AutoPot
-
AutoPot AutoPot easy2grow Tubing, 4.9 ft or 100 ft
Tubing made for the easy2grow system's channel trays, in AutoPot's matte black composite. It's not for grommeted trays. 6.35 mm ID x 8.25 mm OD For easy2grow channel trays, not grommeted trays Matte black custom-blend composite 4.9 ft length or 100 ft roll
$5.19 - $94.99
-
AutoPot AutoPot Essential Fittings Kit, Small (23 Pieces)
A 23-piece box of the 3/8" spares AutoPot growers reach for most, from float silicones to Pro Series fittings, sorted in a small organizer. AutoPot sizes it for systems of up to 4 pots. Best suited to systems of up to 4 pots 3/8" parts for AQUAvalve5 systems Plastic organizer with removable dividers, up to 15 compartments; 5" x 7.5" x 1.4" In the box: 4 AQUAvalve5 top float silicones, 4 AQUAvalve5 bottom float silicones, 2 Pro Series 3/8" tee connectors, 2 Pro Series 3/8" cross connectors, 1 Pro 3/8" in-line tap, 1 x 3/8" AQUAvalve collar, 1 x 3/8" golf filter case, 2 replacement golf filter materials, 1 AQUAvalve float cap (black), 1 x 3/8" end stop, 2 x 3/8" elbow connectors and 2 x 3/8" top hat grommets, in a plastic organizer.
$44.99
-
AutoPot AutoPot Pro Blue 3/8" OD Pipe, 5 ft or 100 ft
AutoPot's Pro Blue 3/8" pipe is co-extruded and printed with meter markings so it's easy to measure off runs. It's made to fit AutoPot's 3/8" fittings and the AQUAvalve5 and keep water moving at full flow. 9 mm (3/8") OD x 7 mm ID Co-extruded construction with meter markings Blue 5 ft length or 100 ft roll; multiple 5 ft lengths come as one uncut piece For the AQUAvalve5 and 3/8" AutoPot fittings
$4.99 - $94.99
-
AutoPot AutoPot 1/2" Hose Connector
The standard 1/2" hose connector used across AutoPot's FlexiTank plumbing. It fits the Click-Fit outlet on the FlexiTank Tap and is the connector the 1/2" ProFilter and AutoPot's FlexiTank in-line filters call for at their 1/2" ends. Fits the Click-Fit outlet on the AutoPot FlexiTank Tap Used at the 1/2" inlet and outlet of the 1/2" ProFilter, and with AutoPot's FlexiTank in-line filters Sold individually
$6.69
-
AutoPot AutoPot Black Pipe, 5 ft Length, 3/8" OD or 1/4" OD
AutoPot's own matte black tubing by the 5 ft length. Use 3/8" OD with the AQUAvalve5 and the 3/8" fittings every current AutoPot system comes with, or 1/4" OD for older systems with pre-October 2020 AQUAvalves (black with a red collar, or blue with a yellow collar). 3/8" OD: 6.35 mm ID x 9.1 mm OD, for AQUAvalve5 (gray/black) and 3/8" fittings 1/4" OD: 4 mm ID x 6 mm OD, for older AQUAvalve4 (black/red) and 1/4" fittings Custom-blend matte black composite tubing Sold per 5 ft length; order more than one and it comes as one uncut piece
$4.49 - $4.89
-
AutoPot AutoPot In-Line Tap Shut-Off Valve, Pro 3/8" or 1/2"
An in-line tap lets you shut the water off for maintenance or flush sediment and lime scale out of your lines. Fit it just after the reservoir connection to shut off the supply, or on the end of a run and open it for a couple of minutes every couple of weeks to flush the line. 3/8" Pro: 90-degree turn with an easy-twist handle; handle in line with the tap is on, across it is off 3/8" Pro: arrow on the side shows the direction to install it 1/2": goes on the end of a 1/2" line for flushing Sold individually
$5.95 - $6.19
-
AutoPot AutoPot Straight Connector for 3/8", 1/4" and 1/2" Pipe
Straight connectors join two lengths of pipe to extend a run with an almost seamless joint. Choose 3/8" for AQUAvalve5 systems, 1/4" for older AQUAvalve4 systems, or 1/2" for 1/2" main lines. 3/8": AQUAvalve5 (gray/black) systems and 3/8" fittings 1/4": older AQUAvalve4 (black/red) systems and 1/4" fittings 1/2": joins two pieces of 1/2" pipe Sold individually
$0.99 - $2.49
-
AutoPot AutoPot End Stop for 3/8" and 1/2" Pipe
End stops cap a spare end on a pipe run. If you want to be able to flush that line out from time to time, put an in-line tap on the end instead. 3/8": for AQUAvalve5 (gray/black) systems and 3/8" fittings 1/2": caps the end of a 1/2" supply line Sold individually
$0.99 - $1.94
-
AutoPot AutoPot Top Hat and Blanking Grommets
Top hat grommets make a watertight seal where pipe passes through a tank or tray wall. The 3/8" fits grommeted trays, the 12.4 gal hard tank and the Tray2Grow; the 1/2" and 1" sizes take larger pipe out of a tank; and the 1/4" blanking grommet plugs the overflow hole in an XXL tray. 3/8" top hat: for AQUAvalve5 systems; grommeted trays, the bottom of the 12.4 gal hard tank and the Tray2Grow 1/2" top hat: 5/8" (15.88 mm) ID, 3/4" (19.05 mm) OD 1" top hat: 3/4" (19.05 mm) ID, 7/8" (22.23 mm) OD; push-fit for AutoPot's 1/2" ID (3/4" OD) pipe through a 23 mm hole drilled at the bottom of a large tank, handy when you can't reach inside to fit a tap 1/4" blanking grommet: sits in the machined hole in the XXL tray wall; pull it to run an XXL outdoors with overflow protection Sold individually
$2.39 - $2.49
-
AutoPot AutoPot 1/2" Elbow Connector
A 1/2" elbow for turning a corner in a 1/2" AutoPot main line. Size: 1/2" For AutoPot 1/2" pipe Sold individually
$1.94
-
AutoPot AutoPot Tee Connector for 3/8", 1/4" and 1/2" Pipe
AutoPot tee connectors join three runs of pipe and pair with the cross connectors to build whatever layout your space needs. Use 3/8" for AQUAvalve5 (gray/black) systems and 1/4" for older AQUAvalve4 (black/red) systems. The 1/2"-to-3/8" and 1/2"-to-1/4" reducing tees go in a 1/2" main line where an AQUAvalve branches off, and the Pro Series versions are molded from tougher black nylon. 3/8" and 1/4": join three pieces of pipe; single, 5-pack or 10-pack 1/2": joins three pieces of 1/2" pipe 1/2" to 3/8" and 1/2" to 1/4": one reduced outlet off a 1/2" main line (the reducing cross has two), with a watertight connection Pro Series (3/8" and 1/2" to 3/8"): automotive-grade black nylon, single-barb design with an anti-rotation clamp, sharp barbs for a leak-proof seal, UV stabilized, heat, chemical and wear resistant Low-flow fittings for low-pressure, gravity-fed systems Soften the pipe before connecting or disconnecting
$1.19 - $9.52
-
AutoPot AutoPot Cross Connector for 3/8", 1/4" and 1/2" Pipe
AutoPot cross connectors join four runs of pipe so you can lay a system out to suit your space. Use 3/8" for AQUAvalve5 (gray/black) systems and 1/4" for older AQUAvalve4 (black/red) systems. The 1/2"-to-3/8" and 1/2"-to-1/4" reducing crosses go in a 1/2" main line where AQUAvalves branch off, and the Pro Series versions are molded from tougher black nylon. 3/8" and 1/4": join four pieces of pipe; single, 5-pack or 10-pack 1/2": joins four pieces of 1/2" pipe 1/2" to 3/8" and 1/2" to 1/4": reduce a 1/2" main line down to valve pipe with a watertight connection Pro Series (3/8" and 1/2" to 3/8"): automotive-grade black nylon, single-barb design with an anti-rotation clamp, sharp barbs for a leak-proof seal, UV stabilized, heat, chemical and wear resistant Low-flow fittings for low-pressure, gravity-fed systems Soften the pipe before connecting or disconnecting
$1.85 - $14.80
-
AutoPot AutoPot AQUAvalve5 Upgrade Kit for 1Pot, 1Pot XL and GeoPot Systems
Converts an older AutoPot 1Pot, 1Pot XL or GeoPot XL system that runs 1/4" (pre-October 2020) valves over to the AQUAvalve5 and its larger-bore 3/8" pipe and fittings. It's the upgrade parts only, not a full system: fit the new grommeted trays and lids, put your pots back in and connect the system as before. Choose your system size (1 to 100 pots) and tray type: 1Pot for 2.2/3.9 gal pots, or 1Pot XL / GeoPot Every kit: one AQUAvalve5 and one grommeted tray and lid per pot, plus 3/8" pipe 1, 2 and 4 pot kits (both tray types) and the standard 6 pot kit also include 3/8" in-line tap(s), a golf filter with filter material and a 3/8" top hat grommet for a hard-tank setup, plus 3/8" cross and tee connectors where the layout needs them The 6 Pot XL kit and all 8 pot and larger kits use 1/2"-3/8" reducing connectors to branch off a 1/2" main line from a FlexiTank (1/2" pipe and tank filter not included) On a 12.4 gal plastic tank, enlarge the grommet hole to 12.5 mm with a step drill, using the 3/8" top hat grommet as the size guide Existing FlexiTank filters and adapters still work; you only need a 1/2"-3/8" filter and adapter to run 3/8" pipe straight from a FlexiTank Pots and reservoir not included
$56.59 - $5,034.09
-
AutoPot AutoPot AQUAvalve5 Upgrade Kit for easy2grow Systems
Converts an older easy2grow system (2Pot trays with 2.2 or 3.9 gal pots) over to the AQUAvalve5 and its larger-bore 3/8" pipe and fittings. It's the upgrade parts only, not a complete system: your trays, pots and lids stay in service. Sizes from a single easy2grow tray up to an easy2grow 100 One AQUAvalve5 per 2Pot tray, plus 3/8" pipe easy2grow, easy2grow 4 and easy2grow 6 kits also include a 3/8" top hat grommet, a golf filter and 3/8" in-line taps (one on the easy2grow, two on the 4 and 6), plus tee connectors on the 4 and 6 easy2grow 12 and larger kits use 1/2"-3/8" reducing cross connectors to branch off a 1/2" main line from a FlexiTank On a 12.4 gal plastic tank, enlarge the grommet hole to 12.5 mm with a step drill Existing easy2grow trays, pots and lids fit the AQUAvalve5 and 3/8" parts
$37.99 - $1,241.79
-
AutoPot AutoPot Module Accessory Pack, AQUAvalve with Pipe and Fittings
The working parts for one AutoPot module: the AQUAvalve, a length of pipe, root control and the fittings to tap into your main line. It drops into your existing module tray, so it's the way to refit a module; trays, lids and pots are sold separately (the XXL packs include the fabric pot). Pick the pack for your module, then AQUAvalve5 (3/8") or the pre-October 2020 AQUAvalve (1/4") to match your fittings. 1Pot Module: AQUAvalve, 3.3 ft of pipe, root control disc, tee and 1/2" reducing tee 1Pot XL Module: AQUAvalve, 3.3 ft of pipe, XL root control disc, tee and 1/2" reducing tee GeoPot Module (pot not included): AQUAvalve, 3.3 ft of pipe, PotSock Round, tee and 1/2" reducing tee easy2grow Kit: AQUAvalve, 2 PotSock Square, 2 root control discs, 4.9 ft of pipe, in-line tap, golf filter and grommet easy2grow Extension: AQUAvalve, 3.3 ft of pipe, 2 root control discs, 2 PotSock Square, tee and 1/2" reducing tee XXL Module 9 or 13 gal (AQUAvalve5 only): AQUAvalve5, 3.3 ft of 3/8" pipe, matching fabric FlexiPot and PotSock, 3/8" top hat grommet, 1/4" blanking grommet, 3/8" tee, 1/2"-3/8" tee and 1/2"-3/8" cross; XXL tray and lid sold separately, and the 9 gal pack also needs the XXL Adaptive Collar AQUAvalve5 packs use 3/8" pipe with 3/8" and 1/2"-3/8" fittings; pre-October 2020 packs use 1/4" pipe with 1/4" and 1/2"-1/4" fittings Every pack includes full instructions
$31.99 - $65.39
-
AutoPot AutoPot AQUAvalve PotSock Kit with Metal Plate
Root control for an AQUAvalve sitting in an open tray: the AQUAvalve PotSock keeps roots clear of the valve. It's the answer for pot sizes the PotSock Round and Square don't cover, and AutoPot recommends using it with the weighted AQUAvalve Cover to hold it in place. Keeps root systems clear of an AQUAvalve in an open tray For pot sizes not covered by the PotSock Round or PotSock Square Use with the AQUAvalve Cover (sold separately) to keep it in position Pairs with large pots such as the FlexiPot 37 gal in an easy2GO setup In the box: 1 AQUAvalve PotSock and 1 metal plate.
$12.89
-
AutoPot AutoPot AQUAvalve5 Replacement Float Parts
Replacement floats and caps for the AutoPot AQUAvalve5. Each valve has an upper float carrying two removable float caps and a bottom float with its own silicone, so you can swap out a worn or lost part instead of replacing the whole valve. Upper Float: 1 AQUAvalve5 upper float plus 2 float caps Bottom Float: 1 AQUAvalve5 bottom float plus 1 bottom float silicone Float Cap: single replacement cap; fits all AQUAvalve models (two per upper float)
$1.99 - $8.99
-
AutoPot AutoPot Spirit Level for Tray2Grow and AQUAvalve Cover
Replacement circular spirit level for checking that a tray sits level, so water spreads evenly. The Tray2Grow uses three and the AQUAvalve Cover takes one. Fits the Tray2Grow rim (3 per tray) and the AQUAvalve Cover (1 per cover) Helps you level the tray so water spreads evenly Sold individually
$1.99
-
AutoPot AutoPot AQUAvalve Replacement Silicone
Replacement silicones for AQUAvalve floats. They press into the recesses in the top and bottom floats; the AQUAvalve5 uses a different silicone on each float (the bottom one is the larger piece), and the AQUAvalve4 silicone fits the AQUAvalve4 and earlier valves. AQUAvalve5 Top Float: the smaller silicone, for the top float AQUAvalve5 Bottom Float: the larger silicone, for the bottom float AQUAvalve4 and Earlier: fits the AQUAvalve4 and older models Bright colors so they're easy to spot; actual color may vary from the photos Sold individually
$0.62
-
AutoPot AutoPot AQUAvalve Cover
A heavy composite cover that sits over an AQUAvalve in any flat tray, and the key part of AutoPot's easy2GO kit. With a valve, a cover and a tank you can water pots in a tray of any shape or size, and it's heavy enough that it doesn't need weighing down. Fits over an AQUAvalve set in a flat tray (AQUAvalve not included) Heavy composite material stays put without a weight Connect the AQUAvalve to a tank with 3/8" pipe and a filter Keep the tray as level as possible; an optional spirit level fits on the cover Use pots of at least 5 liters so small plants aren't sitting in deep water For carnivorous plants, use rainwater only
$11.79
-
AutoPot AutoPot 1/2" to 3/8" In-Line Filter for FlexiTank
An in-line filter that connects to 1/2" pipe and reduces to 3/8" to feed an AutoPot system of 1 to 6 modules, with an internal filter you can get at for cleaning. Pick the 1/2"-1/4" size for older AQUAvalves (black with a red collar, or blue with a yellow collar). Connects to 1/2" pipe and reduces to 3/8" (or 1/4" on the older-valve version) For AutoPot systems of 1 to 6 modules Internal filter comes out for cleaning For FlexiTank reservoirs and AQUAvalve5; works on a 12.4 gal hard tank only with a FlexiTank Tap installed Bought on its own, it also needs a hose connector and a length of 1/2" tubing
$10.39
-
AutoPot AutoPot 1/2" Click Fit FlexiTank Adapter and Filter
Pushes straight onto the tap that comes with every FlexiTank and FlexiTank Pro, with the filter built into the length of the fitting. It catches sediment before water reaches the pipe feeding your AQUAvalve trays, and the outlet takes 1/2" pipe for bigger layouts. Pushes onto the FlexiTank and FlexiTank Pro tap Filter sits inside the fitting body 1/2" outlet for running 1/2" pipe For FlexiTank reservoirs feeding AQUAvalve5 systems Works on a 12.4 gal hard tank only with a FlexiTank Tap installed If the FlexiTank sits on a stand, mount the filter away from the tap to keep strain off the tank
$24.99
-
AutoPot AutoPot 1/2" ProFilter for FlexiTank
AutoPot's heavy-duty in-line filter for FlexiTank setups, with a bigger drum-shaped filter area than the standard filter and a body that's easy to take apart and clean. It sits between the FlexiTank and the line feeding your AQUAvalve5 trays and catches sediment before it reaches the valves. Larger, drum-shaped filter area; filter inserts available in different micron ratings 1/2" inlet and outlet, each taking a standard 1/2" hose connector (not included) For FlexiTank and FlexiTank Pro reservoirs feeding AQUAvalve5 systems Works on a 12.4 gal hard tank only with a FlexiTank Tap installed Hose connectors and 1/2" tubing sold separately
$26.89
-
AutoPot AutoPot Tap for All Water Barrels
Turns any plastic container into an AutoPot reservoir. Drill a hole near the bottom, fit the tap from the inside, and add a 1/2" or 1/2"-1/4" Click Fit adapter and filter to feed your system. Fits any plastic container as an alternative to an AutoPot hard tank or FlexiTank Mounts through a hole drilled near the bottom of the container You need to reach inside the tank to secure the tap No inside access? Use a 1/2" or 1/4" top hat grommet instead Takes the 1/2" or 1/2"-1/4" Click Fit adapter and filter (sold separately)
$15.99
You have seen 48 out of 244 products