Dosatron

The Dilution Solutions Flow Restrictors limit the flow of liquid in the line. It is recommended to install a flow restrictor on the inlet side of the Dosatron unit if there is any possibility of overflowing the unit. 3/4 in female NPT 14 GPM Max. Made of PVC.

Read more less

Simplify your nutrient feeding regiment by installing Dosatron Water Powered Dosing systems directly into the water supply line, allowing for direct inline feeding or filling reservoir tanks. The Dosatron Dosers operate by using water pressure as the power source (no electricity needed) which activates the doser by taking up the required percentage of concentrate and mixing it with water inside the unit. The water pressure then forces the solution downstream allowing you to daisy-chain the dosers to integrate all of your nutrients and supplements into a complete streamlined feeding system. All of the D-25 Series dosers include a mounting bracket, suction hose, bypass, union, weighted strainer, and a quick start guide. Operating pressure range is 4.3 to 85 PSI and water flow range is 0.05 to 11 GPM (0.19 to 42 LPM) Injection capabilities: 1:1000 - 1:112 (0.1 to 0.9%) 0.128 - 1.280 oz/gal (4 to 34 mL/gal) [D25RE09VFBPHY] Additional parts necessary for complete system operation: ‚Äö√Ѭ¢ 110398 - Dilution Solutions Water Hammer Arrestor Kit - 3/4 in [WHA34-SS-KIT] ‚Äö√Ѭ¢ 110387 - Dilution Solutions Nutrient Delivery System Starter Kit - 3/4 in [HYKSTART] Optional parts: ‚Äö√Ѭ¢ 110390 - Dilution Solutions Nutrient Delivery System Mixing Chamber Kit - 3/4 in [HYKMC34] ‚Äö√Ѭ¢ 110396 - Dilution Solutions Nutrient Delivery System Monitor Kit - 3/4 in [HYKMON] ‚Äö√Ѭ¢ 110381 - Etatron eOne Micro-Doser Kit - 3/4 in [MDE0110MF.75KIT]

Read more less

Simplify your nutrient feeding regiment by installing Dosatron Water Powered Dosing systems directly into the water supply line, allowing for direct inline feeding or filling reservoir tanks. The Dosatron Dosers operate by using water pressure as the power source (no electricity needed) which activates the doser by taking up the required percentage of concentrate and mixing it with water inside the unit. The water pressure then forces the solution downstream allowing you to daisy-chain the dosers to integrate all of your nutrients and supplements into a complete streamlined feeding system. All of the D-25 Series dosers include a mounting bracket, suction hose, bypass, union, weighted strainer, and a quick start guide. Operating pressure range is 4.3 to 85 PSI and water flow range is 0.05 to 11 GPM (0.19 to 42 LPM) Injection capabilities: 1:500 - 1:50 (0.2 to 2%) 0.256 - 2.560 oz/gal (7.5 to 75 mL/gal) [D25RE2VFBPHY] Additional parts necessary for complete system operation: ‚Äö√Ѭ¢ 110398 - Dilution Solutions Water Hammer Arrestor Kit - 3/4 in [WHA34-SS-KIT] ‚Äö√Ѭ¢ 110387 - Dilution Solutions Nutrient Delivery System Starter Kit - 3/4 in [HYKSTART] Optional parts: ‚Äö√Ѭ¢ 110390 - Dilution Solutions Nutrient Delivery System Mixing Chamber Kit - 3/4 in [HYKMC34] ‚Äö√Ѭ¢ 110396 - Dilution Solutions Nutrient Delivery System Monitor Kit - 3/4 in [HYKMON] ‚Äö√Ѭ¢ 110381 - Etatron eOne Micro-Doser Kit - 3/4 in [MDE0110MF.75KIT]

Read more less

The Dilution Solutions Inline Filter Kit with Unions includes a 200 mesh / 80 micron stainless steel filter that is cleanable (no replacement cartridges necessary). The inline connector unions are 3/4 in FPT. Parts ordered may look slightly different than the picture displayed but the fit and function will be the same. Made of Polypropylene.

Read more less

The Dilution Solutions Water Hammer Arrestor Kits include everything you need to stop water hammer on your system. The kits include a water hammer arrestor, tee, 4 in nipple, elbow, close nipple, union, and roll of seal thread tape. Assembly required.

Read more less

The Dilution Solutions Water Hammer Arrestor Kits include everything you need to stop water hammer on your system. The kits include a water hammer arrestor, tee, 4 in nipple, elbow, close nipple, union, and roll of seal thread tape. Assembly required.

Read more less

The Dilution Solutions Nutrient Delivery System Mixing Chamber Kit is key to a successful dosing system that gives you a homogenized solution blend. This kit includes the mixing chamber and all necessary plumbing connections to install into the system.

Read more less

The Dilution Solutions Nutrient Delivery System Mixing Chamber Kit is key to a successful dosing system that gives you a homogenized solution blend. This kit includes the mixing chamber and all necessary plumbing connections to install into the system.

Read more less

The Dilution Solutions Nutrient Delivery System Mixing Chamber Kit is key to a successful dosing system that gives you a homogenized solution blend. This kit includes the mixing chamber and all necessary plumbing connections to install into the system.

Read more less

Protect your Dilution Solutions Nutrient Delivery System with all the necessary accessories for a successful installation. Includes incoming on/off ball valve, an in-line pre-filter with 200 mesh (80 micron) screen, a pressure regulator with gauge (except for "DAB" kit), a fresh water test port, a check valve and all necessary plumbing connections to put it all together. Assembly required. For a complete Nutrient Delivery System, we recommend a Starter Kit, Mixing Chamber Kit(s), Monitor Kit, and a Water Hammer Arrestor Kit.

Read more less

Protect your Dilution Solutions Nutrient Delivery System with all the necessary accessories for a successful installation. Includes incoming on/off ball valve, an in-line pre-filter with 200 mesh (80 micron) screen, a pressure regulator with gauge (except for "DAB" kit), a fresh water test port, a check valve and all necessary plumbing connections to put it all together. Assembly required. For a complete Nutrient Delivery System, we recommend a Starter Kit, Mixing Chamber Kit(s), Monitor Kit, and a Water Hammer Arrestor Kit.

Read more less