GrowPros
-
GrowPros GrowPros Pure Station Pro
The Pure Station Pro is a full-size laminar flow hood built for medium to large labs, with room for at least two technicians at the stainless steel work surface. A 47.6 in HEPA filter feeds a 48.8 x 19.3 x 21.7 in work area, and the LED work lights and UV sterilization light can run independently. Five fan speeds and a digital touch display make it easy to dial in clean airflow. GrowPros lists it at 220V / 50Hz, so please confirm your power supply with us before ordering.
$3,650.00
-
GrowPros GrowPros DT Convertible Double Tier Used as Single Tier (per sq ft)
This is GrowPros' double-tier rolling rack frame set up with only the lower tier in use, so you can run single-tier today and add the upper level later without replacing the rack. It includes trays, starts at 8 ft long and grows in 4 ft increments, and runs on separately purchased floor tracks. Stainless construction matches the rest of the GrowPros rack line. Priced per square foot of rack: set the quantity to your total rack area in square feet (a 4 x 8 ft rack is 32 sq ft).
$38.00
-
GrowPros GrowPros Griffin 50W Green LED Bar 4ft
This 50W Griffin green bar adds 520nm green to a Griffin modular bar fixture on its own dimming channel. It uses the same push-lock power-and-data connector, Unistrut mounting and 120-277V input as the other Griffin bars, so it slots into an existing rail layout. Up to 32 bars chain on 120V (75 on 277V).
$130.00
-
GrowPros GrowPros The Ram Rod Single Tier Rolling Bench with V-Track (per sq ft)
This single-tier rolling bench rides on heavy-duty rollers along a floor-mounted V-track, so tables move smoothly wall to wall and aisles open only where you need them. Stainless steel legs carry continuous extra-thick ABS trays, rated up to 26 lb per sq ft and 2,000 lb per bench. Benches are built to order 4 ft wide in lengths from 8 to 80 ft. Priced per square foot of bench: set the quantity to your total bench area in square feet (a 4 x 8 ft bench is 32 sq ft).
$20.00
-
GrowPros GrowPros The Chariot Single Tier Rolling Bench (per sq ft)
This single-tier rolling bench uses a hand-crank wheel to slide each table up to 18 in side to side, turning fixed aisles into growing space. The stainless steel and aluminum frame resists rust in wet rooms, and it comes with ABS tray inserts and trellis supports. Benches are built to order in 4 ft or 5 ft widths and lengths from 8 ft up, and each bench handles up to 2,000 lb. Priced per square foot of bench: set the quantity to your total bench area in square feet (a 4 x 8 ft bench is 32 sq ft).
$16.00
-
GrowPros GrowPros The Ark Multi Tier Rolling Rack (per sq ft)
This multi-tier rolling rack stacks two growing levels on one tracked base, roughly doubling canopy in the same footprint compared with a single-tier bench. It is built from stainless steel with sloped ABS trays for easy drainage, and tier heights adjust for different crops and stages. Racks are made to order in 4 ft or 5 ft widths and 8 to 80 ft lengths, with optional catwalks and air circulation for the upper level. Priced per square foot of rack footprint: set the quantity to your total rack area in square feet (a 4 x 8 ft rack is 32 sq ft).
$30.00
-
GrowPros GrowPros The Ark Third Tier Add-On (per sq ft)
This add-on turns a GrowPros double-tier rolling rack into a three-level system, adding another full growing tier on the same tracked footprint. Each level is rated for up to 3,000 lb, and the stainless frame and ABS trays match the base rack. It is quoted per square foot to match your rack's width and length: set the quantity to your rack area in square feet (a 4 x 8 ft rack is 32 sq ft).
$25.00
-
GrowPros GrowPros Griffin 50W Ultra Violet LED Bar 4ft
This 50W Griffin UV bar adds a UVA channel (385nm) to a Griffin modular bar fixture, dimmed separately from your main bars. It shares the push-lock power-and-data connector, Unistrut mounting and 120-277V input of the Griffin line. Up to 32 bars chain on 120V (75 on 277V).
$150.00
-
GrowPros GrowPros Griffin 150W Full Spectrum LED Bar 4ft
The Griffin full-spectrum bar is a modular LED bar you can mount on Unistrut and combine with other Griffin bars to build a custom fixture. Each bar is switchable to 100W, 120W or 150W, blends 437.5nm blue, full-spectrum white and 660nm deep red, and reaches about 3.1 umol/J. A single push-lock connection carries both power and 0-10V data on 120-277V, and up to 8 bars chain on 120V (16 on 240V, 18 on 277V).
$120.00
-
GrowPros GrowPros RJ-45 Data Cable 50ft (WP)
This 50 ft waterproof RJ45 data cable carries the GrowPros WP RJ45 dimming signal on longer runs, such as from a wall-mounted controller out to the first row of lights. The screw-sealed connectors keep moisture off the data pins.
$35.00
-
GrowPros GrowPros Autoclave
The PURE SUB is a 24 L stainless steel steam autoclave for sterilizing bulk substrate, lab tools and culture equipment in mushroom and tissue-culture work. Electric heating and saturated steam do the work, with an LED display that shows status and an automatic shut-off with an alarm when the cycle ends. A spin-knob lid makes loading and unloading quick.
$700.00
-
GrowPros GrowPros Air Circulation Tube Roll
This full-length roll of 4 in air sock is the ducting for the GrowPros Quetzalcoatl air circulation system, for laying out long runs on multi-tier racks. The permeable polyester spreads air evenly in 360 degrees, resists dust build-up and removes for washing. Reinforced elastic ends make for quick, secure connections.
$325.00
-
GrowPros GrowPros Air Circulation System 12in / 4 Lines
This Quetzalcoatl air circulation system steps up to a 12 in blower with a four-outlet manifold, feeding 4 in fabric air socks across four tiers or rows of a vertical rack. An 8 ft tube is included, and the ACS controller sets fan speed. Its fire-resistant, UV-protective housing and washable antimicrobial parts suit commercial multi-tier rooms.
$875.00
-
GrowPros GrowPros RJ-45 Data Cable 15ft (WP)
This 15 ft waterproof RJ45 data cable extends the GrowPros WP RJ45 dimming link between a controller adaptor, splitters and lights. The screw-sealed connectors keep moisture off the data pins in wet grow rooms.
$15.00
-
GrowPros GrowPros UCL Storage Rack
This rolling storage rack keeps under-canopy lights organized and protected during room turnovers, cleaning and resets. A heavy-duty steel frame with 16 pairs of arms holds 90+ bars, and swivel plus fixed casters let one person roll a full load out of the room. The open base adds space for cords, stands and other accessories.
$295.00
-
GrowPros GrowPros Clone Light Extension Cable 2ft
This extension cord links two GrowPros clone bars so one can be powered from the next. Its total length is 27 in (2 ft 3 in), handy for spanning the gap between bars on a shelf or rack. Check the daisy-chain limit before linking a long run.
$15.00
-
GrowPros GrowPros Controller Adaptor (WP, 2-in-1 RJ45)
This white controller adaptor plugs into the RJ45 dimming output of a GrowPros controller and splits it into two waterproof push-lock RJ45 ports. It converts the controller signal into four analog 0-10V dimming channels and sends the same command to both outputs, so one controller port can drive two runs of lights. Gold-plated pins and sealed screw-cap ports protect the connection in humid rooms, and typically one adaptor is needed per controller or room.
$15.00
-
GrowPros GrowPros UCL Interconnect Cable 3ft (Push Lock)
This 3 ft push-lock interconnect cable carries both power and data from one GrowPros under-canopy bar to the next, or across the gap between benches. Its IP65 waterproof connectors handle the wet conditions under the canopy. Stay within the daisy-chain limit for your voltage when linking rows.
$20.00
-
GrowPros GrowPros 240V UCL Power Cord (Push Lock)
This 15 ft, 240V power cord feeds the first light in a row of GrowPros under-canopy bars and carries the dimming data line in the same run. It has a standard NEMA 6-15P plug and a push-lock fixture connector with IP65 waterproofing, rated up to 10 amps. It fits the push-lock generation of GrowPros UCLs made from September 2025 on.
$30.00
-
GrowPros GrowPros UCL Cradle for Bench Bridge
This cradle is the trough-shaped holder that clips onto the GrowPros bench bridge and carries an under-canopy light bar. It is about 12 in long and 3.75 in wide with a 1 in lip, and it slides along the bridge so bars can be spaced where you want them. Add extra cradles to hang more bars from one bridge.
$15.00
-
GrowPros GrowPros RJ-12 Data Cable
This RJ12 to RJ12 data cable connects a lighting controller to a fixture, or links fixtures together, for 0-10V dimming and daisy-chain control. It uses molded 6P6C male plugs on both ends and runs 15 ft. It is a plug-and-play spare for any GrowPros setup that uses RJ12 data.
$9.90
-
GrowPros GrowPros Single External Dimmer (RJ12)
This single external dimmer is a small knob-style box that dims a GrowPros light through its RJ12 data port, giving you manual control without a full controller. It also works as a backup if a fixture's built-in dial stops working. The manufacturer lists it for the HM series (HM240, HM480, HM660, HM960) and it is also used to run the ACS air circulation system.
$30.00
-
GrowPros GrowPros GPS Lighting Controller (White)
The GrowPros lighting controller is a touchscreen unit that dims GrowPros top lights and under-canopy lights by channel, with four channel readouts plus on-screen temperature, humidity and timer settings. It connects to fixtures over RJ12 data, and data splitters let one controller run a whole room of under-canopy lights. It suits growers who want schedules and channel control from one wall-mounted screen.
$165.00
-
GrowPros GrowPros Griffin 50W Far Red LED Bar 4ft
This 50W Griffin far-red bar adds 730nm far red to a Griffin bar setup, letting you supplement and fine-tune the spectrum on its own dimming channel. It shares the same push-lock power-and-data connection, Unistrut mounting and 120-277V input as the rest of the Griffin line. Up to 32 bars chain on 120V (75 on 277V).
$130.00
You have seen 24 out of 79 products