IR lights that disturb the room. 2K 6 MP image sensor; H.264 video 24/7 live view in the TM+ Pro app with low latency Dual-band 2.4 / 5 GHz Wi-Fi or RJ45 wired Ethernet MicroSD slot for local recording, up to 256 GB Two-way audio; no bright IR lights IP65 water resistant; wall or ceiling mounting Listed for HCS-1, HCS-2, HCS-3, TCS-1 and GCS-1 systems Power: 100–240 V adapter, 12 V 1 A In the box: TC-2 camera, power adapter, water-resistant cap set, wall-mount screw set.
$104.00 $98.80
-
TrolMaster TrolMaster ECS-500 500ft RJ12 Cable Roll with 100 Connectors
Most TrolMaster sensors and control modules connect with standard RJ12 cable, and the ECS-500 lets you make your own runs when the stock cables are the wrong length. You get a 500 ft roll of flat white RJ12 cable plus 100 connectors and 100 boots, enough to wire out a big room exactly to length. 500 ft roll of flat, white RJ12 cable Includes 100 RJ12 connectors and 100 connector protectors Make custom-length cables for TrolMaster sensors and device stations Working environment: 32–122°F, up to 90% RH In the box: 500 ft RJ12 cable roll, 100 RJ12 connectors, 100 connector protectors.
$143.00 $135.85
-
TrolMaster TrolMaster MC-1 Multifunction RJ12/RJ45 Crimper and Cable Tester
The TrolMaster MC-1 is an all-in-one modular crimp tool for building and checking your own controller cables. It crimps, cuts and strips RJ45, RJ11, RJ12 and RJ22 plugs, and its built-in tester checks patch cables and installed runs for continuity, opens, shorts and miswires before you hang them. Crimps, cuts and strips RJ45, RJ11, RJ12 and RJ22 plugs Built-in cable tester for patch cables and installed wiring Checks continuity, opens, shorts and miswires Ratchet action In the box: one MC-1 multifunction crimper.
$60.00 $57.00
-
TrolMaster TrolMaster BM-1 Weatherproof Box for TS-1/2, HS-1 and ARS-1 Stations
The TrolMaster BM-1 is a weatherproof housing for TrolMaster's TS-1 and TS-2 thermostat stations, HS-1 humidistat station and ARS-1 AC remote station. It shields the station from dripping water and low-pressure spray, which helps in wash-down areas and damp grow rooms. Fits TS-1, TS-2, HS-1 and ARS-1 stations Protects against dripping water and low-pressure sprayed water Working environment: 32–122°F, up to 90% RH In the box: one BM-1 weatherproof box.
$22.00 $20.90
-
TrolMaster TrolMaster TSB-1 Sensor Bracket for MBS-Pro and MBS-K30, 2-Pack
The TrolMaster TSB-1 is a wall bracket made for the MBS-Pro and MBS-K30 sensors. Its curved edges hug the sensor and lock it in place, keeping it at a fixed spot on the wall and away from hanging cords and clutter. Brackets join together with a mortise-and-tenon fit. Wall mount for MBS-Pro and MBS-K30 sensors Curved-edge design locks the sensor in place Multiple holders join with a mortise-and-tenon connection 2 holders per pack Working environment: 32–122°F, up to 90% RH In the box: 2 sensor holders.
$18.00 $17.10
-
TrolMaster TrolMaster TSS-2 16ft Touch Spot Extension Cable for WD-1
The TrolMaster TSS-2 is a 16 ft extension cable for WD-1 water detectors. Use it to put more distance between a WD-1 module and its touch spot, or between two touch spots, so you can reach the far corner of the room or the next bench over. 16 ft extension for WD-1 touch spot sensors Male to female ends Plug and play Working environment: 32–122°F, up to 90% RH In the box: one TSS-2 16 ft extension cable.
$19.00 $18.05
-
TrolMaster TrolMaster TSS-1 Touch Spot Set for WD-1 Water Detector
The TrolMaster TSS-1 adds another sensing point to a WD-1 water detector. The set includes an extra touch spot and a T-splitter, so one WD-1 module can watch several places at once for spills, floods or irrigation runoff. Adds a touch spot to a WD-1 water detector module Monitor multiple spots from one WD-1 For leak, flood and runoff detection Plug and play Working environment: 32–122°F, up to 90% RH In the box: touch spot water sensor, T-splitter, holder.
$37.00 $35.15
-
TrolMaster TrolMaster ECW-1 RJ12 Waterproof Inline Coupler, IP68
The TrolMaster ECW-1 joins two RJ12 cables end to end with a sealed, IP68-rated coupler, so a splice in a wet grow room stays dry and the link between your controller, sensors and devices stays solid. Straight-through inline coupler for two RJ12 cables IP68 waterproof sealed connectors Extends controller, sensor and device station connections In the box: one ECW-1 RJ12 waterproof inline coupler.
$22.00 $20.90
-
TrolMaster TrolMaster ECS-12 4-Pin Waterproof Splitter Cable
The TrolMaster ECS-12 is an IP65 4-pin splitter for chaining multiple ThinkGrow LEDs or LMA-T adapters together in a ThinkGrow lighting system. Its waterproof, dustproof build and locking ends hold up in damp, dusty grow rooms, and it makes a handy spare to keep a lighting chain running. IP65 waterproof and dustproof 4-pin splitter 2 male and 2 female ends with locking connectors Connects TrolMaster lighting adapters to ThinkGrow LEDs, or multiple fixtures to the SPH-1 Working environment: 32–122°F, up to 90% RH In the box: ECS-12 splitter cable, 2 vent plugs.
$20.00 $19.00
-
TrolMaster TrolMaster ECS-10 RJ12 25ft Coiled Communication Cable
The TrolMaster ECS-10 is a coiled RJ12 communication cable for fixtures that move. Run it to lights on a lifting system or to mobile vertical racks, and the coil stretches and retracts so the connection stays put while the fixtures travel. RJ12 coiled cable: 15 ft coil plus 5 ft straight lead on each end (25 ft total) For fixtures on light lifters or movable vertical racking Temperature resistance: 32–122°F; humidity up to 90% In the box: one ECS-10 RJ12 coiled communication cable.
$27.00 $25.65
-
TrolMaster TrolMaster ECS-8 32ft Extension Cable for IR Emitter
The TrolMaster ECS-8 is a 32 ft extension cable for the IR emitter that comes with the ARS-1 AC Remote Station and the Beta-1 Day/Night Remote Controller. It lets you mount the station where you want it and still put the emitter right in front of the AC unit's receiver. 32 ft extension for the IR emitter For the ARS-1 AC Remote Station and Beta-1 controller Male to female ends; plug and play Working environment: 32–122°F, up to 90% RH In the box: one ECS-8 32 ft extension cable.
$24.00 $22.80
You have seen 48 out of 122 products