Milwaukee EC40 EC/TDS Nutrient Meter

Description

The Milwaukee EC/TDS Nutrient Meter is designed for Hydroponics, horticulture and agriculture to help you make sure that your vegetables and plants are receiving the right amount of nutrient to promote healthy growth with low to zero product waste. Keep EC/TDS in your target range to help your achieve better results.
DESIGN FEATURES
Measures conductivity (EC) and total dissolved solids (TDS) with automatic temperature compensation.
Ideal range for Hydroponics (0.2 to 4 mS/cm | 2 to 40 CF | 140 to 2800 ppm 0.7 scale | 100 to 2000 ppm 0.5 scale).
Units directly in mS/cm/CF/PPM (no conversions required). 
Factory calibrated no continious calibration required.
High accuracy.
Automatic Temperature Compensation (ATC).
Auto on/off feature.
Blue LED display.
Graphite electrode in ABC + PC body.
Battery level indicators.
Battery life up to 3 years with approx. 10 measurements per day.
3 X 1.5V AA (batteries included).
CARE AND USE
MAINTENANCE
EC/TDS electrodes can develop nutrient build up over time. To miminize build up, always rinse the probe in fresh tap or DI water after every use.
CONVERTING EC TO TDS
The Milwaukee EC40 meter, like all conductivity meters, provides a measure of electrically charged ions in a solution and is an absolute measure of conductivity.EC is often converted to TDS in parts per million (ppm). Different scales include the 500 scale, 650 scale and the 700 scale. However, the EC40 has all the readings direct EC/TDS/CF.  Your uS/cm reading can be approximately converted to TDS (ppm) as shown in the examples below.1 uS/cm = 0.5 ppm on a .5 factor scale 
1 uS/cm = 0.7 ppm on a .70 factor scale (442)
SPECIFICATIONS
Range: 0.2 to 4 mS/cm
Range: 2 to 40 CF
Range: 140 to 2800 ppm 0.7 scale
Range: 100 to 2000 ppm 0.5 scale
Resolution: 0.1 mS/cm
Resolution: 1 CF
Resolution: 70 ppm (factor: 700 ppm = 1 mS/cm)
Resolution: 50 ppm (factor: 500 ppm = 1 mS/cm)
Accuracy: ±4% of reading, ± 1 resolution point
Calibration: Factory calibration (no additional calibration required)
Probe: Graphite electrode in ABC + PC body
Temperature Compensation: Automatic from 5 to 50°C (41 to 122°F)
Battery Type: 3 x 1.5V AA (included)
Battery Life: Approx. 3 years @ 10 tests per day
Measurement Display: 20 blue LEDs bar
Environment: 0 to 50°C / 32 to 122°F; max RH 95%
Dimensions: 17" inches length (420 mm) / 30 mm diameter (1.2")
Weight: 9 ounces (255 g)
Casing Protection: IP67, floating

Milwaukee EC40 EC/TDS Nutrient Meter

Product form

The Milwaukee EC/TDS Nutrient Meter is designed for Hydroponics, horticulture and agriculture to help you make sure that your vegetables... Read more

Free pickup in our shop(s)

2 in stock In stock

$95.00

    • Guaranteed secure & safe checkout.

      shop pay
    • Free pickup at our Webster & Milford stores
    • 30-day returns on unopened items

    Description

    The Milwaukee EC/TDS Nutrient Meter is designed for Hydroponics, horticulture and agriculture to help you make sure that your vegetables and plants are receiving the right amount of nutrient to promote healthy growth with low to zero product waste. Keep EC/TDS in your target range to help your achieve better results.
    DESIGN FEATURES
    Measures conductivity (EC) and total dissolved solids (TDS) with automatic temperature compensation.
    Ideal range for Hydroponics (0.2 to 4 mS/cm | 2 to 40 CF | 140 to 2800 ppm 0.7 scale | 100 to 2000 ppm 0.5 scale).
    Units directly in mS/cm/CF/PPM (no conversions required). 
    Factory calibrated no continious calibration required.
    High accuracy.
    Automatic Temperature Compensation (ATC).
    Auto on/off feature.
    Blue LED display.
    Graphite electrode in ABC + PC body.
    Battery level indicators.
    Battery life up to 3 years with approx. 10 measurements per day.
    3 X 1.5V AA (batteries included).
    CARE AND USE
    MAINTENANCE
    EC/TDS electrodes can develop nutrient build up over time. To miminize build up, always rinse the probe in fresh tap or DI water after every use.
    CONVERTING EC TO TDS
    The Milwaukee EC40 meter, like all conductivity meters, provides a measure of electrically charged ions in a solution and is an absolute measure of conductivity.EC is often converted to TDS in parts per million (ppm). Different scales include the 500 scale, 650 scale and the 700 scale. However, the EC40 has all the readings direct EC/TDS/CF.  Your uS/cm reading can be approximately converted to TDS (ppm) as shown in the examples below.1 uS/cm = 0.5 ppm on a .5 factor scale 
    1 uS/cm = 0.7 ppm on a .70 factor scale (442)
    SPECIFICATIONS
    Range: 0.2 to 4 mS/cm
    Range: 2 to 40 CF
    Range: 140 to 2800 ppm 0.7 scale
    Range: 100 to 2000 ppm 0.5 scale
    Resolution: 0.1 mS/cm
    Resolution: 1 CF
    Resolution: 70 ppm (factor: 700 ppm = 1 mS/cm)
    Resolution: 50 ppm (factor: 500 ppm = 1 mS/cm)
    Accuracy: ±4% of reading, ± 1 resolution point
    Calibration: Factory calibration (no additional calibration required)
    Probe: Graphite electrode in ABC + PC body
    Temperature Compensation: Automatic from 5 to 50°C (41 to 122°F)
    Battery Type: 3 x 1.5V AA (included)
    Battery Life: Approx. 3 years @ 10 tests per day
    Measurement Display: 20 blue LEDs bar
    Environment: 0 to 50°C / 32 to 122°F; max RH 95%
    Dimensions: 17" inches length (420 mm) / 30 mm diameter (1.2")
    Weight: 9 ounces (255 g)
    Casing Protection: IP67, floating

    Returns & Delivery

    How fast will my order ship?

    We're a small family-owned shop, not Amazon. Most orders arrive within 7–14 days, and some items ship direct from the manufacturer. Need it today? Pick it up at Webster or Milford.

    Can I pick this up in store?

    Yes — order online and collect at Webster or Milford with no shipping charge. Both stores are open seven days a week.

    What if I need to return it?

    Most new, unopened items can come back within 30 days of delivery for a full refund. If the mistake was ours, we cover the return shipping.

    Do you handle bulk and commercial orders?

    We ship pallets of Pro-Mix, Bio365 and Athena nationwide. Call 508-461-5850 or ask us for facility pricing.

    Recently viewed products

      © 2026 Matt’s Hydroponics, Powered by Shopify