This residential and light commercial grade in-line valve replaces Rain Bird and other irrigation valves installed below ground with 1 inch female threaded inlet and outlet. It can be used with any 24 volt AC irrigation timer. Its unique reverse-flow design helps prevent flooding in the event of internal diaphragm failure, keeping the valve closed and saving water. This valve can be applied with all types of watering devices including Rain Bird spray heads (1800, 600), and rotors (22SA, 32SA, 42SA+, 52SA, LG3 and AG5). Use in-line valves in locations where the use of a pressure vacuum breaker (PVB) or a double-check valve is required by code to protect against backflow. Check your local codes to determine what type of valve is required. After installation and before startup, always the flush system of dirt and debris manually using the valve's external bleed screw.
Reliable, non-clogging design
Reverse Flow design reduces stress on diaphragm for dependable operation
In-line design minimizes pressure loss of dirt and debris during installation and system start-up
24 VAC, 50/60 Hz automatic operation or manual activation with bleed screw
Works with any standard sprinkler timer
Designed for below-ground installation, out of sight and away from playful hands
Energy efficient, low power encapsulated solenoid with captured plunger for long lasting dependability
1 inch female threaded inlet and outlet (use 1 inch MPT threaded pipe adapters with Teflon tape)
Heavy duty construction
Mother Nature waters from the top, and so do these commercial quality drip stakes. By using these, you can run a top watering system that is virtually clog-free. Top watering also has the advantage of preventing fertilizer salt build up.
The 8-in Tubing Support Stake holds a 1/8" microtube in place in your container. Use only for direct connection to a single barb-outlet PC Jr emitter or a Muti-Outlet PC Bubbler - use the Arrow Dripper if using a splitter manifold. The Tubing Support Stake does not restrict flow as an Arrow Dripper does. Connect an Tubing Support stake with a 1/2 GPH Netafim PCJ Dripper (using a length of 1/8" Super-Flex tubing) and it will output 1/2 GPH. Connect it to 2 GPH Dripper and it outputs 2 GPH. Grey color gives a more appealing look when used with grey/white tubing.Put water exactly where you need it using Tubing Support Stakes together with your PCJ Pressure Compensating Drippers
The Netafim™ Polyethylene Irrigation Tubing is designed for dependable water distribution across a range of agricultural and controlled environment applications. It is made from low density polyethylene resin for UV and acid resistance and is offered in multiple colors and coil or reel options for surface, subsurface, or suspended installations.
Product Code: 19951-000060 / 14082094
Product Type: Polyethylene Irrigation Tubing
Product Specifications
Color: Black
Size: 3/4in x 500ft Roll
Inside Diameter: 0.820in
Outside Diameter: 0.940in
The FloraFlex Bubbler Flow Insert allows you to deliver water to your plants at your desired flow rate (2, 6, 10, or 20 GPH). Use with FloraFlex Multi Flow Bubbler.
Cultured Solutions® Clear Line is designed to keep drip irrigation lines and emitters clean and free of mineral deposits during cropping cycles. Implementation of Clear Line protects drip irrigation systems reducing costly repair and replacement of components.
Compatibility: Designed for use with 6" rockwool cubes, smartpots, and fabric pots
Louvers: 26 flower-designed louvers for precise water, nutrient, and air delivery
Automation: Requires (2) FloraClips and Tubing (1/4" OD) for automated feeding
Stability: Features stakes on the bottom for enhanced stability
Drainage: Holes in all four corners allow for efficient leftover water drainage
Material: Made from BPA and lead-free plastic for safety and durability
Cleaning: Dishwasher safe for easy maintenance
Stackable: Stackable design for space-saving storage
Reusability: Reusable for long-term use
Patent Status: Patent pending for its innovative design
Compatible with all 4" rockwool cubes.
13 flower-designed louvers.
Use (1 or 2) FloraClips and Tubing (1/4" OD) to automate your feed.
Stakes on the bottom add extra stability.
Holes in all four corners allow for leftover water drainage.
Made from BPA and lead-free plastic.
Dishwasher safe, stackable and reusable.
The FloraFlex Bubbler Flow Insert allows you to deliver water to your plants at your desired flow rate (2, 6, 10, or 20 GPH). Use with FloraFlex Multi Flow Bubbler.
Mother Nature waters from the top, and so do these commercial quality drip stakes. By using these, you can run a top watering system that is virtually clog-free. Top watering also has the advantage of preventing fertilizer salt build up.Sold in packs of 100
The FloraFlex Bubbler Flow Insert allows you to deliver water to your plants at your desired flow rate (2, 6, 10, or 20 GPH). Use with FloraFlex Multi Flow Bubbler.
The white outer layer helps deflect light and keep temperatures cooler inside of the tubing, the opaque black inner layer blocks all light which prevents algae buildup in the tubing and helps to keep your system clean.BPA and Lead free Polyethylene
The FloraFlex FloraCap is a patent-pending revolutionary tool for top feeding that also helps eliminate algae. The FloraCap 2.0 was redesigned to give you a more consistent flow rate, even distribution, a slightly increased air flow and improved stabilization. Place the FloraCap on top of your 4, 6 or 8 in rockwool cubes, maximizing your space in the vegetative cycle. Fill the cap with water and nutrients by hand or automate with FloraClips. The 4 in cap features 13 flower designed louvers and the 6 and 8 in cap feature 26 flower designed louvers that delivers water, nutrients and air to the medium while blocking light. The FloraCap strategically covers the top of the media, allowing the root zones to dry at a more consistent rate and delivering the necessary oxygen your plants need to thrive. Algae disappears, healthy roots fill the medium and blossoms multiply.
The FloraFlexTM Tubing is a flexible premium vinyl, food grade hose. At 1/4" OD, our Tubing fits perfectly with ALL FloraFlexTM tools. Color coordinate and automate!Features100 feet in length1/4 inch OD3/16 inch IDFlexible premium vinylFloraFlexTM GreenFloraFlexTM Logo printed on the tubingBenefitsUsed to automate all FloraFlexTM toolsIncludes(1) 100' 1/4" OD Tubing
Netafim Single dripper stake assemblies will reduce set up time considerably. This 30-inch assembly will install right where you need it. Dripper assembly uses a 0.5GPH pressure compensating emitter with CNL check vale, 30 inches of Super Flex Tubing and an angled barbed stake. Minimum operating pressure is 10PSI.Delivering superior uniformity with slow, low-flow drippers for even and uniform soil wetting without the run-off.The Netafim Dripper Stake Assembly is ideal for soilless substrates and hydroponic applications because each plant pot or rock wool cube receives an equal and precise amount of water nutrients.The slower and lower flow wet the soil media thoroughly without any run-off around the edges of the container. This allows longer runs on smaller polyethylene supply laterals maintaining excellent uniformity while holding down system costs. The PCNL dripper feature ensures that each plant receives the same amount of water at the same time. A built-in check valve assures that all the drippers will turn on – when the system is fully pressurized – and off at the same time. Dripper Stake Assembly with PCNL dripper offers high performance for a very low cost per plant position.Why Dripper Stake Assemblies?Higher Uniformity = Higher Crop ValuesMost sprinkler systems lack uniform coverage and this creates wet and dry areas. Plant foliage interferes with water reaching the container. The result is a necessity to overwater many plants in order to provide adequate water to the dry areas and to overcome the interference of foliage. Netafim Dripper Stake Assemblies overcome these obstacles by delivering water directly to the plant. Each dripper adjusts itself automatically to the system pressure resulting in a watering uniformity of 94% – even on slopes. Since all water is delivered directly to the container, there is no run-off – no overspray into the aisles saving water, fertilizer, and energy.Product Advantages
Provide Uniform Flow Distribution
Maintains a Uniform FLow Rate with the widest Compensation Range 7 to 58 psi
Patented pressure differential system maintains uniform flow rate at different inlet working pressures (within the recommended range) ensuring exact distribution of water and nutrients
Industry’s widest flow path and wider dripper cross section allow large particles through the dripper’s short flow path
Continuous self-flushing system, even while irrigating, provides improved resistance to clogging
