A smart outlet controller to optimize your environment for growing by managing CO2 output and removal.
Supports and independently programs CO2 regulators and exhaust fans for use in indoor grow settings.
Custom CO2 and fan programming dynamically alternate to activate in response to carbon dioxide levels.
Other programming includes precision cycles, night scheduling, and environmental data tracking.
Advanced sensor precisely measures your grow space climate to ensure accurate readings.
PRODUCT DESCRIPTION
An intelligent carbon dioxide controller designed to maintain proper CO2 levels in your home or grow space. By pairing this smart outlet controller with your CO2 output and exhaust system, you can create an effective environment for your plants to grow in. Equipped with two outlet plugs that are independently programmed and allow you to mix and match CO2 regulators and exhaust fans. This smart controller will alternate between CO2 and fan trigger programming to dynamically increase or decrease carbon dioxide levels, respectively. Track the state of your grow space through its state-of-the-art sensor as it delivers fast and stable readings.
SMART RESPONSE TO CO2
In addition to CO2 and fan programming that dynamically trigger in response to changing carbon dioxide levels, this outlet controller also features cycles for customized activations. Set schedules and alarms to keep yourself on top of your grow space environment while ensuring CO2 content in your grow space stays at safe levels at night. Effectively track historical data of CO2 levels over time, featuring high and low PPM level thresholds for custom data spreads.
COMPATIBILITY
This smart CO2 controller includes two outlets to power and independently program CO2 regulators and exhaust fans. Able to support up to 1100W. Fit for use to monitor and adjust carbon dioxide levels in home and grow settings like greenhouses, grow rooms, grow tents, workrooms, labs, and more.
Vivosun GrowHub E25 Controller, as an expansion port for GrowHub E42/E42A supporting SGS Devices, is WiFi Controllable and easy to install and use.
Flexible Combinations: The GrowHub Controller E25 supports SGS devices like the AeroLight, AeroZesh, and AeroWave E, allowing you to freely combine devices in your grow tent; w/ RJ45 cables, you can connect multiple AeroLights.
App Controlled: The GrowHub Controller is WiFi-enabled to allow remote monitoring and control of equipment w/ the Vivosun App from anywhere, anytime - from your couch to abroad; Expand the controller’s capabilities w/ grow recipes and other powerful settings.
Plug and Play: To install the E25, you only need to insert it to the Type C port of your SGS devices and connect it to the WiFi; Small size and compact design w/ one button for WiFi configuration and a clear status indicator light, you’ll get more flexibility and ease of use.
Smart Grow: w/ a smart auto-mode and professional grow recipes settings through the App, you can set your lights, circulation fans, and duct fans based on the different growth stages, and maximum yield w/ minimal effort.
Expansion to GrowHub E42/E42A: GrowHub E25 can either schedule independently or share the same schedule w/ GrowHub E42./E42A; You can add E25 and E42/E42A to the same garden on Vivosun App, and use E25 as an expansion port for E42/E42A.
A splitter hub that connects same-type grow devices to UIS™ controllers to follow shared programming.
Distributes one set of smart programming from a single port to up to four UIS devices to follow together.
Compatible with digital smart controllers like CONTROLLER 69, CONTROLLER 69 PRO, and more.
Connects growing equipment like inline fans, humidifiers, and LED grow lights under shared programming.
Capable of linking UIS devices and additional hubs together in up to three tiers in a multi-level array.
Expand wall outlets and control your equipment with this 8-outlet power strip with surge protection and built-in timer. Offers 4 timed outlets and 4 always-on outlets, with indicator lights for each type. Timer has 15-minute increment pins. Timer override switch provided. Lighted power switch also acts as circuit breaker/reset.Features4 timed, 4 constant outletsPower indicatorSurge protector6' power cordCircuit breaker switch for safety
The Hydrofarm Electronic Water Timer makes watering your plants a breeze. This single-station analog timer attaches directly to your garden hose and automatically controls sprinklers, drip systems or soaker systems. It features two simple dials that allow gardeners to set the frequency of watering from 1 hour to 1 week, and the run time from 1 minute to 2 hours. This timer is easy to use and requires no wiring. Just attach it to your hose, set it, and forget it.Easy to useSuitable for all garden watering systemsNo wiring requiredSet watering frequency from 1 hour to 1 weekRun time can be set from 1 minute to 2 hoursBattery powered (requires 2 AAA batteries not included)
Powerful 1000W heater with smart AI control and a multi-configuration design to optimize the climate for all plant growth stages.
Temperature and VPD programming powered by adaptive AI that dynamically adjusts heat output to maintain your target environment.
Utilizes individual PTC plates with PWM control to deliver 10 true heat levels or intake fresh air for balanced climate control.
Dual ports enable you to duct directly into your grow space or create a closed-loop setup for optimal heating efficiency (ducting not included).
Connects with UIS controllers for WiFi app connectivity—unlocking advanced automations, data tracking, alerts, and grow guides.
Intelligent Climate Control for Every Growth Stage
Experience precision-engineered climate management with this powerful 1000W AI-driven heater. Designed to optimize growth through every stage, it automatically adjusts temperature, airflow, and VPD to maintain your target environment. Individual PTC plates with PWM control deliver 10 true heat levels or fresh air intake for balanced conditions, while dual duct ports support both open- and closed-loop setups for versatile integration. This product is ETL-certified with safety features including tip-over alarms, flame-retardant materials, and overheat protection with auto-restart it delivers performance you can trust. Designed exclusively for indoor use. Operate only in controlled environments with humidity between 30%–65% RH, including incoming airflow. Do not use outdoors or in high-humidity areas. Do not use with humidifiers in closed-loop setups. Mist may enter intake ducting and damage the heater. Plug heaters only into a grounded wall outlet with surge protection. Never use extension cords or power strips, as this may cause overheating or melting. Do not share the outlet with other devices.
Adaptive AI for Predictive Climate Management
Powered by adaptive AI, the system continuously learns from your environment to maintain precise temperature and VPD targets. Its intelligent algorithm dynamically adjusts output to match your programmed ranges, responding instantly to environmental fluctuations, throttling in precise percentages to deliver unmatched accuracy and control. When connected through UIS controllers, growers can access real-time data tracking, alerts, and advanced automation to maintain the perfect climate 24/7.
Dual Airflow Modes and Flexible Ducting Options
Engineered for versatility, this unit offers both heat and fresh air intake outputs to achieve balanced environmental control. Dual duct ports allow easy setup in open-loop configurations for fresh air exchange or closed-loop systems for maximum heat efficiency. Whether you’re optimizing for optimal heat retention or airflow renewal, this modular design provides flexible, precise control over your grow space. Ducting not included.
A cable to connect UIS controllers to compatible devices such as fans, lights, outlets, and humidifiers.
Fully compatible with all UIS devices including CLOUDRAY, CLOUDLINE, IONFRAME, CLOUDFORGE, and more.
Fully compatible with UIS controllers including CONTROLLER 69 PRO, CONTROLLER 69 PRO+ and CONTROLLER 63.
Fully compatible with CONTROLLER AI+, supporting all device identification and advance functions.
Compact design engineered to fit with UIS™ connectors and ports and ensure a firm, secure connection.
Product Description
An extension cable designed to connect AC Infinity controllers to smart devices like fans, grow lights, humidifiers, and heaters for use in grow applications. This maximizes the utility of your smart controller by extending its reach to compatible devices while providing intelligent programming like climate triggers, timers, and scheduling. Its compact design is engineered to fit in UIS connectors and ports to ensure a tight, secure connection. Fully compatible with Controller AI+, enabling it to control device-exclusive functions like clip fan oscillation and supports unique device identification.
Applications
This cable is used to extend the connection between your existing AC Infinity controller and UIS devices, compatible with the following:
Controller AI+ – AI-Powered Controller
Controller 69 PRO/PRO+ – Grow Tent Controllers
CLOUDFORGE Series – Humidifiers
CLOUDLINE Series – Inline Duct Fans
CLOUDLIFT Series – Floor Wall Fans
CLOUDRAY Series – Clip-on Circulation Fans
CLOUDWAY Series – Whole House Fans
AIRLIFT Series – Shutter Exhaust Fans
AIRBLAZE Series – Fireplace Blower Fans
AIRTITAN Series – Crawl Space & Basement Fans
IONFRAME Series – Commercial LED Grow Lights
IONBOARD Series – LED Grow Light Boards
IONBEAM Series – LED Supplemental Lighting
TERRAFORM Series – Air Conditioners
THERMOFORGE Series – Heaters
Autopilot APC8200 CO2 Monitor & Controller with Memory offers a simple and affordable way to control, monitor and record CO2 levels over an adjustable period of time. Trace your room's CO2 levels over minutes, hours, or up to 7 days with this easy-to-use controller. The APC8200 also boasts a fully customizable CO2 setpoint and deadband. Adjust and review your CO2 levels when you want to and how you want to. The APC8200's memory feature gives growers a real edge in fine-tuning the grow room environment. Optimize your CO2 levels with this precision controller from Autopilot!
FEATURES:
Fully customizable ppm deadband and CO2 setpoint allow flexibility in programming
Trend Chart records CO2 levels per minute, hour, day and week for accurate analysis of CO2 distribution
Adjustable Trend Chart Zoom levels let you trace your ppm levels
Remote CO2 sensor probe w/photocell & 15' data cable lets you take readings from proper grow room locations
2-Channel Low Drift NDIR Sensor precisely reads CO2 ppm levels
Green LED identification lights inform you of the unit's status at all times
APC8200 Error Codes:
Fault Icon Description of the fault Suggested Actions
Err4 IR lamp error Please reconnect power adapter, if the Err4 still appears, please contact the service department.
Err5 Internal parameter error Please reconnect power adapter, if the Err5 still appears, please contact the service department.
Err6 Sensor unit Connect Error Please reconnect sensor unit and redo power on, if the Err6 still appears, please contact the service department.
Err7 temperature or humidity error Please turn off power adapter, and put the device in a dry place more than 12 hours.
Err8 Internal calculate error Please reconnect power adapter, if the Err6 still appears, please contact the service department.
The APCTART2 is a cycle timer controller with day and night detection. It works to control any application requiring a device to be turned on and off at precise intervals. This timer has a wide range of uses including controlling hydroponic pumps, CO2 injection, turning on and off exhaust fans, misters and more.The cycle timer is adjustable for operation during the day, during the night, or all of the time (24 hours). We added a Memory-lock feature which will lock the set points into memory for consistent performance, even if the knobs are accidently bumped.Controls 120V pumps, fans, and more on a periodic repeat cycle Adjustable "ON" duration spans from 1 second to 60 minutes Adjustable "OFF" duration spans from 1 minute to 14 hours Built-in photocellFunctions during the day, during the night, or 24 hours 120v, 15 amps max
Using a timer to automate your lighting adds convenience and encourages productive growth with consistent hours of light. Timers are also essential for many hydroponic system applications.Features1 second on/offUp to 8 on/off cycles per dayExcellent for hydroponic systems15 ampUL-listedFOR MORE THAN 8 ON/OFF CYCLES PER DAY, USE APCTART
Using an analog timer to automate your lighting adds convenience and encourages productive growth with consistent hours of light. Timers are also essential for many hydroponic system applications.Features15 minute on/off15A/1725WGreat for lighting, pumps, etc.Includes convenient clam shell packagingUL-listed
This is a replacement CO2 sensor for the Autopilot APC8200
Remote CO2 sensor probe w/photocell & 15' data cable lets you take readings from proper grow room locations
2-Channel Low Drift NDIR Sensor precisely reads CO2 ppm levels
Control multiple lights from one timer or controller device. Power is wired directly into the four-outlet timer box and all of the outlets are controlled by one detachable 120V trigger cable. Rated for 30 amps at 120/240 volts. The trigger cable can be plugged into a standard 24-hour timer or environmental controller. Three year no hassle warranty.APCL4DX has four 120/240 volt style outlets which allow running your ballasts at 120/240 volts without having to change out your ballast power cords.FEATURES:4000W 4-light controller Premium quality industrial grade relay X-style outlets allow 120V or 240V ballast operation 30A maximum Attached 120V trigger cable Improved terminal blocksSpecs:RATED AMPERAGE: 30 FREQUENCY: 50/60Hz VOLTAGE: 120/240
Autopilot 24 hr Day & Night Cooling/Heating ThermostatThe APCET2 is a temperature controller that can be used as a cooling OR a heating device. It automatically powers the device connected based on the selected day and night set points. The user can choose to have different day and night temperature set points that are automatically detected by the built-in photocell. The knobs make it easy to adjust the settings. We added a Memory-lock feature which will lock the set points into memory for consistent performance, even if the knobs are accidently bumped.
Controls heating or cooling equipment with both day/night set points
Includes 20' remote precision temperature sensor
Temperature control differential +/- 3F
Built-in photocell
120v, 15 amps max
Control up to eight lights from one timer or controller device. 240V power is wired directly into the eight outlet timer box, and all of the outlets are controlled by one detachable 120V trigger cable. Rated for 60 amps at 120/240 with eight 120/240V X-style receptacles. The light controller is backed by a hassle free 3 year warranty. APCL8DX has eight 120/240 volt style outlets which allow running your ballasts at 120/240 volts without having to change out your ballast power cords. FEATURES:8000 Watt, 8 light controller Premium quality industrial grade relay X-style outlets allow 120V or 240V ballast operation 60 Amp maximum (30 amps x 2 relays) Attached 120V trigger cable Upgraded terminal blocksSpecs:RATED AMPERAGE: 60 FREQUENCY: 50/60Hz VOLTAGE: 120/240
A smart sensor probe designed to detect temperature and humidity conditions for AC Infinity universal controllers. Using a Swiss-made thermal-alloy head, the climate sensor uses type 316 SAE steel that can adapt to rapidly changing climate conditions. This allows it to provide pinpoint accurate temperature and humidity readings and enables you to quickly adjust your fan to your cooling or heating needs. The corded probe has an IP-44 rating, able to withstand humid conditions by resisting splashing water and dust. Comes in 20 feet in length for spot detection coverage applications such as grow tents, HVAC ductwork, tool sheds, and AV component closets.
A carbon dioxide regulator designed to help create the ideal environment for plant growth by managing the output of CO2 into the air. Features a flow meter with a pressure gauge that accurately measures gas flow as well as the remaining gas levels. These measuring systems will enable you to determine the exact amounts of CO2 to release that will improve your plant’s growth rate. They are built into a durable brass construction with a solenoid valve that ensures a proper stream with no leakage. Fits into many standard tanks with threaded valves to function as a CO2 generator in grow tent or grow room settings.
The MC720 kit includes the MC122 controller and the MP810 dosing pump to automatically monitor and fine-tune pH levels. Just set your pH parameters and let the Milwaukee pH Controller and pump do the rest.The Milwaukee PRO pH controller kit is preferred by people looking to dial in their testing program when they have an ongoing need to maintain levels. Common uses are nutrient tanks and aquariums.The Milwaukee PRO pH controller and pump offers:ACCURACYThe Milwaukee PRO pH controller offers an accuracy to ±0.2 pH with two point manual calibration.AUTOMATIONThe controller provides a control range of 5.5 to 9.5 pH with alarms that activate when readings are higher or lower than set point.COMPATIBLE DOSING PUMPThe Milwaukee MP810 dosing pump (designed specifically for use with the MC122) is included in the kit.EASY INSTALLATIONThe MC720 pH controller and pump kit comes with a complete mounting kit including a probe holder.DESIGN FEATURESFast easy to read current results with large digital LCD readout Accurate to ±0.2 pH (0.0 pH to 14.0 pH) with the user selectable high/low set points Simple two-point calibration for increased accuracy with manual trimmers for easy adjustment Gel-filled, double junction lab grade pH electrode for low maintenance and high performance 6.5 feet probe cables for extra flexibility when testing 12 VDC power supply Pump provides a maximum pressure of 1.5 bar or more than 50 feet of head pressure with a 0.16 GPM dosing flow.USE AND CARE pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.SENSING BULBThe glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.REFERENCE JUNCTIONThe reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH probe will no longer function.You can extend the life of your pH electrode in the following ways.STORAGEThe pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.Storing in pH probe storage solution or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe.The best way to store the probe is with the probe's cap filled with storage solution or calibiration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.CLEANINGResidue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution.CALIBRATIONThe pH sensing bulbs become less sensitive over time so make sure that you are calibrating reguarly to keep your PRO pH controller accurate. Also, calibrate after cleaning or a long period of storage.MC122 SPECIFICATIONSRange: 0.0 - 14.0 pH Resolution: 0.1 pH Accuracy: ±0.2 pH Set point: 5.5 to 9.5 pH Calibration: Manual 2 points Alarm Active when reading is higher or lower than set point Dosing Contact: 1 power plug for CO2 dosing pH electrode: MA911B/2 (included) Environment: 0 to 50°C / 32 to 122°F; max RH 95% Power Supply: 12 VDC adapter (included) Power Drivers: 115 VAC, 2A, 60Hz or 230 VAC, 1A, 50Hz Mounting kit (Included) Dimensions: 5.9 x 3.2 x 1.35 inches Weight: 6.3 ounces (meter only)MP810 SPECIFICATIONSMax. Flow: 0.6 L/h Max. Pressure: 1.5 bar Squeeze tubing: Santoprene Ext. Tube connection: 6 mm Power supply: 240 VAC, 50-60 Hz or 110 VAC, 60 Hz Power consumption: 0.42 W Dimensions: 100 x 106 x 108 mm Weight: 17.6 oz.
Complete control of your grow room from up to 150 ft away without wires, the Hyperion1 Wireless/Environmental/Lighting controller is the solution! Monitor and control the CO2, temperature and humidity during the day night periods. Then add a fully functional lighting controller (via trigger cordsets) that includes a high temp shut-off, 15 min cool down with preset and custom lighting schedules. It even tells you when to change your grow bulb. 15 Amps maximum/120 V / 60 Hz. US Patent No. D660,252.
The Titan Controls Helios 8 is a Professional Series 8-light controller. With the attached dual trigger cords you can establish two separate lighting schedules. The Titan Controls Helios 8 was constructed with commercial-grade "ballast-rated" relays. It works with both 120V and 240V power cords and can be hooked up through a 50 amp input circuit.
The 8 light controller operates up to 8000 W of grow lights in your garden. It features heavy-duty definite purpose contactors, dual trigger cord sets that give you the flexibility to stagger lighting schedules or delay starting times via an external wall timer and universal outlets that allow the use of 120 V or 240 V cord sets. The controller is housed in a rust-, dust- and moisture-proof enclosure. 50 Amps input power/40 Amps output power/240 V/60 Hz/8000 W.
Built to the high levels of quality Titan Controls is known for, the Spartan Series CO2 Controller/Monitor allows you to supercharge your garden at an affordable price. Capable of controlling both a CO2 regulator or a CO2 generator, this controller gives you precise control over the ppm levels in your garden. Using a Dual Beam NDIR (Non-Dispersive Infrared) sensor, you can monitor your CO2 levels up to 3000 ppm. The unit will also monitor your temperature as well. A built-in photocell ensures that CO2 is only dispersed during the daylight time. The plastic housing resists dust and moisture. 15 Amps Maximum/120 V/60 Hz.
The Trolmaster DSV-1 is a low-voltage output module that can be used on the HCS-1, HCS-2 controllers. The DSV-1 can be addressed to be used as a temperature, humidity, CO2, or timer device module.Multiple voltage outputs are selectable by the user. The DSV-1 can output either 12 or 24 VDC up to .5 amps, or 12 or 24 VAC up to 4.8VA. Once the module is configured it will activate the low-volt device wired to the DSV-1.This allows the user to directly connect low voltage devices such as solenoids, valves, audio visual alarms or any other device that requires 12 to 24 volt AC or DC power to operate.
A smart sensor designed to accurately give climate condition updates to maintain the ideal environment.
Corded probe provides fast-refresh climate readings and daily highs and lows of spot, remote locations.
Connect to our app via Bluetooth to access remote temperature and humidity monitoring and alarms.
Backlit LCD screen with desktop, wall, or magnetic mounting options to place and display anywhere.
Fit for use in many home and grow settings like greenhouses, grow tents, guitar rooms, and basements.
PRODUCT DESCRIPTION
A smart hygrometer designed to provide accurate temperature and humidity readings to help you maintain the ideal environment for your room. This model utilizes our steel thermal-alloy probe to accurately measure climate conditions and generate daily high and low readings of spot locations. Its digital LCD screen can produce a backlight that can display information in darker settings. So whether you are wall hanging, magnet mounting, or desktop placing the temperature sensor, you will be able to quickly inspect your space to react to sudden changes. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment.
ADVANCE CONNECTIVITY
Connect to the AC Infinity app for access to greater control of this smart hygrometer. This includes remote climate readings, trigger alarm programming, and calibrations of temperature, humidity, and VPD readings. You can also receive custom push notifications on your smart device for rapid response to sharp peaks and dips. See historical climate data graphs to track trends and export as a CSV spreadsheet for further analysis.
APPLICATIONS
This smart indoor thermometer for home is fit for use as a grow room thermostat or nursery temperature monitor. Also fit in other grow settings like greenhouses, grow tents, and closet builds. The Bluetooth temperature and humidity gauge can also be used for animal comfort in reptile terrariums or chicken coops. Other home uses include apartments, basements, and guitar rooms where humidity must be kept to a minimum.
