An advanced grow tent designed to create optimal climate conditions for year-round plant cultivation indoors.
Features durable frame that uses 50% thicker steel poles and carries 2x more weight than standard grow tents.
Higher density 2000D canvas prevents light leaks while diamond mylar amplifies light reflectivity.
Future ready design featuring controller mounting plate with passthrough for no light-leak cable management.
36” x 36” x 72” | 4 Plant Capacity | Viewing Window | 2x Side Doors | Reflective Floor Tray & Tool Bag
PRODUCT DESCRIPTION
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the inner walls, which will reflect and maximize output from your grow light. To ensure maximum reflectivity and prevent light leaking, an inner ribbon stitching creates a seal that lines the zippers inside the grow tent. Additionally, the duct ports’ double cinching design closes them on either side to reinforce the light-proof sealing. Accessories include a waterproof floor tray, a built-in tool bag, and a mounting plate to install your controller onto the grow tent.
PREMIUM BUILD QUALITY
This growing tent is reinforced by its frame’s steel construction, utilizing 22 mm diameter poles compared to standard grow tents’ 18 mm poles. The corner pieces share the same rigidity that keeps the tent upright and sturdier than others. This, along with its roof beams, enables up to 150 pounds of grow equipment support when hung at intersecting points. A metallic finish protects the steel poles from long term wear and tear while presenting a clean aesthetic.
APPLICATIONS
The CLOUDLAB series enables you to grow your desired plant year-round and is specially made for gardening indoors. Place it in any room in your home such as your closet, basement, guest room, or garage. Opening the air venting screen or pairing the floor duct port with an intake fan will allow fresh air to enter the grow tent. Peel back the window flap to track progress while preserving the climate of the inner space, where the tool bag stores and organizes your grow accessories.
48” x 24” x 72” | 4 Plant Capacity | Viewing Window | Accessories: Reflective Floor Tray & Tool Bag
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the inner walls, which will reflect and maximize output from your grow light. To ensure maximum reflectivity and prevent light leaking, an inner ribbon stitching creates a seal that lines the zippers inside the grow tent. Additionally, the duct ports’ double cinching design closes them on either side to reinforce the light-proof sealing. Accessories include a waterproof floor tray, a built-in tool bag, and a mounting plate to install your controller onto the grow tent.
PREMIUM BUILD QUALITY
This growing tent is reinforced by its frame’s steel construction, utilizing 22 mm diameter poles compared to standard grow tents’ 18 mm poles. The corner pieces share the same rigidity that keeps the tent upright and sturdier than others. This, along with its roof beams, enables up to 150 pounds of grow equipment support when hung at intersecting points. A metallic finish protects the steel poles from long term wear and tear while presenting a clean aesthetic.
APPLICATIONS
The CLOUDLAB series enables you to grow your desired plant year-round and is specially made for gardening indoors. Place it in any room in your home such as your closet, basement, guest room, or garage. Opening the air venting screen or pairing the floor duct port with an intake fan will allow fresh air to enter the grow tent. Peel back the window flap to track progress while preserving the climate of the inner space, where the tool bag stores and organizes your grow accessories.
A multipurpose propagation tent designed for seed starting, cloning, and early-stage plant development.
Versatile structure offers dual zipper covers and controller mounts for vertical and horizontal orientations.
Customizable design utilizes mounting bars and shelving to create a wide array of multi-tiered configurations.
2000D canvas locks in humidity for your ideal climate while waterproof drip tray ensures easy cleanup.
Sturdy 24” x 24” x 36” steel frame supports significant weight capacities to provide maximum stability.
An advanced grow tent designed to create optimal climate conditions for year-round plant cultivation indoors.
Features durable frame that uses 50% thicker steel poles and carries 2x more weight than standard grow tents.
2000D canvas with front zipper cover prevents light leaks while diamond mylar amplifies light reflectivity.
Future-ready design featuring controller mounting plate with passthrough for no light-leak cable management.
24” x 24” x 48” | 2 Plant Capacity | 2 (+1 Extra) Hanging Bars | Genuine SBS™ Zippers | Floor Tray & Tool Bag
An advanced grow tent designed to create optimal climate conditions for year-round plant cultivation indoors.
Features durable frame that uses 50% thicker steel poles and carries 2x more weight than standard grow tents.
Higher density 2000D canvas prevents light leaks while diamond mylar amplifies light reflectivity.
Future ready design featuring controller mounting plate with passthrough for no light-leak cable management.
120” x 120” x 80” | 30 Plant Capacity | Viewing Window | Accessories: Reflective Floor Tray & Tool Bag
PRODUCT DESCRIPTION
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the inner walls, which will reflect and maximize output from your grow light. To ensure maximum reflectivity and prevent light leaking, an inner ribbon stitching creates a seal that lines the zippers inside the grow tent. Additionally, the duct ports’ double cinching design closes them on either side to reinforce the light-proof sealing. Accessories include a waterproof floor tray, a built-in tool bag, and a mounting plate to install your controller onto the grow tent.
PREMIUM BUILD QUALITY
This growing tent is reinforced by its frame’s steel construction, utilizing 22 mm diameter poles compared to standard grow tents’ 18 mm poles. The corner pieces share the same rigidity that keeps the tent upright and sturdier than others. This, along with its roof beams, enables up to 150 pounds of grow equipment support when hung at intersecting points. A metallic finish protects the steel poles from long term wear and tear while presenting a clean aesthetic.
APPLICATIONS
The CLOUDLAB series enables you to grow your desired plant year-round and is specially made for gardening indoors. Place it in any room in your home such as your closet, basement, guest room, or garage. Opening the air venting screen or pairing the floor duct port with an intake fan will allow fresh air to enter the grow tent. Peel back the window flap to track progress while preserving the climate of the inner space, where the tool bag stores and organizes your grow accessories.
An advance grow tent kit with smart controls and integrated components to start an indoor growing system.
Controller automates each fan and light with individual programs to dynamically adjust speed and brightness.
Connect your mobile device to our app via WiFi to automate and track your grow tent climate from anywhere.
Next-gen EC-motor inline fan 4”, clip fan 6”, and 100W full-spectrum grow light with Samsung LM301H LEDs.
Premium 2000D Mylar tent 24”x24”x72”, Australian carbon filter, ducting, fabric pots, pruning snips, and more.
Product Description
An advance grow tent system with intelligent controls to manage your grow environment and ensure ideal growing conditions for a successful harvest. The inline fan, carbon filter, and ducting manage your tent’s climate conditions by routing heat, humidity, and odor away from it. Air is circulated via the next-gen clip fan with oscillation range control, re-engineered to provide tailored, custom airflow to your plants over a longer period of time. Algorithmically selected and arranged LM301H diodes on the grow light board emits powerful LED lighting over wide coverage to simulate natural sunlight and optimize growth. These devices are housed in a high-density oxford grow tent, featuring a sturdy steel frame and Mylar walls to create a climate-controlled grow space.
Intelligent Programming
Integrating these components is the CONTROLLER 69 PRO, engineered to provide each device with shared or independent programming. This central control unit can set dynamic programs to activate your grow devices in response to VPD (vapor pressure deficit) levels, in addition to temperature and humidity, to help you further dial into your ideal growing space. Timer, cycle, and schedule modes add custom on-demand activation for a variety of indoor growing uses. Securely connect to the AC Infinity app via WiFi to remotely access your indoor grow system from anywhere outside the boundaries of your home, unlocking advance programs, alerts, notifications, and historical charts.
Complete Kit
This package assembles all the essential components to help you quickly start your indoor grow while eliminating the guesswork of purchasing them individually. The full grow tent kit will include the following:
CLOUDLAB 722 – Advance Grow Tent 24”x24”x72” (x1)
CONTROLLER 69 PRO – Grow Tent Controller (x1)
CLOUDLINE LITE 4 - Inline Fan 4" (x1)
IONBOARD S22 – LED Grow Light Board 100W (x1)
CLOUDRAY S6, Gen 2 – Oscillating Circulation Clip Fan (x1)
Carbon Filter 4” (x1)
4” Flexible Ducting, 8’ Long (x1)
4” Steel Clamps (x2)
5’ Duct Tape (x1)
Hook and Loop Ties (x10)
5-gallon Fabric Pots (x2)
Elastic Trellis Netting 2x2’ (x1)
Black Wire Twist Ties (x1)
Micro-tip Pruning Shears (x1)
An advance grow tent kit with smart controls and integrated components to start an indoor growing system.
Controller automates each fan and light with individual programs to dynamically adjust speed and brightness.
Connect your mobile device to our app via WiFi to automate and track your grow tent climate from anywhere.
Next-gen EC-motor inline fan 6”, clip fan 6”, and 240W full-spectrum grow light with Samsung LM301H LEDs.
Premium 2000D Mylar tent 36”x36”x72”, Australian carbon filter, ducting, fabric pots, pruning snips, and more.
Product Description
An advance grow tent system with intelligent controls to manage your grow environment and ensure ideal growing conditions for a successful harvest. The inline fan, carbon filter, and ducting manage your tent’s climate conditions by routing heat, humidity, and odor away from it. Air is circulated via the next-gen clip fan with oscillation range control, re-engineered to provide tailored, custom airflow to your plants over a longer period of time. Algorithmically selected and arranged LM301H diodes on the grow light board emits powerful LED lighting over wide coverage to simulate natural sunlight and optimize growth. These devices are housed in a high-density oxford grow tent, featuring a sturdy steel frame and Mylar walls to create a climate-controlled grow space.
Intelligent Programming
Integrating these components is the CONTROLLER 69 PRO, engineered to provide each device with shared or independent programming. This central control unit can set dynamic programs to activate your grow devices in response to VPD (vapor pressure deficit) levels, in addition to temperature and humidity, to help you further dial into your ideal growing space. Timer, cycle, and schedule modes add custom on-demand activation for a variety of indoor growing uses. Securely connect to the AC Infinity app via WiFi to remotely access your indoor grow system from anywhere outside the boundaries of your home, unlocking advance programs, alerts, notifications, and historical charts.
Complete Kit
This package assembles all the essential components to help you quickly start your indoor grow while eliminating the guesswork of purchasing them individually. The full grow tent kit will include the following:
CLOUDLAB 733 – Advance Grow Tent 36”x36”x72” (x1)
CONTROLLER 69 PRO – Grow Tent Controller (x1)
CLOUDLINE LITE 6 - Inline Fan 6" (x1)
IONBOARD S33 – LED Grow Light Board 240W (x1)
CLOUDRAY S6, Gen 2 – Oscillating Circulation Clip Fan (x1)
Carbon Filter 6” (x1)
6” Flexible Ducting, 8’ Long (x1)
6” Steel Clamps (x2)
5’ Duct Tape (x1)
Hook and Loop Ties (x10)
5-gallon Fabric Pots (x6)
Elastic Trellis Netting 3x3’ (x1)
Black Wire Twist Ties (x1)
Micro-tip Pruning Shears (x1)
An advance grow tent kit with smart controls and integrated components to start an indoor growing system.
Controller automates each fan and light with individual programs to dynamically adjust speed and brightness.
Connect your mobile device to our app via WiFi to automate and track your grow tent climate from anywhere.
Next-gen EC-motor inline fan 6”, clip fan 6”, and 400W full-spectrum grow light with Samsung LM301H LEDs.
Premium 2000D Mylar tent 48”x48”x80”, Australian carbon filter, ducting, fabric pots, pruning snips, and more.
Product Description
An advance grow tent system with intelligent controls to manage your grow environment and ensure ideal growing conditions for a successful harvest. The inline fan, carbon filter, and ducting manage your tent’s climate conditions by routing heat, humidity, and odor away from it. Air is circulated via the next-gen clip fan with oscillation range control, re-engineered to provide tailored, custom airflow to your plants over a longer period of time. Algorithmically selected and arranged LM301H diodes on the grow light board emits powerful LED lighting over wide coverage to simulate natural sunlight and optimize growth. These devices are housed in a high-density oxford grow tent, featuring a sturdy steel frame and Mylar walls to create a climate-controlled grow space.
Intelligent Programming
Integrating these components is the CONTROLLER 69 PRO, engineered to provide each device with shared or independent programming. This central control unit can set dynamic programs to activate your grow devices in response to VPD (vapor pressure deficit) levels, in addition to temperature and humidity, to help you further dial into your ideal growing space. Timer, cycle, and schedule modes add custom on-demand activation for a variety of indoor growing uses. Securely connect to the AC Infinity app via WiFi to remotely access your indoor grow system from anywhere outside the boundaries of your home, unlocking advance programs, alerts, notifications, and historical charts.
Complete Kit
This package assembles all the essential components to help you quickly start your indoor grow while eliminating the guesswork of purchasing them individually. The full grow tent kit will include the following:
CLOUDLAB 844 – Advance Grow Tent 48”x48”x80” (x1)
CONTROLLER 69 PRO – Grow Tent Controller (x1)
CLOUDLINE LITE 6 - Inline Fan 6" (x1)
IONBOARD S44 – LED Grow Light Board 400W (x1)
CLOUDRAY S6, Gen 2 – Oscillating Circulation Clip Fan (x2)
Carbon Filter 6” (x1)
6” Flexible Ducting, 8’ Long (x1)
6” Steel Clamps (x2)
5’ Duct Tape (x1)
Hook and Loop Ties (x10)
5-gallon Fabric Pots (x8)
Elastic Trellis Netting 4x4’ (x1)
Black Wire Twist Ties (x1)
Micro-tip Pruning Shears (x1)
An advance grow tent kit with smart controls and integrated components to start an indoor growing system.
Controller automates each fan and light with individual programs to dynamically adjust speed and brightness.
Connect your mobile device to our app via WiFi to automate and track your grow tent climate from anywhere.
Next-gen EC-motor inline fan 6”, clip fan 6”, and 200W full-spectrum grow light with Samsung LM301H LEDs.
Premium 2000D Mylar tent 24”x48”x72”, Australian carbon filter, ducting, fabric pots, pruning snips, and more.
Product Description
An advance grow tent system with intelligent controls to manage your grow environment and ensure ideal growing conditions for a successful harvest. The inline fan, carbon filter, and ducting manage your tent’s climate conditions by routing heat, humidity, and odor away from it. Air is circulated via the next-gen clip fan with oscillation range control, re-engineered to provide tailored, custom airflow to your plants over a longer period of time. Algorithmically selected and arranged LM301H diodes on the grow light board emits powerful LED lighting over wide coverage to simulate natural sunlight and optimize growth. These devices are housed in a high-density oxford grow tent, featuring a sturdy steel frame and Mylar walls to create a climate-controlled grow space.
Intelligent Programming
Integrating these components is the CONTROLLER 69 PRO, engineered to provide each device with shared or independent programming. This central control unit can set dynamic programs to activate your grow devices in response to VPD (vapor pressure deficit) levels, in addition to temperature and humidity, to help you further dial into your ideal growing space. Timer, cycle, and schedule modes add custom on-demand activation for a variety of indoor growing uses. Securely connect to the AC Infinity app via WiFi to remotely access your indoor grow system from anywhere outside the boundaries of your home, unlocking advance programs, alerts, notifications, and historical charts.
Complete Kit
This package assembles all the essential components to help you quickly start your indoor grow while eliminating the guesswork of purchasing them individually. The full grow tent kit will include the following:
CLOUDLAB 642 – Advance Grow Tent 24”x48”x72” (x1)
CONTROLLER 69 PRO – Grow Tent Controller (x1)
CLOUDLINE LITE 6 - Inline Fan 6" (x1)
IONBOARD S24 – LED Grow Light Board 200W (x1)
CLOUDRAY S6, Gen 2 – Oscillating Circulation Clip Fan (x1)
Carbon Filter 6” (x1)
6” Flexible Ducting, 8’ Long (x1)
6” Steel Clamps (x2)
5’ Duct Tape (x1)
Hook and Loop Ties (x10)
5-gallon Fabric Pots (x4)
Elastic Trellis Netting 2x4’ (x1)
Black Wire Twist Ties (x1)
Micro-tip Pruning Shears (x1)
60” x 60” x 80” | 10 Plant Capacity | Viewing Window | Accessories: Reflective Floor Tray & Tool Bag
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the inner walls, which will reflect and maximize output from your grow light. To ensure maximum reflectivity and prevent light leaking, an inner ribbon stitching creates a seal that lines the zippers inside the grow tent. Additionally, the duct ports’ double cinching design closes them on either side to reinforce the light-proof sealing. Accessories include a waterproof floor tray, a built-in tool bag, and a mounting plate to install your controller onto the grow tent.
PREMIUM BUILD QUALITY
This growing tent is reinforced by its frame’s steel construction, utilizing 22 mm diameter poles compared to standard grow tents’ 18 mm poles. The corner pieces share the same rigidity that keeps the tent upright and sturdier than others. This, along with its roof beams, enables up to 150 pounds of grow equipment support when hung at intersecting points. A metallic finish protects the steel poles from long term wear and tear while presenting a clean aesthetic.
APPLICATIONS
The CLOUDLAB series enables you to grow your desired plant year-round and is specially made for gardening indoors. Place it in any room in your home such as your closet, basement, guest room, or garage. Opening the air venting screen or pairing the floor duct port with an intake fan will allow fresh air to enter the grow tent. Peel back the window flap to track progress while preserving the climate of the inner space, where the tool bag stores and organizes your grow accessories.
48” x 48” x 80” | 8 Plant Capacity | Viewing Window | Accessories: Reflective Floor Tray & Tool Bag
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the inner walls, which will reflect and maximize output from your grow light. To ensure maximum reflectivity and prevent light leaking, an inner ribbon stitching creates a seal that lines the zippers inside the grow tent. Additionally, the duct ports’ double cinching design closes them on either side to reinforce the light-proof sealing. Accessories include a waterproof floor tray, a built-in tool bag, and a mounting plate to install your controller onto the grow tent.
PREMIUM BUILD QUALITY
This growing tent is reinforced by its frame’s steel construction, utilizing 22 mm diameter poles compared to standard grow tents’ 18 mm poles. The corner pieces share the same rigidity that keeps the tent upright and sturdier than others. This, along with its roof beams, enables up to 150 pounds of grow equipment support when hung at intersecting points. A metallic finish protects the steel poles from long term wear and tear while presenting a clean aesthetic.
APPLICATIONS
The CLOUDLAB series enables you to grow your desired plant year-round and is specially made for gardening indoors. Place it in any room in your home such as your closet, basement, guest room, or garage. Opening the air venting screen or pairing the floor duct port with an intake fan will allow fresh air to enter the grow tent. Peel back the window flap to track progress while preserving the climate of the inner space, where the tool bag stores and organizes your grow accessories.
An advanced grow tent designed to create optimal climate conditions for year-round plant cultivation indoors.
Features durable frame that uses 50% thicker steel poles and carries 2x more weight than standard grow tents.
Higher density 2000D canvas prevents light leaks while diamond mylar amplifies light reflectivity.
Future ready design featuring controller mounting plate with passthrough for no light-leak cable management.
96” x 48” x 80” | 18 Plant Capacity | Viewing Window | Accessories: Reflective Floor Tray & Tool Bag
PRODUCT DESCRIPTION
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for higher durability and light-proofing. Cross-patterned diamond mylar lines the surface of the inner walls, which will reflect and maximize output from your grow light. To ensure maximum reflectivity and prevent light leaking, an inner ribbon stitching creates a seal that lines the zippers inside the grow tent. Additionally, the duct ports’ double cinching design closes them on either side to reinforce the light-proof sealing. Accessories include a waterproof floor tray, a built-in tool bag, and a mounting plate to install your controller onto the grow tent.
PREMIUM BUILD QUALITY
This growing tent is reinforced by its frame’s steel construction, utilizing 22 mm diameter poles compared to standard grow tents’ 18 mm poles. The corner pieces share the same rigidity that keeps the tent upright and sturdier than others. This, along with its roof beams, enables up to 150 pounds of grow equipment support when hung at intersecting points. A metallic finish protects the steel poles from long term wear and tear while presenting a clean aesthetic.
APPLICATIONS
The CLOUDLAB series enables you to grow your desired plant year-round and is specially made for gardening indoors. Place it in any room in your home such as your closet, basement, guest room, or garage. Opening the air venting screen or pairing the floor duct port with an intake fan will allow fresh air to enter the grow tent. Peel back the window flap to track progress while preserving the climate of the inner space, where the tool bag stores and organizes your grow accessories.
A set of grow tent accessory bars designed to provide greater support for equipment while maximizing interior space. Constructed with highly resilient steel to form multiple support systems, the CFM bars can be arranged to handle grow accessories without strain or wall bowing. The durable support clamps double the potential weight capacity for reinforced strength to hold additional or heavier products. Firmly secure the mounting bars in place with adhesive grip padding and hook-and-loop straps for effortless placement and height adjustment.
Accessory bars designed to create additional support systems while maximizing space in grow tents.
Rigid steel build crafted for a reliable hold on grow products and endurance against heavy usage.
Features heavy-duty support clamps that reinforce the mounting bars to double their weight capacity.
Grip pads and hook-and-loop straps firmly hold the bars while offering effortless height adjustment.
Fit for 2x2 grow tents to support supplemental lighting, clip fans, trellises, and drying racks.
Product Description
A set of grow tent accessory bars designed to provide greater support for equipment while maximizing interior space. Constructed with highly resilient steel to form multiple support systems, the CFM bars can be arranged to handle grow accessories without strain or wall bowing. The durable support clamps double the potential weight capacity for reinforced strength to hold additional or heavier products. Firmly secure the mounting bars in place with adhesive grip padding and hook-and-loop straps for effortless placement and height adjustment.
Applications
These mounting bars are fitted for grow tent frames of any size to support such accessories as clip-on fans, trellis nets, and drying racks. They can support additional or larger equipment when using the included support clamps. Supplementary lights can magnetically mount onto these bars and be arranged as inter-canopy side lighting.
Heavy-duty bars designed to not only prevent tent walls from sucking in but also mount grow accessories.
Rigid steel build crafted for a reliable hold on grow products and endurance against heavy usage.
Includes additional support clamps that double the bar's weight capacity to mount heavier items like shelving.
Grip pads and hook-and-loop straps firmly hold the bars while offering effortless height adjustment.
Fit for 2x4 grow tents to support supplemental lighting, clip fans, trellises, and drying racks.
Product Description
A set of grow tent accessory bars designed to provide greater support for equipment while maximizing interior space. Constructed with highly resilient steel to form multiple support systems, the CFM bars can be arranged to handle grow accessories without strain or wall bowing. The durable support clamps double the potential weight capacity for reinforced strength to hold additional or heavier products. Firmly secure the mounting bars in place with adhesive grip padding and hook-and-loop straps for effortless placement and height adjustment.
Applications
These mounting bars are fitted for grow tent frames of any size to support such accessories as clip-on fans, trellis nets, and drying racks. They can support additional or larger equipment when using the included support clamps. Supplementary lights can magnetically mount onto these bars and be arranged as inter-canopy side lighting.
An advanced grow tent designed to create optimal climate conditions for year-round plant cultivation indoors.
Features durable frame that uses 50% thicker steel poles and carries 2x more weight than standard grow tents.
2000D canvas with front zipper cover prevents light leaks while diamond mylar amplifies light reflectivity.
Future ready design featuring controller mounting plate with passthrough for no light-leak cable management.
24” x 24” x 72” | 2 Plant Capacity | 3 Hanging Bars | Genuine SBS™ Zippers | Floor Tray & Tool Bag
Product Description
A grow tent designed to grow plants indoors by providing complete control over climate conditions. Featuring a quick-view observation window, this grow tent uses a waterproof oxford canvas with a 2000D thickness for greater durability and light-proofing. Cross-patterned diamond mylar lines the surface of the inner walls, which will reflect and maximize output from your grow light. The genuine SBS™ zippers ensure maximum convenience by smoothly and securely gliding along the track. An inner ribbon stitching creates a seal that lines the SBS™ zipper inside the grow tent to ensure maximum reflectivity and prevent light leaking. This is paired with a protective cover that runs the length of the front zipper for further protection against intrusive lighting. The duct ports can also close on either side to reinforce this light-proof sealing. Accessories include a waterproof floor tray, a detachable tool bag, additional roof hanging bars, and a mounting plate to install your controller onto the grow tent.
Premium Build Quality
This growing tent is reinforced by its frame’s steel construction, utilizing 22 mm diameter poles compared to standard grow tents’ 18 mm poles. The corner pieces share the same rigidity that keeps the tent upright and sturdier than others. This, along with its roof hanging bars, enables up to 150 pounds of grow equipment support when hung at intersecting points. A metallic finish protects the steel poles from long-term wear and tear while presenting a clean aesthetic.
Applications
The CLOUDLAB series enables you to grow your desired plant year-round and is specially made for gardening indoors. Place it in any room in your home such as your closet, basement, guest room, or garage. Easily organize your grow accessories inside or outside of the tent using the highly convenient detachable tool bag. Opening the air venting screen or pairing the floor duct port with an intake fan will allow fresh air to enter the grow tent. Peel back the window flap to track progress while preserving the climate of the inner space.
Heavy-duty bars designed to not only prevent tent walls from sucking in but also mount grow accessories.
Rigid steel build crafted for a reliable hold on grow products and endurance against heavy usage.
Includes additional support clamps that double the bar's weight capacity to mount heavier items like shelving.
Grip pads and hook-and-loop straps firmly hold the bars while offering effortless height adjustment.
Fit for 5x5 grow tents to support supplemental lighting, clip fans, trellises, and drying racks.
Product Description
A set of grow tent accessory bars designed to provide greater support for equipment while maximizing interior space. Constructed with highly resilient steel to form multiple support systems, the CFM bars can be arranged to handle grow accessories without strain or wall bowing. The durable support clamps double the potential weight capacity for reinforced strength to hold additional or heavier products. Firmly secure the mounting bars in place with adhesive grip padding and hook-and-loop straps for effortless placement and height adjustment.
Applications
These mounting bars are fitted for grow tent frames of any size to support such accessories as clip-on fans, trellis nets, and drying racks. They can support additional or larger equipment when using the included support clamps. Supplementary lights can magnetically mount onto these bars and be arranged as inter-canopy side lighting.
3-digit padlock designed to improve and ensure the security of your grow tent and other property.
Durable metal body and pliable steel cable loop can withstand wear and tear and resist tampering.
Reset button is directly accessible and easy to use to allow quick and effortless combination changes.
High contrast dials are easy to read to enable quick unlocking and minimize eye strain.
2-pack lock kit fit for grow & travel use like grow tents, greenhouses, sheds, lockers, and suitcases.
Product Description
A 3-digit padlock designed to ensure total security in any setting from grow use to property protection and travel. Specially crafted with zinc alloy to resist tampering and endure stress from normal wear and tear use and rough handling. Its straightforward, user-friendly design features an effortless push-button reset process and high contrast dials that are easy to read. The flexible steel cable holds everything in place and allows for smooth placement and transportation to protect your valuables in any situation.
Setting the Combination
To change the combination, set the dials to the lock’s current combination (default is 0-0-0). Push and hold the reset button at the bottom of the lock to set your new combination. Release the reset button to confirm the new combination.
Applications
This combination lock provides complete safety for grow, travel, work, and school applications. Fit for virtually any setting designed to house a lock like:
Grow Tents
Grow Rooms
Greenhouses
Sheds
Fences
Lockers
Suitcases
Backpacks
Briefcases
Accessory bars designed to create additional support systems while maximizing space in grow tents.
Rigid steel build crafted for a reliable hold on grow products and endurance against heavy usage.
Features heavy-duty support clamps that reinforce the mounting bars to double their weight capacity.
Grip pads and hook-and-loop straps firmly hold the bars while offering effortless height adjustment.
Fit for 3x3 grow tents to support supplemental lighting, clip fans, trellises, and drying racks.
Product Description
A set of grow tent accessory bars designed to provide greater support for equipment while maximizing interior space. Constructed with highly resilient steel to form multiple support systems, the CFM bars can be arranged to handle grow accessories without strain or wall bowing. The durable support clamps double the potential weight capacity for reinforced strength to hold additional or heavier products. Firmly secure the mounting bars in place with adhesive grip padding and hook-and-loop straps for effortless placement and height adjustment.
Applications
These mounting bars are fitted for grow tent frames of any size to support such accessories as clip-on fans, trellis nets, and drying racks. They can support additional or larger equipment when using the included support clamps. Supplementary lights can magnetically mount onto these bars and be arranged as inter-canopy side lighting.
A gear board designed to provide additional support for grow equipment while maximizing tent space. By using this tent wall mounting system, you can remove floor items from and declutter your grow tent. Secure your accessories and controllers along its sturdy frame and cable manage their cords out of sight through the various-sized mesh openings. The heavy-duty steel body is built to handle heavier grow devices while enduring consistent exposure to extreme environments. Simply hook the metallic legs to the base of your grow tent, then fasten the stabilizing poles for a vertical mounting structure that can be easily adjusted to ensure duct port access.
