100 ml EC 1413 calibration solution. Traceable to NIST standard. Close immediately after use. Store between 15-25 °C. Do not return liquid.
Sold as a case of 18 bottles.
This replaceable electrode is suitable for the Substrate EC/Temp meter E300 Pro. The electrode is almost unbreakable and made of stainless steel.
We recommend storing the EC electrode with KCl storage solution in the protective case.
Directions
Detach the PIN connector of the old EC electrode from the meter.
Connect the PIN connector of the new EC electrode to the meter.
Calibrate the meter as described in this manual.
The meter is now ready for use.
The Substrate EC/Temp meter E300 Pro is the perfect digital hand-held meter for measuring the EC and temperature of any soft, moist substrate or liquid. It is suitable for many industries, such as agriculture and horticulture, as well as the food industry.
What sets this meter apart is the almost unbreakable EC electrode. The user-friendly meter is extremely accurate and fits perfectly in the hand with a rubber ergonomic back. The EC electrode is connected to a 90 cm cord for easy use. It also has a 1-point automatic calibration function, making it easy to calibrate. The E300 Pro comes with batteries and has a replaceable electrode to extend the life of the meter.
We recommend storing the meter with KCI storage solution in the protective cover.
Specifications
Range
EC: 0.0 ~ 19.9 mS/cm
Temp.: 0°C ~ 50°C (32°F ~ 122°F)
Resolution
EC: 0.1 mS/cm
Temp.: 0.1 ºC (1.0 ºF)
Accuracy
EC: ± 2% F.S. (0.0 ~ 4 mS/cm)
Temp.: ±0.5°C (32°F)
Temp. compensation: 0°C - 50°C (32°F - 122°F)
Calibration
EC: 1 point auto 1.4 EC
Features
Battery indicator & automatic temp. compensation
Power Supply
3 × 1.5 Volt AG-13 button cell battery (included)
Auto. Power-Off
After 8 minutes
Calibration Indicator
With correct calibration
Waterproof
IP65 (electrodes are IP67 waterproof)
Dimensions
220 x 40 x 40mm
Weight
171g
E300 Pro - Operation and use
E300 Pro - Calibration
E300 Pro - Troubleshooting
This replaceable electrode is suitable for Aqua Master Tools’ Substrate pH/Temp meter S300 Pro 2. The tip of the electrode is made of glass, the remaining of the electrode is made of plastic.
We recommend storing the pH electrode with KCl storage solution in the protective case.
Directions
Detach the BNC connector of the old pH electrode from the meter.
Connect the BNC connector of the new pH electrode to the meter.
Calibrate the meter as described in this manual.
The meter is now ready for use.
The Substrate pH/ Temp meter S300 Pro 2 is the ideal digital hand-held meter to measure the pH and temperature of any soft, moist substrate, liquid, or substance. It is suitable for many industries, such as agriculture, horticulture, and the food industry.
This high-quality and easy-to-use meter is extremely accurate and fits perfectly in the hand with a rubber ergonomic back. The pH electrode is connected to a 90 cm cord for easy use. In addition, it has a 2-point automatic calibration that makes it easy to calibrate. The S300 comes with batteries and has a replaceable probe to extend the life of the pen meter.
We recommend storing the meter with KCI storage solution in the protective cover.
Specifications
Range
pH: 0.0 ~ 14.0 pH
Temp.: 0°C ~ 50°C (32°F ~ 122°F)
Resolution
pH: ± 0.1 pH
Temp.: 0.1 ºC (1.0 ºF)
Accuracy
pH: ± 0.1 pH
Temp.: ±0.5°C (32°F)
Temp. compensation: 0°C - 50°C (32°F - 122°F)
Calibration
pH: 2 point auto 4.0 - 7.0 pH
Features
Battery indicator & automatic temp. compensation
Power Supply
3 × 1.5 Volt AG-13 button cell battery (included)
Auto. Power-Off
After 8 minutes
Calibration Indicator
With correct calibration
Waterproof
IP65 (electrodes are IP67 waterproof)
Dimensions
220 x 40 x 40mm
Weight
158g
S300 Pro 2 - Operation and use
S300 Pro 2 - Calibration
S300 Pro 2 - Troubleshooting
S300 Pro 2Replace the electrode
The Handheld Substrate Meter H600 Pro is the ultimate tool for precise measurement of pH, EC, PPM, TDS, and temperature in soft, moist substrates or liquids. Its user-friendly interface ensures effortless parameter switching, making it accessible to both seasoned professionals and newcomers.
One of its key features is the built-in calibration indicator, which acts as a proactive reminder for recalibration, ensuring consistent measurement accuracy. This meter is also designed to be compatible with the standard Aqua Master Tools pH and EC electrodes.
To enhance convenience, the meter is supplied with a durable carrying case, simplifying transportation, and safeguarding your investment.
In conclusion, the Handheld Substrate Meter H600 Pro combines accuracy, ease of use, and practicality, making it a valuable asset for precise measurements in soft, moist substrates or liquids across various industries.
We recommend storing the pH electrode with KCI storage solution in the protective cover.
Specifications
Range
pH: 0.0 - 14.0 pH
EC: 0.0 - 19.9 mS/cm
TDS: 0.0 - 19.99 PPT
PPM: 0 - 1999 PPM
Temp.: 0°C ~ 50°C (32°F ~ 122°F)
Resolution
pH: ± 0.1 pH
EC: 0.1 mS/cm
TDS: 0.01 PPT
PPM: 10 PPM
Temp.: 0.1°C (1.0 ºF)
Accuracy
pH: ± 0.1 pH
EC: ± 2% F.S.
TDS: ± 2% F.S.
PPM: ± 2% F.S.
Temp.: ± 0.5°C (32°F)
Temp. compensation: 0°C - 50°C (32°F - 122°F)
PPM Scale
700 PPM
Calibration
pH: 2 point auto cal 4.0 - 7.0 pH
EC: 1 point auto cal 1.4 - 3.0 - 12.88 EC
Features
Battery indicator & automatic temp. compensation
Power Supply
(1) 9-Volt Battery (Included)
Auto. Power-Off
After 8 minutes
Calibration Indicator
After Successful Calibration, disappears after 30 days.
Waterproof
IP62 (electrodes are IP67 waterproof)
Dimensions
210 x 120 x 60mm
Weight
430g
The Handheld Meter H600 Pro is a versatile tool designed for the precise measurement of pH, EC, PPM, TDS, and temperature in liquids. Its user-friendly interface ensures effortless parameter switching, making it accessible to both seasoned professionals and newcomers.
One of its key features is the built-in calibration indicator, which acts as a proactive reminder for recalibration, ensuring consistent measurement accuracy. This meter is also designed to be compatible with the Aqua Master Tools substrate electrodes. To enhance convenience, the meter is supplied with a durable carrying case, simplifying transportation and safeguarding your investment.
In conclusion, the Handheld Meter H600 Pro combines accuracy, ease of use, and practicality, making it a valuable asset for liquid analysis across various industries.
We recommend storing the pH electrode with KCI storage solution in the protective cover.
Specifications
Range
pH: 0.0 - 14.0 pH
EC: 0.0 - 19.9 mS/cm
TDS: 0.0 - 19.99 PPT
PPM: 0 - 1999 PPM
Temp.: 0°C ~ 50°C (32°F ~ 122°F)
Resolution
pH: ± 0.1 pH
EC: 0.1 mS/cm
TDS: 0.01 PPT
PPM: 10 PPM
Temp.: 0.1°C (1.0 ºF)
Accuracy
pH: ± 0.1 pH
EC: ± 2% F.S.
TDS: ± 2% F.S.
PPM: ± 2% F.S.
Temp.: ± 0.5°C (32°F)
Temp. compensation: 0°C - 50°C (32°F - 122°F)
PPM Scale
700 PPM
Calibration
pH: 2 point auto cal 4.0 - 7.0 pH
EC: 1 point auto cal 1.4 - 3.0 - 12.88 EC
Features
Battery indicator & automatic temp. compensation
Power Supply
(1) 9-Volt Battery (Included)
Auto. Power-Off
After 8 minutes
Calibration Indicator
After Successful Calibration, disappears after 30 days.
Waterproof
IP62 (electrodes are IP67 waterproof)
Dimensions
210 x 120 x 60mm
Weight
430g
The Aqua Master Tools replaceable EC, CF, PPM, Temp electrode is easy to connect using the PIN connector.
With most conductivity meters, the electrode cannot be replaced because they generally do not break if properly maintained. However, due to aging, limescale, leakage in the electrode or cable breakage due to hardened plastic, the electrode can break. That is why the electrode on our meter is replaceable.
We recommend storing the pH electrode with KCl storage solution in the protective case.
The Aqua Master Tools replaceable pH electrode is easy to connect using the BNC connector. Due to the long double junction pH electrode, it has a longer service life.
Over time, pH electrodes age, with proper care and regular cleaning, the lifespan is extended. However, over time, the reference liquid in the electrode will become contaminated and the electrode will respond more slowly or stop working altogether. The electrode will then need to be replaced.
We recommend storing the pH electrode with KCl storage solution in the protective case.
The Combo meter P700 Pro 2 offers continuous monitoring and is perfect for measuring the pH, EC, CF, PPM, and temperature of all kinds of liquids in different industries. It is equipped with a large LED screen and a modern and robust housing, making it very user-friendly and giving you fast and accurate measurements.
We understand the importance of having a monitor that can be used for a long time. To ensure this, each monitor has replaceable electrodes so that you can use it for years. Additionally, the P700 Pro 2 combo meter is equipped with a rechargeable integrated battery, making it simple to use and able to satisfy all your measuring needs.
We recommend storing the pH electrode with KCI storage solution in the protective cover.
Specifications
Range
pH: 0.0 - 14.0 pH
EC: 0.0 - 19.9 mS/cm
CF: 0.0 - 199 CF
PPM: 0 - 1999 PPM
Temp.: 0°C ~ 50°C (32°F ~ 122°F)
Resolution
pH: ± 0.1 pH
EC: 0.1 mS/cm
CF: 0.1 CF
PPM: 10 PPM
Temp.: 0.1°C (1.0 ºF)
Accuracy
pH: ± 0.1 pH
EC: ± 2% F.S.
CF: ± 2% F.S.
PPM: ± 2% F.S.
Temp.: ± 0.5°C (32°F)
Temp. compensation: 0°C - 50°C (32°F - 122°F)
PPM Scale
700 PPM
Calibration
pH: 2 point auto cal 4.0 - 7.0 pH
EC: 1 point auto cal 1.4 - 3.0 - 12.88 EC
Features
Battery indicator & automatic temp. compensation
Power Supply
DC 6 Volt with rechargeable battery
Auto. Power-Off
After 8 minutes
Calibration Indicator
With correct calibration
Waterproof
IP65 (electrodes are IP67 waterproof)
Dimensions
200 x 140 x 34mm
Weight
418g
Videos
P700 Pro 2 - Operation and use
P700 Pro 2 - pH calibration
P700 Pro 2EC calibration
P700 Pro 2Replace the electrode
This replaceable pH, EC, PPM, TDS, and temperature electrode is suitable for the P160 Pro combo pen. The electrode is IP67 waterproof when attached onto the meter.
Directions
Properly unscrew the sealing ring in the lower part of the meter.
Remove the defected/old electrode by gently pulling it.
Carefully place the new electrode with the recess in the correct position so that the connectors properly connect and do not damage the meter or electrode.
Check that the rubber seal is properly placed.
Tightly tighten the sealing ring.
Calibrate the meter as described in this manual.
The meter is now ready for use.
This replaceable pH, EC, and temperature electrode is suitable for the P110 Pro combo pen. The electrode is IP67 waterproof when attached onto the meter.
Directions
Properly unscrew the sealing ring in the lower part of the meter.
Remove the defected/old electrode by gently pulling it.
Carefully place the new electrode with the recess in the correct position so that the connectors properly connect and do not damage the meter or electrode.
Check that the rubber seal is properly placed.
Tightly tighten the sealing ring.
Calibrate the meter as described in this manual.
The meter is now ready for use.
This replaceable pH, EC, and temperature electrode is suitable for the P110 Pro combo pen. The electrode is IP67 waterproof when attached onto the meter.
Directions
Properly unscrew the sealing ring in the lower part of the meter.
Remove the defected/old electrode by gently pulling it.
Carefully place the new electrode with the recess in the correct position so that the connectors properly connect and do not damage the meter or electrode.
Check that the rubber seal is properly placed.
Tightly tighten the sealing ring.
Calibrate the meter as described in this manual.
The meter is now ready for use.
This replaceable electrode is suitable for the E50 pro EC temp meter. The electrode is IP67 waterproof when attached onto the meter.
Directions
Properly unscrew the sealing ring in the lower part of the meter.
Remove the defected/old electrode by gently pulling it.
Carefully place the new electrode with the recess in the correct position so that the connectors properly connect and do not damage the meter or electrode.
Check that the rubber seal is properly placed.
Tightly tighten the sealing ring.
Calibrate the meter as described in this manual.
The meter is now ready for use.
The EC Temp meter E50 Pro, suitable for many industries, is the ideal digital hand-held meter for measuring the EC and temperature of a variety of liquids. The high-quality and user-friendly meter is extremely accurate and fits perfectly in your hand with a rubber ergonomic back and a cord to keep the cap secure. Additionally, it has a 1-point auto calibration feature which makes it easy to calibrate. Moreover, the meter is IP67 waterproof and can even float, so you won't have to worry about losing it.
The E50 Pro comes with batteries and it has a replaceable electrode to extend the lifetime of the pen meter.
We recommend storing the meter in an upright position with KCI storage solution in the protective cover.
Specifications
Range
EC: 0.0 ~ 19.9 mS/cm
Temp.: 0°C ~ 50°C (32°F ~ 122°F)
Resolution
EC: 0.1 mS/cm
Temp.: 0.1 ºC (1.0 ºF)
Accuracy
EC: ± 2% F.S.
Temp.: ±0.5°C (32°F)
Temp. compensation: 0°C - 50°C (32°F - 122°F)
Calibration
EC: 1 point auto 1.4 EC
Features
Battery indicator & automatic temp. compensation
Power Supply
3 × 1.5 Volt AG-13 button cell battery (included)
Auto. Power-Off
After 8 minutes
Calibration Indicator
With correct calibration
Waterproof
IP67
Dimensions
220 x 40 x 40mm
Weight
102g
This replaceable electrode is suitable for the P50 Pro pH Temp meter . The electrode is IP67 waterproof when attached onto the meter.
Directions
Properly unscrew the sealing ring in the lower part of the meter.
Remove the defected/old electrode by gently pulling it.
Carefully place the new electrode with the recess in the correct position so that the connectors properly connect and do not damage the meter or electrode.
Check that the rubber seal is properly placed.
Tightly tighten the sealing ring.
Calibrate the meter as described in this manual.
The meter is now ready for use.
The pH Temp meter P50 Pro, suitable for many industries, is the ideal digital hand-held meter to measure pH and temperature of a variety of liquids. The high-quality and user-friendly meter is extremely accurate and fits perfectly in your hand because of the rubber ergonomic back and a cord to keep the cap secure. Additionally, it has a 2-point auto calibration feature which makes it easy to calibrate. Moreover, the meter is IP67 waterproof and can even float, so you won't have to worry about losing it. The P50 Pro comes with batteries, and it has a replaceable electrode to extend the lifetime of the pen meter.
We recommend storing the meter in an upright position with KCI storage solution in the protective cover.
Specifications
Range
pH: 0.0 ~ 14.0 pH
Temp.: 0°C ~ 50°C (32°F ~ 122°F)
Resolution
pH: ± 0.1 pH
Temp.: 0.1 ºC (1.0 ºF)
Accuracy
pH: ± 0.1 pH
Temp.: ±0.5°C (32°F)
Temp. compensation: 0°C - 50°C (32°F - 122°F)
Calibration
pH: 2 point auto 4.0 - 7.0 pH
Features
Battery indicator & automatic temp. compensation
Power Supply
3 × 1.5 Volt AG-13 button cell battery (included)
Auto. Power-Off
After 8 minutes
Calibration Indicator
With correct calibration
Waterproof
IP67
Dimensions
220 x 40 x 40mm
Weight
102g
The Grow1 Temperature and Humidity Meter with probe is the must have product for every grow room or greenhouse. This meter includes a wired probe and displays the date, time, temperature, humidity, weather forecast, hourly thermometer trends, max/min temperature and humidity records, and has an alarm and snooze function. Requires (2) AG10 batteries, not included.
A simple probe-style meter for soil and containers. Push the probe into the soil and flip one switch to read moisture, light or pH, so you can tell when to water, whether the pH is in range, and if a spot is getting enough light. No batteries needed.
Moisture: 1–10 (dry to wet)
Light: 0–2,000 (low to strong light)
Soil pH: 3.5–8
One switch to change modes; no battery required
10.8" long; for indoor and outdoor soil
For soil only; not for testing water or other liquids
The AeroLab P30 is Vivosun's higher-accuracy pH pen for hydroponic reservoirs, DWC and drip systems. It reads to ±0.01 pH with automatic temperature compensation, recognizes buffer solutions on its own during calibration, and has a replaceable probe so the meter outlasts the electrode. It also reads ORP and water temperature.
pH range 0–14; resolution 0.01; accuracy ±0.01 pH
ORP range ±1,000 mV; temperature 32–122°F (0–50°C), ±0.5°C
Automatic temperature compensation (ATC)
1-, 2- or 3-point auto calibration with buffer recognition; NIST (4.01/6.86/9.18) and USA (4.00/7.00/10.01) standards
Interchangeable probe; sealed cap with moist sponge to protect the electrode
IP67 waterproof and dustproof PC housing
Backlit LCD; auto and manual hold; adjustable auto shut-off
Powered by 4 AAA batteries (included); 1.65" x 1.65" x 7.52" (42 x 42 x 191 mm)
In the box: P30 pH meter, 4 AAA batteries, 2 each of pH 4.01, 6.86 and 9.18 buffer powder, 50 ml measuring cup.
Pre-measured buffer powder for calibrating any pH meter or probe. Empty a packet into 250 ml of distilled or deionized water, stir until it dissolves, and you have a fresh calibration solution. The individually sealed packets keep well in a drawer or tool bag.
18 packets: 6 each of pH 4.00, pH 6.86 and pH 9.18
±0.01 pH accuracy at 77°F (25°C)
Each packet makes 250 ml of buffer solution
Individually sealed packets; dissolves quickly
Works with any pH tester or probe
A two-pen kit for keeping tabs on a nutrient reservoir: a pH tester and a 3-in-1 meter that reads TDS, EC and water temperature. Both have automatic temperature compensation, backlit screens and a hold button, and the pH pen calibrates itself with the buffer powder packets that come in the box.
pH tester: 0.00–14.00 pH, ±0.1 pH accuracy, one-touch automatic calibration
3-in-1 tester: 0–9,999 ppm TDS, 0–9,999 µS/cm EC, 32–176°F (0.1–80°C), °F/°C switchable
Automatic temperature compensation (ATC) on both meters
Large backlit LCDs; hold function locks readings
Memory keeps settings through power interruptions
For hydroponic reservoirs, RO systems, aquariums, pools and spas
Buffer powder packets included for pH calibration
