Netafim Woodpecker Pressure Compensating Junior Dripper Assembly 0.5GPH 36in (25pcs/Bag)
Netafim Single dripper stake assemblies will reduce set up time considerably. This 36-inch assembly will install right where you need it. Dripper assembly uses a 0.5GPH pressure compensating emitter with CNL check vale, 36 inches of Super Flex Tubing and an angled barbed stake. Minimum operating pressure is 10PSI.
Delivering superior uniformity with slow, low-flow drippers for even and uniform soil wetting without the run-off.
The Netafim Dripper Stake Assembly is ideal for soilless substrates and hydroponic applications because each plant pot or rock wool cube receives an equal and precise amount of water nutrients.
The slower and lower flow wet the soil media thoroughly without any run-off around the edges of the container. This allows longer runs on smaller polyethylene supply laterals maintaining excellent uniformity while holding down system costs. The PCNL dripper feature ensures that each plant receives the same amount of water at the same time. A built-in check valve assures that all the drippers will turn on – when the system is fully pressurized – and off at the same time. Dripper Stake Assembly with PCNL dripper offers high performance for a very low cost per plant position.
Why Dripper Stake Assemblies?
Higher Uniformity = Higher Crop Values
Most sprinkler systems lack uniform coverage and this creates wet and dry areas. Plant foliage interferes with water reaching the container. The result is a necessity to overwater many plants in order to provide adequate water to the dry areas and to overcome the interference of foliage. Netafim Dripper Stake Assemblies overcome these obstacles by delivering water directly to the plant. Each dripper adjusts itself automatically to the system pressure resulting in a watering uniformity of 94% – even on slopes. Since all water is delivered directly to the container, there is no run-off – no overspray into the aisles saving water, fertilizer, and energy.
Product Advantages
Provide Uniform Flow Distribution
Maintains a Uniform FLow Rate with the widest Compensation Range 7 to 58 psi
Patented pressure differential system maintains uniform flow rate at different inlet working pressures (within the recommended range) ensuring exact distribution of water and nutrients
Industry’s widest flow path and wider dripper cross section allow large particles through the dripper’s short flow path
Continuous self-flushing system, even while irrigating, provides improved resistance to clogging
Applications
Vineyards
Orchards
Greenhouses and Nurseries
Ideal for soilless substrates and hydroponic applications
Dripper Stake Components
PC Drippers: Pressure Compensating to provide a constant flow from 10 to 45 psi and has a built-in check valve to ensure instantaneous on-off at system shut-down.
Angle Barbed Stake: Unique flow channel down the length of the stake directing the water into the container. It also has a pointed end for easy container insertion.
Super Flex UV White™ Polyethylene (PE) Tubing: Super Flex UV White™ PE Tubing produces cooler water temperatures and enhances plant growth. Made from the highest quality plastics with excellent Ultra-Violet (UV) resistance, our reflective white tubing is completely opaque to prevent algae growth. This tubing is not coated or layered white, it is solid white for long-term durability. It can withstand heat, direct sun and harsh chemicals.
Remove dirt and other particles from your water with the 3/4" Y Filter with 120 mesh (130 micron) screen. For use with 3/4" outer diameter hoses/tubing. Replacement screens available separately.Maximum Pressure: 5000PaWorking Temp:-70 to 300 degrees Fahrenheit
Netafim single dripper stake assemblies come fully assembled and streamline the installation process. Choose between 18, 24, 30, 36 or 48 inch assemblies that can install right where you need it. Dripper assembly uses a 0.3 gph pressure compensating emitter with CNL check value, 18, 24, 30, 36 or 48 inches of Super Flex Tubing and an angled barbed stake. Pair with the Netafim Punch Tool, Netafim UV Polyethylene Tubing and Netafim Techlock fittings and fine tune your drip irrigation system. Minimum operating pressure is 10 psi.
Netafim single dripper stake assemblies come fully assembled and streamline the installation process. Choose between 18, 24, 30, 36 or 48 inch assemblies that can install right where you need it. Dripper assembly uses a 0.5 gph pressure compensating emitter with CNL check value, 18, 24, 30, 36 or 48 inches of Super Flex Tubing and an angled barbed stake.
Minimum operating pressure is 10 psi.
Pair with the Netafim Punch Tool, Netafim UV Polyethylene Tubing and Netafim Techlock fittings and fine tune your drip irrigation system.
Netafim Woodpecker Pressure Compensating Dripper 0.53GPH Brown/Red (250pcs/Bag)
Achieve optimal irrigation with the Netafim Woodpecker Pressure Compensating Dripper, designed to deliver water evenly across varying elevations and soil types. This innovative dripper features a pressure-compensating mechanism that ensures consistent flow rates, even amidst fluctuations in pressure, making it ideal for hilly or uneven terrains. This dripper features a flow rate of 0.53GPH and an operating pressure range of 7PSI to 60PSI.
The unique "Woodpecker" design allows for precise placement and efficient water delivery, significantly reducing water wastage and enhancing irrigation efficiency. Perfect for both agricultural and landscaping applications, these drippers promote healthy plant growth while conserving precious water resources. Upgrade your drip irrigation system today for reliable and effective irrigation!
Features
Provides consistent operating pressure (7PSI - 60PSI).
5PSI Internal Check Valve (prevents low-pressure drainage.)
Anti-Siphon Operation (prevents contaminants from being drawn into the dripper.)
Unique Design (regulates flow and provides self-cleaning action.)
Compatible with Techline CV Dripperline without causing dripperline drainage.
Can be installed in piping networks with a wide range of pressure variations.
Benefits
Consistent Water Delivery: Its pressure-compensating mechanism ensures uniform flow rates, even with fluctuations in system pressure, which is essential for maintaining healthy plants.
Efficiency in Uneven Terrain: Designed to work effectively in hilly or irregular landscapes, it prevents over- or under-watering, promoting better plant growth.
Water Conservation: By delivering precise amounts of water directly to the root zone, it reduces water wastage and helps conserve this vital resource.
Improved Crop Yield: Consistent and efficient irrigation contributes to healthier plants, leading to higher yields and better quality produce.
Versatile Applications: Suitable for various environments, including agriculture, landscaping, nurseries, and greenhouses, making it a flexible solution for different irrigation needs.
Easy Installation and Maintenance: Designed for straightforward setup, the dripper requires minimal maintenance, making it user-friendly for both professionals and DIY enthusiasts.
Durability and Reliability: Built to withstand various environmental conditions, it ensures long-term performance, reducing the need for frequent replacements.
Applications
Agricultural Irrigation: Ideal for row crops, orchards, and vineyards, ensuring consistent water delivery across uneven terrain.
Landscape Irrigation: Perfect for gardens, parks, and residential landscapes, promoting efficient watering for diverse plant types.
Greenhouse Cultivation: Provides precise irrigation for plants in controlled environments, optimizing water use and plant health.
Nurseries and Plant Propagation: Supports the growth of seedlings and young plants by delivering uniform moisture levels.
Hydroponics: Suitable for systems where water efficiency and consistent moisture are crucial for plant development.
Rehabilitation of Disturbed Lands: Assists in restoring vegetation in areas where soil quality varies, enhancing plant survival rates.
Notes
Minimum Operating Pressure: 7.0PSI
Maximum Operating Pressure: 60.0PSI
Recommended Filtration: 120 Mesh
Grow1 Dripper Stakes are perfect for irrigation systems requiring a large watering radius. Grow1 5" Adjustable Drippers feature an adjustable flow rate from 0 to 32 GPH (Gallons Per Hour) and a maximum spraying radius of 20".
The Netafim Self-Piercing Emitter Insertion Tool s a heavy duty plastic handle punch that makes adding any Netafim drippers to your irrigation system easy and convenient.
Use our sturdy black vinyl tubing, which is FDA-approved and BPA-free, for your irrigation systems and tanks, and to complete your own hydroponic systems. The material is easy to cut to size, but will remain strong and reliable. Choose from three different 25-foot sizes, each in a convenient dispenser pack. Keep a roll on hand for instant access to repairs.15 PSI max operating pressure at 70 degrees.
Use our sturdy black vinyl tubing, which is FDA-approved and BPA-free, for your irrigation systems and tanks, and to complete your own hydroponic systems. The material is easy to cut to size, but will remain strong and reliable. Choose from six different 100-foot sizes, each in a convenient dispenser pack. Keep a roll on hand for instant access to repairs.
The FloraFlex Matrix Circulator is part of the Matrix System, a patent pending first of its kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your plants. The Round Matrix system can be used with pots ranging from 7.5"-18" Diameters. The Square Matrix System can be used with the PotPro System, Rockwool cubes, or any other container you desire to use them with. You will need a Matrix unit, the same size Matrix Pad, and the correlating Matrix Circulator. Use the 2 1/4" Circulator with the Square 4", Square 6", Round 7.5" and Round 9" Matrix.
The FloraFlex Matrix Pad is part of the Matrix System, a patent pending first of its kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your plants. The Round Matrix System can be used with pots ranging from 7.5 Diameters. You will need a Matrix unit, the same size Matrix Pad, and the correlating Matrix Circulator.Water and nutrients travel into the Circulator, hit the slope of the Matrix and are pushed outward into eight maze sections that have individual holes dripping the water and nutrients onto the Matrix Wicking Pad.
Widely used to provide oxygen in aquariums, fish farms and hydroponic systems. Includes chrome air manifold, ranging from six to twelve outlets. Cylinders and pistons are made of premium materials, making the pump strong and durable. Convenient to operate without oil or much noise. All pumps now includes two different fittings. 728450 and 728455 comes with 1/4 in and 3/8 in fittings. 728457 and 728459 comes with 1/2 in and 3/8 in fittings.
Models 2 through 18 incorporate an adjustable Venturi which adds Aeration into the nutrient rich water flow, stimulating root growth.Power Cord on all modelsTime proven Magnetic Drive TechnologyEnergy efficient and Oil-FreeIn-line or Submersible OperationModels 2 through 7 include: 1/2Barb x 1/2" NPT FittingModels 9.5 through 18 include: 1/2Barb x 3/4" NPT FittingModels 24 and 36 include 1 Male NPT Outlet5-Year Limited Warranty
Use our sturdy black vinyl tubing, which is FDA-approved and BPA-free, for your irrigation systems and tanks, and to complete your own hydroponic systems. The material is easy to cut to size, but will remain strong and reliable. Choose from six different 100-foot sizes, each in a convenient dispenser pack. Keep a roll on hand for instant access to repairs.
EcoPlus Elite Series Automatic Submersible Pumps are specifically designed for uses in narrow pits or reservoirs. These pumps can fit in spaces of 8 in x 8 in. Suitable to pump clear water containing particles with maximum diameter up to 1/4 in. Built with anti-corrosive and rust-proof materials. These pumps have low suction capability down to a 1/16 in. They include an integrated float switch which automatically shuts your pump off so it doesn’t run dry. Pumps have 32.8 ft power cord.
Use our sturdy black vinyl tubing, which is FDA-approved and BPA-free, for your irrigation systems and tanks, and to complete your own hydroponic systems. The material is easy to cut to size, but will remain strong and reliable. Choose from three different 25-foot sizes, each in a convenient dispenser pack. Keep a roll on hand for instant access to repairs.15 PSI max operating pressure at 70 degrees.
![Netafim Hole Punch Tool [MTUBEPPUN]](//mattshydroponics.com/cdn/shop/files/20bcf2e8HGC747759-01.jpg?v=1789192886&width=645)
![Netafim Hole Punch Tool [MTUBEPPUN]](http://mattshydroponics.com/cdn/shop/files/20bcf2e8HGC747759-01.jpg?v=1789192886&width=645)
