Milwaukee Instruments

 Summary The Milwaukee MW101-SOIL PRO pH meter has won fans around the world with its reliable, fast and simple operation as well as its toughness and accuracy. The Milwaukee PRO pH Meter is preferred by people testing samples in direct soil or with slurries that cause other pH meters to fail while taking direct readings in Hydroponics, Horticulture and farming applications. The Milwaukee PRO pH meter offers: Speed The MW101-SOIL delivers fast results to ±0.02 pH accuracy with two point calibration. Toughness The rugged meter is designed to take knocks. Paired with low maintenance, field grade MA920B/1 open junction, gel filled electrode, the MW101-SOIL is ideal for everyone from educators to horticulture professionals and growers. Design features Fast easy to read results with large digital LCD readout ±0.02 pH accuracy & 0.01 pH resolution Lightweight and portable Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize 3’ probe cables for extra flexibility Manual two-point calibration for increased accuracy Gel-filled, open junction, field grade pH electrode for low maintenance and high performance Auto shut off and low power demand for approx. 300 hours of continuous use (battery included) Use and Care  pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction. Sensing bulb The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes. Reference junction The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH probe will no longer function. You can extend the life of your pH electrode in the following ways. Cleaning and Storage All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maintenance Kit code PH-Main at checkout time!  This will be needed to help clean and condition the pH electrode before use! Storage The pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged. Store the pH probe in storage solution MA9015.  Only use tap water short-term if MA9015 is not immediately available and NEVER store in distilled Water (DI) or Reverse Osmosis (RO) water. This will damage the sensitivity of the probe. The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage. Cleaning Residue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution MA9016 for about 20 minutes. Calibration The pH sensing bulbs become less sensitive over time so make sure that you are calibrating reguarly to keep your PRO pH meter accurate. Also, calibrate after cleaning or a long period of storage.

Read more less

 Summary The digital Milwaukee PRO+ pH Meter is preferred by people testing samples that cause other pH testers and meters to fail from brewers, wine makers to hydroponic growers and farmers. When combined and used with the Wine Electrode MA919B/1, it is a cost effective, reliable portable meter for pH wine applications. The Milwaukee PRO pH meter offers: Accuracy People choose the digital PRO+ pH Meter to improve the accuracy of their pH testing program. With two point calibration, the meter can be quickly calibrated to a higher accuracy compared with one point calibration. The MW102 meter is accuracy to ±0.02 pH. 5x more accurate than some alternative meters. The meter comes with both a pH probe and temperature probe allowing the meter to automatically adjust the pH reading for the effect of temperature. The temperature probe can also be used as a very accurate thermometer. Toughness The rugged, digital pH meter is built to take knocks. Low Maintenance The PRO+ pH meter comes with the Milwaukee SE220 pH probe. The SE220 is Milwaukee's top selling lab grade electrode for a reason. Designed to be both low maintenance (gel filled) and able to withstand more challenging samples (double junction). The SE220 is ideal for use in beer making, winemaking and hydroponics.  The PRO MW102 when combined and used with the pH Wine Electrode MA919B/1, is a reliable portable meter for measuring the pH of wines  SEE MW102 WINE KIT.  The MA919B/1 has a special PTFE reference that prevents clogging and staining, can also slide up to drain the reference electrolyte for refilling, is refillable with MA9011 electrolyte and is glass and designed specific high electrolyte flow. Design features Fast easy to read results with large digital LCD readout Lightweight and portable Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize Automatic Temp. Compensation (ATC) Automatic two-point calibration for increased accuracy Extreme accuracy to ±0.02 pH and extended range (-2.00 pH to 16.00 pH)  Low maintenance, high performance gel-filled, double junction lab grade pH electrode included Rugged stainless temperature probe 3’ probe cables for extra flexibility Auto shut off and low power demand Approx. 300 hours of continuous use Care and Use  pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction. Sensing bulb The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes. Reference junction The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH electrode will no longer function. You can extend the life of your pH electrode in the following ways. Cleaning and Storage All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maintenance Kit code PH-Main at checkout time!  This will be needed to help clean and condition the pH electrode before use! Storage The pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged. Store the pH probe in storage solution MA9015.  Only use tap water short-term if MA9015 is not immediately available and NEVER store in distilled Water (DI) or Reverse Osmosis (RO) water. This will damage the sensitivity of the probe. The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage. Cleaning Residue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution MA9016  for about 20 minutes. Calibration The pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO Plus pH meter accurate. Also, calibrate after cleaning or a long period of storage. Thank you for considering Milwaukee to help you take your results to the next level.

Read more less

Probe calibration is a simple procedure for optimal performance and should be done any time your readings become suspect. Calibration should be performed at least once a month.MA9007 is a lab grade pH 7.01 buffer solution certified to meet the standard to an accuracy of ±0.01 pH removing the inaccuracies involved with mixing buffers.Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode. DESIGN FEATURES pH 7.01 Calibration Buffer Solution (230 mL) Fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings Sealed against light with air tight, tamper proof cap Ideal for fast accurate calibration Simply open, pour into a beaker or container and insert the tester or electrode to start the calibration process.

Read more less

Probe calibration is a simple procedure for optimal performance and should be done any time your readings become suspect. Calibration should be performed at least once a month.MA9004 is a lab grade pH 4.01 buffer solution certified to meet the standard to an accuracy of ±0.01 pH removing the inaccuracies involved with mixing buffers.Milwaukee solutions are designed to help you achieve reliable and repeatable pH measurements while extending the life of your electrode. DESIGN FEATURES pH 4.01 Calibration Buffer Solution (230 mL) Fundamental for the correct use of electrodes and for obtaining the most accurate and reproducible readings Sealed against light with air tight, tamper proof cap Ideal for fast calibration Simply open, pour into a beaker or container and insert the tester or electrode to start the calibration process.

Read more less

The Milwaukee Waterproof pH55 PRO pH/Temp. Tester is one of our most accurate cost effective, well rounded, rugged and reliable testers in the market featuring dual level LCD readouts, easily replaceable probe and extended pH ranges to meet almost any application. It's simple 1 or 2 point automatic calibration is simple-to-use and offers TWO sets of memorized buffers to select.  Ideal for use in aquariums, hydroponics, horticulture, education, pools, beer and many other applications.The Milwaukee Waterproof pH55 pH/temp. tester offers: ACCURACY The Waterproof pH55 PRO tester is accurate to ±0.1 pH & +/-0.5°C (+/-1°F) and is easy to read.With easy 2 point automatic calibration, this pH tester is quickly calibrated to an accuracy of much more expensive meters.  Simple design and rugged, it brings great value for any application.  Why guess at your readings using litmus paper when you can have guaranteed accurate, digital LCD results. LONG LIFE The tester comes with a replaceable pH probe with a double junction probe designed for longer life. FAST RESPONSE The probe is double junction allowing quick, accurate pH readings and respose times. WATERPROOF CONSTRUCTION No more worries about dropping your tester while measuring. The pH55 PRO is waterproof to IP65. LIGHT WEIGHT At just 3.5 ounces, the pH55 PRO is easy to handle at up to half the weight of other testers. EASE-OF-USE A large Dual Level LCD screen with easy-to-read graphic symbols, makes it easy while calibrating or reading your measurement.  This takes the  takes the guess work out of litmus paper. DESIGN FEATURES Fast easy to read results with large digital LCD readout. Extreme pH accuracy to  ±0.1 pH with an extended pH range (-2.0 pH to 16.0 pH). Resolution to 0.1 pH. Lightweight and portable. Easy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the reading. Is fully compensated for temperature (ATC). Simple Automatic one or two-point calibration. 2 Sets of pre-memorized buffers. Gel-filled, double junction pH electrode for low maintenance and high performance. Over 300 hours of battery life (batteries included). Fully waterproof to IP65. Replaceable pH electrode Mi56P. CARE AND USE All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time!  This will be needed to help clean and condition the pH electrode before use!Here are our top four tips. 1. Always store with the cap full of buffer or storage solution MA9015 not water. 2. Clean your Tester regularly by soaking in cleaning solution MA9016. 3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor. 4. Gently stir the Tester in the sample for a faster result. SPECIFICATIONS pH Range: -2.0 to 16.0 pH Temperature Range: -5.0 to 60.0°C (23 to 140°F) pH Resolution: 0.1 pH pH Accuracy: ±0.1 pH Temperature Accuracy: ±0.5°C (±1°F) Typical EMC Deviation: ±0.1 Typical EMC Temperature Deviation: ±0.3°C (±0.6°F) Temperature Compensation: Automatic from -5 to 60°C (23 to 140°F) Calibration Automatic: 1 or 2 points with 2 sets of pre-memorized buffers (pH 4.01, 7.01, 10.01) or (pH 4.01, 6.86, 9.18) Probe: Replaceable double junction for extended life (Mi56P) Environment: -5 to 50°C / 23 to 122°F; max RH 100% Battery Type: 4 x 1.5V; IEC LR44, A76 (included) Battery Life: Approx. 300 hours of use Auto-off: after 8 minutes on non-use Dimensions: 7.9 inches × 1.5 inches (diameter) Weight: 3.5 ounces (99.22 g)

Read more less

The Milwaukee EC60 PRO Conductivity Tester is designed for hydroponic and other growers to help you make sure that your plants have the ideal amount of nutrient avaiable. Keep EC in your target range to help your achieve better results.DESIGN FEATURESMeasures conductivity and TDS with automatic temperature compensation.Ideal range for hydroponic and other growers (0.00 to 20.00 mS/cm).Units in mS/cm or ppt easily convertable to ppm.Factory calibrated with the ability to recalibrate if needed.Replaceable electrode.Fully waterproof to IP65.Approximately 100 hours of use (4 x 1.5V batteries included).CARE AND USEMAINTENANCEEC electrodes can develop nutrient build up over time. To miminize build up, always rinse the probe in fresh tap water after every use.CONVERTING EC TO TDSThe Milwaukee EC60 PRO Conductivity Tester, like all conductivity meters, provides a measure of electrically charged ions in a solution and is an absolute measure of conductivity.In Hydroponics, EC is often converted to TDS in parts per million (ppm). Different scales include the 500 scale, 650 scale and the 700 scale. However, true PPM can only be determined through chemical analysis.Your mS/cm reading can be approximately converted to TDS (ppm) as shown in the examples below.2.00 mS/cm = 2000 uS/cm = 1000 ppm on .50 factor scale2.00 mS/cm = 2000 uS/cm = 1400 ppm on the 442 scale or .70 factor scaleSPECIFICATIONSEC Range: 0.00-20.00 mS/cmTDS Range: 0.00-10.00 pptTemp Range: 0.0 to 60.0°C / 32.0 to 140.0°FEC Resolution: 0.01 mS/cmTDS Resolution: 0.01 pptTemp Resolution: 0.1°C / 0.1°FEC Accuracy: 2% Full ScaleTDS Accuracy: 2% Full ScaleTemp Accuracy: ±0.5°C / ±1°FEC Typical EMC Deviation: 2% Full ScaleTDS Typical EMC Deviation: 2% Full Scale TempTypical EMC Deviation Temperature: ±0.5°C / ±1°FCalibration: Automatic, 1 pointTemperature Compensation: Automatic, with β=0.0 to 2.4%/°CProbe: Mi59P (replaceable)Environment: 0 to 50°C / 32 to 122°F; max RH 100%Battery Type: 4 x 1.5V; IEC LR44, A76 (included)Battery Life: Approx. 100 hours of useAuto-off: After 8 minutes of non-useDimensions: 7.9 × dia 1.5 inchesWeight: 3.5 ounces

Read more less

The MC720 kit includes the MC122 controller and the MP810 dosing pump to automatically monitor and fine-tune pH levels. Just set your pH parameters and let the Milwaukee pH Controller and pump do the rest.The Milwaukee PRO pH controller kit is preferred by people looking to dial in their testing program when they have an ongoing need to maintain levels. Common uses are nutrient tanks and aquariums.The Milwaukee PRO pH controller and pump offers:ACCURACYThe Milwaukee PRO pH controller offers an accuracy to ±0.2 pH with two point manual calibration.AUTOMATIONThe controller provides a control range of 5.5 to 9.5 pH with alarms that activate when readings are higher or lower than set point.COMPATIBLE DOSING PUMPThe Milwaukee MP810 dosing pump (designed specifically for use with the MC122) is included in the kit.EASY INSTALLATIONThe MC720 pH controller and pump kit comes with a complete mounting kit including a probe holder.DESIGN FEATURESFast easy to read current results with large digital LCD readout Accurate to ±0.2 pH (0.0 pH to 14.0 pH) with the user selectable high/low set points Simple two-point calibration for increased accuracy with manual trimmers for easy adjustment Gel-filled, double junction lab grade pH electrode for low maintenance and high performance 6.5 feet probe cables for extra flexibility when testing 12 VDC power supply Pump provides a maximum pressure of 1.5 bar or more than 50 feet of head pressure with a 0.16 GPM dosing flow.USE AND CARE pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.SENSING BULBThe glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.REFERENCE JUNCTIONThe reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH probe will no longer function.You can extend the life of your pH electrode in the following ways.STORAGEThe pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.Storing in pH probe storage solution or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe.The best way to store the probe is with the probe's cap filled with storage solution or calibiration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.CLEANINGResidue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution.CALIBRATIONThe pH sensing bulbs become less sensitive over time so make sure that you are calibrating reguarly to keep your PRO pH controller accurate. Also, calibrate after cleaning or a long period of storage.MC122 SPECIFICATIONSRange: 0.0 - 14.0 pH Resolution: 0.1 pH Accuracy: ±0.2 pH Set point: 5.5 to 9.5 pH Calibration: Manual 2 points Alarm Active when reading is higher or lower than set point Dosing Contact: 1 power plug for CO2 dosing pH electrode: MA911B/2 (included) Environment: 0 to 50°C / 32 to 122°F; max RH 95% Power Supply: 12 VDC adapter (included) Power Drivers: 115 VAC, 2A, 60Hz or 230 VAC, 1A, 50Hz Mounting kit (Included) Dimensions: 5.9 x 3.2 x 1.35 inches Weight: 6.3 ounces (meter only)MP810 SPECIFICATIONSMax. Flow: 0.6 L/h Max. Pressure: 1.5 bar Squeeze tubing: Santoprene Ext. Tube connection: 6 mm Power supply: 240 VAC, 50-60 Hz or 110 VAC, 60 Hz Power consumption: 0.42 W Dimensions: 100 x 106 x 108 mm Weight: 17.6 oz.

Read more less

The Milwaukee digital BRIX refractometer is temperature compensated with a 0 to 85 percent BRIX range and +/- 0.2 percent accuracy. It is easy to use with simple two button operation and fast with a response time under 2 seconds. Maintenance is a breeze also with an easy-to-clean sealed flint glass prism and stainless steel well.DESIGN FEATURESFast, accurate results with digital dual level LCD readout. Easy measurement with just 2-3 drops of sample needed and results less than 2 seconds. Simple one-point calibration using distilled or deionized water. Easy to clean, stainless steel sample well with unit rated to IP65 as "dust tight" and protected against water jets. Battery percent level indicator with automatic shut-off (batteries included). Ideal for winemakers, brewers, fruit and vegetable growers, maple syrup producers, and food producers. The measurement technique and temperature compensation employ methodology recommended in the ICUMSA Methods Book (Internationally recognized body for Sugar Analysis).

Read more less

The Milwaukee pH600AQ compact pen tester is specifically designed to help maintain aquariums and aquaculture. Keeping the proper pH improves results for aquarium fish and quality in a range of fish raised in aqulculture.Use digital accuracy to keep pH in your target range for better results.WHAT PEOPLE ARE SAYING"Accurate results and calibrated right out of the box.""Must have for any aquarium owner.""Good value. Easy to use. Consistent."DESIGN FEATURESFast, accurate results with digital LCD readoutEasy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilizeSimple one-point calibration with an easy-to-use trimmer located on the back of the pH tester to protect from accidental splashesCap to protect the pH sensor and keep it wet when stored uprightLow power demand for extended battery life (batteries included)USE AND CAREAll pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time!  This will be needed to help clean and condition the pH electrode before use!Here are our top four tips. 1. Always store upright with the cap full of buffer or storage solution MA9015 not water.2. Clean your pH Pen Tester regularly by soaking in cleaning solution MA9016.3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.4. Gently stir the Pen in the sample for a faster result. Thank you for considering Milwaukee to help you take your results to the next level.SPECIFICATIONSpH range: 0.0 to 14.0 pHResolution: 0.1 pHAccuracy: +/- 0.1 pHTypical EMC Deviation: +/- 0.2 pHCalibration: Manual, 1 PointEnvironment: 32 F to 122 F, 95% RHApproximate dimensions: 6 x 1.2 x 0.95 inchesWeight: 3 ounceBattery Life: 700 hoursWarranty: 1 year

Read more less