The AMP-2 module connects the Aqua-x to a set of precision pH / EC & temperature probes to constantly measure the pH / EC & temperature of the water being sampled. The AMP-2 works with the TrolMaster PCT-1&2 and the PPH-1&2 probes. Once connected to the Aqua-x, the AMP-2 will display the sensor data on the Aqua-x and on the APP. The minimum and maximum “limits” can be set on the Aqua-x providing 24/7 notification of pH / EC or temperatures that are out of limits.
The SPH-1 Splitter Hub from TrolMaster makes installation of our controllers as easy as plugging in a phone cable. The SPH-1 hub uses a single RJ12 cable input jack, and provides (8) individual RJ12 output jacks that can be connected to various TrolMaster sensors, adapters and device modules. Using the SPH-1 allows for a "clean" installation and eliminates the need for daisy-chain Y-splitters to be used to interconnect multiple modules or sensors.The SPH-1 is also a powered hub, meaning that it will boost the signals passing through the SPH-1 allowing more modules, sensors and light adapters to be connected to the TrolMaster controllers. By using the SPH-1, an almost unlimited number of LED / HID lights can be controlled using a single TrolMaster controller. The SPH-1 comes complete with the SPH-1 hub, a 16 foot RJ12 cable and the 12vdc power supply.The SPH-1 can be located in a central location with a single RJ12 cable connecting it to the main controller. From the SPH-1 hub, the individual RJ12 jacks can be connected to each of the sensors, device modules, or lighting adapters.
The TrolMaster DSH-1 Humidity control / device modules allow user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated at 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload.
TrolMaster modules and sensors all come complete with a RJ12 16ft cable, Y-splitter and RJ12 4 ft cable to connect to the Hydro-x. When connecting modules that are farther apart, you can use the Extension cable set ECS-1. The ECS-1 comes complete with another 16ft cable, Y-splitter and 4 ft cable.
Vivosun GrowHub E25 Controller, as an expansion port for GrowHub E42/E42A supporting SGS Devices, is WiFi Controllable and easy to install and use.
Flexible Combinations: The GrowHub Controller E25 supports SGS devices like the AeroLight, AeroZesh, and AeroWave E, allowing you to freely combine devices in your grow tent; w/ RJ45 cables, you can connect multiple AeroLights.
App Controlled: The GrowHub Controller is WiFi-enabled to allow remote monitoring and control of equipment w/ the Vivosun App from anywhere, anytime - from your couch to abroad; Expand the controller’s capabilities w/ grow recipes and other powerful settings.
Plug and Play: To install the E25, you only need to insert it to the Type C port of your SGS devices and connect it to the WiFi; Small size and compact design w/ one button for WiFi configuration and a clear status indicator light, you’ll get more flexibility and ease of use.
Smart Grow: w/ a smart auto-mode and professional grow recipes settings through the App, you can set your lights, circulation fans, and duct fans based on the different growth stages, and maximum yield w/ minimal effort.
Expansion to GrowHub E42/E42A: GrowHub E25 can either schedule independently or share the same schedule w/ GrowHub E42./E42A; You can add E25 and E42/E42A to the same garden on Vivosun App, and use E25 as an expansion port for E42/E42A.
A splitter hub that connects same-type grow devices to UIS™ controllers to follow shared programming.
Distributes one set of smart programming from a single port to up to four UIS devices to follow together.
Compatible with digital smart controllers like CONTROLLER 69, CONTROLLER 69 PRO, and more.
Connects growing equipment like inline fans, humidifiers, and LED grow lights under shared programming.
Capable of linking UIS devices and additional hubs together in up to three tiers in a multi-level array.
GrowHub A10 Controller, Smart Plug, 15A 1800W, Remote Control, Compatible with Vivosun App for Grow Tent
Unify Your Equipment: Operate devices individually or integrate them with the GrowHub A10 for seamless control; Simplify gardening tasks, achieve precise management, and maintain a stable environment for optimal plant growth (Compatible with wired devices featuring mechanical switches or basic on/off functionality)
Effortless Automation: Automate control seamlessly with app-based scheduling; Easily manage devices; It operates locally even when offline, keeping your growing process uninterrupted
Safe Growing: Made with fire-resistant material, this ETL-certified outlet quickly reacts to overheating, overload, or malfunctions, ensuring reliability
Access Anytime, Anywhere: The GrowHub Controller is WiFi-enabled, allowing you to control and monitor your equipment from virtually anywhere via the app; Unlock advanced features like Grow Recipes and customizable settings
Wide Compatibility: Featuring a 15A outlet supporting up to 1800W, this compact smart plug works with most devices; Expand and customize your Vivosun Smart Grow System (SGS) effortlessly
With 2K QHD resolution, this smart camera captures vivid details of your plants, letting you admire them up close. The time-lapse function unveils their growth journey in stunning videos you can easily share with friends. Day/night mode ensures 24/7 clear recording, with plant-safe night vision designed to protect their natural cycles. Use the Vivosun app to check on your plants wherever you are.
2K Crystal Clear: The 2K 4MP QHD ultra-clear lens captures vivid details, letting you observe your plants up close; Specially adjusted for grow setups, it offers a true-to-life view
See Growth Unfold in Time-Lapse: Use the time-lapse function (MicroSD card required) to capture your plant’s journey from seedling to bloom; Share these stunning videos with friends on social media
Non-Stop Recording: Day/night mode provides 24/7 clear recording, ensuring you never miss a moment of your plants’ growth; Insert a microSD card (not included) up to 512 GB to save continuous footage and replay it
Monitor Anytime, Anywhere: Control the camera through the Vivosun app and monitor your plants wherever you are
Multiple Mounting Options: Easily install this camera using magnetic mounts, screws, pole clamps, or by placing it on flat surfaces; Compatible with grow tents, VGrow systems, and other setups
Use the GrowHub Outlet Controller A22 to monitor and control your devices anywhere, anytime with the Vivosun app. Automate daily tasks with smart timers and grow recipes, all hands-free. WiFi down? Don’t worry, the device can work locally to keep your growing process running smoothly.
Unify Your Equipment: Operate devices individually or integrate them with the GrowHub A22 for seamless control; Simplify gardening tasks, achieve precise management, and maintain a stable growing environment for optimal plant health (Compatible with any wired device featuring a mechanical switch or basic on/off functionality)
Effortless Automation: Automate control effortlessly based on scheduling and temperature/humidity triggers from the app; It operates locally even when offline, keeping your growing process uninterrupted
Safe Growing: The external sensor accurately monitors temperature and humidity, while the ETL-certified outlet quickly adjusts if issues arise (e.g., overheating); Real-time alerts notify you when conditions fall outside your desired range, ensuring a safe environment
Access Anywhere, Anytime: The GrowHub Controller is WiFi-enabled, allowing you to control and monitor your equipment from virtually anywhere via the app; Unlock advanced features like Grow Recipes and powerful customization options
Wide Compatibility: With two outlets (TOTAL 15 A) and two USB ports (Each 5V 1A), this smart plug supports most growing devices, making your setup smarter and more efficient; Expand and customize your Vivosun Smart Grow System (SGS) effortlessly
Smarter Vision, Smarter Grow: Grow camera designed for indoor tents to monitor, record, and timelapse plant growth from anywhere. With AI to assist with tracking growth and potential health issues of hemp plants.
Ultra-Sharp 4K Imaging: Monitor, record, and replay your grow from anywhere using our app. Capture stunning 4K stills and timelapses (MicroSD not inc.) and view during lights off with plant-safe 940nm IR night vision.
Health and Growth Insights: Detects signs of plant stress and environmental changes, helping you adjust watering, nutrients, and care routines. Provides tailored insights while tracking plant stages, growth rates, and bud development over time.
Controller Integration: Syncs with our AI environmental controllers to unlock vision-driven automations, from dimming grow lights when heat stress is detected to adjusting devices when the tent door opens.
Designed for Grow Tents: Weatherproof IP67-rated design with adjustable clamps that can secure onto any grow tent pole. Featuring dual 360° rotating joints that enable precise positioning and an optimal view.
Powerful 1000W heater with smart AI control and a multi-configuration design to optimize the climate for all plant growth stages.
Temperature and VPD programming powered by adaptive AI that dynamically adjusts heat output to maintain your target environment.
Utilizes individual PTC plates with PWM control to deliver 10 true heat levels or intake fresh air for balanced climate control.
Dual ports enable you to duct directly into your grow space or create a closed-loop setup for optimal heating efficiency (ducting not included).
Connects with UIS controllers for WiFi app connectivity—unlocking advanced automations, data tracking, alerts, and grow guides.
Intelligent Climate Control for Every Growth Stage
Experience precision-engineered climate management with this powerful 1000W AI-driven heater. Designed to optimize growth through every stage, it automatically adjusts temperature, airflow, and VPD to maintain your target environment. Individual PTC plates with PWM control deliver 10 true heat levels or fresh air intake for balanced conditions, while dual duct ports support both open- and closed-loop setups for versatile integration. This product is ETL-certified with safety features including tip-over alarms, flame-retardant materials, and overheat protection with auto-restart it delivers performance you can trust. Designed exclusively for indoor use. Operate only in controlled environments with humidity between 30%–65% RH, including incoming airflow. Do not use outdoors or in high-humidity areas. Do not use with humidifiers in closed-loop setups. Mist may enter intake ducting and damage the heater. Plug heaters only into a grounded wall outlet with surge protection. Never use extension cords or power strips, as this may cause overheating or melting. Do not share the outlet with other devices.
Adaptive AI for Predictive Climate Management
Powered by adaptive AI, the system continuously learns from your environment to maintain precise temperature and VPD targets. Its intelligent algorithm dynamically adjusts output to match your programmed ranges, responding instantly to environmental fluctuations, throttling in precise percentages to deliver unmatched accuracy and control. When connected through UIS controllers, growers can access real-time data tracking, alerts, and advanced automation to maintain the perfect climate 24/7.
Dual Airflow Modes and Flexible Ducting Options
Engineered for versatility, this unit offers both heat and fresh air intake outputs to achieve balanced environmental control. Dual duct ports allow easy setup in open-loop configurations for fresh air exchange or closed-loop systems for maximum heat efficiency. Whether you’re optimizing for optimal heat retention or airflow renewal, this modular design provides flexible, precise control over your grow space. Ducting not included.
A sensor designed specifically for AC Infinity AI Controllers to monitor the presence or absence of water.
Allows AI controller to provide leak detection, alerts, and advance controls via the AC Infinity app, triggering water devices as needed.
Versatile mounting options with both secure suction and powerful magnetic attachments for maximum adaptability.
IP68-rated to guarantee the sensor is safeguarded against continuous immersion in water up to 3 meters in depth.
This sensor is engineered to enhance various settings, from aquariums to industrial water tanks, providing a versatile solution for monitoring and managing water levels.
Product Description
This water sensor is designed specifically for AC Infinity AI Controllers to help monitor the presence or absence of water. It achieves this by sending alerts and activating automated devices to maintain ideal conditions. With an IP68 rating, the sensor can be submerged up to 3 meters in depth for a continuous period. Designed for diverse applications to improve various settings, from aquariums to grow spaces, this device provides a versatile approach to water management.
Intelligent Pairing
When used with our AI controllers and Wi-Fi app, this sensor detects when water levels are low based on its mounted height, allowing your controller to activate devices that help replenish your water supply. It can also deliver real-time leak detection and enable advanced control options with instant alerts. This ensures your space gets the right amount of water at the right time.
Advanced Tracking
This water sensor will play a crucial role in both plant cultivation and aquarium maintenance, providing vital information that helps track optimal growth conditions and healthy aquatic environments. Consistent tracking will enable your controller to automatically adjust watering schedules based on real-time data, leading to healthier growth, increased yields, and stable environments.
A cable to connect UIS controllers to compatible devices such as fans, lights, outlets, and humidifiers.
Fully compatible with all UIS devices including CLOUDRAY, CLOUDLINE, IONFRAME, CLOUDFORGE, and more.
Fully compatible with UIS controllers including CONTROLLER 69 PRO, CONTROLLER 69 PRO+ and CONTROLLER 63.
Fully compatible with CONTROLLER AI+, supporting all device identification and advance functions.
Compact design engineered to fit with UIS™ connectors and ports and ensure a firm, secure connection.
Product Description
An extension cable designed to connect AC Infinity controllers to smart devices like fans, grow lights, humidifiers, and heaters for use in grow applications. This maximizes the utility of your smart controller by extending its reach to compatible devices while providing intelligent programming like climate triggers, timers, and scheduling. Its compact design is engineered to fit in UIS connectors and ports to ensure a tight, secure connection. Fully compatible with Controller AI+, enabling it to control device-exclusive functions like clip fan oscillation and supports unique device identification.
Applications
This cable is used to extend the connection between your existing AC Infinity controller and UIS devices, compatible with the following:
Controller AI+ – AI-Powered Controller
Controller 69 PRO/PRO+ – Grow Tent Controllers
CLOUDFORGE Series – Humidifiers
CLOUDLINE Series – Inline Duct Fans
CLOUDLIFT Series – Floor Wall Fans
CLOUDRAY Series – Clip-on Circulation Fans
CLOUDWAY Series – Whole House Fans
AIRLIFT Series – Shutter Exhaust Fans
AIRBLAZE Series – Fireplace Blower Fans
AIRTITAN Series – Crawl Space & Basement Fans
IONFRAME Series – Commercial LED Grow Lights
IONBOARD Series – LED Grow Light Boards
IONBEAM Series – LED Supplemental Lighting
TERRAFORM Series – Air Conditioners
THERMOFORGE Series – Heaters
A smart sensor probe designed to detect temperature and humidity conditions for AC Infinity universal controllers. Using a Swiss-made thermal-alloy head, the climate sensor uses type 316 SAE steel that can adapt to rapidly changing climate conditions. This allows it to provide pinpoint accurate temperature and humidity readings and enables you to quickly adjust your fan to your cooling or heating needs. The corded probe has an IP-44 rating, able to withstand humid conditions by resisting splashing water and dust. Comes in 20 feet in length for spot detection coverage applications such as grow tents, HVAC ductwork, tool sheds, and AV component closets.
Autopilot 24 hr Day & Night Cooling/Heating ThermostatThe APCET2 is a temperature controller that can be used as a cooling OR a heating device. It automatically powers the device connected based on the selected day and night set points. The user can choose to have different day and night temperature set points that are automatically detected by the built-in photocell. The knobs make it easy to adjust the settings. We added a Memory-lock feature which will lock the set points into memory for consistent performance, even if the knobs are accidently bumped.
Controls heating or cooling equipment with both day/night set points
Includes 20' remote precision temperature sensor
Temperature control differential +/- 3F
Built-in photocell
120v, 15 amps max
