Control is now in the palm of your hands. The Blite Minis remote gives you the ability to control your ballast from afar! You can use the remote to control the ballasts time function as well as wattage function! This remote is only compatible with part number 461009.Requires 2 AAA Battery's *NOT INCLUDED*
Introducing De.Lite Double Ended reflector. De.Lite comes pre-mounted with double ended sockets, and works with 1000W Interlux Double Ended lamps (and most other brands). With his sturdy steel housing and German aluminum hammertone reflective, this state-of-the-art reflector offers high efficient Double Ended Technology, De.Lite also comes pre-wired with a 15' cord and a standard ballast plug to work with most popular ballast brands. Side-effects include: Maximum vegetative growth & better flower yield. - Pre-mounted double ended sockets included - Works with 1000W Interlux Double ended lamps and most other brands. - Sturdy steel housing & German aluminum hammertone reflective. - Highly Efficient Double Ended Technology - Pre-wired 15’ cord with Standard ballast plug to work with most popular brand ballasts. Measurement: 18''x9.5''x5.5''
The Adjust-A-Wings Hellion DE has been meticulously crafted to produce the coolest and most even light distribution ever emitted from a DE reflector. Every Adjust-A-Wings Hellion incorporates a DE specific Super Spreader to allow for closer placement between lamp and plant canopy. DE lamps run much hotter than single ended lamps and the Super Spreader becomes a virtual necessity to diffuse and redirect DE lamp intensity (for ceiling heights below 2.5M). The Hellion custom designed lamp holders and 4 tab tension wires allow for 5 lamp height positions and 9 wing-width settings to enable perfect light turning over any area. Tests at 90CM above the canopy produce a highly consistent 350Par spread over an area of 1.2M x 1.2M, with leaf temperatures significantly reduced. For increase plant yield & flower consistency with any DE lamp (400W, 600W, 750W or 100W) insist on the Hellion and unleash the beast. Features: To suit all 400W, 600W 750W & 1000W DE lamps Greatly reduce leaf surface temperature Super-spreader included 5 lamp height positions 9 wing-width settings 12 months warranty
These easy to assemble reflectors are lightweight, economical, and provide a large footprint of light for your gardens. There are two models including either a mogul base, or double ended sockets, and each reflector comes with a 12' power cord. Available in singles or 8 packs. Dimensions: 32.5'' L x 26.25'' W x 7.75'' H
Introducing the Triple X2 Open DE Lamp Reflector. When it comes to cutting-edge DE technology, this high-quality, powder-coated steel giant has got your garden covered. With its wide angles and German aluminum reflector, there’s more than enough light to go around. Triple X2 uses efficient DE bulbs, offering increased light spectrum, improved lumen maintenance and accelerated warm up times. *Pre-mounted double ended sockets included *For use with 1000W and 600W HPS double ended lamps. *Sturdy steel housing & German aluminum hammertone reflective on all 4 sides *Large footprint with even light distribution *Louvered holes to help eliminate heat *Pre-wired 15’ cord with Standard ballast plug to work with most popular brand ballasts. 35", X 27.6", X 10.2''
Meet the newest member of our growing Lil' family of hood reflectors: Lil' Hood DE 1000/600W. With the sturdy steel housing, highly-reflective German aluminum and improved spectral efficiency of our Interlux double-ended bulb, this unit combines ultra intensity with maximum longevity. DE bulbs are more efficient than standard bulbs, offering increased light spectrum, improved lumen maintenance and accelerated warm up times. - Designed to work with InterLux 1000W HPS DE or 600W HPS DE High Performance Grow Lamps Part # 791000-D and 790600-D - Measurements: 20"x13.5''x7" *Side-effects include: Maximum vegetative growth & better flower yield.
Introducing the economical Grow1 Wing DE double ended reflector. Built with the same high-quality German aluminum as our Lil’ Hood& Triple X2, this durable, light-weight lamp offers the benefits of cutting-edge DE technology at a Grow1 price. Grow1 Wing DE uses efficient DE bulbs, offering increased light spectrum, improved lumen maintenance and accelerated warm up times. · Pre-mounted double ended sockets included · For use with 1000W and 600W HPS double ended lamps. · High quality German aluminum hammertone reflective material · Economical, Lightweight, and Durable · Solid construction with powder coated hanging plate · Pre-wired 15’ cord with Standard ballast plug to work with most popular brand ballasts. 18.5", X 14", X 6''
Features include... ADJUSTABLE SOCKET This incredibly unique design allows you to adjust the position of the socket both up and down and left and right to achieve optimum light reflectivity no matter what size bulb you use. HINGED GLASS & STEEL CLAMPS Flip down glass makes this reflector a breeze to use, and the new rubber seal and steel locking clamps ensure a secure, air-tight close. RETRACTABLE SUPPORT LINES This added safety feature helps prevent accidents and gives you more control during cleaning and bulb replacement. REFLECTIVE ALUMINUM This reflector features highly reflective hammertone aluminum on all 4 side walls to maximize light efficiency. Flanges: 8 inch Dimensions: 28.5''L x 25.5''W x 9.66''H Weight: 25LBS
The Adjust-A-Wings original design combines cutting edge science with biological beauty and simplicity to create a reflector system of unparalleled performance and versatility. The Adjust-A-Wings can be adjusted to wide settings and positioned incredibly close to plants for maximum light transferal (growing power) and area coverage. Alternately, the wings may be adjusted to more narrow settings and positioned further from the plants to suit the light and heat requirements of more sensitive plants or plant stages. The adjustable nature and even spread of the light foot print gives growers the unique ability to create seasonal (spring, summer, autumn) conditions indoors and efficiently trigger their plant's natural hormone cycles for faster growth, better health & maturity and major yield increase. Twice the Power and Efficiency of Most Other Reflectors Increase the Growing Area under each lamp by up to 75% Increase Yield per Lamp up to 50%. Reduce Heat, Save Power The “Adjustable Light Spread", allows Growers to create Ideal Lighting Conditions across All Stages of Plant Growth. Sold in 25 Countries across 4 Continents, Adjust -A- Wings are the “Reflectors of Choice", for many of the Worlds Top Growers! * Super spreader sold separately *Adjust-a-Wing Lamp socket w/ 15' cord INCLUDED Overall dimension at Widest Setting 70cm x 55cm (27.5" x 21.5")
No Glass, Non-Aircooled · Sturdy steel housing & aluminum hammertone reflective on all 4 side · Large footprint with even light distribution · Louvered holes to help eliminate heat · Accepts most standard E39 Base HID lamps from 250W-1500W · Works with both MH and HPS lamps · Pre-wired 15’ cord with Standard ballast plug to work with most popular brand ballasts. - Measurements: 35", x 27.6", x 10.2''
8" Air cooled Reflector - Air-Cooled with a flange to attach your ducting directly to the reflector. Designed specifically for the horticulture industry. With powder coated steel to ensure a long life. This high quality reflector can be used alone or in a line with many others. Connected by ducting to a sufficient fan this reflector will produce optimum results with cool and efficient operation. Comes with removable glass for easy cleaning Pre-installed lamp socket, 15' cord, and 2 hanging clips included. Hinged flip down glass for easing cleaning. Works with all wattage MH and HPS lamps. Completely assembled ready to use. - Lightweight - Hinged flip down glass - Durable - Works with MH and HPS - Works with 250w through 1000w - Measures 24"L x 20"W x 10"H - Sealed air-tight design - 8", Flange for duct connecting - Power coated steel - 4 corner reflective material
6" air cooled tube reflector- A reflector and cooling duct in one, this clear circular “Cool Tube", is the best of both worlds. Internal mounted highly reflective aluminum. Pyrex glass tube. Can be mounted horizontal or vertical. Stays extremely cool. Allows uniform light distribution. Works with 250w through 1000w wattage bulbs and ballast. MH and HPS compatible. Pre-installed lamp socket and 15' cord. Works with all wattage MH and HPS lamps. Completely assembled ready to use.
Features
Fully Pre-assembled
Pyrex Glass Tube
Air Flow Friendly
Compact
Economical
Lightweight
Durable
Compatible with MH and HPS Lamps
Compatible with 250w - 1000w
Lamp Not Included
Specifications
Product Dimensions: 25.25in x 6in
Creates Wider More Even Light Spread Eliminates “Hot Spots", & “Shady Edges", Promotes Vigorous Even Plant Growth Improved Yields In Shorter Periods Higher Light Levels Without Burning Position Lights Much Closer to Plants It’s So Cool ! Grow Through Summer Corrosion Resistant Aluminium
The Adjust-A-Wings original design combines cutting edge science with biological beauty and simplicity to create a reflector system of unparalleled performance and versatility. The Adjust-A-Wings can be adjusted to wide settings and positioned incredibly close to plants for maximum light transferal (growing power) and area coverage. Alternately, the wings may be adjusted to more narrow settings and positioned further from the plants to suit the light and heat requirements of more sensitive plants or plant stages. The adjustable nature and even spread of the light foot print gives growers the unique ability to create seasonal (spring, summer, autumn) conditions indoors and efficiently trigger their plant's natural hormone cycles for faster growth, better health & maturity and major yield increase. Twice the Power and Efficiency of Most Other Reflectors Increase the Growing Area under each lamp by up to 75% Increase Yield per Lamp up to 50%. Reduce Heat, Save Power The “Adjustable Light Spread", allows Growers to create Ideal Lighting Conditions across All Stages of Plant Growth. Sold in 25 Countries across 4 Continents, Adjust -A- Wings are the “Reflectors of Choice", for many of the Worlds Top Growers!
GROW1 Motorized Light Mover – Maximize Plant Growth with Even Light DistributionEnhance your indoor garden with the GROW1 Motorized Light Mover, designed to deliver efficient and even light coverage to all your plants. By ensuring uniform light distribution, this system reduces the occurrence of hot spots and promotes healthier plant growth. With adjustable settings for optimal height and distance, the GROW1 light mover is perfect for any indoor grower seeking to improve light exposure, boost plant health, and achieve higher yields. Compatible with various hydroponic setups, it’s the ideal tool for gardeners looking to enhance their lighting system.
Effortless Setup & Easy Operation for Every GrowerSetting up the GROW1 Motorized Light Mover is a breeze. The kit includes all necessary parts for a smooth, quick installation process. Its user-friendly design makes it easy for both beginners and experienced growers to get started. Once set up, the system operates seamlessly, efficiently pulling your LEDs to ensure all plants get the light they need. The intuitive design means minimal fuss, and with hassle-free maintenance, it’s a simple solution for those looking to optimize their indoor gardening setup.
Reliable Motor Performance for Smooth, Silent OperationThe GROW1 Motorized Light Mover is equipped with a high-performance, durable motor that ensures long-lasting and smooth operation. Quiet and efficient, it offers reliable performance, covering up to 44 lbs with ease. The motor's silent operation helps maintain a peaceful indoor environment, while its smooth functionality extends the coverage of your lighting system by approximately 20%. Whether you’re growing small plants or larger crops, the GROW1 light mover ensures consistent, reliable light movement.
Enhanced Lighting for Healthier Plants and Increased YieldsThe GROW1 Motorized Light Mover improves light distribution, making it an essential component of any hydroponic lighting system. With precise adjustments, this system guarantees that your plants receive consistent light throughout their growth cycle, promoting optimal health and boosting yields. Ideal for serious indoor growers, this system creates the perfect environment for plant development, surpassing traditional lighting methods to deliver superior results.Versatile & Durable Rail System for Any Garden SetupOur adaptable rail system is built from high-quality aluminum alloy, making it both durable and lightweight. The GROW1 light mover is compatible with a variety of lighting options and can be easily adjusted to suit your specific needs. Whether you have a small or large indoor garden, the system’s flexible design makes it perfect for diverse hydroponic setups, allowing you to customize your garden's lighting coverage.
Quiet Operation & Precise Timing Control for Optimal GrowthThe GROW1 Motorized Light Mover features ultra-quiet operation, ensuring that your plants grow uninterrupted. With adjustable timing control (ranging from 2 to 120 seconds), you can fine-tune your light distribution for maximum efficiency. This allows for more consistent and controlled light exposure, helping to create the ideal environment for your plants' growth. With its silent motor and precise control, the GROW1 system is the ultimate tool for anyone looking to optimize their indoor garden.
Note: Reflector/Fixture shown in photos is not included.
Includes
10RPM Motor
6 Foot power cord included
Dimension
Rail Length: 7ft 4in
Single 1/4" Hanging Ratchet Light Hanger (1 ratchet per box) The Hanging Ratchet Light Hanger is a small, useful system that allows you to secure reflectors, fans, filters, and more. Never again be tied down by knots, ropes, chains, and messy tie downs! Simply adjust it to your optimal height and with an easy pull the mechanism locks the rope into place. Use the quick release button for added convenience. Maximum weight capacity is 150 lbs.
Pair of 1/8" Hanging Ratchet Light Hangers (2 ratchets per box) The Hanging Ratchet Light Hangers are small, useful systems which allow you to secure reflectors, fans, filters, and more. Never again be tied down by knots, ropes, chains, and messy tie downs! Simply adjust them to your optimal height and with an easy pull the mechanisms lock the rope into place. Use the quick release button for added convenience. Maximum weight capacity is 150 lbs. These feature metal gears! More durable and longer lasting than other ones on the market.
The same Auxiliary Trolley used in the Add-A-Lamp kit, sold on its own. Use it to carry a second light, or to support vent tubing and power cords so they travel with the motor.
Extreme Duty trolley wheels, rated to 60 lb
Trolley only, no hardware
Works with LightRail 3.0, 3.5, 4.0 and 4.20
The RoboBar lets a LightRail 3.5 or 4.0 motor carry a larger LED fixture smoothly. Its 34" x 30" frame hangs the light from four corners at steep, triangulated angles, so a big, flat LED doesn't swing as it moves.
34" x 30" (86 x 75 cm)
Two outriggers, one center bar, two heavy-duty T-bar connectors and four corner eye screws
Two individually secured connectors to the motor, with Nyloc nuts
For LightRail 3.5 and 4.0 motors
Motor, rail and light not included
A LightRail 4.0 AdjustaDrive kit paired with the RoboBar for moving larger LED fixtures. Variable speed from 2 to 4 feet per minute, and the RoboBar's triangulated hanging points keep a big, flat LED from swinging as it travels.
LightRail 4.0 AdjustaDrive motor: 2 to 4 ft per minute, 0 to 60 second pause at each end
Two-piece 2 m (6'6") rail, hardware and instructions
RoboBar: 34" x 30" (86 x 75 cm) with two outriggers, center bar, two heavy-duty T-bar connectors and four corner eye screws
Extreme Duty trolley wheels preinstalled, rated to 60 lb
Grow light not included
Made in the USA by Gualala Robotics; 2-year limited warranty on the motor
A LightRail 3.5 IntelliDrive kit paired with the RoboBar, built to move larger LED fixtures. The RoboBar's triangulated hanging points keep a big, flat LED steady as it travels, so each light covers more of the room.
LightRail 3.5 IntelliDrive motor: about 4 ft per minute, 0 to 60 second pause at each end
Two-piece 2 m (6'6") rail, hardware and instructions
RoboBar: two outriggers, center bar, two heavy-duty T-bar connectors and four corner eye screws
Extreme Duty trolley wheels preinstalled, rated to 60 lb
Grow light not included
Made in the USA by Gualala Robotics; 2-year limited warranty on the motor
Rail Hanger Brackets are the easiest way to hang LightRail rail from the support bars of a grow tent or greenhouse.
Pack of 4 with instructions and zip ties: two per rail, so one pack hangs two rails
Fits tubing up to 1.5" in diameter
Holds the rail perpendicular to the support bar
For LightRail 3.0, 3.5, 4.0 and 4.20 rail
Extreme Duty trolley wheels with sealed precision steel ball bearings. They've come standard on LightRail 3.5 and 4.0 motors and Auxiliary Trolleys since October 2020; for older motors they're the upgrade for heavier lights such as LEDs or lights with a built-in ballast.
Rated to 60 lb per set
Sealed precision steel ball bearings for humid grow rooms
Lifetime warranty
Works with LightRail 3.0, 3.5, 4.0 and 4.20
The 24" RoboStik turns a horizontal grow light 90 degrees to the direction of travel, so the light sweeps a wider pattern as it moves along the rail.
24" stabilizing bar
Hangs a horizontal light perpendicular to the rail
Not needed when the light hangs parallel to the direction of travel
Works with LightRail 3.0, 3.5, 4.0 and 4.20
