Determines soil pH and fertility level. Both tests can be completed in about a minute. Requires one AA battery. Complete instructions include how to adjust pH and select appropriate fertilizers according to soil conditions.
The Netafim Medium Flow Pressure Regulator will instantly respond to variations in pressure assuring the 35 PSI outlet pressure will remain constant regardless of inlet pressure. Non-corrosive, high quality plastic bodies withstand commonly used fertilizers and chemicals. This sealed regulating unit uses a stainless steel spring and screw that are field replaceable and easy to maintain. Maximum Operating Pressure: 145 PSI.
For use with HM Digital's PH-200 and PH-80 (as well as other brands of pH meters). Always make sure your sensor is kept in an electrode storage solution. If dry, refill the pH meter cap with the PH-STOR storage solution. The sponge should be moist (not soaking wet).
The Grow1 Inline Garden Water Filter features an inline, high-flow rate design utilizing KDF-85 media to reduce 99% of water-soluble heavy metals. KDF-85 media is especially efficient at removing iron and hydrogen sulfide and is used to control the buildup of bacteria and algae. Like KDF-55 media, KDF-85 uses a similar method to effectively remove chlorine, chloramines, chlorinated hydrocarbons, hydrogen sulfide, iron, and metals like lead, arsenic, aluminum, mercury, and cadmium from water. Grow1 Water Filters may be used independently or to protect existing water filtration/purification systems. Included with each filter is a flexible hose protector which allows the hose to bend at sharp angles while still delivering your filtered water unhindered!
What is KDF?
Kinetic Degradation Fluxion (KDF) is a high-purity copper-zinc formulation. KDF uses a basic chemical process which is known as redox (oxidation/reduction). This chemical process removes iron, chlorine, chloramines, mercury, lead, and hydrogen sulfide from water supplies and is used in pretreatment, primary treatment, and wastewater applications. KDF media supplement or replace existing technologies to dramatically extend system life, reduce heavy metals, reduce microorganisms, lower total cost, and decrease overall required maintenance.
How Does KDF Work?
The KDF redox process works by exchanging electrons with contaminants which converts many contaminants into harmless components. Redox involves the transfer of electrons between two molecules which changes these molecules into different elements. The loss of electrons can change contaminants into less harmful, or even harmless, elements. Some harmful contaminants are electrochemically bound to the KDF media while others are converted to harmless components, such as chlorine to chloride.
pH measuring equipment must be cleaned and calibrated regularly to ensure they are giving the user accurate readings. pH instruments are calibrated to pH 7.0 first (buffer) then to pH 4.0 (slope). Calibration Solution should be stored in a cool place out of direct sun and heat. They should be stored with the lids securely tightened.
Botanicare® Original Grow Trays drain screen provides 3 punch outs making access to plumbing lines easy. Designed for 4ft & 5ft Botanicare® Grow Trays.
The Netafim Self Piercing Emitters have a sharp barb, making them easy to install, no tools required. These emitters have a 1.74 PSI internal check valve that helps prevent low emitter drainage holding back up to a 3.9 ft column of water. The anti-siphon operation prevents contaminants from being drawn into the emitter. The Self Piercing Emitters are pressure compensating and deliver the same flow from 10.15 to 58 PSI. Exclusive TurboNet flow path design regulates flow and provides continuous self-cleaning action during operation. Recommended minimum filtration of 120 mesh.
An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Multi Flow Bubbler.
Interior threads which accept 3/4 in standard pipe thread. Use as ebb and flow fittings and bulkhead fittings. Increased versatility: thread PVC pipe fittings into bulkhead fittings - ideal for use in aeroponic and drip applications.
An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Multi Flow Bubbler.
Our complete line of fittings is known for its superior performance and reliability. These non-corrosive plastic fittings are guaranteed to provide a secure, watertight connection. These fittings offer strength and durability. Hydro Flow Barbed Ball Valves regulate your hydroponic irrigation systems with a simple turn of the knob.
fill/drain fitting. This is the fitting that is commonly used to transfer nutrient solution between the flood table and the reservoir in flood & drain hydroponic systems via tubing and a pump.
The FloraFlex Matrix System is a patent pending first of its kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your potted plants. The Round Matrix System can be used with pots ranging from 7.5-18 Diameters. The Matrix was not designed to be suspended above, but rather directly on top of, or touching the medium. There are two dimensions for each unit, the larger one is the outer diameter. Measure your pot and purchase the Matrix that fits inside of it. You will need a Matrix unit, the same size Matrix Pad (optional), and the correlating Matrix Circulator. Use with Open Flow Bubblers (not the Multi Flow Bubbler) for Maximum Pressure.
Use these high quality barbed 3/16 in connectors for your irrigation systems or hydroponic systems. Feature 3 barbs for a tight fit. Bump stop assures fittings are completely and securely inserted in tubing. Made with 100% virgin plastic.
An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Multi Flow Bubbler.
An 8 outlet manifold that delivers water and nutrients to your plants at the pressure of your choice. The FloraFlex manifold system takes seconds to put together and/or take apart, none of our parts need glue or threading during assembly. This assembled unit includes our new individual products: Flora Pipe Fitting (T or Elbow in 1 or 3/4 in), Flora Valve, Quick Disconnect, and Multi Flow Bubbler.
The FloraFlex Matrix Circulator is part of the Matrix System, a patent pending first of its kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your plants. The Round Matrix system can be used with pots ranging from 7.5"-18" Diameters. The Square Matrix System can be used with the PotPro System, Rockwool cubes, or any other container you desire to use them with. You will need a Matrix unit, the same size Matrix Pad, and the correlating Matrix Circulator. Use the 2 1/4" Circulator with the Square 4", Square 6", Round 7.5" and Round 9" Matrix.
The 8-in Tubing Support Stake holds a 1/8" microtube in place in your container. Use only for direct connection to a single barb-outlet PC Jr emitter or a Muti-Outlet PC Bubbler - use the Arrow Dripper if using a splitter manifold. The Tubing Support Stake does not restrict flow as an Arrow Dripper does. Connect an Tubing Support stake with a 1/2 GPH Netafim PCJ Dripper (using a length of 1/8" Super-Flex tubing) and it will output 1/2 GPH. Connect it to 2 GPH Dripper and it outputs 2 GPH. Grey color gives a more appealing look when used with grey/white tubing.Put water exactly where you need it using Tubing Support Stakes together with your PCJ Pressure Compensating Drippers
Distribute the output of your air pump precisely with this individually controllable 8-outlet air manifold. Outlets can be individually opened or shut for total aeration control. Constructed from a high-quality blend of copper and stainless steel. Double-barbed ends for tight seal with tubing.Recommended tubing sizes:Input: 5/16" internal diameterOutput: 0.17" internal diameter
2 Way Splitter 1/4 in. This is a Y splitter for multiple reservoirs for the Stealth RO™ system or the Small Boy™ system as well as any other system that takes 1/4 in tubing."
