SUPERthrive Bloom 3-12-6 is a low nitrogen, high phosphorus plant nutrient formula containing all 6 essential macronutrients and all 10 essential micronutrients.
For Ornamentals, Vegetables, and Herbs
Supplies a balance of high nitrate to ammoniacal nitrogen ratio needed to avoid stem elongation in flowering plants and vegetables.
Specifically formulated to encourage the development of large fruit and vegetables, while providing complete plant nutrition.
It is ideal for tomatoes, all fruits, all vegetables, herbs and flowering plants.
Apply BLOOM before flowers appear to help initiate and sustain flowering.
When applied, the nutrients in BLOOM are immediately available, giving your plants the ability to access the nutrients they need in critical times.
Recommended Crops: All blooming and flowering plants like alpinia, begonias, gerbera daisies, gardenias, geraniums, and roses.
Application Rates
Maintenance: Mix ¼ – ½ tsp. per gallon of water with every watering.
Production: Mix 1 – 2 tsp. per gallon of water with every watering.
Monthly Feeding: Use 2 – 3 tsp. per gallon of water.
Siphon Mixer: (1:15 ratio) Mix 2 – 4 fl. oz. per gallon of water for a concentrate feed solution.
Irrigation Injector: (1:100 ratio) Mix 10 – 18 fl. oz. per gallon of water to make an injectable concentrate.
Foliar Application: Mix ¼ – ½ tsp. per gallon of water and spray directly of leaves.
BLOOM 3-12-6 is specifically formulated to be used during the flowering stage. Begin using BLOOM before your plants decide to shift into the flowering phase.
A lower level of nitrogen will help reduce stem elongation and invigorate flowering sites to promote dense, vibrant flowers.
High levels of phosphorus and potassium push production of dense, healthy flowers.
When applied, the plant nutrients in BLOOM are immediately available, giving your plants the ability to access all the minerals they need for optimum production.
Ample levels of calcium, no need to supplement with a Cal-Mag product.
Use with either complete base nutrient Foliage-Pro or GROW to regulate nitrogen levels for best quality and quantity.
Maximum, dense healthy flower growth!
Application Rates
Hydroponics: Mix 2 – 3 tsp. per gal. of water for recirculating systems or 1 – 2 tsp. per gal. for non-recirculating systems depending upon growing conditions.
Siphon Mixer: (1:15 ratio) Mix 2 – 4 fl. oz. per gallon of water for a concentrate feed solution.
Irrigation Injector: (1:100 ratio) Mix 10 – 18 fl. oz. per gallon of water to make an injectable concentrate.
Foliar Application: Mix ¼ – ½ tsp. per gallon of water and spray directly of leaves.
For outdoor applications in soil, feed 1 – 2 tsp/gal with every watering.
Nutrient Analysis
Total Nitrogen (N)___3.0%*
Magnesium (Mg)___0.5%*
Iron (Fe)___0.1%*
Ammoniacal (NH4)___0.7%*
Sulfur (S)___0.09%
Manganese (Mn)___0.05%*
Nitrate (NO3)___2.3%*
Boron (B)___0.02%
Molybdenum (Mo)___0.0009%*
Phosphorus (P2O5)___12.0%*
Chlorine (Cl)___0.1%
Nickel (Ni)___0.0001%
Potassium (K2O)___6.0%*
Cobalt (Co)___0.0015%*
Sodium (Na)___0.1%
Calcium (Ca)___ 2.0%*
Copper (Cu)___0.05%*
Zinc (Zn)___0.05%*
*Nutrients marked with an asterisk (*) are guaranteed in all states. The other minerals are at concentration levels which are ideal to achieve optimum crop growth but may be below levels to satisfy the labeling requirements of some state fertilizer laws.
All natural, Biological Mosquito Control is an E.P.A. registered, biological larvicide ideal to prevent mosquitoes & fungus gnats from breeding. Quickly controls insect larvae within 24 hours, killing developing mosquitoes before they become breeding, biting adults, including those which may transmit West Nile Virus and Equine Encephalitis, and those which may transmit Heartworm Disease to dogs and cats.
E.P.A. Registered
Microbe-Lift Biological Insect Control is a concentrated liquid formula specially formulated for hydroponics and grow facilities, decorative water gardens, fountains and areas where standing water exists. All natural & it can be applied to areas used by or in contact with humans, animals, horses, livestock, pets, birds or wildlife.
E.P.A. Registered
Can be used for insect larvae in hydroponics
Significantly lower potential for development of resistance in target insect populations than chemical larvicides such as methoprene
What it does:
They cause damage to the roots and cause problems in the leaves and slowed growth.
Dosage Rate for Treating Fungus Gnats
For light infestations, use: 2.5 – 5ml (.5 – 1 tsp) per gallon.
For heavy infestations, use: 10 – 20ml (2 -4 tsp) per gallon. If larvae are present in the soil/growth media, apply as a drench sufficiently to wet the surface of the media.
To help prevent infestations, use: 2.5 – 5ml (.5 – 1tsp) per gallon and apply weakly.
Getting Rid of Fungus, Gnats, and Mosquitos
Biological Moisquito Control quickly controls insect larvae within 24 hours! This liquid formula is easy to dispense into your feed cycle with the reccomended dosage.
Notes
This product is not permitted for sale within the following states/countries: NY, RI, TX, Canada
Xtreme Gardening AZOS Red Liquid is pure, fresh, and living bacterial inoculant. Azos Red Liquid is a naturally occurring bacteria that benefit plant growth. Azos converts atmospheric nitrogen into a useable form that is readily available to the plants. Great for container, raised beds, and row crops.
Growth Promoting Bacteria
Nitrogen-Fixing Bacteria - Of all the nutrients transported to plants through the soil, nitrogen is required in the greatest amount. It drives chlorophyll production in the foliage and keeps plants green and efficient. It is a fundamental part of amino acids and other compounds that assure crop health and productivity. It is a major part of every protein molecule and soils are often deficient in this element. However, the atmosphere is comprised of around 80% nitrogen which is in a form (N2 or Atmospheric Nitrogen) that is not conventionally available to plants. Nitrogen From the Air - Somewhere along with the evolutionary development of the "Plant - Soil - Microbial Matrix", certain bacteria began to specialize in tasks to enhance plant growth, which in return provided the microbes with a food source exchange opportunity. A select group of bacteria classified as "Diazotrophs" began to supply nitrogen to plants from a range of sources, including decomposed plant litter, dead micro-organisms, and sequestration of atmospheric nitrogen. Azos belongs to the last of these groups and functions primarily as an atmospheric nitrogen converter. A Natural Isolate From the Amazon - Azos is a particularly-efficient agent originally isolated in the Amazon Basin where the lack of soil, the rapid breakdown of any vegetation by hungry microbes, and the environmental conditions which require "Growth to Survive" is a fundamental proposition of the ecosystem. AZOS specializes in the highly-efficient conversion of the N2 form of nitrogen into plant-available ammoniacal nitrogen. Plant Growth Promoter - With the increased accessibility of nitrogen in the soil, AZOS can catalyze a natural growth hormone within plants that help promote more root and vegetative growth. AZOS is excellent for rooting out cuttings, transplants, and water-borne applications throughout various plant stages.
Strengths
AZOS is a beneficial bacteria that promotes plant growth naturally by fixing atmospheric Nitrogen and converting it to a plant available nutrient. The supplemental source of nitrogen increases the plant's ability to quickly establish roots for faster vegetative growth.
Uses
Apply around the root zone of plants. Apply weekly through vegetative and early flower stages.
Compatibility
AZOS works in all types of growing media and can be used in combination with synthetic and natural fertilizers. Great for Vegetables, Fruits, Herbs & Flowers.
Specifications
Diazotrophic Bacteria:Azospirillum brasilense ............. 1.0 x 10^6 CFU/gram*Inert Carrier ................................................ 99% *(Colony Forming Units)
Propagation Stages
1. Dipping/soaking cuttings – Add 20ml per gallon of water. Dip or soak cutting tips for at least 15 seconds before transferring to rooting media or machines.2. Soak grow plugs/rockwool cubes – Add 20ml per gallon of water. Soak grow plugs/rockwool cubes for 10 minutes. Propagation machines (EZ Clone, Turbo Cloner) 1. Adjust the pH of the water to 5.5-6.0.2. Add 5ml per gallon of water.
General Watering
In reservoirs or hand-watering – Add 5mL per gallon of water. Watering a minimum of 1/4 gallon - 1/3 gallon per potted plant. Raised beds – Add 5ml per gallon of mix and water in regularly every 1-2 weeks during vegetative stages.May be mixed with other organic fertilizers or plant bio-stimulants.
Irrigation
May be applied by overhead or drip irrigation at the recommended rate of 16 ounces per acre.
Dosing Machines and Nutrient Delivery Systems
Add 3.75 gallons to of AZOS Red Liquid to 1.25 gallons of water in order to create a concentrate. The concentrate is then applied through 2000 gallons of water.
Hydroponic Application
Add 5ml per gallon of water in reservoirs through veg/grow.
Bud Builder is a super-concentrated blend of plant protein. It is a one-part additive for hydroponic, soil, and foliar applications used throughout the plant's life cycle. Bud Builder should be used in addition to your normal fertilizer program. It's easy to use, and your plants will love it!
Bud Builder enhances nutrient uptake and transport in your plants, boosts photosynthesis, and increases metabolic growth. At 1ml per gallon, this is the most concentrated and cost-effective protein blend on the market!
4 fl oz makes 100 gallons!
When And Where To Use
Foliar Application: Mix 0.5ml with 1 gallon of water. Mist or spray the surface of the plant leaves until runoff occurs. Apply every other week.
Hydroponic Use: Mix 1ml with one 1 gallon of water.
Soil Amendment: Mix 1ml to 2ml with 1 gallon of water. Apply generously around the base of the plant, followed by regular irrigation. Apply every other week.
Bud Builder is a super-concentrated blend of plant protein. It is a one-part additive for hydroponic, soil, and foliar applications used throughout the plant's life cycle. Bud Builder should be used in addition to your normal fertilizer program. It's easy to use, and your plants will love it!
Bud Builder enhances nutrient uptake and transport in your plants, boosts photosynthesis, and increases metabolic growth. At 1ml per gallon, this is the most concentrated and cost-effective protein blend on the market!
32 fl oz makes 1000 gallons!
When And Where To Use
Foliar Application: Mix 0.5ml with 1 gallon of water. Mist or spray the surface of the plant leaves until runoff occurs. Apply every other week.
Hydroponic Use: Mix 1ml with one 1 gallon of water.
Soil Amendment: Mix 1ml to 2ml with 1 gallon of water. Apply generously around the base of the plant, followed by regular irrigation. Apply every other week.
Bud Builder is a super-concentrated blend of plant protein. It is a one-part additive for hydroponic, soil, and foliar applications used throughout the plant's life cycle. Bud Builder should be used in addition to your normal fertilizer program. It's easy to use, and your plants will love it!
Bud Builder enhances nutrient uptake and transport in your plants, boosts photosynthesis, and increases metabolic growth. At 1ml per gallon, this is the most concentrated and cost-effective protein blend on the market!
5 gallon makes 20000 gallons!
When And Where To Use
Foliar Application: Mix 0.5ml with 1 gallon of water. Mist or spray the surface of the plant leaves until runoff occurs. Apply every other week.
Hydroponic Use: Mix 1ml with one 1 gallon of water.
Soil Amendment: Mix 1ml to 2ml with 1 gallon of water. Apply generously around the base of the plant, followed by regular irrigation. Apply every other week.
Bud Builder is a super-concentrated blend of plant protein. It is a one-part additive for hydroponic, soil, and foliar applications used throughout the plant's life cycle. Bud Builder should be used in addition to your normal fertilizer program. It's easy to use, and your plants will love it!
Bud Builder enhances nutrient uptake and transport in your plants, boosts photosynthesis, and increases metabolic growth. At 1ml per gallon, this is the most concentrated and cost-effective protein blend on the market!
1 gallon makes 4000 gallons!
When And Where To Use
Foliar Application: Mix 0.5ml with 1 gallon of water. Mist or spray the surface of the plant leaves until runoff occurs. Apply every other week.
Hydroponic Use: Mix 1ml with one 1 gallon of water.
Soil Amendment: Mix 1ml to 2ml with 1 gallon of water. Apply generously around the base of the plant, followed by regular irrigation. Apply every other week.
Features include... PRE-INSTALLED ADJUSTABLE SOCKET This incredibly unique design allows you to adjust the position of the socket up and down to achieve optimum light reflectivity no matter what size bulb you use. HINGED GLASS & STEEL CLAMPS Flip down glass makes this reflector a breeze to use, and the new rubber seal and steel locking clamps ensure a secure, air-tight close. REFLECTIVE ALUMINUM This reflector features highly reflective hammertone aluminum on all 4 side walls to maximize light efficiency. HANGING CLIPS INCLUDED Included with this reflector are 2 Universal Hanging Clips. PRE-INSTALLED 15 FT CORD & PLUG The E39 6KV 2000W socket features a 15 ft power cord which is compatible with the most common ballasts. Dimensions: 22"L x 20"W x 11"H Weight: 19.5LBS
Tiresias Mist is safe, effective, and a reliable alternative to other methods that have disappointing results. One bottle provides enough solution for one branch that will produce female pollen. That pollen is then delivered to the flowers of a dioecious plant which in turn produces seeds.At the same time, the stem that is being treated should not be consumed (it will be covered with pollen sacs so that shouldn’t be an issue). Finally, the most important aspect of using this product: have fun, get crazy, and start your experimentations. You now have the ability and the freedom to produce your own female seeds and genetics! Enjoy.
Benefits
Always female seeds.No more guessing involved
No more waiting weeks for overseas deliveries
A tap root from a seed will produce higher yields
Store seeds for future use and crop timing
Easier to transport seeds versus seedlings or clones
How It Works
The active ingredient in Tiresias Mist is safe and effective. What you are doing using Tiresias Mist, is taking a female plant, treating one branch and enabling that one branch to create male characteristics i.e. pollen sacs.
Directions
You may also want to experiement by using the pollen from one plant to pollinate a different plant creating perfect genetic crosses while maintaing the 100% female seeds. Male seeds are impossible because the pollen still carries over the female genetics. This is different from using a hermaphrodite method as there is no risk in carrying over the hermaphrodite trait to the seeds while using Tiresia’s Mist. Isolate plants that are being treated from other female plants you do not wish to produce seeds. Pollen is minute and very efficient in finding females. Choose a plant that has not started flowering and is at least two weeks in the vegetative cycle. A good rule of thumb is to start treating the plant when it is five inches in height, depending on the variety, and five days prior to going into the flowering cycle. Mark one branch that you wish to treat. Using a ribbon works well. Protect the rest of the plant from any over spray. Remember to spray lightly so the entire branch is misted. Concentrate your spraying on the stem versus the foliage though, the treatment of the full stem is the most important part of this process. Mist the chosen branch once a day for 21 days. The male characteristics, pollen sacs, will lag behind the female flowers so be patient! Continue growing plant until female flowers are showing and our ready to collect pollen. Hold on to the pollen for future use or dust your female flowers with the pollen produced in step 4. Continue growing until your seeds are mature and then harvest and store them for future use.
Amino Blast adds a blast of essential amino acids to your plants. It contains all 17 of the “L” amino acids that benefit a plant's growth, flowering and fruiting, giving plants an immediate protein boost so they can put their energy into growth. The amino acids help plants take up nutrients and improve the color, size and appearance of flowers.Amino Blast can be used alongside the other products you already use without the risk of over-fertilizing.General usage
Hydroponics: use 15 mL per gallon in your reservoir.
Soil, coco or other media: use 15 mL per gallon every time you water. Discard any unused mixed nutrients.
Note: never premix with another product; always add directly to the reservoir. Adjust your pH after adding all your products.X Nutrients products are not available for sale in Oregon.
This Cultured Solutions mid-flower booster from Current Culture H2O is a zero-nitrogen formula high in phosphorus and potassium. It also supplies sulfur and magnesium, which plants use to build amino acids, sugars and starches while flowers and fruit are forming. The 55-gallon drum is sized for commercial grow rooms and nutrient injection systems.
Guaranteed analysis: 0-4.5-4.8
Derived from: potassium phosphate, potassium sulfate, magnesium sulfate
Introduce during weeks 4 through 8 of flowering
Use with Cultured Solutions Coco Cal and the Bloom A and B base nutrients
Follow the Cultured Solutions Recirculating Hydro Feeding Schedule for RDWC, DWC, NFT and aeroponics, or the Drain to Waste schedule for rockwool, coco and soilless
Recommended starting EC of source water: 0–20 ppm
Shake well before use; store in a cool, dark place
Size: 55 gallons
This Cultured Solutions mid-flower booster from Current Culture H2O is a zero-nitrogen formula high in phosphorus and potassium. It also supplies sulfur and magnesium, which plants use to build amino acids, sugars and starches while flowers and fruit are forming. The 5-gallon jug suits growers running several reservoirs or a dosing setup.
Guaranteed analysis: 0-4.5-4.8
Derived from: potassium phosphate, potassium sulfate, magnesium sulfate
Introduce during weeks 4 through 8 of flowering
Use with Cultured Solutions Coco Cal and the Bloom A and B base nutrients
Follow the Cultured Solutions Recirculating Hydro Feeding Schedule for RDWC, DWC, NFT and aeroponics, or the Drain to Waste schedule for rockwool, coco and soilless
Recommended starting EC of source water: 0–20 ppm
Shake well before use; store in a cool, dark place
Size: 5 gallons
Cultured Solutions Bloom B is part B of Current Culture H2O's two-part base nutrient for the flowering stage. It is a full-spectrum mineral formula for recirculating hydro and drip or drain-to-waste systems, and it is always mixed in equal parts with Bloom A. The 55-gallon drum is sized for commercial grow rooms and nutrient injection systems.
Guaranteed analysis: 0.9-4.8-6.2
Derived from: potassium phosphate, potassium nitrate, magnesium sulfate
Mix 2–5 mL per gallon (0.5–1 mL per gallon for seedlings and cuttings) and adjust to pH 5.8
Always use equal parts Bloom A and Bloom B
Follow the Cultured Solutions Recirculating Hydro Feeding Schedule for RDWC, DWC, NFT and aeroponics, or the Drain to Waste schedule for rockwool, coco and soilless
Recommended starting EC of source water: 0–20 ppm
Shake well before use; store in a cool, dark place
Size: 55 gallons
Cultured Solutions Bloom B is part B of Current Culture H2O's two-part base nutrient for the flowering stage. It is a full-spectrum mineral formula for recirculating hydro and drip or drain-to-waste systems, and it is always mixed in equal parts with Bloom A. The 5-gallon jug suits growers running several reservoirs or a dosing setup.
Guaranteed analysis: 0.9-4.8-6.2
Derived from: potassium phosphate, potassium nitrate, magnesium sulfate
Mix 2–5 mL per gallon (0.5–1 mL per gallon for seedlings and cuttings) and adjust to pH 5.8
Always use equal parts Bloom A and Bloom B
Follow the Cultured Solutions Recirculating Hydro Feeding Schedule for RDWC, DWC, NFT and aeroponics, or the Drain to Waste schedule for rockwool, coco and soilless
Recommended starting EC of source water: 0–20 ppm
Shake well before use; store in a cool, dark place
Size: 5 gallons
Cultured Solutions Bloom A is part A of Current Culture H2O's two-part base nutrient for the flowering stage. It is a full-spectrum mineral formula that supplies the elements plants need through flowering and fruiting, and it is always mixed in equal parts with Bloom B. The 55-gallon drum is sized for commercial grow rooms and nutrient injection systems.
Guaranteed analysis: 3.7-0-3
Derived from: ammonium calcium nitrate, potassium nitrate, iron EDTA, copper EDTA, manganese EDTA, sodium molybdate, sodium borate, zinc EDTA
Mix 2–5 mL per gallon (0.5–1 mL per gallon for seedlings and cuttings) and adjust to pH 5.8
Always use equal parts Bloom A and Bloom B
Follow the Cultured Solutions Recirculating Hydro Feeding Schedule for RDWC, DWC, NFT and aeroponics, or the Drain to Waste schedule for rockwool, coco and soilless
Recommended starting EC of source water: 0–20 ppm
Shake well before use; store in a cool, dark place
Size: 55 gallons
Cultured Solutions Bloom A is part A of Current Culture H2O's two-part base nutrient for the flowering stage. It is a full-spectrum mineral formula that supplies the elements plants need through flowering and fruiting, and it is always mixed in equal parts with Bloom B. The 5-gallon jug suits growers running several reservoirs or a dosing setup.
Guaranteed analysis: 3.7-0-3
Derived from: ammonium calcium nitrate, potassium nitrate, iron EDTA, copper EDTA, manganese EDTA, sodium molybdate, sodium borate, zinc EDTA
Mix 2–5 mL per gallon (0.5–1 mL per gallon for seedlings and cuttings) and adjust to pH 5.8
Always use equal parts Bloom A and Bloom B
Follow the Cultured Solutions Recirculating Hydro Feeding Schedule for RDWC, DWC, NFT and aeroponics, or the Drain to Waste schedule for rockwool, coco and soilless
Recommended starting EC of source water: 0–20 ppm
Shake well before use; store in a cool, dark place
Size: 5 gallons
Cultured Solutions Veg B is part B of Current Culture H2O's two-part base nutrient for the vegetative stage. It is a pH-stable, chelated mineral formula made for recirculating hydro and drip or drain-to-waste systems, and it is always mixed in equal parts with Veg A. The 55-gallon drum is sized for commercial grow rooms and nutrient injection systems.
Guaranteed analysis: 1.3-2-5.9
Derived from: potassium phosphate, potassium nitrate, magnesium sulfate
Mix 2–5 mL per gallon (0.5–1 mL per gallon for seedlings and cuttings) and adjust to pH 5.8
Always use equal parts Veg A and Veg B
Follow the Cultured Solutions Recirculating Hydro Feeding Schedule for RDWC, DWC, NFT and aeroponics, or the Drain to Waste schedule for rockwool, coco and soilless
Recommended starting EC of source water: 0–20 ppm
Shake well before use; store in a cool, dark place
Size: 55 gallons
Cultured Solutions Veg B is part B of Current Culture H2O's two-part base nutrient for the vegetative stage. It is a pH-stable, chelated mineral formula made for recirculating hydro and drip or drain-to-waste systems, and it is always mixed in equal parts with Veg A. The 5-gallon jug suits growers running several reservoirs or a dosing setup.
Guaranteed analysis: 1.3-2-5.9
Derived from: potassium phosphate, potassium nitrate, magnesium sulfate
Mix 2–5 mL per gallon (0.5–1 mL per gallon for seedlings and cuttings) and adjust to pH 5.8
Always use equal parts Veg A and Veg B
Follow the Cultured Solutions Recirculating Hydro Feeding Schedule for RDWC, DWC, NFT and aeroponics, or the Drain to Waste schedule for rockwool, coco and soilless
Recommended starting EC of source water: 0–20 ppm
Shake well before use; store in a cool, dark place
Size: 5 gallons
Cultured Solutions Veg A is part A of Current Culture H2O's two-part base nutrient for the vegetative stage. It is a pH-stable, chelated mineral formula with the macro and micro nutrients plants need, made for recirculating hydro and drip or drain-to-waste systems, and it is always mixed in equal parts with Veg B. The 55-gallon drum is sized for commercial grow rooms and nutrient injection systems.
Guaranteed analysis: 5-0-0.3
Derived from: ammonium calcium nitrate, potassium nitrate, iron EDTA, copper EDTA, manganese EDTA, sodium molybdate, sodium borate, zinc EDTA
Mix 2–5 mL per gallon (0.5–1 mL per gallon for seedlings and cuttings) and adjust to pH 5.8
Always use equal parts Veg A and Veg B
Follow the Cultured Solutions Recirculating Hydro Feeding Schedule for RDWC, DWC, NFT and aeroponics, or the Drain to Waste schedule for rockwool, coco and soilless
Recommended starting EC of source water: 0–20 ppm
Shake well before use; store in a cool, dark place
Size: 55 gallons
Cultured Solutions Veg A is part A of Current Culture H2O's two-part base nutrient for the vegetative stage. It is a pH-stable, chelated mineral formula with the macro and micro nutrients plants need, made for recirculating hydro and drip or drain-to-waste systems, and it is always mixed in equal parts with Veg B. The 5-gallon jug suits growers running several reservoirs or a dosing setup.
Guaranteed analysis: 5-0-0.3
Derived from: ammonium calcium nitrate, potassium nitrate, iron EDTA, copper EDTA, manganese EDTA, sodium molybdate, sodium borate, zinc EDTA
Mix 2–5 mL per gallon (0.5–1 mL per gallon for seedlings and cuttings) and adjust to pH 5.8
Always use equal parts Veg A and Veg B
Follow the Cultured Solutions Recirculating Hydro Feeding Schedule for RDWC, DWC, NFT and aeroponics, or the Drain to Waste schedule for rockwool, coco and soilless
Recommended starting EC of source water: 0–20 ppm
Shake well before use; store in a cool, dark place
Size: 5 gallons
Cultured Solutions Coco Cal is a concentrated calcium and magnesium supplement from Current Culture H2O. It is formulated to help fast-growing plants avoid secondary nutrient deficiencies and is fed alongside the Cultured Solutions base nutrients in hydro, coco and other soilless systems. The 55-gallon drum is sized for commercial grow rooms and nutrient injection systems.
Guaranteed analysis: 2-0-0
Derived from: calcium nitrate, calcium sulfate, magnesium nitrate, iron EDTA
Mix 2–5 mL per gallon (0.5–1 mL per gallon for seedlings and cuttings) and adjust to pH 5.8
Follow the Cultured Solutions Recirculating Hydro Feeding Schedule for RDWC, DWC, NFT and aeroponics, or the Drain to Waste schedule for rockwool, coco and soilless
Recommended starting EC of source water: 0–20 ppm
Shake well before use; store in a cool, dark place
Size: 55 gallons
Cultured Solutions Coco Cal is a concentrated calcium and magnesium supplement from Current Culture H2O. It is formulated to help fast-growing plants avoid secondary nutrient deficiencies and is fed alongside the Cultured Solutions base nutrients in hydro, coco and other soilless systems. The 5-gallon jug suits growers running several reservoirs or a dosing setup.
Guaranteed analysis: 2-0-0
Derived from: calcium nitrate, calcium sulfate, magnesium nitrate, iron EDTA
Mix 2–5 mL per gallon (0.5–1 mL per gallon for seedlings and cuttings) and adjust to pH 5.8
Follow the Cultured Solutions Recirculating Hydro Feeding Schedule for RDWC, DWC, NFT and aeroponics, or the Drain to Waste schedule for rockwool, coco and soilless
Recommended starting EC of source water: 0–20 ppm
Shake well before use; store in a cool, dark place
Size: 5 gallons
