BLOOM A&B SNOOPS PREMIUM NUTRIENTS To reach their full potential, flowering plants require more cations than anions. SNOOP’S PREMIUM BLOOM A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the bloom phase increasing your crop’s ability to bloom productively. Providing your plants with proper nutrition assists them in reaching their full potential. Now your crops can achieve a PREMIUM Bloom. BLOOM A&B – THE SCIENCE When flowering plants need and will take more Potassium (K+). K+ is a positive ion (cation). To take in a positive ion a plant has to release a proton (+). This proton when released into water will add a positive load creating a Hydrogen (H+) particle. This H+ particle will bring the pH down in the rootzone/substrate. A flowering plant acidifies the substrate. There is also NH4 in the Bloom recipe to regulate the internal pH of the substrate as the up take of K+ on its own does not release enough H+ particles to keep the pH optimum. The remaining Nitrogen needed for making amino acids to build the flowers is given in the form of the anion nitrate (NO− 3). When a plant uptakes NO− 3 an electron (−) is released into water adding a negative load which creates a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. Also other cations like Calcium (Ca2+) and Magnesium (Mg2+) are decreased to the right amount to make sure the plant gets the correct level of K+ it needs in order to allow flowers to reach their full potential. Flowering plants which acidify the substrate too much can create an absorption problem of most nutrient elements. Early autumn colouring in the leaves is often the result. DIRECTIONS Fill the feed tank with water. Shake bottle well before use. Add 14ml of Grow A per gallon of water (3.5ml per litre) and mix well. Then add 14ml of Grow B per gallon of water (3.5ml per litre) and mix well. This will give an approximate EC of 2.0 (1400ppm). Adjust pH as required. – Always use an equal amount of Bloom A and Bloom B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific. AVAILABLE IN: 1L, 5L, 10L & 20L. VARIANTS: Hydro, Coco, Soil
BLOOM A&B SNOOPS PREMIUM NUTRIENTS To reach their full potential, flowering plants require more cations than anions. SNOOP’S PREMIUM BLOOM A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the bloom phase increasing your crop’s ability to bloom productively. Providing your plants with proper nutrition assists them in reaching their full potential. Now your crops can achieve a PREMIUM Bloom. BLOOM A&B – THE SCIENCE When flowering plants need and will take more Potassium (K+). K+ is a positive ion (cation). To take in a positive ion a plant has to release a proton (+). This proton when released into water will add a positive load creating a Hydrogen (H+) particle. This H+ particle will bring the pH down in the rootzone/substrate. A flowering plant acidifies the substrate. There is also NH4 in the Bloom recipe to regulate the internal pH of the substrate as the up take of K+ on its own does not release enough H+ particles to keep the pH optimum. The remaining Nitrogen needed for making amino acids to build the flowers is given in the form of the anion nitrate (NO− 3). When a plant uptakes NO− 3 an electron (−) is released into water adding a negative load which creates a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. Also other cations like Calcium (Ca2+) and Magnesium (Mg2+) are decreased to the right amount to make sure the plant gets the correct level of K+ it needs in order to allow flowers to reach their full potential. Flowering plants which acidify the substrate too much can create an absorption problem of most nutrient elements. Early autumn colouring in the leaves is often the result. DIRECTIONS Fill the feed tank with water. Shake bottle well before use. Add 14ml of Grow A per gallon of water (3.5ml per litre) and mix well. Then add 14ml of Grow B per gallon of water (3.5ml per litre) and mix well. This will give an approximate EC of 2.0 (1400ppm). Adjust pH as required. – Always use an equal amount of Bloom A and Bloom B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific. AVAILABLE IN: 1L, 5L, 10L & 20L. VARIANTS: Hydro, Coco, Soil
BLOOM A&B SNOOPS PREMIUM NUTRIENTS To reach their full potential, flowering plants require more cations than anions. SNOOP’S PREMIUM BLOOM A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the bloom phase increasing your crop’s ability to bloom productively. Providing your plants with proper nutrition assists them in reaching their full potential. Now your crops can achieve a PREMIUM Bloom. BLOOM A&B – THE SCIENCE When flowering plants need and will take more Potassium (K+). K+ is a positive ion (cation). To take in a positive ion a plant has to release a proton (+). This proton when released into water will add a positive load creating a Hydrogen (H+) particle. This H+ particle will bring the pH down in the rootzone/substrate. A flowering plant acidifies the substrate. There is also NH4 in the Bloom recipe to regulate the internal pH of the substrate as the up take of K+ on its own does not release enough H+ particles to keep the pH optimum. The remaining Nitrogen needed for making amino acids to build the flowers is given in the form of the anion nitrate (NO− 3). When a plant uptakes NO− 3 an electron (−) is released into water adding a negative load which creates a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. Also other cations like Calcium (Ca2+) and Magnesium (Mg2+) are decreased to the right amount to make sure the plant gets the correct level of K+ it needs in order to allow flowers to reach their full potential. Flowering plants which acidify the substrate too much can create an absorption problem of most nutrient elements. Early autumn colouring in the leaves is often the result. DIRECTIONS Fill the feed tank with water. Shake bottle well before use. Add 14ml of Grow A per gallon of water (3.5ml per litre) and mix well. Then add 14ml of Grow B per gallon of water (3.5ml per litre) and mix well. This will give an approximate EC of 2.0 (1400ppm). Adjust pH as required. – Always use an equal amount of Bloom A and Bloom B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific. AVAILABLE IN: 1L, 5L, 10L & 20L. VARIANTS: Hydro, Coco, Soil
BLOOM A&B SNOOPS PREMIUM NUTRIENTS To reach their full potential, flowering plants require more cations than anions. SNOOP’S PREMIUM BLOOM A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the bloom phase increasing your crop’s ability to bloom productively. Providing your plants with proper nutrition assists them in reaching their full potential. Now your crops can achieve a PREMIUM Bloom. BLOOM A&B – THE SCIENCE When flowering plants need and will take more Potassium (K+). K+ is a positive ion (cation). To take in a positive ion a plant has to release a proton (+). This proton when released into water will add a positive load creating a Hydrogen (H+) particle. This H+ particle will bring the pH down in the rootzone/substrate. A flowering plant acidifies the substrate. There is also NH4 in the Bloom recipe to regulate the internal pH of the substrate as the up take of K+ on its own does not release enough H+ particles to keep the pH optimum. The remaining Nitrogen needed for making amino acids to build the flowers is given in the form of the anion nitrate (NO− 3). When a plant uptakes NO− 3 an electron (−) is released into water adding a negative load which creates a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. Also other cations like Calcium (Ca2+) and Magnesium (Mg2+) are decreased to the right amount to make sure the plant gets the correct level of K+ it needs in order to allow flowers to reach their full potential. Flowering plants which acidify the substrate too much can create an absorption problem of most nutrient elements. Early autumn colouring in the leaves is often the result. DIRECTIONS Fill the feed tank with water. Shake bottle well before use. Add 14ml of Grow A per gallon of water (3.5ml per litre) and mix well. Then add 14ml of Grow B per gallon of water (3.5ml per litre) and mix well. This will give an approximate EC of 2.0 (1400ppm). Adjust pH as required. – Always use an equal amount of Bloom A and Bloom B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific. AVAILABLE IN: 1L, 5L, 10L & 20L. VARIANTS: Hydro, Coco, Soil
BLOOM A&B SNOOPS PREMIUM NUTRIENTS To reach their full potential, flowering plants require more cations than anions. SNOOP’S PREMIUM BLOOM A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the bloom phase increasing your crop’s ability to bloom productively. Providing your plants with proper nutrition assists them in reaching their full potential. Now your crops can achieve a PREMIUM Bloom. BLOOM A&B – THE SCIENCE When flowering plants need and will take more Potassium (K+). K+ is a positive ion (cation). To take in a positive ion a plant has to release a proton (+). This proton when released into water will add a positive load creating a Hydrogen (H+) particle. This H+ particle will bring the pH down in the rootzone/substrate. A flowering plant acidifies the substrate. There is also NH4 in the Bloom recipe to regulate the internal pH of the substrate as the up take of K+ on its own does not release enough H+ particles to keep the pH optimum. The remaining Nitrogen needed for making amino acids to build the flowers is given in the form of the anion nitrate (NO− 3). When a plant uptakes NO− 3 an electron (−) is released into water adding a negative load which creates a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. Also other cations like Calcium (Ca2+) and Magnesium (Mg2+) are decreased to the right amount to make sure the plant gets the correct level of K+ it needs in order to allow flowers to reach their full potential. Flowering plants which acidify the substrate too much can create an absorption problem of most nutrient elements. Early autumn colouring in the leaves is often the result. DIRECTIONS Fill the feed tank with water. Shake bottle well before use. Add 14ml of Grow A per gallon of water (3.5ml per litre) and mix well. Then add 14ml of Grow B per gallon of water (3.5ml per litre) and mix well. This will give an approximate EC of 2.0 (1400ppm). Adjust pH as required. – Always use an equal amount of Bloom A and Bloom B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific. AVAILABLE IN: 1L, 5L, 10L & 20L. VARIANTS: Hydro, Coco, Soil
BLOOM A&B SNOOPS PREMIUM NUTRIENTS To reach their full potential, flowering plants require more cations than anions. SNOOP’S PREMIUM BLOOM A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the bloom phase increasing your crop’s ability to bloom productively. Providing your plants with proper nutrition assists them in reaching their full potential. Now your crops can achieve a PREMIUM Bloom. BLOOM A&B – THE SCIENCE When flowering plants need and will take more Potassium (K+). K+ is a positive ion (cation). To take in a positive ion a plant has to release a proton (+). This proton when released into water will add a positive load creating a Hydrogen (H+) particle. This H+ particle will bring the pH down in the rootzone/substrate. A flowering plant acidifies the substrate. There is also NH4 in the Bloom recipe to regulate the internal pH of the substrate as the up take of K+ on its own does not release enough H+ particles to keep the pH optimum. The remaining Nitrogen needed for making amino acids to build the flowers is given in the form of the anion nitrate (NO− 3). When a plant uptakes NO− 3 an electron (−) is released into water adding a negative load which creates a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. Also other cations like Calcium (Ca2+) and Magnesium (Mg2+) are decreased to the right amount to make sure the plant gets the correct level of K+ it needs in order to allow flowers to reach their full potential. Flowering plants which acidify the substrate too much can create an absorption problem of most nutrient elements. Early autumn colouring in the leaves is often the result. DIRECTIONS Fill the feed tank with water. Shake bottle well before use. Add 14ml of Grow A per gallon of water (3.5ml per litre) and mix well. Then add 14ml of Grow B per gallon of water (3.5ml per litre) and mix well. This will give an approximate EC of 2.0 (1400ppm). Adjust pH as required. – Always use an equal amount of Bloom A and Bloom B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific. AVAILABLE IN: 1L, 5L, 10L & 20L. VARIANTS: Hydro, Coco, Soil
BLOOM A&B SNOOPS PREMIUM NUTRIENTS To reach their full potential, flowering plants require more cations than anions. SNOOP’S PREMIUM BLOOM A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the bloom phase increasing your crop’s ability to bloom productively. Providing your plants with proper nutrition assists them in reaching their full potential. Now your crops can achieve a PREMIUM Bloom. BLOOM A&B – THE SCIENCE When flowering plants need and will take more Potassium (K+). K+ is a positive ion (cation). To take in a positive ion a plant has to release a proton (+). This proton when released into water will add a positive load creating a Hydrogen (H+) particle. This H+ particle will bring the pH down in the rootzone/substrate. A flowering plant acidifies the substrate. There is also NH4 in the Bloom recipe to regulate the internal pH of the substrate as the up take of K+ on its own does not release enough H+ particles to keep the pH optimum. The remaining Nitrogen needed for making amino acids to build the flowers is given in the form of the anion nitrate (NO− 3). When a plant uptakes NO− 3 an electron (−) is released into water adding a negative load which creates a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. Also other cations like Calcium (Ca2+) and Magnesium (Mg2+) are decreased to the right amount to make sure the plant gets the correct level of K+ it needs in order to allow flowers to reach their full potential. Flowering plants which acidify the substrate too much can create an absorption problem of most nutrient elements. Early autumn colouring in the leaves is often the result. DIRECTIONS Fill the feed tank with water. Shake bottle well before use. Add 14ml of Grow A per gallon of water (3.5ml per litre) and mix well. Then add 14ml of Grow B per gallon of water (3.5ml per litre) and mix well. This will give an approximate EC of 2.0 (1400ppm). Adjust pH as required. – Always use an equal amount of Bloom A and Bloom B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific. AVAILABLE IN: 1L, 5L, 10L & 20L. VARIANTS: Hydro, Coco, Soil
BLOOM A&B SNOOPS PREMIUM NUTRIENTS To reach their full potential, flowering plants require more cations than anions. SNOOP’S PREMIUM BLOOM A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the bloom phase increasing your crop’s ability to bloom productively. Providing your plants with proper nutrition assists them in reaching their full potential. Now your crops can achieve a PREMIUM Bloom. BLOOM A&B – THE SCIENCE When flowering plants need and will take more Potassium (K+). K+ is a positive ion (cation). To take in a positive ion a plant has to release a proton (+). This proton when released into water will add a positive load creating a Hydrogen (H+) particle. This H+ particle will bring the pH down in the rootzone/substrate. A flowering plant acidifies the substrate. There is also NH4 in the Bloom recipe to regulate the internal pH of the substrate as the up take of K+ on its own does not release enough H+ particles to keep the pH optimum. The remaining Nitrogen needed for making amino acids to build the flowers is given in the form of the anion nitrate (NO− 3). When a plant uptakes NO− 3 an electron (−) is released into water adding a negative load which creates a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. Also other cations like Calcium (Ca2+) and Magnesium (Mg2+) are decreased to the right amount to make sure the plant gets the correct level of K+ it needs in order to allow flowers to reach their full potential. Flowering plants which acidify the substrate too much can create an absorption problem of most nutrient elements. Early autumn colouring in the leaves is often the result. DIRECTIONS Fill the feed tank with water. Shake bottle well before use. Add 14ml of Grow A per gallon of water (3.5ml per litre) and mix well. Then add 14ml of Grow B per gallon of water (3.5ml per litre) and mix well. This will give an approximate EC of 2.0 (1400ppm). Adjust pH as required. – Always use an equal amount of Bloom A and Bloom B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific. AVAILABLE IN: 1L, 5L, 10L & 20L. VARIANTS: Hydro, Coco, Soil
BLOOM A&B SNOOPS PREMIUM NUTRIENTS To reach their full potential, flowering plants require more cations than anions. SNOOP’S PREMIUM BLOOM A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the bloom phase increasing your crop’s ability to bloom productively. Providing your plants with proper nutrition assists them in reaching their full potential. Now your crops can achieve a PREMIUM Bloom. BLOOM A&B – THE SCIENCE When flowering plants need and will take more Potassium (K+). K+ is a positive ion (cation). To take in a positive ion a plant has to release a proton (+). This proton when released into water will add a positive load creating a Hydrogen (H+) particle. This H+ particle will bring the pH down in the rootzone/substrate. A flowering plant acidifies the substrate. There is also NH4 in the Bloom recipe to regulate the internal pH of the substrate as the up take of K+ on its own does not release enough H+ particles to keep the pH optimum. The remaining Nitrogen needed for making amino acids to build the flowers is given in the form of the anion nitrate (NO− 3). When a plant uptakes NO− 3 an electron (−) is released into water adding a negative load which creates a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. Also other cations like Calcium (Ca2+) and Magnesium (Mg2+) are decreased to the right amount to make sure the plant gets the correct level of K+ it needs in order to allow flowers to reach their full potential. Flowering plants which acidify the substrate too much can create an absorption problem of most nutrient elements. Early autumn colouring in the leaves is often the result. DIRECTIONS Fill the feed tank with water. Shake bottle well before use. Add 14ml of Grow A per gallon of water (3.5ml per litre) and mix well. Then add 14ml of Grow B per gallon of water (3.5ml per litre) and mix well. This will give an approximate EC of 2.0 (1400ppm). Adjust pH as required. – Always use an equal amount of Bloom A and Bloom B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific. AVAILABLE IN: 1L, 5L, 10L & 20L. VARIANTS: Hydro, Coco, Soil
BLOOM A&B SNOOPS PREMIUM NUTRIENTS To reach their full potential, flowering plants require more cations than anions. SNOOP’S PREMIUM BLOOM A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the bloom phase increasing your crop’s ability to bloom productively. Providing your plants with proper nutrition assists them in reaching their full potential. Now your crops can achieve a PREMIUM Bloom. BLOOM A&B – THE SCIENCE When flowering plants need and will take more Potassium (K+). K+ is a positive ion (cation). To take in a positive ion a plant has to release a proton (+). This proton when released into water will add a positive load creating a Hydrogen (H+) particle. This H+ particle will bring the pH down in the rootzone/substrate. A flowering plant acidifies the substrate. There is also NH4 in the Bloom recipe to regulate the internal pH of the substrate as the up take of K+ on its own does not release enough H+ particles to keep the pH optimum. The remaining Nitrogen needed for making amino acids to build the flowers is given in the form of the anion nitrate (NO− 3). When a plant uptakes NO− 3 an electron (−) is released into water adding a negative load which creates a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. Also other cations like Calcium (Ca2+) and Magnesium (Mg2+) are decreased to the right amount to make sure the plant gets the correct level of K+ it needs in order to allow flowers to reach their full potential. Flowering plants which acidify the substrate too much can create an absorption problem of most nutrient elements. Early autumn colouring in the leaves is often the result. DIRECTIONS Fill the feed tank with water. Shake bottle well before use. Add 14ml of Grow A per gallon of water (3.5ml per litre) and mix well. Then add 14ml of Grow B per gallon of water (3.5ml per litre) and mix well. This will give an approximate EC of 2.0 (1400ppm). Adjust pH as required. – Always use an equal amount of Bloom A and Bloom B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific. AVAILABLE IN: 1L, 5L, 10L & 20L. VARIANTS: Hydro, Coco, Soil
BLOOM A&B SNOOPS PREMIUM NUTRIENTS To reach their full potential, flowering plants require more cations than anions. SNOOP’S PREMIUM BLOOM A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the bloom phase increasing your crop’s ability to bloom productively. Providing your plants with proper nutrition assists them in reaching their full potential. Now your crops can achieve a PREMIUM Bloom. BLOOM A&B – THE SCIENCE When flowering plants need and will take more Potassium (K+). K+ is a positive ion (cation). To take in a positive ion a plant has to release a proton (+). This proton when released into water will add a positive load creating a Hydrogen (H+) particle. This H+ particle will bring the pH down in the rootzone/substrate. A flowering plant acidifies the substrate. There is also NH4 in the Bloom recipe to regulate the internal pH of the substrate as the up take of K+ on its own does not release enough H+ particles to keep the pH optimum. The remaining Nitrogen needed for making amino acids to build the flowers is given in the form of the anion nitrate (NO− 3). When a plant uptakes NO− 3 an electron (−) is released into water adding a negative load which creates a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. Also other cations like Calcium (Ca2+) and Magnesium (Mg2+) are decreased to the right amount to make sure the plant gets the correct level of K+ it needs in order to allow flowers to reach their full potential. Flowering plants which acidify the substrate too much can create an absorption problem of most nutrient elements. Early autumn colouring in the leaves is often the result. DIRECTIONS Fill the feed tank with water. Shake bottle well before use. Add 14ml of Grow A per gallon of water (3.5ml per litre) and mix well. Then add 14ml of Grow B per gallon of water (3.5ml per litre) and mix well. This will give an approximate EC of 2.0 (1400ppm). Adjust pH as required. – Always use an equal amount of Bloom A and Bloom B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific. AVAILABLE IN: 1L, 5L, 10L & 20L. VARIANTS: Hydro, Coco, Soil
BLOOM A&B SNOOPS PREMIUM NUTRIENTS To reach their full potential, flowering plants require more cations than anions. SNOOP’S PREMIUM BLOOM A&B has been specifically formulated to provide your plants with the ideal proportion of nutrients for the bloom phase increasing your crop’s ability to bloom productively. Providing your plants with proper nutrition assists them in reaching their full potential. Now your crops can achieve a PREMIUM Bloom. BLOOM A&B – THE SCIENCE When flowering plants need and will take more Potassium (K+). K+ is a positive ion (cation). To take in a positive ion a plant has to release a proton (+). This proton when released into water will add a positive load creating a Hydrogen (H+) particle. This H+ particle will bring the pH down in the rootzone/substrate. A flowering plant acidifies the substrate. There is also NH4 in the Bloom recipe to regulate the internal pH of the substrate as the up take of K+ on its own does not release enough H+ particles to keep the pH optimum. The remaining Nitrogen needed for making amino acids to build the flowers is given in the form of the anion nitrate (NO− 3). When a plant uptakes NO− 3 an electron (−) is released into water adding a negative load which creates a hydroxide (OH−) particle. This OH− particle will bring the pH up in the root zone/substrate. Also other cations like Calcium (Ca2+) and Magnesium (Mg2+) are decreased to the right amount to make sure the plant gets the correct level of K+ it needs in order to allow flowers to reach their full potential. Flowering plants which acidify the substrate too much can create an absorption problem of most nutrient elements. Early autumn colouring in the leaves is often the result. DIRECTIONS Fill the feed tank with water. Shake bottle well before use. Add 14ml of Grow A per gallon of water (3.5ml per litre) and mix well. Then add 14ml of Grow B per gallon of water (3.5ml per litre) and mix well. This will give an approximate EC of 2.0 (1400ppm). Adjust pH as required. – Always use an equal amount of Bloom A and Bloom B. – Water temperature affects EC/ppm. – To avoid false readings set water temperature to 68°F. – Store out of direct light. For guidance only. Precise EC/ppm levels are plant/environment specific. AVAILABLE IN: 1L, 5L, 10L & 20L. VARIANTS: Hydro, Coco, Soil
What is HYGROZYME Liquid Nutrient A & B?
Nutrient A & B is a two-component fertilizer system developed for all grow media. It is a complete nutrient solution that contains the necessary primary, secondary, and micronutrients required for the healthy development of your plants.This fertilizer system can be used for indoor and outdoor applications on plants such as vegetables, fruits, and flowers.
How do Liquid Nutrient A & B work?
Nutrient A & B are made into two separate bottles – Nutrient A and Nutrient B, so the solutions can be provided in a concentrated form.
Why should I choose Hygrozyme?
The two parts contain all your nutrient and micronutrient needs.
Comprehensive nutrient profile.
Highest quality inputs.
Effective in all grow media and growth stages.
Formula includes a high-quality seaweed extract.
We stand apart by integrating sustainable practices into every aspect of our operations. By embracing eco-friendly manufacturing processes and ingredients, we prioritize the long-term health of our environment without compromising product excellence. Our solutions empower growers and cultivators to achieve remarkable results while minimizing their ecological footprint.
With our extensive expertise, cutting-edge research and development capabilities, and state-of-the-art laboratory, we deliver exceptional formulations that consistently surpass customer expectations.
What is HYGROZYME Liquid Nutrient A & B?
Nutrient A & B is a two-component fertilizer system developed for all grow media. It is a complete nutrient solution that contains the necessary primary, secondary, and micronutrients required for the healthy development of your plants.This fertilizer system can be used for indoor and outdoor applications on plants such as vegetables, fruits, and flowers.
How do Liquid Nutrient A & B work?
Nutrient A & B are made into two separate bottles – Nutrient A and Nutrient B, so the solutions can be provided in a concentrated form.
Why should I choose Hygrozyme?
The two parts contain all your nutrient and micronutrient needs.
Comprehensive nutrient profile.
Highest quality inputs.
Effective in all grow media and growth stages.
Formula includes a high-quality seaweed extract.
We stand apart by integrating sustainable practices into every aspect of our operations. By embracing eco-friendly manufacturing processes and ingredients, we prioritize the long-term health of our environment without compromising product excellence. Our solutions empower growers and cultivators to achieve remarkable results while minimizing their ecological footprint.
With our extensive expertise, cutting-edge research and development capabilities, and state-of-the-art laboratory, we deliver exceptional formulations that consistently surpass customer expectations.
What is Hygrozyme Concentrate?
Designed with larger growers in mind, Hygrozyme Concentrate is 5X more concentrated than our original and sought-after Hygrozyme formula: A powerful blend of beneficial enzymes specifically formulated to prevent root rot by accelerating the breakdown of dead root matter—a process that unlocks essential nutrients for your plants.
Why should I choose Hygrozyme Concentrate?
“Wow, just wow! I run DWC and the roots were giving me issues. The product you sent changed everything. I’m definitely buying it. It’s a game changer.”—JoeHygrozyme meets all registration requirements for sales and use and—to ensure full satisfaction and 100% guaranteed results—is manufactured in an ISO 9001 certified production facility. (Highest quality and consistency in every bottle!)
Learn more about the ISO Quality Management System here.
All ingredients in Hygrozyme Concentrate are natural and formulated to work within the optimal temperature and pH range of your crop.Active Ingredients:Cellulase 5,000 u/ml Xylanase 500 u/ml Hemicellulase 375 u/ml Beta-Glucanase 200 u/ml
How does Hygrozyme Concentrate work?
Let us explain to you in less than 3 minutes!
Product Effectiveness Test
If you are not convinced yet, this video will show you the effectiveness of Hygrozyme against other enzyme formulas in the market. The tissue test is just one of the ways to determine if your product has the right enzymes (cellulase) to break down dead root matter and, if it does, how effective it will be at catalyzing the biochemical reaction. The higher the amount of cellulase in the product, the faster and more effective the product will be. (Do you want to try it at home? Request a Tissue Test kit here!)
What is Hygrozyme?
A powerful blend of concentrated, beneficial enzymes specifically formulated to prevent root rot by accelerating the breakdown of dead root matter—a process that unlocks essential nutrients for your plants.
Why should I choose Hygrozyme?
“Wow, just wow! I run DWC and the roots were giving me issues. The product you sent changed everything. I’m definitely buying it. It’s a game changer.”—JoeHygrozyme meets all registration requirements for sales and use and—to ensure full satisfaction and 100% guaranteed results—is manufactured in an ISO 9001 certified production facility. (Highest quality and consistency in every bottle!)
Learn more about the ISO Quality Management System here.
All ingredients in Hygrozyme are natural and formulated to work within the optimal temperature and pH range of your crop.Active Ingredients:Cellulase 1,000 u/ml Xylanase 100 u/ml Hemicellulase 75 u/ml Beta-Glucanase 40 u/ml
How does Hygrozyme work?
Let us explain to you in less than 3 minutes!
Product Effectiveness Test
If you are not convinced yet, this video will show you the effectiveness of Hygrozyme against other enzyme formulas in the market. The tissue test is just one of the ways to determine if your product has the right enzymes (cellulase) to break down dead root matter and, if it does, how effective it will be at catalyzing the biochemical reaction. The higher the amount of cellulase in the product, the faster and more effective the product will be. (Do you want to try it at home? Request a Tissue Test kit here!)
What is Hygrozyme?
A powerful blend of concentrated, beneficial enzymes specifically formulated to prevent root rot by accelerating the breakdown of dead root matter—a process that unlocks essential nutrients for your plants.
Why should I choose Hygrozyme?
“Wow, just wow! I run DWC and the roots were giving me issues. The product you sent changed everything. I’m definitely buying it. It’s a game changer.”—JoeHygrozyme meets all registration requirements for sales and use and—to ensure full satisfaction and 100% guaranteed results—is manufactured in an ISO 9001 certified production facility. (Highest quality and consistency in every bottle!)
Learn more about the ISO Quality Management System here.
All ingredients in Hygrozyme are natural and formulated to work within the optimal temperature and pH range of your crop.Active Ingredients:Cellulase 1,000 u/ml Xylanase 100 u/ml Hemicellulase 75 u/ml Beta-Glucanase 40 u/ml
How does Hygrozyme work?
Let us explain to you in less than 3 minutes!
Product Effectiveness Test
If you are not convinced yet, this video will show you the effectiveness of Hygrozyme against other enzyme formulas in the market. The tissue test is just one of the ways to determine if your product has the right enzymes (cellulase) to break down dead root matter and, if it does, how effective it will be at catalyzing the biochemical reaction. The higher the amount of cellulase in the product, the faster and more effective the product will be. (Do you want to try it at home? Request a Tissue Test kit here!)
What is Hygroben?
Hygroben is a microbial root inoculant composed of 5 different bacillus species that are shown to be physiologically compatible with each other and work together to enhance yield.
Why should I choose Hygroben?
Hygroben meets all registration requirements for sales and use and—to ensure full satisfaction and 100% guaranteed results—is manufactured in an ISO 9001 certified production facility. (Highest quality and consistency in every bottle!)
Learn more about the ISO Quality Management System here.
All ingredients in Hygroben are natural and are suitable for ornamentals, vegetable, flowering plants, etc.
Active Ingredients:Bacillus licheniformis 1.0 x 108 CFU/mL, Bacillus subtilis 1.0 x 108 CFU/mL, Bacillus pumilus 5.0 x 107 CFU/mL, Bacillus amyloliquefaciens 5.0 x 107 CFU/mL, Bacillus megaterium 5.0 x 107 CFU/mL
How does Hygrozyme work?
This is why HYGROBEN is HYGROZYME's best flower! HYGROZYME contains a proprietary formula that feeds the beneficial microbes present in the HYGROBEN, supercharging the root zone and resulting in higher yield potential!
What is Hygroben?
Hygroben is a microbial root inoculant composed of 5 different bacillus species that are shown to be physiologically compatible with each other and work together to enhance yield.
Why should I choose Hygroben?
Hygroben meets all registration requirements for sales and use and—to ensure full satisfaction and 100% guaranteed results—is manufactured in an ISO 9001 certified production facility. (Highest quality and consistency in every bottle!)
Learn more about the ISO Quality Management System here.
All ingredients in Hygroben are natural and are suitable for ornamentals, vegetable, flowering plants, etc.
Active Ingredients:Bacillus licheniformis 1.0 x 108 CFU/mL, Bacillus subtilis 1.0 x 108 CFU/mL, Bacillus pumilus 5.0 x 107 CFU/mL, Bacillus amyloliquefaciens 5.0 x 107 CFU/mL, Bacillus megaterium 5.0 x 107 CFU/mL
How does Hygrozyme work?
This is why HYGROBEN is HYGROZYME's best flower! HYGROZYME contains a proprietary formula that feeds the beneficial microbes present in the HYGROBEN, supercharging the root zone and resulting in higher yield potential!
During 12/12 flower cycles, switch to SiLICIUM Bloom in efforts to promote larger flowers and fruits as well as regulate “salt stress” caused from excess K/Na molecules. The ancillary effect of monosilicic acid and fulvic agents encourage the facilitation of phosphorous and calcium, but also simultaneously reduce toxicity of heavy metals, aluminum, and manganese within the plant system. Formulated specifically for budding and fruiting cycles, SiLICIUM Bloom provides silicon in the conjunctional form serving as a biological chelate.
SiLICIUM mono-silicic acid also ensures that the plant stomata diameter is decreased, which helps regulates moisture loss thereby enhancing the mobility of various macro and micro nutritional elements throughout the crop.
Increased resistance and protection against diseases.
Protection against diseases, drought, heat and other environmental stressors during vegetative and budding development.
SiLICIUM mono-silicic acid also ensures that the plant stomata diameter is decreased.
Dosage
Use a minimum of 15mL per 100 Liters OR .5ML per 1 gal of feeding water throughout the growing cycle.
ALWAYS mix SiLICIUM with Tap or RO water before any other nutrients.
During 12/12 flower cycles, switch to SiLICIUM Bloom in efforts to promote larger flowers and fruits as well as regulate “salt stress” caused from excess K/Na molecules. The ancillary effect of monosilicic acid and fulvic agents encourage the facilitation of phosphorous and calcium, but also simultaneously reduce toxicity of heavy metals, aluminum, and manganese within the plant system. Formulated specifically for budding and fruiting cycles, SiLICIUM Bloom provides silicon in the conjunctional form serving as a biological chelate.
SiLICIUM mono-silicic acid also ensures that the plant stomata diameter is decreased, which helps regulates moisture loss thereby enhancing the mobility of various macro and micro nutritional elements throughout the crop.
Increased resistance and protection against diseases.
Protection against diseases, drought, heat and other environmental stressors during vegetative and budding development.
SiLICIUM mono-silicic acid also ensures that the plant stomata diameter is decreased.
Dosage
Use a minimum of 15mL per 100 Liters OR .5ML per 1 gal of feeding water throughout the growing cycle.
ALWAYS mix SiLICIUM with Tap or RO water before any other nutrients.
SiLICIUM is beneficial for the regulation and the absorption of macro and micronutrients by the plant via xylem to the shoots and leaves. Silicon is translocated as anion, monosilicic acid, resulting as a silicon-cellulose membrane throughout the epidermal tissue. Found to have association with phosphorous and calcium ions, this process in which plant biomass enriches its level of silicon is called monosilicic acid polymerization.
The application of SiLICIUM through the root system results in increased resistance and protection against diseases, drought, heat and other environmental stressors during vegetative and budding development. Using SiLicium, your plants will root faster and develop stronger stems, leaves and plant biomass overall.
Silicon Rich structure increases the transport of calcium, phosphorus and other essential elements.
Tighter node stacking results in more flowering sites.
Accelerated growth rates occur from enhanced cellular structure within the plant.
Dosage
Use a minimum of 15mL per 100 Liters OR .5ML per 1 gal of feeding water throughout the growing cycle.
ALWAYS mix SiLICIUM with Tap or RO water before any other nutrients.
SiLICIUM is beneficial for the regulation and the absorption of macro and micronutrients by the plant via xylem to the shoots and leaves. Silicon is translocated as anion, monosilicic acid, resulting as a silicon-cellulose membrane throughout the epidermal tissue. Found to have association with phosphorous and calcium ions, this process in which plant biomass enriches its level of silicon is called monosilicic acid polymerization.
The application of SiLICIUM through the root system results in increased resistance and protection against diseases, drought, heat and other environmental stressors during vegetative and budding development. Using SiLicium, your plants will root faster and develop stronger stems, leaves and plant biomass overall.
Silicon Rich structure increases the transport of calcium, phosphorus and other essential elements.
Tighter node stacking results in more flowering sites.
Accelerated growth rates occur from enhanced cellular structure within the plant.
Dosage
Use a minimum of 15mL per 100 Liters OR .5ML per 1 gal of feeding water throughout the growing cycle.
ALWAYS mix SiLICIUM with Tap or RO water before any other nutrients.
SiLICIUM is beneficial for the regulation and the absorption of macro and micronutrients by the plant via xylem to the shoots and leaves. Silicon is translocated as anion, monosilicic acid, resulting as a silicon-cellulose membrane throughout the epidermal tissue. Found to have association with phosphorous and calcium ions, this process in which plant biomass enriches its level of silicon is called monosilicic acid polymerization.
The application of SiLICIUM through the root system results in increased resistance and protection against diseases, drought, heat and other environmental stressors during vegetative and budding development. Using SiLICIUM, your plants will root faster and develop stronger stems, leaves and plant biomass overall.
Silicon Rich structure increases the transport of calcium, phosphorus and other essential elements.
Tighter node stacking results in more flowering sites.
Accelerated growth rates occur from enhanced cellular structure within the plant.
Dosage
Use a minimum of 15mL per 100 Liters OR .5ML per 1 gal of feeding water throughout the growing cycle.
ALWAYS mix SiLICIUM with Tap or RO water before any other nutrients.
