GrowPros
-
GrowPros GrowPros Pure Station Compact
The Pure Station Compact is a laminar flow hood for small and medium labs, giving a clean, filtered work area for mushroom culture, testing and tissue culture. A HEPA filter feeds a 24.2 x 19.5 x 19.7 in stainless work area, with five fan speeds, an LED work light and a UV sterilization light you can run separately or together. A digital display with a soft keypad and a large on/off switch keep it simple to run. GrowPros lists it at 220V / 50Hz, so please confirm your power supply with us before ordering.
$1,950.00
-
GrowPros GrowPros Bud Throne Harvest Bucket Seat
This padded harvest seat lid turns a standard bucket into a sturdy stool for long work sessions, and doubles as a clean cover or trash-bin top. It fits most buckets from 3.5 to 7 gallons and holds up to 300 lb. A wood base, foam top and vinyl coating make it comfortable and easy to wipe down; it is not intended for food storage.
$35.00
-
GrowPros GrowPros 20in Pegasus Wall Fan
The Pegasus is a 20 in high-velocity drum fan that moves up to 6000 CFM across three speeds, with a sealed motor that stands up to wet, humid grow rooms. Orbital gearing sweeps the airflow a full 360 degrees and the head tilts, and it can sit on its V-stand with non-skid feet or mount to the wall with the included bracket. An all-metal, powder-coated body, carry handle and 6 ft fused cord with cord wrap round it out.
$75.00
-
GrowPros GrowPros Air Circulation System 10in / 3 Lines
This Quetzalcoatl air circulation system uses a 10 in blower with a three-outlet manifold to feed 4 in fabric air socks through three canopy levels or rows, evening out airflow and reducing microclimates. An 8 ft tube is included, and fan speed is controlled from the ACS controller. The fire-resistant, UV-protective housing has washable antimicrobial parts. Photos show the blower and the 2-line manifold; this kit has 3 lines.
$825.00
-
GrowPros GrowPros Air Circulation System 10in / 2 Lines
The Quetzalcoatl air circulation system pushes gentle, even airflow through 4 in fabric air socks laid in each canopy level, cutting down hot spots and stagnant air on multi-tier racks. This version pairs a 10 in blower with a two-outlet manifold, and an 8 ft tube is included. Its rounded, fire-resistant, UV-protective housing has washable antimicrobial parts, and fan speed is set from the ACS controller.
$775.00
-
GrowPros GrowPros Catwalk Side Track 8ft (Pair)
These 8 ft side tracks (sold as a pair) are the stainless steel rails that support GrowPros catwalk decks along multi-tier racks. Anti-dislodge tabs lock them into the rack uprights and hold the decks in place, and each rail is rated to 800 lb.
$160.00
-
GrowPros GrowPros Catwalk Side Track 4ft (Pair)
These 4 ft side tracks (sold as a pair) are the stainless steel rails that carry GrowPros catwalk decks between rack uprights. Anti-dislodge tabs anchor the rails in the uprights and hold the decking in place, and the rails can be repositioned as racks change. Each rail is rated to 800 lb.
$90.00
-
GrowPros GrowPros Catwalk Platform 4ft
This 4 ft catwalk deck creates a walkable platform between GrowPros multi-tier racks for working the upper canopy. Each marine-grade aluminum deck measures 20.5 x 47.2 in and weighs just 12.8 lb, yet supports up to 400 lb. Decks set into the side tracks without tools, so one person can install them.
$250.00
-
GrowPros GrowPros Catwalk Ladder
This stainless steel tube ladder hooks onto the GrowPros catwalk to give safe access to the upper tiers of multi-tier rolling racks. Ladders are offered from 3 to 10 rungs to reach deck heights of 30 to 120 in above the floor, and three-position hook plates set a comfortable climbing angle. It is light enough to move from aisle to aisle.
$250.00
-
GrowPros GrowPros Bench Tray Glue 300 mL
This 300 mL adhesive is used to bond and seal GrowPros bench tray sections during tray installation. Keep a tube on hand when assembling or repairing tray runs on rolling benches.
$20.00
-
GrowPros GrowPros White Bench Tray 4x8 (Tray Only)
This white 4x8 bench tray (tray only) is molded from food-safe, UV-resistant ABS with built-in drainage channels that keep water from pooling. It fits GrowPros rolling benches and standard tray stands, and works with flood-and-drain, drip and ebb-and-flow setups. The crack-resistant material holds plants, media and solution without warping.
$160.00
-
GrowPros GrowPros Rolling Bench 2ft Legs (4x8)
These are 2 ft legs for a 4x8 GrowPros single-tier rolling bench, for replacing or adding leg sets on an existing bench. They match the bench's stainless steel frame.
$8.00
-
GrowPros GrowPros Rolling Bench Floor Track 7ft 10in
This stainless steel floor track section guides GrowPros tracked rolling benches and multi-tier racks so they glide in a straight line under full load. Each section is 7 ft 10 in long and mounts to the floor, and sections join end to end for any room length. It is designed to fit GrowPros sliding racks.
$20.00
-
GrowPros GrowPros Rolling Bench Dolly Slide Handle
This stainless steel slide handle gives staff a safe, comfortable grip for pushing GrowPros V-track rolling benches along their track. Rounded corners prevent snags and scrapes, and the rust-resistant build stands up to humid rooms. It is sized to move fully loaded benches.
$40.00
-
GrowPros GrowPros Clone Light Power Cable
This 4 ft (48 in) power cord powers the first GrowPros clone bar in a run from a wall outlet. It is the same cord included with the clone lights, so it works as a spare or replacement.
$15.00
-
GrowPros GrowPros Clone Light 4ft (Pair)
These slim 4 ft LED clone bars are sold as a pair for cuttings, seedlings and early veg on multi-shelf racks. A switch selects 18W or 30W, and each bar blends 4000K white with 460nm blue and 660nm red diodes to keep young plants compact. Double-ended connectors daisy-chain bars end to end, and the aluminum heat sink and easy-clean PC cover suit humid propagation rooms.
$70.00 $60.00
-
GrowPros GrowPros Emergency Green Exit Sign
This UL-listed exit sign combo pairs green 6 in EXIT lettering with two adjustable green lamp heads for plant-friendly egress lighting during the dark cycle. A NiCad battery provides over 90 minutes of emergency power, and dual 120V/277V input cords cover most facilities. The ABS housing mounts on a standard J-box from the wall or top, and the arrow covers pop out to show direction.
$135.00 $95.00
-
GrowPros GrowPros Emergency Green Light 4ft (BB)
This is the battery-backup version of the GrowPros 4 ft green emergency light, so it keeps lighting the room in a power outage as well as during the dark cycle. It uses the same 40W, 522.5-525nm green LED with about 3355 lumens, a polycarbonate lens, and IP66 and IK10 ratings. It is hardwired directly to your power supply, with no plug included.
$235.00 $170.00
-
GrowPros GrowPros Emergency Green Light 4ft
This 4 ft green LED work light lets crews see during the dark cycle using a narrow 522.5-525nm green that plants barely respond to. The 40W fixture puts out about 3355 lumens, replacing up to 120W of fluorescent tubes, with a diffused polycarbonate lens and a built-in driver. It is IP66 dust and water rated and IK10 impact rated for wash-down grow rooms.
$135.00 $95.00
-
GrowPros GrowPros UCL0 to UCL12 Twist Lock Adaptor (5 Pin to 8 Pin)
This twist-lock adaptor connects first-generation 5-pin GrowPros under-canopy lights to 8-pin twist-lock cords and interconnects. It lets early bars stay in service alongside later ones without rewiring the row.
$16.50
-
GrowPros GrowPros Twist Lock to Push Lock Adaptor
This adaptor joins an older twist-lock GrowPros under-canopy cord or interconnect to a newer push-lock light, letting existing cords run current bars. It comes in a black version for Model 1/2 lights and a green version for Model 3/4 lights.
$16.50
-
GrowPros GrowPros Push Lock to Twist Lock Adaptor
This adaptor joins a newer push-lock GrowPros under-canopy cord or interconnect to an older twist-lock under-canopy light, so mixed generations can share one row. It comes in a black version for Model 1/2 lights and a green version for Model 3/4 lights.
$16.50
-
GrowPros GrowPros RJ-45 4 Way Splitter (WP)
This 4-way splitter takes one waterproof RJ45 data line and splits it into three, so one controller output can reach several rows of GrowPros lights. Gold-plated contacts help keep the dimming signal clean, and it is built specifically for GrowPros push-lock data links on dual-channel top lights and Model 3/4 under-canopy bars.
$15.00
-
GrowPros GrowPros Under Canopy Bench Bridge
The bench bridge spans a rolling bench or rack and holds under-canopy lights above the tray, so trays can be cleaned without moving the lights. It extends to fit benches 4 to 5 ft wide (37 to 63 in) and adjusts from about 9 to 19 in tall, with sliding holders to place each bar exactly. The metal frame works with GrowPros bars and most other popular under-canopy lights.
$55.00
You have seen 48 out of 79 products