Developed with cuttings in mind, EZ-CLONE Rooting Compound is the superior gel that aids in root development; packed with all the essential ingredients roots need to begin a healthy life. Our Rooting Compound is specially formulated to yield rapid dense root growth for both softwood and hardwood cuttings. This water-based gel seals the tissue around the cut stem while supplying the proper hormones, full-spectrum mineral nutrients, and vitamins that are required for cuttings to promote abundant root cell development.
This unique formula was designed specifically for the EZ-CLONE Aeroponic Cloning Systems but works great with all forms of propagation.
The EZ-CLONE Low Pro System is a true aeroponic system. Every aspect of our patented aeroponic cloning system has been carefully thought out and designed with the utmost passion, to produce the most effective and user-friendly cloning system ever seen. The delicate plant base is suspended in air and is gently misted with an oxygen-rich solution. Just set it up and let it run. EZ-CLONE Low Pros require little maintenance. Because the cuttings do not dry out, the EZ-CLONE system requires NO humidity dome. Not only does this allow the plants to breathe and transpire, but it also drastically reduces the risk of airborne fungi such as powdery mildew and it eliminates plant stress. Get rooted and get growing.
Designed for Ease and Highest Yield:
Manufactured from durable UV protected HDPE plastic
Extended flange on the reservoir with drainage gutters
4-way finger slots for improved cloning collar extraction
State-of-the-art Reservoir design, with increased lip height, extended flange, and drainage gutters to ensure leak-proof cord design
Designed and Manufactured in the USA
Includes
EZ-CLONE 64 Site Lid and Reservoir
EZ-CLONE Clone Collars
Custom size EZ-CLONE Manifold
360° Misters
Water Pump (750 GPH)
Sample EZ-CLONE Clear Rez Solution and EZ-CLONE Rooting Compound
EZ-CLONE Product Information Guide
EZ-CLONE Product Warranty
The new EZ-Clone Lo Pro 128 Black overall height has been reduced by four inches, while increasing the structural integrity of the new proprietary Lid and Reservoir. Manufactured from durable UV protected HDPE plastic. The Lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings and comes with four way finger slots for improved Cloning Collar extraction. The Reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leak-proof design, and improved interface when opening the system to view cuttings. The water pump has an extended baseplate and additional suction cups to prevent tipping. It also includes four different colored cloning collars.
EZ-CLONE Clear Rez is a pH-balanced, non-invasive water treatment designed to keep all of the internal workings of your cloning system crystal clear and operating at peak performance. It is designed to be used through out your entire cloning cycle as a possible preventive measure for a multitude of problems in your reservoir. It is suitable for all hydroponic, aeroponic and soil applications. EZ-CLONE Clear Rez is currently available in 2 oz, 4 oz, 8 oz, 16 oz, 32 oz and one gallon container sizes to fit any grower's needs.
The EZ-Clone Low Pro 16 is a 16-site aeroponic cloning system. It uses the same aeroponic misting technology as EZ-Clone's larger systems in a lid and reservoir that are lower overall, so it suits cloning in small spaces. This listing is the black version.
Features
Lid and reservoir made from durable, UV-protected HDPE plastic.
Letters and numbers molded into the lid, so you can keep track of different varieties of cuttings.
Four-way finger slots make the cloning collars easier to pull out.
Raised reservoir lip, extended flange and drainage gutters for a leakproof fit.
Comes with a MAG 450 pump.
EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber.
EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber. Currently, EZ-CLONE Cloning Collars are available in a new high density Hard material as well as the same great Soft material that we have been using for years.
EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber. Currently, EZ-CLONE Cloning Collars are available in a new high density Hard material as well as the same great Soft material that we have been using for years.
EZ-CLONE Clear Rez is a pH-balanced, non-invasive water treatment designed to keep all of the internal workings of your cloning system crystal clear and operating at peak performance. It is designed to be used through out your entire cloning cycle as a possible preventive measure for a multitude of problems in your reservoir. It is suitable for all hydroponic, aeroponic and soil applications. EZ-CLONE Clear Rez is currently available in 2 oz, 4 oz, 8 oz, 16 oz, 32 oz and one gallon container sizes to fit any grower's needs.
EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber. Currently, EZ-CLONE Cloning Collars are available in a new high density Hard material as well as the same great Soft material that we have been using for years.
EZ-CLONE Clear Rez is a pH-balanced, non-invasive water treatment designed to keep all of the internal workings of your cloning system crystal clear and operating at peak performance. It is designed to be used through out your entire cloning cycle as a possible preventive measure for a multitude of problems in your reservoir. It is suitable for all hydroponic, aeroponic and soil applications. EZ-CLONE Clear Rez is currently available in 2 oz, 4 oz, 8 oz, 16 oz, 32 oz and one gallon container sizes to fit any grower's needs.
The new EZ-Clone 64 Lo Pro Black has been made from fully recyclable HDPE which is highly chemically resistant and extremely durable. Now has leak resistant cord outlet that allows multiple cords. Also has a specially designed recessed drain that allows for high protection and easy draining. These are just some of the 75 plus improvements designed specifically to make cloning even easier.
EZ-Clone is proud to announce the introduction of the brand new 32 Site Low Pro System. The overall height has been reduced, while increasing the structural integrity of the new proprietary lid and reservoir. It is manufactured from durable UV protected HDPE plastic. The lid has alpha numeric symbols formed directly into the plastic, which allows simple identification of multiple strains of cuttings and comes with four way finger slots for improved cloning collar extraction. The reservoir has an increased lip height, with an extended flange and drainage gutters, to ensure a leakproof design. These smaller systems utilize the same great Aeroponic Misting Technology as all of our larger systems. It's perfect for cloning a variety of plants in small areas.
EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber.
Specially designed for use in most aeroponic cloners. EZ-Clone® cloning collars are manufactured from a sterile material that is designed to hold and protect your cuttings without damaging delicate tissues. Pre-slit for easy insertion of cuttings. Available in hard collars, or the original soft collars.
EZ-CLONE Cloning Collars are designed specifically to be used in the EZ-CLONE Cloning System. They are manufactured from a sterile material and are engineered to protect and hold your cuttings upright in the lid, exposing the top leaves to air and light, while allowing the stems of your cuttings to be completely unrestricted to the inside of the misting chamber. Currently, EZ-CLONE Cloning Collars are available in a new high density Hard material as well as the same great Soft material that we have been using for years.
