Light Rail

The RoboBar lets a LightRail 3.5 or 4.0 motor carry a larger LED fixture smoothly. Its 34" x 30" frame hangs the light from four corners at steep, triangulated angles, so a big, flat LED doesn't swing as it moves. 34" x 30" (86 x 75 cm) Two outriggers, one center bar, two heavy-duty T-bar connectors and four corner eye screws Two individually secured connectors to the motor, with Nyloc nuts For LightRail 3.5 and 4.0 motors Motor, rail and light not included

Read more less

The same Auxiliary Trolley used in the Add-A-Lamp kit, sold on its own. Use it to carry a second light, or to support vent tubing and power cords so they travel with the motor. Extreme Duty trolley wheels, rated to 60 lb Trolley only, no hardware Works with LightRail 3.0, 3.5, 4.0 and 4.20

Read more less

A LightRail 3.5 IntelliDrive kit paired with the RoboBar, built to move larger LED fixtures. The RoboBar's triangulated hanging points keep a big, flat LED steady as it travels, so each light covers more of the room. LightRail 3.5 IntelliDrive motor: about 4 ft per minute, 0 to 60 second pause at each end Two-piece 2 m (6'6") rail, hardware and instructions RoboBar: two outriggers, center bar, two heavy-duty T-bar connectors and four corner eye screws Extreme Duty trolley wheels preinstalled, rated to 60 lb Grow light not included Made in the USA by Gualala Robotics; 2-year limited warranty on the motor

Read more less

A LightRail 4.0 AdjustaDrive kit paired with the RoboBar for moving larger LED fixtures. Variable speed from 2 to 4 feet per minute, and the RoboBar's triangulated hanging points keep a big, flat LED from swinging as it travels. LightRail 4.0 AdjustaDrive motor: 2 to 4 ft per minute, 0 to 60 second pause at each end Two-piece 2 m (6'6") rail, hardware and instructions RoboBar: 34" x 30" (86 x 75 cm) with two outriggers, center bar, two heavy-duty T-bar connectors and four corner eye screws Extreme Duty trolley wheels preinstalled, rated to 60 lb Grow light not included Made in the USA by Gualala Robotics; 2-year limited warranty on the motor

Read more less

Extreme Duty trolley wheels with sealed precision steel ball bearings. They've come standard on LightRail 3.5 and 4.0 motors and Auxiliary Trolleys since October 2020; for older motors they're the upgrade for heavier lights such as LEDs or lights with a built-in ballast. Rated to 60 lb per set Sealed precision steel ball bearings for humid grow rooms Lifetime warranty Works with LightRail 3.0, 3.5, 4.0 and 4.20

Read more less

Rail Hanger Brackets are the easiest way to hang LightRail rail from the support bars of a grow tent or greenhouse. Pack of 4 with instructions and zip ties: two per rail, so one pack hangs two rails Fits tubing up to 1.5" in diameter Holds the rail perpendicular to the support bar For LightRail 3.0, 3.5, 4.0 and 4.20 rail

Read more less

The 24" RoboStik turns a horizontal grow light 90 degrees to the direction of travel, so the light sweeps a wider pattern as it moves along the rail. 24" stabilizing bar Hangs a horizontal light perpendicular to the rail Not needed when the light hangs parallel to the direction of travel Works with LightRail 3.0, 3.5, 4.0 and 4.20

Read more less

The LightRail 5.0 motor alone, for LightRail 5.0 systems. Its high-torque 4 RPM drive and steel-on-steel carrier bearings move crossbars carrying several lights side by side or fore and aft. High-torque 4 RPM instrument-grade drive motor with ball-bearing output shaft Dual-drive "sure grip" design with steel-on-steel carrier bearings Moves up to 9 lights (6 with larger reflectors) on crossbars For LightRail 5.0 only; not compatible with 3.5, 4.0 or 4.20 parts Motor only: no rail, mounting hardware or switch stops included Made in the USA by Gualala Robotics

Read more less

The Add-A-Bar Kit adds a second crossbar to a LightRail 5.0 system so one motor can carry more lights side by side. LightRail 5.0 Auxiliary Trolley Adjustable crossbar: 81", 87" or 93" wide Push/pull rod, mounting hardware and instructions A third crossbar also needs a 4 ft LightRail 5.0 Auxiliary Rail (sold separately) For LightRail 5.0 only

Read more less

The LightRail 4.0 AdjustaDrive motor without rail, for growers who already have LightRail rail in place. Speed is adjustable from 2 to 4 feet per minute, with an adjustable pause at each end of the run. Adjustable speed: 2 to 4 ft (0.6 to 1.2 m) per minute 0 to 60 second adjustable time delay at each end Extreme Duty trolley wheels preinstalled, rated to 60 lb Includes switch stops, hardware and instructions Rail not included Made in the USA by Gualala Robotics; 2-year limited warranty

Read more less

The LightRail 3.5 IntelliDrive is Light Rail's most popular light mover. The 10 RPM motor carries your grow light back and forth along the rail at about 4 feet per minute, with an adjustable pause at each end so plants get even light from one end of the run to the other. Motor travels about 4 ft (1.2 m) per minute (10 RPM) 0 to 60 second adjustable time delay at each end of travel Adjustable travel distance with switch stops Extreme Duty trolley wheels preinstalled, rated to 60 lb (lifetime warranty on the wheels) Low-draw motor: about 5 W In the box: motor, two-piece 2 m (6'6") rail, hardware and instructions Made in the USA by Gualala Robotics; 2-year limited warranty

Read more less

The LightRail 3.5 IntelliDrive motor on its own, for adding a second run to rail you already have or replacing an older motor. It moves a grow light about 4 feet per minute with an adjustable pause at each end of the rail. 10 RPM motor, about 4 ft (1.2 m) per minute 0 to 60 second adjustable time delay at each end Extreme Duty trolley wheels preinstalled, rated to 60 lb Includes switch stops, hardware and instructions Rail not included Made in the USA by Gualala Robotics; 2-year limited warranty

Read more less

The LightRail 4.0 AdjustaDrive adds speed control to the light mover: set the motor anywhere from 2 to 4 feet per minute to suit your light and the length of the run, plus an adjustable pause at each end for even coverage. Adjustable speed: 2 to 4 ft (0.6 to 1.2 m) per minute 0 to 60 second adjustable time delay at each end of travel Adjustable travel distance with switch stops Extreme Duty trolley wheels preinstalled, rated to 60 lb Motor draws about 9 W In the box: motor, two-piece 2 m (6'6") rail, hardware and instructions Made in the USA by Gualala Robotics; 2-year limited warranty

Read more less

The LightRail 4.20 moves two grow lights inline with one motor. It pairs the variable-speed 4.0 AdjustaDrive motor and rail with a complete Add-A-Lamp kit, so a second light rides its own rail, linked to the motor by a push/pull rod. LightRail 4.0 AdjustaDrive motor: 2 to 4 ft per minute, 0 to 60 second pause at each end Two-piece 2 m (6'6") motor rail plus a second two-piece 2 m rail for the Add-A-Lamp 6 ft push/pull rod and Auxiliary Trolley for the second light Extreme Duty trolley wheels preinstalled, rated to 60 lb Hardware and instructions included Optional: Add-A-Lamp to RoboStik hardware, to hang the second light sideways with a RoboStik Made in the USA by Gualala Robotics; 2-year limited warranty

Read more less

LightRail 3.5 IntelliDrive 10 RPM motor travels approximately 4 feet per minute and has a 0-60 second adjustable time delay for pausing the lamp at the ends of its travel. This helps to promote even growth from end to end and allows for equal light-time for the entire run. It comes complete with installation hardware, instructions and a 2-year manufacturer's warranty.Note: No rail is included. Great for customers who already have a rail or prefer the one-piece 2 meter rail.Light Rail 3.5 is rated to 35 lbs

Read more less