CenturionPro
-
CenturionPro CenturionPro DBT4 Sorter Conversion Kit, 4 Size Grades, up to 125 lb/hr
The DBT4 Sorter Conversion Kit turns a CenturionPro DBT Model 4 dry batch trimmer into a size sorter in under 5 minutes, grading up to 125 lb/hr of dried flowers into four sizes. It runs off the DBT4's own variable speed control, so you can tune the sort rate to flower size, shape and density. Fits: CenturionPro DBT Model 4 only (machine not included) Four grades: Bigs (over 3/4"), Mids (over 1/2"), Smalls (over 1/4") and Fines (under 1/4") Capacity: up to 125 lb/hr Converts in under 5 minutes; tool-less disassembly Quick-release motor and electronics; full wash-down construction Stainless steel construction with food-grade materials In the box: sorter tumbler, sorter block and safety pin, large product chute, small product chute and food-grade plastic hopper.
$4,000.00
-
CenturionPro CenturionPro HPTT Bucker Stand for HP TableTop Bucker
The HPTT Bucker Stand is CenturionPro's own stand for the HP TableTop Bucker, setting the machine up at a stable, ergonomic working height for bucking. Fits: CenturionPro HPTT HP TableTop Bucker Genuine CenturionPro part Bucker sold separately
$835.00
-
CenturionPro CenturionPro Bucker Conveyor for HP1, HP3, GC1 and GC3 Buckers, Variable Speed
The CenturionPro Bucker Conveyor works with CenturionPro's stand-mounted buckers to carry bucked flowers away from the heads, keeping product moving on high-throughput bucking lines. Variable speed control comes standard. Fits: CenturionPro HP1, HP3 and GC3 buckers, and the GC1 when mounted on its stand Variable speed control standard Power: 110 V, 60 Hz (220 V / 50 Hz versions on request)
$4,590.00 $2,110.00
-
CenturionPro CenturionPro QC/Exit Conveyor for 3.0+ Trimmer
The CenturionPro 3.0+ QC/Exit Conveyor carries trimmed flowers out of a CenturionPro 3.0+ on a belt so your crew can inspect them and hand-finish anything that needs it. It is built for workflow and quality control on large commercial harvests. Fits: CenturionPro 3.0+ hybrid trimmer Quality-control and exit conveyor for the trimmer outfeed
$10,425.00 $2,700.00
-
CenturionPro CenturionPro QC/Exit Conveyor for Gladiator Trimmer
The CenturionPro Gladiator QC/Exit Conveyor carries trimmed flowers out of a CenturionPro Gladiator on a belt so your crew can inspect them and hand-finish anything that needs it. It is built to keep a commercial-scale trimming line moving with better quality control. Fits: CenturionPro Gladiator hybrid trimmer Quality-control and exit conveyor for the trimmer outfeed
$9,505.00 $2,380.00
-
CenturionPro CenturionPro QC/Exit Conveyor for Mini and Original Trimmers, Variable Speed
The CenturionPro QC/Exit Conveyor carries trimmed flowers out of a CenturionPro Mini or Original trimmer on a belt so your crew can inspect them and hand-finish anything that needs it. Variable speed control comes standard. Fits: CenturionPro Mini and Original hybrid trimmers Variable speed control standard Power: 110 V, 60 Hz (220 V / 50 Hz versions on request)
$5,380.00 $1,550.00
-
CenturionPro CenturionPro Infeed Conveyor for Mini and Original Trimmers, Variable Speed
The CenturionPro Infeed Conveyor feeds plant material into a CenturionPro Mini or Original trimmer at a steady, consistent and measurable rate. Variable speed control lets you set and hold the exact throughput you want. Fits: CenturionPro Mini and Original hybrid trimmers Variable speed control Power: 110 V, 60 Hz (220 V / 50 Hz versions on request)
$5,225.00 $1,455.00
-
CenturionPro CenturionPro GC3 Gentle Cut Triple Bucker with Stand, up to 24 lb/hr Dry
The CenturionPro GC3 puts three Gentle Cut blade-style bucker stations on one stand, cutting flowers off the stem instead of popping them off so large top flowers stay intact. It takes stems up to 3/8" and is rated for up to 24 lb/hr dry or 120 lb/hr wet; CenturionPro recommends bucking dry. Capacity: up to 24 lb/hr dry or 120 lb/hr wet Feed entry sizes: 3/16", 1/4" and 3/8" (max stem 3/8") Drive motors: 3 x 0.25 HP, 1,750 RPM, with variable speed control Power: 110 V, 60 Hz, single phase, 25 A input; 30 A circuit at 120 V Build: 304 stainless steel and aluminum Dimensions with stand: 102" L x 32.5" W x 55" H; weight 391 lb Optional bucker conveyor (sold separately) Warranty: 5 years on manufacturing defects In the box: GC3 bucker and GC3 bucker stand.
$13,495.00 $7,995.00
-
CenturionPro CenturionPro GC1 Gentle Cut Single Bucker, up to 8 lb/hr Dry
The CenturionPro GC1 is a blade-style Gentle Cut bucker that cuts flowers off the stem rather than popping them off, which helps keep large top flowers intact. It comes with a 1/4 HP blower and collection bag, takes stems up to 3/8" and is rated for up to 8 lb/hr dry or 40 lb/hr wet; CenturionPro recommends bucking dry. Capacity: up to 8 lb/hr dry or 40 lb/hr wet Feed entry sizes: 3/16", 1/4" and 3/8" (max stem 3/8") Drive motor: 0.25 HP, 1,750 RPM, with variable speed control Power: 110 V, 60 Hz, single phase, 6 A; 15 A circuit Build: 304 stainless steel and aluminum Dimensions without stand: 15" L x 27.5" W x 18" H; weight 65 lb Optional stand and bucker conveyor (sold separately) Warranty: 5 years on manufacturing defects In the box: GC1 bucker, variable speed control, 1/4 HP blower and collection bag.
$5,295.00 $2,995.00
-
CenturionPro CenturionPro GCM Gentle Cut Mini Bucker, Blade-Style, for Dry Plant Material
The CenturionPro GC Mini is a blade-style bucker that cuts flowers off the stem instead of pulling them off, which helps keep large top flowers intact. It works like a lawn mower: the blade sits below the faceplate while you guide the material across it by hand. CenturionPro recommends it for dry bucking and rates it at up to 4 lb/hr dry. Capacity: up to 4 lb/hr dry Feed entry sizes: 3/16", 1/4" and 3/8" (max stem 3/8") Drive motor: 0.25 HP, 1,750 RPM, with variable speed control Power: 110 V, under 6 A; not GFCI compatible Dimensions: 15" L x 17" W x 19" H; weight 46 lb Cleaning: remove the faceplate, clear buildup and wipe down with isopropyl alcohol Warranty: 2 years on manufacturing defects In the box: GC Mini bucker, variable speed control and collection bag.
$4,095.00 $1,695.00
-
CenturionPro CenturionPro HP3 Triple HP Bucker with Stand, Wet & Dry, up to 500 lb/hr Wet
The CenturionPro HP3 puts three HP bucker heads on one stand with industrial casters, so three operators can buck side by side. Each workstation has five feed holes from 3/16" to 3/4", and the machine is rated for up to 500 lb/hr wet or 100 lb/hr dry at full crew. Capacity: up to 500 lb/hr wet or 100 lb/hr dry (three operators) Three workstations, each with feed holes of 3/16", 1/4", 3/8", 1/2" and 3/4" Per head: pull speed 10 to 30 in/s, pull strength over 400 lb; continuous duty Drive motors: 3 x 0.75 HP, IP54, 1,690 RPM; variable speed, motor pulse and reverse Power: 120 V, 60 Hz, single phase, 15 A; 20 A circuit, not GFCI compatible Build: 304 stainless steel and aluminum; neoprene rubber rollers Dimensions with stand: 93" L x 32.5" W x 52" H; weight 471 lb Optional bucker conveyor (sold separately) Warranty: 10 years on defective parts (wear parts excluded) In the box: 3 HP bucker heads, bucker stand with industrial casters and variable speed control.
$27,495.00 $9,995.00
-
CenturionPro CenturionPro HP1 Single HP Bucker with Stand, Wet & Dry, up to 175 lb/hr Wet
The CenturionPro HP1 is a single-head commercial bucker on its own stand, pulling stems through two neoprene rollers to pop the flowers off for continuous feeding. Five feed holes from 3/16" to 3/4" handle everything from small branches to thick stems, and it is rated for up to 175 lb/hr wet or 35 lb/hr dry. Capacity: up to 175 lb/hr wet or 35 lb/hr dry Feed entry sizes: 3/16", 1/4", 3/8", 1/2" and 3/4" Pull speed: 10 to 30 in/s; pull strength over 400 lb; continuous duty Drive motor: 0.75 HP, IP54, 1,690 RPM; variable speed, motor pulse and reverse Power: 120 V, 60 Hz, single phase, 5 A; 15 A circuit, not GFCI compatible Build: 304 stainless steel and aluminum; neoprene rubber rollers Dimensions with stand: 37" L x 32.5" W x 59" H; weight 198 lb Optional bucker conveyor (sold separately) Warranty: 10 years on defective parts (wear parts excluded) In the box: HP1 bucker, bucker stand and variable speed control.
$13,995.00 $4,995.00
-
CenturionPro CenturionPro HPM HP Mini Bucker, Wet & Dry, up to 125 lb/hr Wet
The CenturionPro HP Mini is a gear-driven tabletop bucker for wet or dry plant material, with variable speed and reverse so you can back out a stuck stem. It takes stems up to 1/2" through three feed holes and is rated for up to 125 lb/hr wet or 25 lb/hr dry. Capacity: up to 125 lb/hr wet or 25 lb/hr dry Feed entry sizes: 1/4", 3/8" and 1/2" (max stem 1/2") Drive motor: 0.75 HP, IP54, 1,690 RPM, gear-driven Variable speed control with reverse Power: 120 V, 60 Hz, single phase; under 6 A running; 15 A circuit, not GFCI compatible Dimensions: 22" L x 16" W x 20" H; weight 97 lb Breaks down for cleaning in about 10 to 15 minutes Stand sold separately Warranty: 5 years on defective parts (wear parts excluded) In the box: HP Mini bucker and variable speed control.
$9,495.00 $2,495.00
-
CenturionPro CenturionPro HPTT HP TableTop Bucker, Wet & Dry, up to 75 lb/hr Wet
The CenturionPro HPTT is a compact tabletop bucker that pulls stems between two neoprene rollers to strip the flowers off, wet or dry. It takes stems up to 3/8" and is rated for up to 75 lb/hr wet or 15 lb/hr dry, with variable speed control to match the plant material. Capacity: up to 75 lb/hr wet or 15 lb/hr dry Feed entry sizes: 1/4" and 3/8" Pull speed: 10 to 30 in/s; pull strength over 300 lb; continuous duty Drive motor: 0.33 HP, IP54, 1,690 RPM, with variable speed control Power: 120 V, 60 Hz, single phase; under 3 A running; 15 A circuit, not GFCI compatible Build: 304 stainless steel and aluminum; neoprene rubber rollers Dimensions: 18" L x 15" W x 17" H; weight 50 lb Breaks down for cleaning in about 10 to 15 minutes Stand sold separately (CenturionPro HPTT Bucker Stand) Warranty: 2 years on defective parts (wear parts excluded) In the box: HPTT bucker and variable speed control.
$5,495.00 $1,495.00
-
CenturionPro CenturionPro Size Sorter, 4 Size Grades, up to 125 lb/hr
The CenturionPro Size Sorter grades dried flowers into four sizes in one pass, using a gentle soft-tumble action that keeps flower structure intact. With variable speed control included, it is rated for up to 125 lb/hr. Capacity: up to 125 lb/hr of dried flowers Four grades: Bigs (over 3/4"), Mids (over 1/2"), Smalls (over 1/4") and Fines (under 1/4") Soft tumble action with variable speed control included Sorter tumbler: 20" diameter x 66" long Motor: 1/4 HP; draw 3 A at 110 V Low operating noise Dimensions: 88" L x 36" W x 53" H; weight 265 lb Catch bins not included Warranty: 3 years In the box: Size Sorter unit, sorter tumbler, hopper and 2 chutes.
$16,995.00 $10,995.00
-
CenturionPro CenturionPro TableTop Trimmer and HPTT Bucker Bundle with Bucker Stand
This bundle pairs the CenturionPro TableTop hybrid trimmer with the HPTT TableTop Bucker and its stand, so one compact setup can strip flowers off the stems and then trim them. Both machines handle wet or dry plant material. TableTop trimmer: up to 15 lb/hr wet or 3 lb/hr dry; one 5.5" x 24" hybrid stainless steel tumbler; 1 HP blower TableTop trimmer: 25" L x 10" W x 21" H, 55 lb; 10-year warranty (2 years on variable speed control units) HPTT bucker: up to 75 lb/hr wet or 15 lb/hr dry; stems up to 3/8" HPTT bucker: 0.33 HP motor with variable speed control; under 3 A at 120 V HPTT bucker: 304 stainless steel and aluminum, neoprene rollers; 18" L x 15" W x 17" H, 50 lb; 2-year warranty HPTT Bucker Stand included In the box: TableTop trimmer, 1 HP blower, hose, mesh high-capacity hopper, stainless steel tumbler, Kief Collection System, HPTT bucker with variable speed control and HPTT bucker stand.
$3,490.00
-
CenturionPro CenturionPro DBT Model 5 Dry Batch Trimmer, 2 Tumblers, up to 216 lb/hr Dry
The CenturionPro DBT Model 5 puts two 66" trimming sections on one adjustable stand for high-volume dry trimming, with no blower, suction or lubricants. Variable speed and a set-and-forget timer let your crew dial in each batch, and it is rated for up to 216 lb/hr dry. Capacity: up to 216 lb/hr dry (varies with flower density and moisture) Soft Tumble Technology: no blower, suction or lubricants Two trimming sections with two tumblers, each 20" diameter x 66" long Variable speed control and set-and-forget timer Adjustable stand Motor: 1/4 HP; draw 3 A at 110 V Dimensions: 67" L x 68" W x 53" H; weight 460 lb Warranty: 3 years on manufacturing defects In the box: 2 DBT trimming sections, 2 tumblers, plastic blade sheets, 4 trim trays, variable speed control and adjustable stand.
$39,395.00 $20,995.00
-
CenturionPro CenturionPro DBT Model 4 Dry Batch Trimmer, up to 108 lb/hr Dry
The CenturionPro DBT Model 4 is a large-format dry batch trimmer with a 66" tumbler, gently trimming dried flowers over a blade sheet with no blower, suction or lubricants. Variable speed, a timer dial and an adjustable stand make it a set-and-forget machine rated for up to 108 lb/hr dry. Capacity: up to 108 lb/hr dry (varies with flower density and moisture) Soft Tumble Technology: no blower, suction or lubricants Variable speed control and timer dial Adjustable stand One tumbler, 20" diameter x 66" long, with plastic blade sheet Motor: 1/4 HP; draw 3 A at 110 V Dimensions: 67" L x 36" W x 53" H; weight 240 lb Converts to a 4-grade size sorter with the DBT4 Sorter Conversion Kit (sold separately) Warranty: 3 years on manufacturing defects In the box: DBT4 frame, tumbler, plastic blade sheet, trim trays, variable speed control, timer dial and adjustable stand.
$21,995.00 $10,995.00
-
CenturionPro CenturionPro DBT Model 3 Dry Batch Trimmer, up to 60 lb/hr Dry
The CenturionPro DBT Model 3 is a heavy-duty dry batch trimmer on an adjustable-pitch stand, gently tumbling dried flowers over a blade sheet with no blower, suction or lubricants. Variable speed and a set-and-forget timer let you tune each batch, and it is rated for up to 60 lb/hr dry. Capacity: up to 60 lb/hr dry (varies with flower density and moisture) Soft Tumble Technology: no blower, suction or lubricants Variable speed control and timer dial to limit over-trimming Adjustable-pitch stand One tumbler, 18" diameter x 33" long, with plastic blade sheet Motor: 1/8 HP; draw 1.2 A at 110 V Dimensions: 38" L x 31" W x 53" H; weight 150 lb Optional DBT3 Accessory Kief Tumbler in 95 to 180 micron (sold separately) Warranty: 3 years on manufacturing defects In the box: DBT3 machine, tumbler, plastic blade sheet, trim tray, variable speed control and adjustable stand.
$9,895.00 $6,495.00
-
CenturionPro CenturionPro DBT Model 2 Dry Batch Trimmer, up to 25 lb/hr Dry
The CenturionPro DBT Model 2 is a dry batch trimmer for small to medium harvests, gently tumbling dried flowers over a blade sheet with no blower, suction or lubricants. Variable speed control lets you match the tumble to flower size, shape and density, and it is rated for up to 25 lb/hr dry. Capacity: up to 25 lb/hr dry (varies with flower density and moisture) Soft Tumble Technology: no blower, suction or lubricants Variable speed control included One tumbler, 13" diameter x 23" long, with plastic blade sheet Motor: 1/8 HP; draw 1.2 A at 110 V Comes apart without tools for cleaning Dimensions: 31" L x 19" W x 29" H; weight 65 lb Optional DBT2 Accessory Kief Tumbler in 95 to 180 micron (sold separately) Warranty: 3 years on manufacturing defects In the box: DBT2 frame, tumbler, plastic blade sheet, trim tray and variable speed control.
$4,695.00 $2,595.00
-
CenturionPro CenturionPro DBT Model 1 Dry Batch Trimmer, up to 10 lb/hr Dry
The CenturionPro DBT Model 1 is a portable dry batch trimmer that gently tumbles dried flowers over a blade sheet, with no blower, suction or lubricants. It weighs 35 lb with two carry handles and is rated for up to 10 lb/hr dry. Capacity: up to 10 lb/hr dry (varies with flower density and moisture) Soft Tumble Technology: no blower, suction or lubricants One tumbler, 9" diameter x 18" long, with plastic blade sheet Motor: 1/19 HP; draw 0.68 A at 110 V Aluminum frame with two handles Dimensions: 24" L x 13" W x 21" H; weight 35 lb Tumbler comes out in about 2 minutes for cleaning Optional DBT1 Accessory Kief Tumbler in 95 to 180 micron (sold separately) Warranty: 3 years on manufacturing defects In the box: DBT1 frame, tumbler, plastic blade sheet and trim tray.
$2,995.00 $1,895.00
-
CenturionPro CenturionPro DBT Model 0 Dry Batch Trimmer, up to 7 lb/hr Dry
The CenturionPro DBT Model 0 is a compact dry batch trimmer that gently tumbles dried flowers over a blade sheet, with no blower, suction or lubricants. At 28 lb with a quiet 1/19 HP motor, it suits small harvests and is rated for up to 7 lb/hr dry. Capacity: up to 7 lb/hr dry (varies with flower density and moisture) Soft Tumble Technology: no blower, suction or lubricants One tumbler, 9" diameter x 12" long, with plastic blade sheet Motor: 1/19 HP; draw 0.68 A at 110 V Aluminum frame Dimensions: 16.5" L x 13" W x 15.5" H; weight 28 lb Tumbler comes out in about 2 minutes for cleaning Optional DBT0 Accessory Kief Tumbler in 95 to 180 micron (sold separately) Warranty: 2 years on manufacturing defects In the box: DBT0 frame, tumbler, plastic blade sheet and trim tray.
$2,095.00 $1,795.00
-
CenturionPro CenturionPro 3.0+ Hybrid Wet & Dry Trimmer, 3 Tumblers, up to 125 lb/hr Wet
The CenturionPro 3.0+ is a three-tumbler hybrid trimmer for large commercial harvests, with variable speed control standard so you can dial the tumble in for wet or dry flowers. It is rated for up to 125 lb/hr wet or 25 lb/hr dry. Capacity: up to 125 lb/hr wet or 25 lb/hr dry Cuts per minute: 20,000 to 200,000 Three stainless steel tumblers, each 6.5" diameter x 38" long Variable speed control standard Leaf collector: 8 HP 3-phase blower, 220 V 60 Hz (single-phase 6 HP blower available on request) Trimmer draw: 13 A at 110 V Body: aluminum with black anodized parts; powder-coated cutting reel; slotted lid; food-grade mesh hopper Dimensions: 38" L x 38" W x 31.5" H; weight 331 lb Upgrades available: Quantanium tumblers and a QC/exit conveyor (sold separately) Warranty: 10 years on the machine In the box: 3.0+ trimmer with variable speed control, 8 HP 3-phase blower, mesh high-capacity hopper, stainless steel tumblers and Kief Collection System.
$21,995.00 $10,995.00
-
CenturionPro CenturionPro Gladiator Hybrid Wet & Dry Trimmer, 2 Tumblers, up to 75 lb/hr Wet
The CenturionPro Gladiator is a dual-tumbler hybrid trimmer for commercial-scale harvests, trimming wet or dry flowers on the same machine. It is rated for up to 75 lb/hr wet or 15 lb/hr dry, which CenturionPro puts at the work of up to 60 hand trimmers. Capacity: up to 75 lb/hr wet or 15 lb/hr dry Cuts per minute: 11,000 to 110,000 Two stainless steel tumblers, each 6.5" diameter x 30" long Nitrided cutting reel with food-grade reel bearings Leaf collector: 4 HP blower, 22 A Trimmer draw: 7 A at 110 V Body: aluminum with black anodized parts; plastic lid Dimensions: 30" L x 25" W x 28" H; weight 196 lb Upgrades available: Quantanium tumblers, variable speed control and a QC/exit conveyor (sold separately) Warranty: 10 years on the machine, 2 years on variable speed control units In the box: Gladiator trimmer, 4 HP blower, mesh high-capacity hopper, 2 stainless steel tumblers and Kief Collection System.
$14,295.00 $6,995.00
You have seen 24 out of 27 products