The Apollo 6 - 24 hr timer is the perfect timing solution for your hydro systems. With a 12 Amp capacity, it's easy to set to run your pumps, fans, etc. The Apollo¥ 6 has 96 non-detachable 15 min trippers and can be configured in numerous timing schedules to meet the most demanding timing requirements. One (1) outlet. 15 min intervals. Heavy-duty construction. Easy to use and simple to operate. Enclosure resists dust, rust and moisture. 12 Amps maximum/120 V/60 Hz.
Complete control of your grow room from up to 150 ft away without wires, the Hyperion1 Wireless/Environmental/Lighting controller is the solution! Monitor and control the CO2, temperature and humidity during the day night periods. Then add a fully functional lighting controller (via trigger cordsets) that includes a high temp shut-off, 15 min cool down with preset and custom lighting schedules. It even tells you when to change your grow bulb. 15 Amps maximum/120 V / 60 Hz. US Patent No. D660,252.
The Titan Controls Helios 8 is a Professional Series 8-light controller. With the attached dual trigger cords you can establish two separate lighting schedules. The Titan Controls Helios 8 was constructed with commercial-grade "ballast-rated" relays. It works with both 120V and 240V power cords and can be hooked up through a 50 amp input circuit.
Compatible with Titan Controls CO2 Controllers or other 120 Volt controllers and timers. Precision accuracy flow meter 0.5 to 15 SCF/hour. Features heavy-duty solenoid valve. High-quality oilless pressure gauge. Includes two plastic tank washers and 12 ft of CO2 dispensing line. Brass construction for long-lasting dependability and durability. 1 Amp/120 V/ 60 Hz.
The 8 light controller operates up to 8000 W of grow lights in your garden. It features heavy-duty definite purpose contactors, dual trigger cord sets that give you the flexibility to stagger lighting schedules or delay starting times via an external wall timer and universal outlets that allow the use of 120 V or 240 V cord sets. The controller is housed in a rust-, dust- and moisture-proof enclosure. 50 Amps input power/40 Amps output power/240 V/60 Hz/8000 W.
Built to the high levels of quality Titan Controls is known for, the Spartan Series CO2 Controller/Monitor allows you to supercharge your garden at an affordable price. Capable of controlling both a CO2 regulator or a CO2 generator, this controller gives you precise control over the ppm levels in your garden. Using a Dual Beam NDIR (Non-Dispersive Infrared) sensor, you can monitor your CO2 levels up to 3000 ppm. The unit will also monitor your temperature as well. A built-in photocell ensures that CO2 is only dispersed during the daylight time. The plastic housing resists dust and moisture. 15 Amps Maximum/120 V/60 Hz.
Replacement parts for Titan Controls CO2 Regulators. The white plastic washers are replacements for the Titan CO2 Regulator or the Titan CO2 Inline Heater.
The Apollo 9 - 24 hr digital timer is the perfect timing solution for your hydro systems. With two outlets and a 15 Amp capacity, it's easy to set to run your pumps, fans, etc. The Apollo 9 may be set to 1 min intervals and run 8 separate schedules per day. It can be configured in numerous timing schedules to meet the most demanding timing requirements. Two (2) outlets with 1 min intervals. Battery backup feature saves settings if power goes out. Enclosure resists dust, rust and moisture. 15 Amps maximum/120 V/60 Hz. HINT: If not functioning properly, plug in for 5 min and press the reset button. This generally fixes any problem.
This CO2 Rain System includes 25 ft of laser-drilled 1/8 in tubing, 6 eye hooks, 1/8 in plastic T fitting and instructions. Additional 100 ft roll of tubing is also available.
One (1) outlet. 1 min intervals and run up to 20 schedules per day. Battery backup feature saves settings in case of power failure. Heavy-duty construction. Daylight savings mode to accommodate time change. Enclosure resists dust, rust and moisture. Runs lights, pumps, fans, etc. 10 Amps maximum/240 V/60 Hz.
The Apollo 10 240 V /24 hr timer is the perfect timing solution for your hydroponic systems. With a 10 Amp capacity, it's easy to set to run your pumps, fans, etc. The Apollo 10 has 96 non-detachable 15 min trippers and can be configured in numerous timing schedules. One (1) outlet with 15 min intervals. Heavy-duty construction that is easy to use and simple to operate. Enclosure resists dust, rust and moisture. Only the highest-quality components are used. 10 Amps maximum/240 V/60 Hz.
The 4 light controller operates up to 4000 W of grow lights in your garden. It features heavy-duty definite purpose contactor, trigger cord set that activates your lights via an external wall timer and universal outlets that allow the use of 120 V or 240 V cord sets. The controller is housed in a rust-, dust- and moisture-proof enclosure. 30 Amps input power/20 Amps output power/240 V/60 Hz/4000 W.
