A 3.5 mil, high strength aluminum foil coated with an aggressive acrylic adhesive system. The foil conforms well to both fibrous and sheet metal ducts, providing an excellent vapor seal. The malleable foil also conforms well around corners and to irregular surfaces. Can be used under all weather conditions; designed for maximum adhesion over clean, dry surfaces, resists water vapor, odor and smoke transmission. For application ease, the adhesive is protected until the liner is removed. Measures 3 inches x 33 yards.
An 11 mil Heavy-duty silver duct tape with high tack and easy tear. Ideal for bundling, sealing and holding applications. High performance strength and adhesion. Measures 2 inches x 50 yards.
No screwdriver needed! These stainless steel clamps work well on irrigation hoses and small ducting by preventing water and air leaks. These clamps are also a great option for underwater use as they will never rust or corrode.
No screwdriver needed! These stainless steel clamps work well on irrigation hoses and small ducting by preventing water and air leaks. These clamps are also a great option for underwater use as they will never rust or corrode.
The flange is used to connect the Can-Filter to the ducting or Can-Fan this is for airflow out of the ventilated area. These spun steel flanges come with a foam rubber seal and 6 hex drive self-tapping screws forming a perfect seal with Can-Filter products. Flanges range in size from 4 in to 20 in depending on your specific needs.
The Hurricane 16 in Oscillating Wall Mount Fan has 3 speeds (high, medium and low) controlled by a dial or pull cords. Ideal for homes, greenhouses, garages, workshops and other areas with limited floor space. It has 90oscillation or can be locked in a non-oscillating position. Also features a multi-position tilt. A powder-coated steel grill is clean and durable. The fan blade is made of chemical-resistant polypropylene.
Classic series 16 in oscillating wall mount fan. This fan has 3 speed settings controlled by a turn switch. The fan has a 90 oscillation motion. There are two convenient pull cords for speed and oscillation control. It has a durable steel neck support with a 60 in power cord.
Phat Filters are packed full with the very best carbon on the market and we have the independent lab test numbers to prove it.How do we know? Simple math.Carbon Quantity x Carbon Quality = Filter CapacityQUANTITY: When we say Phat Filter carbon beds are 2" thick, they are in fact, 2" thick. The same is true when it comes to Phat Filter bed length size; the size we claim is in fact the actual size, not a rounded-up dimension to make it seem bigger. So it stands to reason that we can obviously pack more carbon into our fi lters than some others can claim.QUALITY: Phat Filter's quality is also backed up by math and science too. ADsorption Yield (adsorption with a is the key. It tells you how good the carbon is. So how do you find the Adsorption Yield?Its an easy equation:Dry Apparent Density x Butane Number = Adsorption yieldA high adsorption yield number equals a greater capacity to adsorb odors, which in turn means the filter is of higher quality and will sustain a longer life-span. This is critical when choosing a quality carbon filter like a Phat Filter.So compare the numbers and you'll see for yourself that Phat Filters are easily the best deal in the marketplace today! Phat Filters numbers don't lie.
Extend the effective life of your Active Air carbon filter with a corresponding Active Air pre-filter. These pre-filters block larger particulate matter such as dust and dirt from clogging the working surface of your filter. This keeps your carbon filter operating at top efficiency for much longer. When the pre-filter becomes visibly dirty and discolored after several weeks, simply replace it.Check our large collection and find the size that matches your carbon filter. Active Air pre-filters are individually shrink-wrapped with UPC code for easy display and sale. Stock up on pre-filters to ensure you've always got the cleanest, most efficient Active Air filter in your grow room.
Made from strong galvanized steel construction, these Y connectors allow you to split ventilation into multiple areas with one fan. Using a Y-connector gives you double the possibilities you can split a length of ducting into two separate runs of ducting going to your preferred areas. Available in a wide range of sizes to fit your situation.
Made of galvanized steel. Crimped on both ends for easy installation, these couplers provide the perfect solution when you need to join two runs of ducting to make a single, longer run. Use duct clamps (we recommend our Active Air stainless steel clamps, such as item code ACC10) or zip ties to secure the ducting to the coupler. (OBSOLETE)
Ideal for homes, greenhouses, garages, workshops and other areas with limited floor space. The Hurricane 18 in Oscillating Wall Mount Fan has 3 speeds (high, medium and low) controlled by a dial or pull cords. It has 90oscillation or can be locked in a non-oscillating position. Also features a multi-position tilt. A powder-coated steel grill is clean and durable. The fan blade is made of chemical-resistant polypropylene.
Active Air Carbon Filters are loaded with virgin activated Australian granular carbon. This carbon adsorbs VOC's (volatile organic compounds) therefore trapping every odor molecule that passes through the filter onto the micro-porous carbon surface. These filters are light weight and incredibly effective at removing the most potent and dankest odors. Each filter is machine packed and includes a pre-filter.
Attached flange
1.8" carbon bed depth
Powder coated aluminum tops & bases
Life expectancy up to two years, depending on environmental factors.
HydroLogic® KDF/Catalytic Carbon Upgrade Filters are advanced carbon block pre-filters effective in capturing water-soluble metals, chlorine, chloramines and scale. The carbon media is more porous than coco carbon providing a wider range of filtration. Replacement should be performed when inlet pressure and outlet pressure difference is greater than 10%. NOTE: Systems come standard with HydroLogic® Green Coconut Carbon Filters. The HydroLogic® KDF/Catalytic Carbon Filters are an upgrade option.
For Stealth-RO™ and smallBoy® Systems
Replace every 2,000 Gallons for Stealth-RO Systems
Replace every 6,000 Gallons for smallBoy® Systems
Dimensions: 10.5in x 4.5in
Made of galvanized steel. Prevents reverse air flow when fans are shut off. Saves CO2 and prevents odors from flowing backwards. Rubber gasket pre-installed on exterior for an air tight seal.
Duct Size: 10” | Dimensions: 9.81 x 15.20 x 11.30 in. | Airflow: 1201 CFM | Noise: 48 dBA | Bearings: Dual Ball
A smart inline duct fan designed to quietly ventilate hydroponic grow rooms, boost heating/cooling to rooms, circulate fresh air, exhaust projects, and cool AV closets. Featuring an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. Contains an EC-motor with PWM-control for quiet and energy-efficient performance. The motor box containing the fan’s impeller and blades can be detached from the mounted frame for easy cleaning and maintenance. Includes a smart controller with dynamic climate and time-based programming and can connect to one additional fan. Complete kit includes one duct fan unit, one thermal controller, one corded thermal probe, two duct clamps, installation manual, and all necessary mounting hardware.
SMART CONTROLLER
Features smart programming that not only has basic temperature and humidity triggers, but also allows you to set dynamic fan speeds that would respond based on their changes. Go even further by setting a minimum speed that the fan will run at constantly and would only increase when triggered. Timer, cycle, and schedule modes add custom on-demand activation for a variety of uses. Securely connect with the AC Infinity App via Bluetooth to access your fan remotely, unlock advance programs, set notifications, view historical climate charts, and export CSV data. This controller can connect to two AC Infinity fans with EC Motors including other CLOUDLINE fan sizes, and CLOUDRAY clip-on circulation fans.
QUIET AND ENERGY EFFICIENT DESIGN
Unlike common duct fans that uses an AC-motor which are loud and unmanageable, this duct fan features an EC-motor that is controlled using PWM (Pulse Width Modulation). This technology enables motors to be able to run smoothly at extremely low RPM speeds without generating additional heat or noise. In addition, the duct fan uses a mixed flow design using a stator blade and dual hydrodynamic wind circles. This gives it a high static pressure rating, enabling it to deliver airflow even in applications where air movement is being restricted. The motor houses dual ball bearings rated at 67,000 hours which allows the duct fan unit to be mounted in any direction. The unit is IP44 rated to be highly resistant to dust and liquids, and performs well even in harsh environments.
APPLICATIONS
This quiet duct fan system is popular in a variety of applications including cooling AV equipment rooms, closets, racks, and cabinets. Due to its low noise and advanced control features, it’s also used in various air circulation and ventilation projects including hydroponic grow rooms and tents, exhausting bathrooms and attics, and other installations.
Duct Size: 8” | Dimensions: 8.5 x 11.9 x 9.2 in. | Airflow: 807 CFM | Noise: 39 dBA | Bearings: Dual Ball
A smart inline duct fan designed to quietly ventilate hydroponic grow rooms, boost heating/cooling to rooms, circulate fresh air, exhaust projects, and cool AV closets. Featuring an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. Contains an EC-motor with PWM-control for quiet and energy-efficient performance. The motor box containing the fan’s impeller and blades can be detached from the mounted frame for easy cleaning and maintenance. Includes a smart controller with dynamic climate and time-based programming and can connect to one additional fan. Complete kit includes one duct fan unit, one thermal controller, one corded thermal probe, two duct clamps, installation manual, and all necessary mounting hardware.
SMART CONTROLLER
Features smart programming that not only has basic temperature and humidity triggers, but also allows you to set dynamic fan speeds that would respond based on their changes. Go even further by setting a minimum speed that the fan will run at constantly and would only increase when triggered. Timer, cycle, and schedule modes add custom on-demand activation for a variety of uses. Securely connect with the AC Infinity App via Bluetooth to access your fan remotely, unlock advance programs, set notifications, view historical climate charts, and export CSV data. This controller can connect to two AC Infinity fans with EC Motors including other CLOUDLINE fan sizes, and CLOUDRAY clip-on circulation fans.
QUIET AND ENERGY EFFICIENT DESIGN
Unlike common duct fans that uses an AC-motor which are loud and unmanageable, this duct fan features an EC-motor that is controlled using PWM (Pulse Width Modulation). This technology enables motors to be able to run smoothly at extremely low RPM speeds without generating additional heat or noise. In addition, the duct fan uses a mixed flow design using a stator blade and dual hydrodynamic wind circles. This gives it a high static pressure rating, enabling it to deliver airflow even in applications where air movement is being restricted. The motor houses dual ball bearings rated at 67,000 hours which allows the duct fan unit to be mounted in any direction. The unit is IP44 rated to be highly resistant to dust and liquids, and performs well even in harsh environments.
APPLICATIONS
This quiet duct fan system is popular in a variety of applications including cooling AV equipment rooms, closets, racks, and cabinets. Due to its low noise and advanced control features, it’s also used in various air circulation and ventilation projects including hydroponic grow rooms and tents, exhausting bathrooms and attics, and other installations.
Designed for ventilation applications including HVAC, dryer, grow rooms and tents.
Four layer design makes it more durable and resistant to leaks, tears, and cuts.
Steel-wire spiral structure is flexible and easy-to-install in hard to reach places.
Constructed of Aluminum and thermoplastic, tube can be shortened for various applications.
Ducting Size: 6” | Length: 25 feet | Includes two stainless steel 6 inch duct clamps
PRODUCT DESCRIPTION
This ducting is designed for various ventilation, circulation, and heating/cooling transfer applications. It features four-layer protection, making it more durable and resistant to leaks than single-layer designs. The internal layer is made of heavy-duty dual aluminum foil that is fire/flame resistant. Its outer layer utilizes dual PVC thermoplastic that protects the aluminum from cuts and tears while stopping leakage. Each duct tube is held together by an internal steel-wire spiral that is flexible and easy to install in hard to reach places. The ducting can be shortened by cutting the tube to fit various applications. Includes two stainless steel duct clamps.
APPLICATIONS
Primarily used with duct fan systems in various air circulation and ventilation projects including hydroponic grow rooms and tents, bathrooms and attics, heating and cooling transportation, and other installations. It is also used to cool AV equipment rooms, closets, racks, and cabinets.
Designed for ventilation applications including HVAC, dryer, grow rooms and tents.
Four layer design makes it more durable and resistant to leaks, tears, and cuts.
Steel-wire spiral structure is flexible and easy-to-install in hard to reach places.
Constructed of Aluminum and thermoplastic, tube can be shortened for various applications.
Ducting Size: 4” | Length: 25 feet | Includes two stainless steel 4" duct clamps
PRODUCT DESCRIPTION
This ducting is designed for various ventilation, circulation, and heating/cooling transfer applications. It features four-layer protection, making it more durable and resistant to leaks than single-layer designs. The internal layer is made of heavy-duty dual aluminum foil that is fire/flame resistant. Its outer layer utilizes dual PVC thermoplastic that protects the aluminum from cuts and tears while stopping leakage. Each duct tube is held together by an internal steel-wire spiral that is flexible and easy to install in hard to reach places. The ducting can be shortened by cutting the tube to fit various applications. Includes two stainless steel duct clamps.
APPLICATIONS
Primarily used with duct fan systems in various air circulation and ventilation projects including hydroponic grow rooms and tents, bathrooms and attics, heating and cooling transportation, and other installations. It is also used to cool AV equipment rooms, closets, racks, and cabinets.
Enables UIS™ controllers to work with outlet-powered devices like humidifiers, heaters, dehumidifiers, and A/Cs.
Only equipment that can automatically start running when plugged into an outlet are compatible; see below.
Control and monitor your grow on your phone from anywhere with our latest WiFi-enabled UIS controllers.
Automate climate triggers, cycles, timers, and scheduling; unlock data graphs and alert notifications via our app.
Our ecosystem of controllers and grow equipment work together to create your plant's ideal environment.
PRODUCT DESCRIPTION
A control plug designed to connect our UIS controllers to outlet devices. By connecting your grow equipment to one of our controllers, you can automate it with temperature and humidity triggers, scheduling, cycles, timers, and more. It will also join the UIS platform of smart controllers and grow equipment that work together to create the ideal environment for your plants. Our WiFi-enabled smart controllers allow you to monitor and control your grow on your phone from anywhere while providing data charts and alert notifications via the AC Infinity app. Only works with equipment that can automatically start running when they receive power from an outlet, see below for compatibility details. Includes a 10-foot UIS cord to connect to our CONTROLLER 69, CONTROLLER 69 WiFi, or CONTROLLER 69 PRO for expanded flexibility when mixing and matching grow equipment.
EQUIPMENT COMPATIBILITY
Only outlet devices that can automatically start running when they are plugged in into an outlet are compatible. This plug controls equipment to turn on/off by cutting its power or allowing power to passthrough its outlet. Devices that require pressing a button to start functioning after being plugged into an outlet cannot be controlled. Types of equipment often used with the control plug include, but are not limited to:
Humidifiers
Dehumidifiers
Air Conditioning Units
Heaters
Ventilation and Circulation Fans
Grow Lights
Seedling Heat Mats
Designed with an EC-motor to provide precise air circulation for all stages of a plant's growth.
Digital 10 speeds, from gentle breezes for seedlings to a powerful airflow for flowering.
IP-44 rated specifically for the grow environment to be resistant to high humidity and heat.
Connects with smart controllers to access climate triggers, grow cycles, scheduling, and more.
Impeller: 6.5" | Airflow: Up to 315 CFM | Non-Oscillating Manual Swivel | Fits All Grow Tent Pole Sizes
Designed to quietly ventilate grow tents, exhaust odors, transfer heating/cooling to rooms, and cool AV closets.
Features the same build quality and innovations as the CLOUDLINE Series delivered in a value package.
Includes a wired 10-speed fan controller; also compatible with all CLOUDLINE Series smart controllers.
Mixed flow design combined with an EC-powered motor for a truly quiet and energy efficient performance.
Duct Size: 6" | Dimensions: 7.9 x 12.6 x 8.4 in. | Airflow: 352 CFM | Noise: 34 dBA | Bearings: Dual Ball
PRODUCT DESCRIPTION
This inline fan system packs the CLOUDLINE’s core innovations and premium build quality together to bring you a value package. Designed to quietly cool grow tents, rooms, and closets, and provide ventilation in various air circulation and exhaust projects. Containing an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. The motor box containing the fan’s impeller and blades can be detached from the mounted frame for easy cleaning and maintenance. Complete kit includes one inline fan unit, one speed controller, UIS to 4-pin Molex dongle, installation manual, and all necessary mounting hardware. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment.
Designed to eliminate odors and chemicals for grow tents and hydroponics room.
Features premium-grade Australian charcoal with higher adsorption and longer life rating.
Contains heavy-duty aluminum flanges, galvanized steel meshing, two hanging straps, and two clothed pre-filters.
Enables maximum airflow passthrough for both intake and exhaust configurations.
Duct Opening: 8” | Length: 20" | Airflow Rating: 770 CFM | Carbon: Australian RC412 at 1200+ IAV | Thickness: 38mm
PRODUCT DESCRIPTION
The high-airflow duct filter is designed to use activated carbon to eliminate odors and chemicals, popularly used for hydroponics, grow rooms, kitchens, smoking areas, and other ventilation projects. Features premium-grade Australian Virgin charcoal bed. The filter can be used in conjunction with an inline duct fan to act as both intake and exhaust configuration. Heavy-duty construction contains aluminum flanges and dual-sided galvanized steel mesh. The flanges can also be reversed to prolong the life of the filter. Includes two machine washable pre-filter cloths to prevent carbon residue and two hanging straps for easy installation.
PREMIUM GRADE CARBON
Each carbon filter features premium-grade Australian Virgin charcoal bed rated at 1200+ IAV. It achieves a 38mm charcoal bed thickness and wider mesh openings thanks to a higher microporosity and surface area rating. This combination not only enables a higher adsorption rate without restricting free airflow, but it also allows the carbon filter to last up to 33% longer.
