Drip Irrigation
-
Netafim Netafim .5 GPH Single Drip Stake Assembly 30" (SOLD AS SINGLES, NOT BUNDLE)
Netafim Woodpecker Pressure Compensating Junior Dripper Assembly 0.5GPH 30in (25pcs/Bag) Netafim Single dripper stake assemblies will reduce set up time considerably. This 30-inch assembly will install right where you need it. Dripper assembly uses a 0.5GPH pressure compensating emitter with CNL check vale, 30 inches of Super Flex Tubing and an angled barbed stake. Minimum operating pressure is 10PSI. Delivering superior uniformity with slow, low-flow drippers for even and uniform soil wetting without the run-off. The Netafim Dripper Stake Assembly is ideal for soilless substrates and hydroponic applications because each plant pot or rock wool cube receives an equal and precise amount of water nutrients. The slower and lower flow wet the soil media thoroughly without any run-off around the edges of the container. This allows longer runs on smaller polyethylene supply laterals maintaining excellent uniformity while holding down system costs. The PCNL dripper feature ensures that each plant receives the same amount of water at the same time. A built-in check valve assures that all the drippers will turn on – when the system is fully pressurized – and off at the same time. Dripper Stake Assembly with PCNL dripper offers high performance for a very low cost per plant position. Why Dripper Stake Assemblies? Higher Uniformity = Higher Crop Values Most sprinkler systems lack uniform coverage and this creates wet and dry areas. Plant foliage interferes with water reaching the container. The result is a necessity to overwater many plants in order to provide adequate water to the dry areas and to overcome the interference of foliage. Netafim Dripper Stake Assemblies overcome these obstacles by delivering water directly to the plant. Each dripper adjusts itself automatically to the system pressure resulting in a watering uniformity of 94% – even on slopes. Since all water is delivered directly to the container, there is no run-off – no overspray into the aisles saving water, fertilizer, and energy. Product Advantages Provide Uniform Flow Distribution Maintains a Uniform FLow Rate with the widest Compensation Range 7 to 58 psi Patented pressure differential system maintains uniform flow rate at different inlet working pressures (within the recommended range) ensuring exact distribution of water and nutrients Industry’s widest flow path and wider dripper cross section allow large particles through the dripper’s short flow path Continuous self-flushing system, even while irrigating, provides improved resistance to clogging
$1.66
-
Netafim Netafim Woodpecker Pressure Compensating Junior Dripper Assembly (0.5GPH) - 24" (SINGLE)
Netafim Single dripper stake assemblies will reduce set up time considerably. This 24-inch assembly will install right where you need it. Dripper assembly uses a 0.5GPH pressure compensating emitter with CNL check vale, 24 inches of Super Flex Tubing and an angled barbed stake. Minimum operating pressure is 10PSI. Delivering superior uniformity with slow, low-flow drippers for even and uniform soil wetting without the run-off. The Netafim Dripper Stake Assembly is ideal for soilless substrates and hydroponic applications because each plant pot or rock wool cube receives an equal and precise amount of water nutrients. The slower and lower flow wet the soil media thoroughly without any run-off around the edges of the container. This allows longer runs on smaller polyethylene supply laterals maintaining excellent uniformity while holding down system costs. The PCNL dripper feature ensures that each plant receives the same amount of water at the same time. A built-in check valve assures that all the drippers will turn on – when the system is fully pressurized – and off at the same time. Dripper Stake Assembly with PCNL dripper offers high performance for a very low cost per plant position. Why Dripper Stake Assemblies? Higher Uniformity = Higher Crop Values Most sprinkler systems lack uniform coverage and this creates wet and dry areas. Plant foliage interferes with water reaching the container. The result is a necessity to overwater many plants in order to provide adequate water to the dry areas and to overcome the interference of foliage. Netafim Dripper Stake Assemblies overcome these obstacles by delivering water directly to the plant. Each dripper adjusts itself automatically to the system pressure resulting in a watering uniformity of 94% – even on slopes. Since all water is delivered directly to the container, there is no run-off – no overspray into the aisles saving water, fertilizer, and energy. Product Advantages Provide Uniform Flow Distribution Maintains a Uniform FLow Rate with the widest Compensation Range 7 to 58 psi Patented pressure differential system maintains uniform flow rate at different inlet working pressures (within the recommended range) ensuring exact distribution of water and nutrients Industry’s widest flow path and wider dripper cross section allow large particles through the dripper’s short flow path Continuous self-flushing system, even while irrigating, provides improved resistance to clogging Applications Vineyards Orchards Greenhouses and Nurseries Ideal for soilless substrates and hydroponic applications Dripper Stake Components PC Drippers: Pressure Compensating to provide a constant flow from 10 to 45 psi and has a built-in check valve to ensure instantaneous on-off at system shut-down. Angle Barbed Stake: Unique flow channel down the length of the stake directing the water into the container. It also has a pointed end for easy container insertion. Super Flex UV White™ Polyethylene (PE) Tubing: Super Flex UV White™ PE Tubing produces cooler water temperatures and enhances plant growth. Made from the highest quality plastics with excellent Ultra-Violet (UV) resistance, our reflective white tubing is completely opaque to prevent algae growth. This tubing is not coated or layered white, it is solid white for long-term durability. It can withstand heat, direct sun and harsh chemicals.
$1.65
-
Netafim Netafim Woodpecker Pressure Compensating Junior Dripper Assembly (0.5GPH) - 36" (SINGLE)
Netafim Woodpecker Pressure Compensating Junior Dripper Assembly 0.5GPH 36in Netafim Single dripper stake assemblies will reduce set up time considerably. This 36-inch assembly will install right where you need it. Dripper assembly uses a 0.5GPH pressure compensating emitter with CNL check vale, 36 inches of Super Flex Tubing and an angled barbed stake. Minimum operating pressure is 10PSI. Delivering superior uniformity with slow, low-flow drippers for even and uniform soil wetting without the run-off. The Netafim Dripper Stake Assembly is ideal for soilless substrates and hydroponic applications because each plant pot or rock wool cube receives an equal and precise amount of water nutrients. The slower and lower flow wet the soil media thoroughly without any run-off around the edges of the container. This allows longer runs on smaller polyethylene supply laterals maintaining excellent uniformity while holding down system costs. The PCNL dripper feature ensures that each plant receives the same amount of water at the same time. A built-in check valve assures that all the drippers will turn on – when the system is fully pressurized – and off at the same time. Dripper Stake Assembly with PCNL dripper offers high performance for a very low cost per plant position. Why Dripper Stake Assemblies? Higher Uniformity = Higher Crop Values Most sprinkler systems lack uniform coverage and this creates wet and dry areas. Plant foliage interferes with water reaching the container. The result is a necessity to overwater many plants in order to provide adequate water to the dry areas and to overcome the interference of foliage. Netafim Dripper Stake Assemblies overcome these obstacles by delivering water directly to the plant. Each dripper adjusts itself automatically to the system pressure resulting in a watering uniformity of 94% – even on slopes. Since all water is delivered directly to the container, there is no run-off – no overspray into the aisles saving water, fertilizer, and energy. Product Advantages Provide Uniform Flow Distribution Maintains a Uniform FLow Rate with the widest Compensation Range 7 to 58 psi Patented pressure differential system maintains uniform flow rate at different inlet working pressures (within the recommended range) ensuring exact distribution of water and nutrients Industry’s widest flow path and wider dripper cross section allow large particles through the dripper’s short flow path Continuous self-flushing system, even while irrigating, provides improved resistance to clogging Applications Vineyards Orchards Greenhouses and Nurseries Ideal for soilless substrates and hydroponic applications Dripper Stake Components PC Drippers: Pressure Compensating to provide a constant flow from 10 to 45 psi and has a built-in check valve to ensure instantaneous on-off at system shut-down. Angle Barbed Stake: Unique flow channel down the length of the stake directing the water into the container. It also has a pointed end for easy container insertion. Super Flex UV White™ Polyethylene (PE) Tubing: Super Flex UV White™ PE Tubing produces cooler water temperatures and enhances plant growth. Made from the highest quality plastics with excellent Ultra-Violet (UV) resistance, our reflective white tubing is completely opaque to prevent algae growth. This tubing is not coated or layered white, it is solid white for long-term durability. It can withstand heat, direct sun and harsh chemicals.
$1.73
-
Netafim Netafim .5 GPH Single Drip Stake Assembly 48" (PACK OF 25)
Netafim single dripper stake assemblies come fully assembled and streamline the installation process. Choose between 18, 24, 30, 36 or 48 inch assemblies that can install right where you need it. Dripper assembly uses a 0.5 gph pressure compensating emitter with CNL check value, 18, 24, 30, 36 or 48 inches of Super Flex Tubing and an angled barbed stake. Minimum operating pressure is 10 psi. Pair with the Netafim Punch Tool, Netafim UV Polyethylene Tubing and Netafim Techlock fittings and fine tune your drip irrigation system.
$81.02
-
Netafim Netafim Woodpecker Pressure Compensating Junior Dripper Assembly (0.5GPH) - 24" (PACK OF 25)
Netafim Woodpecker Pressure Compensating Junior Dripper Assembly 0.5GPH 24in (25pcs/Bag) Netafim Single dripper stake assemblies will reduce set up time considerably. This 24-inch assembly will install right where you need it. Dripper assembly uses a 0.5GPH pressure compensating emitter with CNL check vale, 24 inches of Super Flex Tubing and an angled barbed stake. Minimum operating pressure is 10PSI. Delivering superior uniformity with slow, low-flow drippers for even and uniform soil wetting without the run-off. The Netafim Dripper Stake Assembly is ideal for soilless substrates and hydroponic applications because each plant pot or rock wool cube receives an equal and precise amount of water nutrients. The slower and lower flow wet the soil media thoroughly without any run-off around the edges of the container. This allows longer runs on smaller polyethylene supply laterals maintaining excellent uniformity while holding down system costs. The PCNL dripper feature ensures that each plant receives the same amount of water at the same time. A built-in check valve assures that all the drippers will turn on – when the system is fully pressurized – and off at the same time. Dripper Stake Assembly with PCNL dripper offers high performance for a very low cost per plant position. Why Dripper Stake Assemblies? Higher Uniformity = Higher Crop Values Most sprinkler systems lack uniform coverage and this creates wet and dry areas. Plant foliage interferes with water reaching the container. The result is a necessity to overwater many plants in order to provide adequate water to the dry areas and to overcome the interference of foliage. Netafim Dripper Stake Assemblies overcome these obstacles by delivering water directly to the plant. Each dripper adjusts itself automatically to the system pressure resulting in a watering uniformity of 94% – even on slopes. Since all water is delivered directly to the container, there is no run-off – no overspray into the aisles saving water, fertilizer, and energy. Product Advantages Provide Uniform Flow Distribution Maintains a Uniform FLow Rate with the widest Compensation Range 7 to 58 psi Patented pressure differential system maintains uniform flow rate at different inlet working pressures (within the recommended range) ensuring exact distribution of water and nutrients Industry’s widest flow path and wider dripper cross section allow large particles through the dripper’s short flow path Continuous self-flushing system, even while irrigating, provides improved resistance to clogging Applications Vineyards Orchards Greenhouses and Nurseries Ideal for soilless substrates and hydroponic applications Dripper Stake Components PC Drippers: Pressure Compensating to provide a constant flow from 10 to 45 psi and has a built-in check valve to ensure instantaneous on-off at system shut-down. Angle Barbed Stake: Unique flow channel down the length of the stake directing the water into the container. It also has a pointed end for easy container insertion. Super Flex UV White™ Polyethylene (PE) Tubing: Super Flex UV White™ PE Tubing produces cooler water temperatures and enhances plant growth. Made from the highest quality plastics with excellent Ultra-Violet (UV) resistance, our reflective white tubing is completely opaque to prevent algae growth. This tubing is not coated or layered white, it is solid white for long-term durability. It can withstand heat, direct sun and harsh chemicals.
$33.35
-
Netafim Netafim .5 GPH Single Drip Stake Assembly 48" (SOLD AS SINGLES, NOT BUNDLE)
Netafim single dripper stake assemblies come fully assembled and streamline the installation process. Choose between 18, 24, 30, 36 or 48 inch assemblies that can install right where you need it. Dripper assembly uses a 0.5 gph pressure compensating emitter with CNL check value, 18, 24, 30, 36 or 48 inches of Super Flex Tubing and an angled barbed stake. Minimum operating pressure is 10 psi. Pair with the Netafim Punch Tool, Netafim UV Polyethylene Tubing and Netafim Techlock fittings and fine tune your drip irrigation system.
$3.89
-
Netafim Netafim .5 GPH Single Drip Stake Assembly 36" (PACK OF 25)
Netafim single dripper stake assemblies come fully assembled and streamline the installation process. Choose between 18, 24, 30, 36 or 48 inch assemblies that can install right where you need it. Dripper assembly uses a 0.5 gph pressure compensating emitter with CNL check value, 18, 24, 30, 36 or 48 inches of Super Flex Tubing and an angled barbed stake. Minimum operating pressure is 10 psi. Pair with the Netafim Punch Tool, Netafim UV Polyethylene Tubing and Netafim Techlock fittings and fine tune your drip irrigation system.
$81.02
-
Raindrip Raindrip® Hole Punch - Professional
Designed for comfortable use. Punch holes in 1/2in, 5/8in or .710in hose to insert PC drippers or 1/4in fittings.
$23.09
-
Raindrip Raindrip® Poly Tubing - 1/2in Diam x 50ft - Coiled
Main supply line for most drip installations. Can be buried or left out on the surface in any weather. Can be used with Raindrip universal fittings to work with any large diameter tubing.
$16.99
-
Netafim Netafim™ Polyethylene Irrigation Tubing - 100ft Roll - 3/4in - Black - 0.820in ID x 0.940in OD
The Netafim™ Polyethylene Irrigation Tubing is designed for dependable water distribution across a range of agricultural and controlled environment applications. It is made from low density polyethylene resin for UV and acid resistance and is offered in multiple colors and coil or reel options for surface, subsurface, or suspended installations. Product Code: 19951-000025 / 14082094-01 Product Type: Polyethylene Irrigation Tubing Product Specifications Color: Black Size: 3/4in x 100ft Roll Inside Diameter: 0.820in Outside Diameter: 0.940in
$34.99 $29.99
-
Raindrip Raindrip® Hole Plug - 20/Card
Double ended, double-duty plugs seal either large or small holes in 1/2in, 5/8in or .710in hose.
$2.59
-
Raindrip Raindrip® Hose Support Clamp - For Use with 5/8in-1/2in Tubing
Molded clamp ideal for fastening a hose to posts, beams, fences, decks, patios and walls. Includes pre-inserted nail.
$2.89
You have seen 132 out of 132 products