Using an analog timer to automate your lighting adds convenience and encourages productive growth with consistent hours of light. Timers are also essential for many hydroponic system applications.Features15 minute on/off24 hour cycleControls two outlets simultaneously15A/1725WUL-listed
The Autopilot Cumulus S50 Digital CO2 Controller measures and controls grow room carbon dioxide levels with great precision. It can operate in Fuzzy Logic mode, ppm Up or ppm Down mode. The S50 digital display shows exact ppm readings down to 1 ppm resolution. It boasts a fully customizable CO2 set point and deadband, min/max recall, LED mode and error indicators, optional calibration and a remote 15' low drift CO2 sensor with photocell.
The ppm Up mode is designed for use with CO2 generator systems (LP or NG).
Fuzzy Logic is designed specifically for controlling standard compressed CO2 tank & regulator systems to improve efficiency and minimize CO2 waste. When in Fuzzy Logic mode, the built-in microprocessor continuously applies calculations to the injection schedule, improving CO2 injection rates over time. This highly efficient method of injection helps maintain more consistent CO2 levels while saving money year round on expensive CO2 tanks.
Controlling CO2 has never been easier or more affordable. Autopilot's CUMULUS S50 eliminates guesswork while maintaining grow room carbon dioxide levels with great accuracy and efficiency.
Mounts to both walls and grow tents. Two mounting kits are included with each controller.
Features
Accurate dual-beam CO2 sensor
Adjustable CO2 deadband
15' remote combination probe (CO2 & light)
Instantaneous readings down to 1 ppm
Records high and low CO2 levels
Fuzzy Logic mode adjustable (on/off)
LED mode and error indicators
ETL-listed
14.5 max operating amperage, 120V
NOTE: Can be linked to the APE4100 and other controllers to disable the CO2 output when exhaust fans are in operation (optional 24V adapter included)
The Autopilot Cooling Thermostat is a compact and easy-to-use controller for air conditioners and exhaust fans. Simply plug it into a power receptacle and then plug your cooling device into its outlet, then choose your preferred room temperature setpoint with the rotary knob. When its built-in sensor senses that the room temperature has exceeded the setpoint by at least 1F, it will automatically activate your cooling device by powering the outlet. Digital screen displays current room temperature. Its green LED light illuminates when the outlet is activated to on. When the temperature in the room has dropped at least 1F, the Autopilot Cooling Thermostat will cut power to the cooling device. It has a built-in 1-degree deadband and is ETL-listed. Max power handling 15A.Features:Easy to use analog controlMaintains desired room temperatureControls air conditioner or exhaust fanTemperature control range: 40 - 95FDigital display shows current room temperature
Expand wall outlets and control your equipment with this 8-outlet power strip with surge protection and built-in timer. Offers 4 timed outlets and 4 always-on outlets, with indicator lights for each type. Timer has 15-minute increment pins. Timer override switch provided. Lighted power switch also acts as circuit breaker/reset.Features4 timed, 4 constant outletsPower indicatorSurge protector6' power cordCircuit breaker switch for safety
The APCTART2 is a cycle timer controller with day and night detection. It works to control any application requiring a device to be turned on and off at precise intervals. This timer has a wide range of uses including controlling hydroponic pumps, CO2 injection, turning on and off exhaust fans, misters and more.The cycle timer is adjustable for operation during the day, during the night, or all of the time (24 hours). We added a Memory-lock feature which will lock the set points into memory for consistent performance, even if the knobs are accidently bumped.Controls 120V pumps, fans, and more on a periodic repeat cycle Adjustable "ON" duration spans from 1 second to 60 minutes Adjustable "OFF" duration spans from 1 minute to 14 hours Built-in photocellFunctions during the day, during the night, or 24 hours 120v, 15 amps max
Autopilot APC8200 CO2 Monitor & Controller with Memory offers a simple and affordable way to control, monitor and record CO2 levels over an adjustable period of time. Trace your room's CO2 levels over minutes, hours, or up to 7 days with this easy-to-use controller. The APC8200 also boasts a fully customizable CO2 setpoint and deadband. Adjust and review your CO2 levels when you want to and how you want to. The APC8200's memory feature gives growers a real edge in fine-tuning the grow room environment. Optimize your CO2 levels with this precision controller from Autopilot!
FEATURES:
Fully customizable ppm deadband and CO2 setpoint allow flexibility in programming
Trend Chart records CO2 levels per minute, hour, day and week for accurate analysis of CO2 distribution
Adjustable Trend Chart Zoom levels let you trace your ppm levels
Remote CO2 sensor probe w/photocell & 15' data cable lets you take readings from proper grow room locations
2-Channel Low Drift NDIR Sensor precisely reads CO2 ppm levels
Green LED identification lights inform you of the unit's status at all times
APC8200 Error Codes:
Fault Icon Description of the fault Suggested Actions
Err4 IR lamp error Please reconnect power adapter, if the Err4 still appears, please contact the service department.
Err5 Internal parameter error Please reconnect power adapter, if the Err5 still appears, please contact the service department.
Err6 Sensor unit Connect Error Please reconnect sensor unit and redo power on, if the Err6 still appears, please contact the service department.
Err7 temperature or humidity error Please turn off power adapter, and put the device in a dry place more than 12 hours.
Err8 Internal calculate error Please reconnect power adapter, if the Err6 still appears, please contact the service department.
Using an analog timer to automate your lighting adds convenience and encourages productive growth with consistent hours of light. Timers are also essential for many hydroponic system applications.Features15 minute on/off15A/1725WGreat for lighting, pumps, etc.Includes convenient clam shell packagingUL-listed
Using a timer to automate your lighting adds convenience and encourages productive growth with consistent hours of light. Timers are also essential for many hydroponic system applications.Features1 second on/offUp to 8 on/off cycles per dayExcellent for hydroponic systems15 ampUL-listedFOR MORE THAN 8 ON/OFF CYCLES PER DAY, USE APCTART
This is a replacement CO2 sensor for the Autopilot APC8200
Remote CO2 sensor probe w/photocell & 15' data cable lets you take readings from proper grow room locations
2-Channel Low Drift NDIR Sensor precisely reads CO2 ppm levels
Control multiple lights from one timer or controller device. Power is wired directly into the four-outlet timer box and all of the outlets are controlled by one detachable 120V trigger cable. Rated for 30 amps at 120/240 volts. The trigger cable can be plugged into a standard 24-hour timer or environmental controller. Three year no hassle warranty.APCL4DX has four 120/240 volt style outlets which allow running your ballasts at 120/240 volts without having to change out your ballast power cords.FEATURES:4000W 4-light controller Premium quality industrial grade relay X-style outlets allow 120V or 240V ballast operation 30A maximum Attached 120V trigger cable Improved terminal blocksSpecs:RATED AMPERAGE: 30 FREQUENCY: 50/60Hz VOLTAGE: 120/240
Autopilot 24 hr Day & Night Cooling/Heating ThermostatThe APCET2 is a temperature controller that can be used as a cooling OR a heating device. It automatically powers the device connected based on the selected day and night set points. The user can choose to have different day and night temperature set points that are automatically detected by the built-in photocell. The knobs make it easy to adjust the settings. We added a Memory-lock feature which will lock the set points into memory for consistent performance, even if the knobs are accidently bumped.
Controls heating or cooling equipment with both day/night set points
Includes 20' remote precision temperature sensor
Temperature control differential +/- 3F
Built-in photocell
120v, 15 amps max
Control up to eight lights from one timer or controller device. 240V power is wired directly into the eight outlet timer box, and all of the outlets are controlled by one detachable 120V trigger cable. Rated for 60 amps at 120/240 with eight 120/240V X-style receptacles. The light controller is backed by a hassle free 3 year warranty. APCL8DX has eight 120/240 volt style outlets which allow running your ballasts at 120/240 volts without having to change out your ballast power cords. FEATURES:8000 Watt, 8 light controller Premium quality industrial grade relay X-style outlets allow 120V or 240V ballast operation 60 Amp maximum (30 amps x 2 relays) Attached 120V trigger cable Upgraded terminal blocksSpecs:RATED AMPERAGE: 60 FREQUENCY: 50/60Hz VOLTAGE: 120/240
