A complete 6-inch exhaust and odor-control setup in one box: Vivosun's AeroZesh T6 EC inline fan with its E12 speed controller, a matching 6" carbon filter and 8 ft of 6" ducting. The fan moves up to 408 CFM, and the filter uses RC412 Australian virgin charcoal rated 1200+ IAV to scrub odors from the tent exhaust.
Fan: AeroZesh T6, up to 408 CFM at 3,000 RPM, 35 W EC motor, 32 dBA, IP44
E12 controller: 10 PWM speeds, speed memory after a power loss, 3 on/off cycle modes; upgradeable to a GrowHub E42A
Carbon filter: 6" flange, 15.7" x 8.9" x 8.9", RC412 Australian virgin charcoal rated 1200+ IAV
Ducting: 6" x 8 ft (2.44 m) aluminum flex duct
Input: 110–240 V, 50/60 Hz; 2 m power cord, 3 m cord to the controller
In the box: AeroZesh T6 fan with E12 controller, 6" carbon filter, 6" x 8 ft ducting.
A complete 4-inch exhaust and odor-control setup in one box: Vivosun's AeroZesh T4 EC inline fan with its E12 speed controller, a matching 4" carbon filter and 8 ft of 4" ducting. The fan moves up to 210 CFM, and the filter uses RC412 Australian virgin charcoal rated 1200+ IAV to scrub odors from the tent exhaust.
Fan: AeroZesh T4, up to 210 CFM at 3,000 RPM, 20 W EC motor, 28 dBA, IP44
E12 controller: 10 PWM speeds, speed memory after a power loss, 3 on/off cycle modes; upgradeable to a GrowHub E42A
Carbon filter: 4" flange, 11.8" x 6.9" x 6.9", RC412 Australian virgin charcoal rated 1200+ IAV
Ducting: 4" x 8 ft (2.44 m) aluminum flex duct
Input: 110–240 V, 50/60 Hz; 2 m power cord, 3 m cord to the controller
In the box: AeroZesh T4 fan with E12 controller, 4" carbon filter, 4" x 8 ft ducting.
The AeroZesh G8 is an 8-inch PWM-controlled EC inline fan from Vivosun for tent exhaust, intake or an 8" carbon filter. It's rated up to 725 CFM on 78 watts, and the E12 controller that comes with it offers ten speed steps plus timed on/off cycling.
Airflow: up to 725 CFM at 3,000 RPM
Power: 78 W PWM-controlled EC motor, 110–240 V, 50/60 Hz
Noise: 51 dBA
E12 controller: 10 PWM speeds, remembers the last speed after a power loss, 3 on/off cycle modes
Upgradeable to a Vivosun GrowHub E42A controller for app control (sold separately)
Fan body: 13" x 9.9" x 9.3" with 8" duct collars; PP and alloy-steel housing
IP44
1.8 m power cord; 3 m cord to the controller
The AeroZesh G6 is a 6-inch PWM-controlled EC inline fan from Vivosun for tent exhaust, intake or a 6" carbon filter. It's rated up to 388 CFM on 35 watts, and the E12 controller that comes with it offers ten speed steps plus timed on/off cycling.
Airflow: up to 388 CFM at 2,500 RPM
Power: 35 W PWM-controlled EC motor, 110–240 V, 50/60 Hz
Noise: 45 dBA
E12 controller: 10 PWM speeds, remembers the last speed after a power loss, 3 on/off cycle modes
Upgradeable to a Vivosun GrowHub E42A controller for app control (sold separately)
Fan body: 12.2" x 8.7" x 8.3" with 6" duct collars; PP and alloy-steel housing
IP44
1.8 m power cord; 3 m cord to the controller
The AeroZesh G4 is a 4-inch PWM-controlled EC inline fan from Vivosun for tent exhaust, intake or a 4" carbon filter. It's rated up to 195 CFM on 20 watts, and the E12 controller that comes with it offers ten speed steps plus timed on/off cycling.
Airflow: up to 195 CFM at 2,600 RPM
Power: 20 W PWM-controlled EC motor, 110–240 V, 50/60 Hz
Noise: 39 dBA
E12 controller: 10 PWM speeds, remembers the last speed after a power loss, 3 on/off cycle modes
Upgradeable to a Vivosun GrowHub E42A controller for app control (sold separately)
Fan body: 11.8" x 7.8" x 7.4" with 4" duct collars; PP and alloy-steel housing
IP44
1.8 m power cord; 3 m cord to the controller
The AeroZesh T6 is Vivosun's 6-inch EC inline fan for exhausting a grow tent or pulling air through a 6" carbon filter. It moves up to 408 CFM on 35 watts at 32 dBA, and the included E12 controller gives you ten PWM speed steps and remembers your setting after a power cut.
Airflow: up to 408 CFM at 3,000 RPM
Power: 35 W EC motor, 110–240 V, 50/60 Hz
Noise: 32 dBA
E12 controller: 10 PWM speeds, remembers the last speed after a power loss, 3 on/off cycle modes
Upgradeable to a Vivosun GrowHub E42A controller for app control (sold separately)
Fan body: 12.4" x 8" x 8.7" with 6" duct collars; PP and alloy-steel housing
NMB ball bearing rated 67,000 hours; IP44
2 m power cord; 3 m cord to the controller
In the box: fan, E12 controller, Type-C extension cable, 2 rope hangers, 4 screws and 4 wall anchors.
The AeroZesh T4 is Vivosun's 4-inch EC inline fan for exhausting a grow tent or pulling air through a 4" carbon filter. It moves up to 210 CFM on 20 watts at 28 dBA, and the included E12 controller gives you ten PWM speed steps and remembers your setting after a power cut.
Airflow: up to 210 CFM at 3,000 RPM
Power: 20 W EC motor, 110–240 V, 50/60 Hz
Noise: 28 dBA
E12 controller: 10 PWM speeds, remembers the last speed after a power loss, 3 on/off cycle modes
Upgradeable to a Vivosun GrowHub E42A controller for app control (sold separately)
Fan body: 11.9" x 7" x 7.8" with 4" duct collars; PP and alloy-steel housing
NMB ball bearing rated 67,000 hours; IP44
2 m power cord; 3 m cord to the controller
In the box: fan, E12 controller, Type-C extension cable, 2 rope hangers, 4 screws and 4 wall anchors.
A steel filter box for the intake side of an inline fan that catches dust, dirt and lint before they get pulled into your tent or grow room. It comes with a pleated high-efficacy filter and takes standard 14" x 20" x 1" MERV filters when it's time to swap.
Fits 10" ducting (9.72" duct opening); matched to CLOUDLINE S10 and T10 fans
Airflow: 532–798 CFM minimum range, 2400 CFM maximum
1 mm cold-rolled steel box with matte black finish; aluminum duct flanges
Slide-lock door with a neoprene seal for tool-free filter changes
Accepts standard 14" x 20" x 1" filters; included pleated filter traps particles down to 0.3–1.0 micron
Dimensions: 22.51" x 11.57" x 13.93"
A steel filter box for the intake side of an inline fan that catches dust, dirt and lint before they get pulled into your tent or grow room. It comes with a pleated high-efficacy filter and takes standard 14" x 20" x 1" MERV filters when it's time to swap.
Fits 8" ducting (7.79" duct opening); matched to CLOUDLINE S8 and T8 fans
Airflow: 402–604 CFM minimum range, 1600 CFM maximum
1 mm cold-rolled steel box with matte black finish; aluminum duct flanges
Slide-lock door with a neoprene seal for tool-free filter changes
Accepts standard 14" x 20" x 1" filters; included pleated filter traps particles down to 0.3–1.0 micron
Dimensions: 22.51" x 11.57" x 13.93"
A steel filter box for the intake side of an inline fan that catches dust, dirt and lint before they get pulled into your tent or grow room. It comes with a pleated high-efficacy filter and takes standard 12" x 20" x 1" MERV filters when it's time to swap.
Fits 6" ducting (5.78" duct opening); matched to CLOUDLINE S6 and T6 fans
Airflow: 182–272 CFM minimum range, 800 CFM maximum
1 mm cold-rolled steel box with matte black finish; aluminum duct flanges
Slide-lock door with a neoprene seal for tool-free filter changes
Accepts standard 12" x 20" x 1" filters; included pleated filter traps particles down to 0.3–1.0 micron
Dimensions: 23.46" x 8.42" x 11.73"
A steel filter box for the intake side of an inline fan that catches dust, dirt and lint before they get pulled into your tent or grow room. It comes with a pleated high-efficacy filter and takes standard 12" x 20" x 1" MERV filters when it's time to swap.
Fits 4" ducting (3.81" duct opening); matched to CLOUDLINE S4 and T4 fans
Airflow: 80–120 CFM minimum range, 400 CFM maximum
1 mm cold-rolled steel box with matte black finish; aluminum duct flanges
Slide-lock door with a neoprene seal for tool-free filter changes
Accepts standard 12" x 20" x 1" filters; included pleated filter traps particles down to 0.3–1.0 micron
Dimensions: 23.46" x 8.42" x 11.73"
Two of Mars Hydro's 6" oscillating clip fans in one package. Each one clamps to a tent pole, oscillates automatically and runs at any of 10 speeds on 9 watts, and both can run from the MarsPro app through a Mars Hydro iTime, iControl or iHub-Pro (sold separately).
2 fans per package
Airflow: 300–315 CFM per fan · 0–2,100 RPM with 10-speed adjustment
Automatic oscillation with adjustable head tilt
Power: 9 W ±5% per fan · 100–240 V AC · 0.135 A max at 120 V
Size: 8.1" x 9.0" x 9.3" (206 x 228 x 236 mm) per fan
IP44 · Operates from -4 to 104°F (-20 to 40°C)
MarsPro app control through an iTime, iControl or iHub-Pro (sold separately); RJ12 cable not included
In the box: 2 x 6" oscillating clip fans.
The Airone6 builds a 6" EC inline fan and an activated carbon filter into one housing, so a 4' x 4' or 5' x 5' tent gets exhaust and odor control from a single unit. The filter comes out separately when it's time to replace it, and a pre-filter traps larger particles to help it last.
Airflow: 305 CFM · 3,750 RPM · 6" (150 mm) duct
EC motor with built-in speed controller
Power: 48 W ±5% · AC 100–240 V, 50/60 Hz
Filter: high-iodine-value activated carbon, removable and replaceable on its own; pre-filter included
Suits 4' x 4' and 5' x 5' grow tents
MarsPro app control; works with the Mars Hydro iControl and iHub Pro (sold separately)
Operates from -4 to 140°F (-20 to 60°C)
In the box: 1 x inline fan with carbon filter, 1 x speed controller, 1 x 4 m (13 ft) ducting, 1 x noise-dampening foam, 1 x power cord, 2 x steel clamps, 2 x steel hangers, 1 x duct vent cover.
Two of Spider Farmer's 6-inch EC clip fans, for tents that need airflow above and below the canopy or from two sides. Each fan draws 9 watts across 10 speeds, oscillates and tilts, carries an IP54 rating, and is GGS smart-control ready for a Spider Farmer GGS controller or power strip.
Per fan: 9 W ±5% EC motor · AC 100–240 V
Airflow: 300–315 CFM per fan · up to 2,300 RPM
10 wind speeds and 10-level wide-angle oscillation
Head: 90° oscillation, 100° vertical adjustment
IP54 water resistance · 8.2 ft (2.5 m) power cord
Rated life: 67,000 hours
In the box: 2 clip fans, each with grip clip and mounting hardware.
Spider Farmer's 6-inch clip fan clamps onto a tent pole to keep air moving through and under the canopy. The EC motor draws just 9 watts across 10 speeds, the head oscillates and tilts to spread the breeze, and it's IP54-rated for humid grow rooms. It's GGS smart-control ready, so a Spider Farmer GGS controller or power strip can run it with the rest of the tent.
Power: 9 W ±5% EC motor · AC 100–240 V
Airflow: 300–315 CFM · Speed: up to 2,300 RPM
10 wind speeds and 10-level wide-angle oscillation
Head: 90° oscillation, 100° vertical adjustment
IP54 water resistance · 8.2 ft (2.5 m) power cord
Rated life: 67,000 hours
Net weight: 1.15 kg (2.5 lb)
In the box: clip fan with grip clip, thumb screw, cable ties, cable mount and user manual.
The complete iFresh 6" set bundles Mars Hydro's 402 CFM EC inline fan and a refillable carbon filter with a 6" clip fan, ducting and a handful of tent extras: grow bags, a grow net, scissors and grow-room glasses. Fan speed is set with the speed controller, and the iFresh MarsPro Add-On Pack (sold separately) adds app control.
Inline fan: iFresh 6" EC, up to 402 CFM (approx. 682 m³/h), PWM speed control
Fan power: 62 W ±5%, 0.94 A max · 110–240 VAC, 50/60 Hz
Fan noise: 32 dBA (Mars Hydro lab, no-load)
Fan size: 12.3" x 8.2" x 5.8" (31.3 x 20.8 x 14.7 cm) · IP44
Refillable carbon filter for odor control
Control: speed controller; MarsPro app control with the iFresh MarsPro Add-On Pack (sold separately)
In the box: iFresh 6" inline duct fan, carbon filter, duct, 3 x steel hoops, 4 x 5-gallon grow bags, grow net, 6" clip fan, 6" scissors, glasses, 2 x ventilation mesh covers, 2 x grow tent corner brackets.
The complete iFresh 4" set bundles Mars Hydro's 205 CFM EC inline fan and a refillable carbon filter with a 6" clip fan, ducting and a handful of tent extras: grow bags, a grow net, scissors and grow-room glasses. Fan speed is set with the speed controller, and the iFresh MarsPro Add-On Pack (sold separately) adds app control.
Inline fan: iFresh 4" EC, up to 205 CFM (approx. 348 m³/h), PWM speed control
Fan power: 27 W ±5%, 0.4 A max · 110–240 VAC, 50/60 Hz
Fan noise: 26 dBA (Mars Hydro lab, no-load)
Fan size: 11.9" x 6.4" x 3.8" (30.2 x 16.3 x 9.7 cm) · IP44
Refillable carbon filter for odor control
Control: speed controller; MarsPro app control with the iFresh MarsPro Add-On Pack (sold separately)
In the box: iFresh 4" inline duct fan, carbon filter, duct, 3 x steel hoops, 4 x 5-gallon grow bags, grow net, 6" clip fan, 6" scissors, glasses, 2 x ventilation mesh covers, 2 x grow tent corner brackets.
The GGS version of Spider Farmer's 2-in-1 ventilation system: a 6-inch inline fan with the activated carbon filter built into the housing, run by the GGS smart controller and its temperature and humidity sensor. One unit handles exhaust and odor control, the carbon cartridge is replaceable, and the included expanders leave room to add other Spider Farmer smart devices.
Airflow: 305 CFM fan only; 157 CFM through the built-in filter
Power: 48 W ±5% · Voltage: AC 100–240 V, 50/60 Hz · 3,750 RPM
Noise: 56 dB max
Size: 48.7 x 19.6 cm (19.2" x 7.7")
GGS controller connects directly to the fan unit (no separate power supply)
Replaceable carbon filter cartridge · operating temperature -20 to 60 °C (-4 to 140 °F)
Net weight: 6.1 kg (13.4 lb)
In the box: fan with built-in carbon filter, GGS controller, temperature and humidity sensor, AP10 and AP4 expanders, 6 RJ12 cables, 4 m (13 ft) ducting, noise-dampening foam, power cord, 2 steel clamps, 2 steel hangers, duct vent cover.
Spider Farmer's 2-in-1 ventilation system builds the activated carbon filter into the fan housing, so a 6-inch exhaust setup is one unit instead of a separate fan, filter and extra duct run. The carbon cartridge is replaceable, noise-dampening foam comes in the box, and the speed controller can be swapped for a Spider Farmer GGS controller when you want app control.
Airflow: 345 CFM fan only; 157 CFM through the built-in filter
Power: 62 W ±5% · Voltage: AC 100–240 V, 50/60 Hz · 4,000 RPM
Noise: 60 dB max
Size: 48.7 x 19.6 cm (19.2" x 7.7")
Replaceable carbon filter cartridge
Operating temperature: -20 to 60 °C (-4 to 140 °F)
Net weight: 6.1 kg (13.4 lb)
In the box: fan with built-in carbon filter, speed controller, 4 m (13 ft) ducting, noise-dampening foam, power cord, 2 steel clamps, 2 steel hangers, duct vent cover.
Spider Farmer's smart 6-inch ventilation kit combines the 402 CFM EC inline fan, a 6-inch carbon filter with pre-filter, ducting and the GGS controller with a temperature and humidity sensor. The fan can run on schedules or react to temperature and humidity from the Spider Farmer app, and the kit is sized for 4' x 4' and 5' x 5' tents.
Fan: 402 CFM, 62 W EC motor
Duct size: 6" (15.2 cm) · Fan body: 12.4" x 8.9" x 8.3" (31.5 x 22.5 x 21 cm)
Carbon filter: 10" x 10" x 8.8" (25.5 x 25.5 x 22.5 cm)
GGS controller: four operating modes, start/stop times, separate running and standby speeds, CO2 device on/off control
Controller connects directly to the fan (no separate power supply)
Recommended for 120 x 120 and 150 x 150 cm tents
In the box: 6-inch inline fan, 6-inch carbon filter, pre-filter, GGS controller, temperature and humidity sensor, light adapter, ducting, 2 duct filter vent covers, 4 steel hangers, 3 clamps, 6 RJ12 cables, RJ12 splitter.
The 8-inch PRO kit pairs an upgraded 807 CFM CLOUDLINE PRO fan with a smart climate controller you can program with temperature and humidity triggers, schedules and cycles, then check from the Wi-Fi app. An 8-inch Australian charcoal carbon filter and 25 feet of ducting complete the setup.
Fan: 8" CLOUDLINE PRO inline fan with PWM-controlled EC motor, 807 CFM, 39 dBA, 746 Pa static pressure
Power: 100–240 V AC; 180 W max, 78 W average draw
Controller: smart climate controller with triggers, schedules, cycles and Wi-Fi app access (5.19" x 2.91" x 1.06")
Carbon filter: 38 mm bed of Australian virgin RC412 charcoal, 1200+ IAV, rated to 770 CFM
Ducting: 8" x 25 ft four-layer flexible ducting with spiral steel wire
Fan: 8.54" x 11.89" x 9.17"; filter: 19.8" x 10.94"
Dual ball bearings rated for 67,000 hours (L10) · IP44 · CE, RoHS
In the box: inline fan, climate controller, carbon filter, 8" x 25 ft ducting, duct clamps, pre-filter cloth, rope clip hangers and hanging straps.
This is the iFresh 6" fan-and-filter kit with Mars Hydro's 2026 iControl smart controller included, for ventilation and odor control you can run from the MarsPro app. The fan moves up to 402 CFM on 62 watts.
Kit: iFresh 6" EC inline duct fan, 6" refillable carbon filter and 2026 iControl smart controller
Fan airflow: up to 402 CFM (approx. 682 m³/h) · Static pressure: 419 Pa ±10%
EC motor with PWM speed control · 3,000 RPM ±10%
Power: 62 W ±5%, 0.94 A max · 110–240 VAC, 50/60 Hz
Fan size: 12.3" x 8.2" x 5.8" (31.3 x 20.8 x 14.7 cm) · IP44
The iControl is powered from the fan (it has no power cord of its own)
App control through the iControl and the MarsPro app
This is the iFresh 4" fan-and-filter kit with Mars Hydro's iControl smart controller included, so your ventilation can run itself. Through the iControl and the MarsPro app you can watch temperature, humidity and lighting, set schedules and let the fan speed adjust automatically.
Kit: iFresh 4" EC inline duct fan, 4" refillable carbon filter and iControl smart controller
Fan airflow: up to 205 CFM (approx. 348 m³/h) · Static pressure: 347 Pa ±10%
EC motor with PWM speed control · 3,000 RPM ±10%
Power: 27 W ±5%, 0.4 A max · 110–240 VAC, 50/60 Hz
Fan size: 11.9" x 6.4" x 3.8" (30.2 x 16.3 x 9.7 cm) · IP44
Activated carbon filter for odors, smoke and VOCs; refill the carbon core instead of replacing the filter
MarsPro app through the iControl: climate monitoring, schedules and automatic fan speed
The iFresh 6" kit pairs Mars Hydro's 402 CFM EC inline fan with a refillable Australian-charcoal carbon filter, a speed controller and the ducting and hardware to hang it all. It's smart-ready too: add the iFresh MarsPro Add-On Pack (sold separately) for app control, alarms and schedules.
Fan airflow: up to 402 CFM (approx. 682 m³/h) · Static pressure: 419 Pa ±10%
EC motor with PWM speed control · 3,000 RPM ±10%
Power: 62 W ±5%, 0.94 A max · 110–240 VAC, 50/60 Hz
Noise: 32 dBA (Mars Hydro lab, no-load)
Fan size: 12.3" x 8.2" x 5.8" (31.3 x 20.8 x 14.7 cm)
Australian activated charcoal carbon filter with a refillable core, for odors, smoke and VOCs
IP44 · Operates from -4 to 140°F (-20 to 60°C)
In the box: 1 x iFresh 6" inline duct fan, 1 x 6" carbon filter, 1 x speed controller, 1 x flexible duct, 3 x duct clamps, 2 x hanging straps.