Products eligible for the Grow Tent Builder bundle code (excludes MAP-protected Quest, Anden and dehumidifiers).
Tent Builder eligible
-
Light Rail Light Rail RoboBar 34" x 30" Stabilizer for Large LED Grow Lights
The RoboBar lets a LightRail 3.5 or 4.0 motor carry a larger LED fixture smoothly. Its 34" x 30" frame hangs the light from four corners at steep, triangulated angles, so a big, flat LED doesn't swing as it moves. 34" x 30" (86 x 75 cm) Two outriggers, one center bar, two heavy-duty T-bar connectors and four corner eye screws Two individually secured connectors to the motor, with Nyloc nuts For LightRail 3.5 and 4.0 motors Motor, rail and light not included
$99.00
-
Light Rail Light Rail Auxiliary Trolley with Extreme Duty Wheels, LightRail 3.0-4.20
The same Auxiliary Trolley used in the Add-A-Lamp kit, sold on its own. Use it to carry a second light, or to support vent tubing and power cords so they travel with the motor. Extreme Duty trolley wheels, rated to 60 lb Trolley only, no hardware Works with LightRail 3.0, 3.5, 4.0 and 4.20
$39.00
-
Light Rail Light Rail 3.5 IntelliDrive Light Mover Kit with RoboBar for Large LEDs
A LightRail 3.5 IntelliDrive kit paired with the RoboBar, built to move larger LED fixtures. The RoboBar's triangulated hanging points keep a big, flat LED steady as it travels, so each light covers more of the room. LightRail 3.5 IntelliDrive motor: about 4 ft per minute, 0 to 60 second pause at each end Two-piece 2 m (6'6") rail, hardware and instructions RoboBar: two outriggers, center bar, two heavy-duty T-bar connectors and four corner eye screws Extreme Duty trolley wheels preinstalled, rated to 60 lb Grow light not included Made in the USA by Gualala Robotics; 2-year limited warranty on the motor
$299.00
-
Light Rail Light Rail 4.0 AdjustaDrive Light Mover Kit with RoboBar for Large LEDs
A LightRail 4.0 AdjustaDrive kit paired with the RoboBar for moving larger LED fixtures. Variable speed from 2 to 4 feet per minute, and the RoboBar's triangulated hanging points keep a big, flat LED from swinging as it travels. LightRail 4.0 AdjustaDrive motor: 2 to 4 ft per minute, 0 to 60 second pause at each end Two-piece 2 m (6'6") rail, hardware and instructions RoboBar: 34" x 30" (86 x 75 cm) with two outriggers, center bar, two heavy-duty T-bar connectors and four corner eye screws Extreme Duty trolley wheels preinstalled, rated to 60 lb Grow light not included Made in the USA by Gualala Robotics; 2-year limited warranty on the motor
$349.00
-
Light Rail Light Rail Extreme Duty Trolley Wheel Kit, Rated 60 lb
Extreme Duty trolley wheels with sealed precision steel ball bearings. They've come standard on LightRail 3.5 and 4.0 motors and Auxiliary Trolleys since October 2020; for older motors they're the upgrade for heavier lights such as LEDs or lights with a built-in ballast. Rated to 60 lb per set Sealed precision steel ball bearings for humid grow rooms Lifetime warranty Works with LightRail 3.0, 3.5, 4.0 and 4.20
$23.00
-
Light Rail Light Rail Rail Hanger Brackets for Grow Tents and Greenhouses, 4-Pack
Rail Hanger Brackets are the easiest way to hang LightRail rail from the support bars of a grow tent or greenhouse. Pack of 4 with instructions and zip ties: two per rail, so one pack hangs two rails Fits tubing up to 1.5" in diameter Holds the rail perpendicular to the support bar For LightRail 3.0, 3.5, 4.0 and 4.20 rail
$19.95
-
Light Rail Light Rail RoboStik 24" Lamp Stabilizing Bar
The 24" RoboStik turns a horizontal grow light 90 degrees to the direction of travel, so the light sweeps a wider pattern as it moves along the rail. 24" stabilizing bar Hangs a horizontal light perpendicular to the rail Not needed when the light hangs parallel to the direction of travel Works with LightRail 3.0, 3.5, 4.0 and 4.20
$33.00
-
Light Rail Light Rail 5.0 Side-by-Side Light Mover Motor Only, 4 RPM (No Rail)
The LightRail 5.0 motor alone, for LightRail 5.0 systems. Its high-torque 4 RPM drive and steel-on-steel carrier bearings move crossbars carrying several lights side by side or fore and aft. High-torque 4 RPM instrument-grade drive motor with ball-bearing output shaft Dual-drive "sure grip" design with steel-on-steel carrier bearings Moves up to 9 lights (6 with larger reflectors) on crossbars For LightRail 5.0 only; not compatible with 3.5, 4.0 or 4.20 parts Motor only: no rail, mounting hardware or switch stops included Made in the USA by Gualala Robotics
$349.00
-
Light Rail Light Rail 5.0 Add-A-Bar Kit, Second Crossbar for LightRail 5.0
The Add-A-Bar Kit adds a second crossbar to a LightRail 5.0 system so one motor can carry more lights side by side. LightRail 5.0 Auxiliary Trolley Adjustable crossbar: 81", 87" or 93" wide Push/pull rod, mounting hardware and instructions A third crossbar also needs a 4 ft LightRail 5.0 Auxiliary Rail (sold separately) For LightRail 5.0 only
$146.00
-
Light Rail Light Rail 4.0 AdjustaDrive Light Mover Motor Only, Variable Speed (No Rail)
The LightRail 4.0 AdjustaDrive motor without rail, for growers who already have LightRail rail in place. Speed is adjustable from 2 to 4 feet per minute, with an adjustable pause at each end of the run. Adjustable speed: 2 to 4 ft (0.6 to 1.2 m) per minute 0 to 60 second adjustable time delay at each end Extreme Duty trolley wheels preinstalled, rated to 60 lb Includes switch stops, hardware and instructions Rail not included Made in the USA by Gualala Robotics; 2-year limited warranty
$192.00
-
Light Rail Light Rail 3.5 IntelliDrive Light Mover Kit, 10 RPM Motor with 6'6" Rail
The LightRail 3.5 IntelliDrive is Light Rail's most popular light mover. The 10 RPM motor carries your grow light back and forth along the rail at about 4 feet per minute, with an adjustable pause at each end so plants get even light from one end of the run to the other. Motor travels about 4 ft (1.2 m) per minute (10 RPM) 0 to 60 second adjustable time delay at each end of travel Adjustable travel distance with switch stops Extreme Duty trolley wheels preinstalled, rated to 60 lb (lifetime warranty on the wheels) Low-draw motor: about 5 W In the box: motor, two-piece 2 m (6'6") rail, hardware and instructions Made in the USA by Gualala Robotics; 2-year limited warranty
$209.00
-
Light Rail Light Rail 3.5 IntelliDrive Light Mover Motor Only, 10 RPM (No Rail)
The LightRail 3.5 IntelliDrive motor on its own, for adding a second run to rail you already have or replacing an older motor. It moves a grow light about 4 feet per minute with an adjustable pause at each end of the rail. 10 RPM motor, about 4 ft (1.2 m) per minute 0 to 60 second adjustable time delay at each end Extreme Duty trolley wheels preinstalled, rated to 60 lb Includes switch stops, hardware and instructions Rail not included Made in the USA by Gualala Robotics; 2-year limited warranty
$178.00
-
Light Rail Light Rail 4.0 AdjustaDrive Light Mover Kit, Variable Speed Motor with 6'6" Rail
The LightRail 4.0 AdjustaDrive adds speed control to the light mover: set the motor anywhere from 2 to 4 feet per minute to suit your light and the length of the run, plus an adjustable pause at each end for even coverage. Adjustable speed: 2 to 4 ft (0.6 to 1.2 m) per minute 0 to 60 second adjustable time delay at each end of travel Adjustable travel distance with switch stops Extreme Duty trolley wheels preinstalled, rated to 60 lb Motor draws about 9 W In the box: motor, two-piece 2 m (6'6") rail, hardware and instructions Made in the USA by Gualala Robotics; 2-year limited warranty
$254.00
-
Light Rail Light Rail 4.20 AdjustaDrive Light Mover Kit for 2 Lights
The LightRail 4.20 moves two grow lights inline with one motor. It pairs the variable-speed 4.0 AdjustaDrive motor and rail with a complete Add-A-Lamp kit, so a second light rides its own rail, linked to the motor by a push/pull rod. LightRail 4.0 AdjustaDrive motor: 2 to 4 ft per minute, 0 to 60 second pause at each end Two-piece 2 m (6'6") motor rail plus a second two-piece 2 m rail for the Add-A-Lamp 6 ft push/pull rod and Auxiliary Trolley for the second light Extreme Duty trolley wheels preinstalled, rated to 60 lb Hardware and instructions included Optional: Add-A-Lamp to RoboStik hardware, to hang the second light sideways with a RoboStik Made in the USA by Gualala Robotics; 2-year limited warranty
$309.00 - $313.20
-
GreenBroz GreenBroz M1 Pro Automatic Dry Trimmer
The GreenBroz M1 Pro is the step-up model in the M1 dry trimmer line, built on the same patented top-rotating blade and tool-less, tension-fit design as the M1 Base. It is made for commercial harvests that need steady, repeatable trimming. Throughput: up to 19 lbs (9 kg) per hour Suggested cultivation size: up to 150 lbs Power: 120 VAC / 60 Hz (230 VAC / 50 Hz EU version) Dimensions: 51" x 37.25" x 41.25" Weight: 120 lbs 16-inch patented top-rotating blade Speed and direction control, tool-less disassembly Stainless steel construction 3-year GreenBroz manufacturer warranty Built to order by GreenBroz. After you order we confirm the current build time and the freight quote with you before anything ships.
$14,995.00
-
GreenBroz GreenBroz Harvest Bucket Dry Trimmer for 5-Gallon Bucket and Drill
The GreenBroz Harvest Bucket is a portable dry trimmer that sits on a standard 5-gallon bucket and spins on a low-RPM drill or ratchet. It uses a smaller version of GreenBroz's patented trimming blades, and the bucket catches the trim as you work. Choose a single unit, or a half or full pallet for larger operations. Capacity: up to 4 lbs per hour Drive: 3/8" (9.5-10 mm) hex shaft or socket, low RPM (about one revolution every 2-3 seconds) Dimensions: 14" H x 12" W x 12" L Weight: 10 lbs (single unit) 316 stainless steel blades, dishwasher safe Integrated bucking hooks around the rim Fits most standard 5-gallon buckets (bucket sold separately); for dry trimming only 3-year GreenBroz manufacturer warranty Options: Single unit, Half Pallet or Full Pallet. We confirm the exact unit count on a pallet with you when you order. Built to order by GreenBroz. After you order we confirm the current build time and the freight quote with you before anything ships.
$299.00 - $3,800.00
-
GreenBroz GreenBroz M1 GMP Automatic Dry Trimmer, High Polish Stainless
The GreenBroz M1 GMP is the top model in the M1 dry trimmer line, with the high-polish stainless steel finish GreenBroz offers to meet GMP qualifications. It shares the patented top-rotating blade and tool-less, tension-fit design of the rest of the M1 family. Throughput: up to 19 lbs (9 kg) per hour Suggested cultivation size: up to 150 lbs Power: 120 VAC / 60 Hz (230 VAC / 50 Hz EU version) Dimensions: 51" x 37.25" x 41.25" Weight: 120 lbs 16-inch patented top-rotating blade High-polish stainless steel finish Speed and direction control, tool-less disassembly 3-year GreenBroz manufacturer warranty Built to order by GreenBroz. After you order we confirm the current build time and the freight quote with you before anything ships.
$18,995.00
-
GreenBroz GreenBroz 215 Alchemist Dry Sift Trichome Extractor
The GreenBroz 215 Alchemist is the compact dry-sift machine in the Alchemist line, built for smaller commercial runs. Quad 180-micron screens, an integrated trim tray and collection point lockers sit on a trim catch stand, all in stainless steel and HDPE. Four 180-micron extraction screens standard; 80 or 135-micron screens optional Trim catch stand with integrated trim tray Collection point lockers Dimensions: 60.33 x 60.96 x 67.31 cm Weight: 65 lbs Stainless steel and HDPE construction 3-year GreenBroz manufacturer warranty Built to order by GreenBroz. After you order we confirm the current build time and the freight quote with you before anything ships.
$8,995.00
-
GreenBroz GreenBroz M1 Base Automatic Dry Trimmer
The GreenBroz M1 Base is a floor-standing automatic dry trimmer for commercial harvests. It uses a patented top-rotating blade and a tool-less, tension-fit design that comes apart for cleaning without tools. Throughput: up to 19 lbs (9 kg) per hour Suggested cultivation size: up to 150 lbs Power: 120 VAC / 60 Hz (230 VAC / 50 Hz EU version) Dimensions: 51" x 37.25" x 41.25" Weight: 120 lbs 16-inch patented top-rotating blade Adjustable speed and direction, emergency stop and removable trim catch Stainless steel construction, GMP-compliant design 3-year GreenBroz manufacturer warranty Built to order by GreenBroz. After you order we confirm the current build time and the freight quote with you before anything ships.
$10,995.00
-
GreenBroz GreenBroz Rise Conveyor, Automated Feed Conveyor with Zero-Feed Hopper
The GreenBroz Rise Conveyor lifts and meters material into your grinder or sorter at a steady rate, so one person can keep a post-harvest line running. A removable cleated conveyor and zero-feed hopper make it quick to load and easy to clean. Feed rate: over 5 lbs per minute Hopper capacity: about 15 lbs Dimensions: 167 x 84 x 208 cm Weight: 200 lbs Removable food-safe cleated conveyor HMI digital controls with variable speed Quiet motor and industrial locking casters Stainless steel and HDPE construction 3-year GreenBroz manufacturer warranty Built to order by GreenBroz. After you order we confirm the current build time and the freight quote with you before anything ships.
$14,495.00
-
GreenBroz GreenBroz Rise-N-Sort Automated Flower Sorter and Conveyor System
The GreenBroz Rise-N-Sort links the Rise Conveyor to the Precision Sorter so a commercial harvest is fed, sorted by size and delivered to an output table with very little hand work. Throughput: up to 360 lbs per hour Hopper capacity: 15 lbs Power: 110 VAC / 60 Hz or 220 VAC / 50 Hz Dimensions: 51" H x 37.25" W x 41.25" L Gross weight: 650 lbs HMI digital interface, variable speed, forward/reverse and emergency stop Heavy-duty stainless steel stand, adjustable front shelf and locking wheels Food-grade stainless steel and HDPE Built to order by GreenBroz. After you order we confirm the current build time and the freight quote with you before anything ships.
$26,995.00
-
GreenBroz GreenBroz 420 Alchemist Dry Sift Trichome Extractor
The GreenBroz 420 Alchemist is a commercial-scale dry-sift machine that separates trichomes from plant material through quad screens in a rotating frame. It sits on a heavy-duty stainless steel stand with a folding shelf, a trim catch area and an adjustable timer. Four 180-micron screens standard; 80 and 135-micron screens available, custom sizes on request Integrated filtered exhaust port for dry ice use Adjustable timer, rotational locking frame and locking collection panels Stainless steel collection pans and folding stainless steel shelf Dimensions: 129.5 x 94 x 105 cm Weight: 190 lbs Stainless steel and HDPE construction Industrial locking casters 3-year GreenBroz manufacturer warranty Built to order by GreenBroz. After you order we confirm the current build time and the freight quote with you before anything ships.
$18,995.00
-
GreenBroz GreenBroz Sorter Table, Stainless Steel Output Table for Precision Sorter
The GreenBroz Sorter Table is a stainless steel output table that lines up with the Precision Sorter's outfeed and catches sorted flower in adjustable bins. It rolls on locking wheels so it can be moved around the post-harvest room. Capacity: up to 15 lbs Bin sizes adjustable to your preference; bin depth 5.925" Dimensions: 50" L x 30" W x 33" H Weight: 150 lbs Stainless steel construction Locking wheels for transport Made in the USA Works with the GreenBroz Precision Sorter 3-year GreenBroz manufacturer warranty Built to order by GreenBroz. After you order we confirm the current build time and the freight quote with you before anything ships.
$2,995.00
-
GreenBroz GreenBroz Precision Sorter, Automated Flower Sorting Machine
The GreenBroz Precision Sorter grades trimmed flower by size on an adjustable conveyor, so commercial growers can sort a harvest quickly and consistently. Sort sizes are set with stainless steel sectional dividers, and the integrated hopper can be fed by hand or by the Rise Conveyor. Weight: 300 lbs Dimensions: 119 x 81 x 277 cm Adjustable conveyor and band speed Integrated material hopper Adjustable front shelf and HMI digital interface Whisper-quiet motor and industrial locking casters Stainless steel and HDPE construction Optional configurable output table (sold separately) 3-year GreenBroz manufacturer warranty Built to order by GreenBroz. After you order we confirm the current build time and the freight quote with you before anything ships.
$14,995.00
You have seen 24 out of 4954 products