A complete 4-inch exhaust and odor-control setup in one box: Vivosun's AeroZesh G4 EC inline fan with its E12 speed controller, a matching 4" carbon filter and 8 ft of 4" ducting. The fan moves up to 195 CFM, and the filter uses RC412 Australian virgin charcoal rated 1200+ IAV to scrub odors from the tent exhaust.
Fan: AeroZesh G4, up to 195 CFM at 2,600 RPM, 20 W EC motor, 39 dBA, IP44
E12 controller: 10 PWM speeds, speed memory after a power loss, 3 on/off cycle modes; upgradeable to a GrowHub E42A
Carbon filter: 4" flange, 11.8" x 6.9" x 6.9", RC412 Australian virgin charcoal rated 1200+ IAV
Ducting: 4" x 8 ft (2.44 m) aluminum flex duct
Input: 110–240 V, 50/60 Hz; 1.8 m power cord, 3 m cord to the controller
In the box: AeroZesh G4 fan with E12 controller, 4" carbon filter, 4" x 8 ft ducting.
A complete 6-inch exhaust and odor-control setup in one box: Vivosun's AeroZesh T6 EC inline fan with its E12 speed controller, a matching 6" carbon filter and 8 ft of 6" ducting. The fan moves up to 408 CFM, and the filter uses RC412 Australian virgin charcoal rated 1200+ IAV to scrub odors from the tent exhaust.
Fan: AeroZesh T6, up to 408 CFM at 3,000 RPM, 35 W EC motor, 32 dBA, IP44
E12 controller: 10 PWM speeds, speed memory after a power loss, 3 on/off cycle modes; upgradeable to a GrowHub E42A
Carbon filter: 6" flange, 15.7" x 8.9" x 8.9", RC412 Australian virgin charcoal rated 1200+ IAV
Ducting: 6" x 8 ft (2.44 m) aluminum flex duct
Input: 110–240 V, 50/60 Hz; 2 m power cord, 3 m cord to the controller
In the box: AeroZesh T6 fan with E12 controller, 6" carbon filter, 6" x 8 ft ducting.
A complete 4-inch exhaust and odor-control setup in one box: Vivosun's AeroZesh T4 EC inline fan with its E12 speed controller, a matching 4" carbon filter and 8 ft of 4" ducting. The fan moves up to 210 CFM, and the filter uses RC412 Australian virgin charcoal rated 1200+ IAV to scrub odors from the tent exhaust.
Fan: AeroZesh T4, up to 210 CFM at 3,000 RPM, 20 W EC motor, 28 dBA, IP44
E12 controller: 10 PWM speeds, speed memory after a power loss, 3 on/off cycle modes; upgradeable to a GrowHub E42A
Carbon filter: 4" flange, 11.8" x 6.9" x 6.9", RC412 Australian virgin charcoal rated 1200+ IAV
Ducting: 4" x 8 ft (2.44 m) aluminum flex duct
Input: 110–240 V, 50/60 Hz; 2 m power cord, 3 m cord to the controller
In the box: AeroZesh T4 fan with E12 controller, 4" carbon filter, 4" x 8 ft ducting.
The AeroZesh G8 is an 8-inch PWM-controlled EC inline fan from Vivosun for tent exhaust, intake or an 8" carbon filter. It's rated up to 725 CFM on 78 watts, and the E12 controller that comes with it offers ten speed steps plus timed on/off cycling.
Airflow: up to 725 CFM at 3,000 RPM
Power: 78 W PWM-controlled EC motor, 110–240 V, 50/60 Hz
Noise: 51 dBA
E12 controller: 10 PWM speeds, remembers the last speed after a power loss, 3 on/off cycle modes
Upgradeable to a Vivosun GrowHub E42A controller for app control (sold separately)
Fan body: 13" x 9.9" x 9.3" with 8" duct collars; PP and alloy-steel housing
IP44
1.8 m power cord; 3 m cord to the controller
The AeroZesh G6 is a 6-inch PWM-controlled EC inline fan from Vivosun for tent exhaust, intake or a 6" carbon filter. It's rated up to 388 CFM on 35 watts, and the E12 controller that comes with it offers ten speed steps plus timed on/off cycling.
Airflow: up to 388 CFM at 2,500 RPM
Power: 35 W PWM-controlled EC motor, 110–240 V, 50/60 Hz
Noise: 45 dBA
E12 controller: 10 PWM speeds, remembers the last speed after a power loss, 3 on/off cycle modes
Upgradeable to a Vivosun GrowHub E42A controller for app control (sold separately)
Fan body: 12.2" x 8.7" x 8.3" with 6" duct collars; PP and alloy-steel housing
IP44
1.8 m power cord; 3 m cord to the controller
The AeroZesh G4 is a 4-inch PWM-controlled EC inline fan from Vivosun for tent exhaust, intake or a 4" carbon filter. It's rated up to 195 CFM on 20 watts, and the E12 controller that comes with it offers ten speed steps plus timed on/off cycling.
Airflow: up to 195 CFM at 2,600 RPM
Power: 20 W PWM-controlled EC motor, 110–240 V, 50/60 Hz
Noise: 39 dBA
E12 controller: 10 PWM speeds, remembers the last speed after a power loss, 3 on/off cycle modes
Upgradeable to a Vivosun GrowHub E42A controller for app control (sold separately)
Fan body: 11.8" x 7.8" x 7.4" with 4" duct collars; PP and alloy-steel housing
IP44
1.8 m power cord; 3 m cord to the controller
The AeroZesh T6 is Vivosun's 6-inch EC inline fan for exhausting a grow tent or pulling air through a 6" carbon filter. It moves up to 408 CFM on 35 watts at 32 dBA, and the included E12 controller gives you ten PWM speed steps and remembers your setting after a power cut.
Airflow: up to 408 CFM at 3,000 RPM
Power: 35 W EC motor, 110–240 V, 50/60 Hz
Noise: 32 dBA
E12 controller: 10 PWM speeds, remembers the last speed after a power loss, 3 on/off cycle modes
Upgradeable to a Vivosun GrowHub E42A controller for app control (sold separately)
Fan body: 12.4" x 8" x 8.7" with 6" duct collars; PP and alloy-steel housing
NMB ball bearing rated 67,000 hours; IP44
2 m power cord; 3 m cord to the controller
In the box: fan, E12 controller, Type-C extension cable, 2 rope hangers, 4 screws and 4 wall anchors.
The AeroZesh T4 is Vivosun's 4-inch EC inline fan for exhausting a grow tent or pulling air through a 4" carbon filter. It moves up to 210 CFM on 20 watts at 28 dBA, and the included E12 controller gives you ten PWM speed steps and remembers your setting after a power cut.
Airflow: up to 210 CFM at 3,000 RPM
Power: 20 W EC motor, 110–240 V, 50/60 Hz
Noise: 28 dBA
E12 controller: 10 PWM speeds, remembers the last speed after a power loss, 3 on/off cycle modes
Upgradeable to a Vivosun GrowHub E42A controller for app control (sold separately)
Fan body: 11.9" x 7" x 7.8" with 4" duct collars; PP and alloy-steel housing
NMB ball bearing rated 67,000 hours; IP44
2 m power cord; 3 m cord to the controller
In the box: fan, E12 controller, Type-C extension cable, 2 rope hangers, 4 screws and 4 wall anchors.
The Airone6 builds a 6" EC inline fan and an activated carbon filter into one housing, so a 4' x 4' or 5' x 5' tent gets exhaust and odor control from a single unit. The filter comes out separately when it's time to replace it, and a pre-filter traps larger particles to help it last.
Airflow: 305 CFM · 3,750 RPM · 6" (150 mm) duct
EC motor with built-in speed controller
Power: 48 W ±5% · AC 100–240 V, 50/60 Hz
Filter: high-iodine-value activated carbon, removable and replaceable on its own; pre-filter included
Suits 4' x 4' and 5' x 5' grow tents
MarsPro app control; works with the Mars Hydro iControl and iHub Pro (sold separately)
Operates from -4 to 140°F (-20 to 60°C)
In the box: 1 x inline fan with carbon filter, 1 x speed controller, 1 x 4 m (13 ft) ducting, 1 x noise-dampening foam, 1 x power cord, 2 x steel clamps, 2 x steel hangers, 1 x duct vent cover.
The complete iFresh 6" set bundles Mars Hydro's 402 CFM EC inline fan and a refillable carbon filter with a 6" clip fan, ducting and a handful of tent extras: grow bags, a grow net, scissors and grow-room glasses. Fan speed is set with the speed controller, and the iFresh MarsPro Add-On Pack (sold separately) adds app control.
Inline fan: iFresh 6" EC, up to 402 CFM (approx. 682 m³/h), PWM speed control
Fan power: 62 W ±5%, 0.94 A max · 110–240 VAC, 50/60 Hz
Fan noise: 32 dBA (Mars Hydro lab, no-load)
Fan size: 12.3" x 8.2" x 5.8" (31.3 x 20.8 x 14.7 cm) · IP44
Refillable carbon filter for odor control
Control: speed controller; MarsPro app control with the iFresh MarsPro Add-On Pack (sold separately)
In the box: iFresh 6" inline duct fan, carbon filter, duct, 3 x steel hoops, 4 x 5-gallon grow bags, grow net, 6" clip fan, 6" scissors, glasses, 2 x ventilation mesh covers, 2 x grow tent corner brackets.
The complete iFresh 4" set bundles Mars Hydro's 205 CFM EC inline fan and a refillable carbon filter with a 6" clip fan, ducting and a handful of tent extras: grow bags, a grow net, scissors and grow-room glasses. Fan speed is set with the speed controller, and the iFresh MarsPro Add-On Pack (sold separately) adds app control.
Inline fan: iFresh 4" EC, up to 205 CFM (approx. 348 m³/h), PWM speed control
Fan power: 27 W ±5%, 0.4 A max · 110–240 VAC, 50/60 Hz
Fan noise: 26 dBA (Mars Hydro lab, no-load)
Fan size: 11.9" x 6.4" x 3.8" (30.2 x 16.3 x 9.7 cm) · IP44
Refillable carbon filter for odor control
Control: speed controller; MarsPro app control with the iFresh MarsPro Add-On Pack (sold separately)
In the box: iFresh 4" inline duct fan, carbon filter, duct, 3 x steel hoops, 4 x 5-gallon grow bags, grow net, 6" clip fan, 6" scissors, glasses, 2 x ventilation mesh covers, 2 x grow tent corner brackets.
The GGS version of Spider Farmer's 2-in-1 ventilation system: a 6-inch inline fan with the activated carbon filter built into the housing, run by the GGS smart controller and its temperature and humidity sensor. One unit handles exhaust and odor control, the carbon cartridge is replaceable, and the included expanders leave room to add other Spider Farmer smart devices.
Airflow: 305 CFM fan only; 157 CFM through the built-in filter
Power: 48 W ±5% · Voltage: AC 100–240 V, 50/60 Hz · 3,750 RPM
Noise: 56 dB max
Size: 48.7 x 19.6 cm (19.2" x 7.7")
GGS controller connects directly to the fan unit (no separate power supply)
Replaceable carbon filter cartridge · operating temperature -20 to 60 °C (-4 to 140 °F)
Net weight: 6.1 kg (13.4 lb)
In the box: fan with built-in carbon filter, GGS controller, temperature and humidity sensor, AP10 and AP4 expanders, 6 RJ12 cables, 4 m (13 ft) ducting, noise-dampening foam, power cord, 2 steel clamps, 2 steel hangers, duct vent cover.
Spider Farmer's 2-in-1 ventilation system builds the activated carbon filter into the fan housing, so a 6-inch exhaust setup is one unit instead of a separate fan, filter and extra duct run. The carbon cartridge is replaceable, noise-dampening foam comes in the box, and the speed controller can be swapped for a Spider Farmer GGS controller when you want app control.
Airflow: 345 CFM fan only; 157 CFM through the built-in filter
Power: 62 W ±5% · Voltage: AC 100–240 V, 50/60 Hz · 4,000 RPM
Noise: 60 dB max
Size: 48.7 x 19.6 cm (19.2" x 7.7")
Replaceable carbon filter cartridge
Operating temperature: -20 to 60 °C (-4 to 140 °F)
Net weight: 6.1 kg (13.4 lb)
In the box: fan with built-in carbon filter, speed controller, 4 m (13 ft) ducting, noise-dampening foam, power cord, 2 steel clamps, 2 steel hangers, duct vent cover.
Spider Farmer's smart 6-inch ventilation kit combines the 402 CFM EC inline fan, a 6-inch carbon filter with pre-filter, ducting and the GGS controller with a temperature and humidity sensor. The fan can run on schedules or react to temperature and humidity from the Spider Farmer app, and the kit is sized for 4' x 4' and 5' x 5' tents.
Fan: 402 CFM, 62 W EC motor
Duct size: 6" (15.2 cm) · Fan body: 12.4" x 8.9" x 8.3" (31.5 x 22.5 x 21 cm)
Carbon filter: 10" x 10" x 8.8" (25.5 x 25.5 x 22.5 cm)
GGS controller: four operating modes, start/stop times, separate running and standby speeds, CO2 device on/off control
Controller connects directly to the fan (no separate power supply)
Recommended for 120 x 120 and 150 x 150 cm tents
In the box: 6-inch inline fan, 6-inch carbon filter, pre-filter, GGS controller, temperature and humidity sensor, light adapter, ducting, 2 duct filter vent covers, 4 steel hangers, 3 clamps, 6 RJ12 cables, RJ12 splitter.
The 8-inch PRO kit pairs an upgraded 807 CFM CLOUDLINE PRO fan with a smart climate controller you can program with temperature and humidity triggers, schedules and cycles, then check from the Wi-Fi app. An 8-inch Australian charcoal carbon filter and 25 feet of ducting complete the setup.
Fan: 8" CLOUDLINE PRO inline fan with PWM-controlled EC motor, 807 CFM, 39 dBA, 746 Pa static pressure
Power: 100–240 V AC; 180 W max, 78 W average draw
Controller: smart climate controller with triggers, schedules, cycles and Wi-Fi app access (5.19" x 2.91" x 1.06")
Carbon filter: 38 mm bed of Australian virgin RC412 charcoal, 1200+ IAV, rated to 770 CFM
Ducting: 8" x 25 ft four-layer flexible ducting with spiral steel wire
Fan: 8.54" x 11.89" x 9.17"; filter: 19.8" x 10.94"
Dual ball bearings rated for 67,000 hours (L10) · IP44 · CE, RoHS
In the box: inline fan, climate controller, carbon filter, 8" x 25 ft ducting, duct clamps, pre-filter cloth, rope clip hangers and hanging straps.
This is the iFresh 6" fan-and-filter kit with Mars Hydro's 2026 iControl smart controller included, for ventilation and odor control you can run from the MarsPro app. The fan moves up to 402 CFM on 62 watts.
Kit: iFresh 6" EC inline duct fan, 6" refillable carbon filter and 2026 iControl smart controller
Fan airflow: up to 402 CFM (approx. 682 m³/h) · Static pressure: 419 Pa ±10%
EC motor with PWM speed control · 3,000 RPM ±10%
Power: 62 W ±5%, 0.94 A max · 110–240 VAC, 50/60 Hz
Fan size: 12.3" x 8.2" x 5.8" (31.3 x 20.8 x 14.7 cm) · IP44
The iControl is powered from the fan (it has no power cord of its own)
App control through the iControl and the MarsPro app
This is the iFresh 4" fan-and-filter kit with Mars Hydro's iControl smart controller included, so your ventilation can run itself. Through the iControl and the MarsPro app you can watch temperature, humidity and lighting, set schedules and let the fan speed adjust automatically.
Kit: iFresh 4" EC inline duct fan, 4" refillable carbon filter and iControl smart controller
Fan airflow: up to 205 CFM (approx. 348 m³/h) · Static pressure: 347 Pa ±10%
EC motor with PWM speed control · 3,000 RPM ±10%
Power: 27 W ±5%, 0.4 A max · 110–240 VAC, 50/60 Hz
Fan size: 11.9" x 6.4" x 3.8" (30.2 x 16.3 x 9.7 cm) · IP44
Activated carbon filter for odors, smoke and VOCs; refill the carbon core instead of replacing the filter
MarsPro app through the iControl: climate monitoring, schedules and automatic fan speed
The iFresh 6" kit pairs Mars Hydro's 402 CFM EC inline fan with a refillable Australian-charcoal carbon filter, a speed controller and the ducting and hardware to hang it all. It's smart-ready too: add the iFresh MarsPro Add-On Pack (sold separately) for app control, alarms and schedules.
Fan airflow: up to 402 CFM (approx. 682 m³/h) · Static pressure: 419 Pa ±10%
EC motor with PWM speed control · 3,000 RPM ±10%
Power: 62 W ±5%, 0.94 A max · 110–240 VAC, 50/60 Hz
Noise: 32 dBA (Mars Hydro lab, no-load)
Fan size: 12.3" x 8.2" x 5.8" (31.3 x 20.8 x 14.7 cm)
Australian activated charcoal carbon filter with a refillable core, for odors, smoke and VOCs
IP44 · Operates from -4 to 140°F (-20 to 60°C)
In the box: 1 x iFresh 6" inline duct fan, 1 x 6" carbon filter, 1 x speed controller, 1 x flexible duct, 3 x duct clamps, 2 x hanging straps.
A ready-to-hang odor control setup for a small tent: the iFresh 4" EC inline fan, a refillable carbon filter, a speed controller and the ducting and hardware to tie them together. The fan moves up to 205 CFM on 27 watts and is smart-ready for the MarsPro app with the iFresh MarsPro Add-On Pack (sold separately).
Fan airflow: up to 205 CFM (approx. 348 m³/h) · Static pressure: 347 Pa ±10%
EC motor with PWM speed control · 3,000 RPM ±10%
Power: 27 W ±5%, 0.4 A max · 110–240 VAC, 50/60 Hz
Noise: 26.8 dBA (Mars Hydro lab, no-load)
Fan size: 11.9" x 6.4" x 3.8" (30.2 x 16.3 x 9.7 cm)
Activated charcoal carbon filter with a refillable core: replace the carbon, not the whole filter
IP44 · Operates from -4 to 140°F (-20 to 60°C)
In the box: 1 x iFresh 4" inline duct fan, 1 x 4" carbon filter, 1 x speed controller, 1 x flexible duct, 3 x duct clamps, 2 x hanging straps.
This is Spider Farmer's smart 4-inch ventilation kit: the 205 CFM EC inline fan, a 4-inch carbon filter with pre-filter, ducting and the GGS controller with a temperature and humidity sensor. From the Spider Farmer app the fan can run at a set speed from 25 to 100%, on start/stop schedules, or react to temperature and humidity. It fits tents from 2' x 2' up to 2.3' x 4.6'.
Fan: 205 CFM at 26.8 dB(A), 27 W ±5% EC motor, 3,000 RPM, AC 110–240 V
Duct size: 4" (10.1 cm) · Fan body: 11.99" x 8" x 7.5" (30.3 x 20.2 x 19 cm)
Carbon filter: 11.8" x 10" x 6.8" (30 x 25.5 x 17.5 cm), Australian charcoal, grade 1200+
GGS controller: four operating modes, start/stop times, separate running and standby speeds, CO2 device on/off control
Controller connects directly to the fan (no separate power supply); 8.2 ft (2.5 m) fan-to-controller cable
Recommended for 60 x 60, 70 x 70, 90 x 90, 60 x 120 and 70 x 140 cm tents
In the box: 4-inch inline fan, 4-inch carbon filter, pre-filter, GGS controller, temperature and humidity sensor, adapter, ducting, 2 duct filter vent covers, 4 steel hangers, 3 clamps, 6 RJ12 cables, RJ12 splitter.
Spider Farmer's 6-inch exhaust kit pairs the 402 CFM EC inline fan with a 6-inch carbon filter, ducting and hanging hardware, sized for 4' x 4' and 5' x 5' tents. It runs on the included RJ12 speed controller, whose 8.2 ft cable lets you set airflow from outside the tent, and it's ready to move to a Spider Farmer GGS controller later.
Fan: 402 CFM at about 32 dB, 62 W EC motor
Duct size: 6" (15.2 cm) · Fan body: 12.4" x 8.9" x 8.3" (31.5 x 22.5 x 21 cm)
Carbon filter: 10" x 10" x 8.8" (25.5 x 25.5 x 22.5 cm), Australian charcoal
Speed controller with RJ12 port on an 8.2 ft (2.5 m) cable; GGS controller compatible (sold separately)
Recommended for 120 x 120 and 150 x 150 cm tents
In the box: 6-inch inline fan, 6-inch carbon filter, speed controller, ducting, 4 steel hangers, 2 duct filter vent covers, 3 steel clamps.
A complete 4-inch exhaust setup for small tents: Spider Farmer's 205 CFM EC inline fan, a matching 4-inch carbon filter, ducting and the hardware to hang it all. The RJ12 speed controller runs the fan out of the box, and the fan can move to a Spider Farmer GGS controller later for app control.
Fan: 205 CFM at 26.8 dB(A), 27 W ±5% EC motor, AC 110–240 V
Duct size: 4" (10.1 cm) · Fan body: 11.99" x 8" x 7.5" (30.3 x 20.2 x 19 cm)
Carbon filter: 11.8" x 10" x 6.8" (30 x 25.5 x 17.5 cm), Australian charcoal
Speed controller with RJ12 port; GGS controller compatible (sold separately)
Recommended for 60 x 60, 70 x 70, 90 x 90, 60 x 120 and 70 x 140 cm tents
In the box: 4-inch inline fan, 4-inch carbon filter, speed controller, ducting, 4 steel hangers, 2 duct filter vent covers, 3 steel clamps.
An 8-inch ventilation and odor-control package for big tents and small rooms: a 724 CFM CLOUDLINE inline fan with a 10-speed controller, an 8-inch Australian charcoal carbon filter and 25 feet of ducting, all sized to go together.
Fan: 8" CLOUDLINE inline fan, 724 CFM (fan only), 42 dBA, 746 Pa static pressure
Power: 100–240 V AC; 190 W max, 72 W average draw
Controller: 10-speed PWM speed controller; the fan also works with AC Infinity CONTROLLER 69, 67 and 63
Carbon filter: 38 mm bed of Australian virgin RC412 charcoal, 1200+ IAV, rated to 770 CFM, reversible aluminum flanges
Ducting: 8" x 25 ft four-layer flexible ducting with spiral steel wire
Fan: 12.20" x 10" x 9.37"; filter: 19.8" x 10.94"
Dual ball bearings rated for 67,000 hours (L10) · IP44 · CE, RoHS
In the box: inline fan, 10-speed controller, carbon filter, 8" x 25 ft ducting, duct clamps, pre-filter cloth, rope clip hangers and hanging straps.
The 6-inch PRO kit runs an upgraded 402 CFM CLOUDLINE fan from an AI-powered environment controller that reads your climate patterns and adjusts airflow before temperature and humidity spike. It ships with a thick-bed 6-inch carbon filter and 25 feet of ducting.
Fan: 6" CLOUDLINE inline fan with PWM-controlled EC motor, 402 CFM, 34 dBA, 394 Pa static pressure
Power: 100–240 V AC; 70 W max, 38 W average draw
Controller: AI-powered environment controller with Wi-Fi app access (5.8" x 3.42" x 0.94")
Carbon filter: 60 mm bed of Australian virgin RC412 charcoal, 1200+ IAV, rated to 410 CFM
Ducting: 6" x 25 ft four-layer flexible ducting with spiral steel wire
Fan: 7.87" x 12.60" x 8.35"; filter: 15.94" x 8.93"
Dual ball bearings rated for 67,000 hours (L10) · IP44 · fan is CE, ETL, RoHS and SAA certified
In the box: inline fan, AI controller, carbon filter, 6" x 25 ft ducting, duct clamps, pre-filter cloth, rope clip hangers and hanging straps.