Snoop's Premium Nutrients Start A 1ltr 4-0-0 (Soil, Hydro Run To Waste - Hydro Recirculating)

Description

START
A&B SNOOP’S PREMIUM NUTRIENTS Research has shown that it’s bad practice to use grow nutrients at a reduced dilution rate when fertilizing clones and young plants. While the ppm will be in the desired range, grow nutrients will not meet the plants’ need for more anions than cations. SNOOP’S PREMIUM START A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the start phase increasing your young plants and clones ability to develop rapid shoot development. Providing your plants with proper nutrition assists them in reaching their full potential. Now you can give your crops a PREMIUM Start. START A&B THE SCIENCE At the start of the plants life it needs and will up-take more Nitrogen (NO− 3). NO− 3 is a negative ion (anion). To take in an anion a plant has to release an electron (−). This electron when released into water is adding a negative load creating a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. To keep the pH in the substrate at optimum level for the start phase another type of nitrogen is used, which is referred to as ammonium (NH+ 4). This is a positive ion and the first of all ions to be taken by the plant. For further information, please read growing science. If a plant takes in NH+ 4 a plant has to release a proton (+). This proton when released into water will add a positive load creating a hydrogen (H+) particle. This H+ particle will bring the pH down in the root zone/substrate. A plant needs more NO− 3 in its early stages and therefore releases more OH− particles than at later stages, so it needs the correct level of NH+ 4 to release the correct level of H+ particles to control the internal pH regulation of the substrate as well as the pH you choose to feed with from your feed tank. This ensures the pH is kept in a range that allows the elements to be taken in by the plant. DIRECTIONS Fill the feed tank with water. Shake bottle well before use. Add 10ml of Start A per gallon of water (2.5ml per litre) and mix well. Then add 10ml of Start B per gallon of water (2.5ml per litre) and mix well. This will give an approximate EC of 1.4 (980ppm). Adjust pH as required. – Always use an equal amount of Start A and Start B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific. AVAILABLE IN: 1L, 5L, 10L & 20L. VARIANTS: Hydro,coco,soil

Snoop's Premium Nutrients Start A 1ltr 4-0-0 (Soil, Hydro Run To Waste - Hydro Recirculating)

Product form

START A&B SNOOP’S PREMIUM NUTRIENTS Research has shown that it’s bad practice to use grow nutrients at a reduced dilution... Read more

In stock

In stock · ships from one of our warehouses

Not on our Webster shelf right now. We can ship it to your door, or to our Webster store for you to pick up.

Why?

Our Webster store stocks over 10,000 products. The rest of our catalog ships from our warehouses around the country, so you can get it without waiting on a restock.

$12.49

    • Guaranteed secure & safe checkout.

      shop pay
    • 30-day returns on unopened items

    Description

    START
    A&B SNOOP’S PREMIUM NUTRIENTS Research has shown that it’s bad practice to use grow nutrients at a reduced dilution rate when fertilizing clones and young plants. While the ppm will be in the desired range, grow nutrients will not meet the plants’ need for more anions than cations. SNOOP’S PREMIUM START A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the start phase increasing your young plants and clones ability to develop rapid shoot development. Providing your plants with proper nutrition assists them in reaching their full potential. Now you can give your crops a PREMIUM Start. START A&B THE SCIENCE At the start of the plants life it needs and will up-take more Nitrogen (NO− 3). NO− 3 is a negative ion (anion). To take in an anion a plant has to release an electron (−). This electron when released into water is adding a negative load creating a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. To keep the pH in the substrate at optimum level for the start phase another type of nitrogen is used, which is referred to as ammonium (NH+ 4). This is a positive ion and the first of all ions to be taken by the plant. For further information, please read growing science. If a plant takes in NH+ 4 a plant has to release a proton (+). This proton when released into water will add a positive load creating a hydrogen (H+) particle. This H+ particle will bring the pH down in the root zone/substrate. A plant needs more NO− 3 in its early stages and therefore releases more OH− particles than at later stages, so it needs the correct level of NH+ 4 to release the correct level of H+ particles to control the internal pH regulation of the substrate as well as the pH you choose to feed with from your feed tank. This ensures the pH is kept in a range that allows the elements to be taken in by the plant. DIRECTIONS Fill the feed tank with water. Shake bottle well before use. Add 10ml of Start A per gallon of water (2.5ml per litre) and mix well. Then add 10ml of Start B per gallon of water (2.5ml per litre) and mix well. This will give an approximate EC of 1.4 (980ppm). Adjust pH as required. – Always use an equal amount of Start A and Start B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific. AVAILABLE IN: 1L, 5L, 10L & 20L. VARIANTS: Hydro,coco,soil

    Returns & Delivery

    How fast will my order ship?

    Orders leave our Webster store within 1 to 7 business days (Monday through Friday), using the shipping option you choose at checkout. Some items ship from our warehouses around the country. Need it today? Order online and pick it up at our Webster store.

    Can I pick this up in store?

    Yes — order online and pick it up at our Webster store with no shipping charge. Webster is open seven days a week.

    What if I need to return it?

    Most new, unopened items can come back within 30 days of delivery for a full refund. If the mistake was ours, we cover the return shipping.

    Do you handle bulk and commercial orders?

    We ship pallets of Pro-Mix, Bio365 and Athena nationwide. Call 508-296-0470 or ask us for facility pricing.

    Shop related collections

    Recently viewed products