Powerful 1000W heater with smart AI control and a multi-configuration design to optimize the climate for all plant growth stages.
Temperature and VPD programming powered by adaptive AI that dynamically adjusts heat output to maintain your target environment.
Utilizes individual PTC plates with PWM control to deliver 10 true heat levels or intake fresh air for balanced climate control.
Dual ports enable you to duct directly into your grow space or create a closed-loop setup for optimal heating efficiency (ducting not included).
Connects with UIS controllers for WiFi app connectivity—unlocking advanced automations, data tracking, alerts, and grow guides.
Intelligent Climate Control for Every Growth Stage
Experience precision-engineered climate management with this powerful 1000W AI-driven heater. Designed to optimize growth through every stage, it automatically adjusts temperature, airflow, and VPD to maintain your target environment. Individual PTC plates with PWM control deliver 10 true heat levels or fresh air intake for balanced conditions, while dual duct ports support both open- and closed-loop setups for versatile integration. This product is ETL-certified with safety features including tip-over alarms, flame-retardant materials, and overheat protection with auto-restart it delivers performance you can trust. Designed exclusively for indoor use. Operate only in controlled environments with humidity between 30%–65% RH, including incoming airflow. Do not use outdoors or in high-humidity areas. Do not use with humidifiers in closed-loop setups. Mist may enter intake ducting and damage the heater. Plug heaters only into a grounded wall outlet with surge protection. Never use extension cords or power strips, as this may cause overheating or melting. Do not share the outlet with other devices.
Adaptive AI for Predictive Climate Management
Powered by adaptive AI, the system continuously learns from your environment to maintain precise temperature and VPD targets. Its intelligent algorithm dynamically adjusts output to match your programmed ranges, responding instantly to environmental fluctuations, throttling in precise percentages to deliver unmatched accuracy and control. When connected through UIS controllers, growers can access real-time data tracking, alerts, and advanced automation to maintain the perfect climate 24/7.
Dual Airflow Modes and Flexible Ducting Options
Engineered for versatility, this unit offers both heat and fresh air intake outputs to achieve balanced environmental control. Dual duct ports allow easy setup in open-loop configurations for fresh air exchange or closed-loop systems for maximum heat efficiency. Whether you’re optimizing for optimal heat retention or airflow renewal, this modular design provides flexible, precise control over your grow space. Ducting not included.
Powerful 1000W heater with precision controls and a multi-configuration design to optimize the climate for all plant growth stages.
Utilizes individual PTC plates with PWM control to deliver 10 true heat levels or intake fresh air for balanced climate control.
Dual ports enable you to duct directly into your grow space or create a closed-loop setup for optimal heating efficiency (ducting not included).
ETL-certified safety design with tip-over alarms, flame-retardant materials, and overheat protection with auto-restart.
Connects with UIS controllers for WiFi app connectivity—unlocking advanced automations, data tracking, alerts, and grow guides.
Smart, Adaptive Climate Control
Experience precision-engineered climate management with this powerful 1000W AI-driven heater. Designed to optimize growth through every stage, it automatically adjusts temperature, airflow, and VPD to maintain your target environment. Individual PTC plates with PWM control deliver 10 true heat levels or fresh air intake for balanced conditions, while dual duct ports support both open- and closed-loop setups for versatile integration. This product is ETL-certified with safety features including tip-over alarms, flame-retardant materials, and overheat protection with auto-restart it delivers performance you can trust. Designed exclusively for indoor use. Operate only in controlled environments with humidity between 30%–65% RH, including incoming airflow. Do not use outdoors or in high-humidity areas. Do not use with humidifiers in closed-loop setups. Mist may enter intake ducting and damage the heater. Plug heaters only into a grounded wall outlet with surge protection. Never use extension cords or power strips, as this may cause overheating or melting. Do not share the outlet with other devices.
Precision Heat and Fresh Air Output
The system’s individual PTC plates with PWM control deliver 10 true heat levels, maintaining consistent, energy-efficient warmth. Switch seamlessly between heat and fresh-air intake outputs to fine-tune your environment—warming your space when temperatures drop or drawing in cooler air to stabilize conditions. This dynamic range provides the versatility needed to sustain optimal growth year-round.
Dual Duct Design for Flexible Setup
Engineered for versatility, this unit offers both heat and fresh air intake outputs to achieve balanced environmental control. Dual duct ports allow easy setup in open-loop configurations for fresh air exchange or closed-loop systems for maximum heat efficiency. Whether you’re optimizing for optimal heat retention or airflow renewal, this modular design provides flexible, precise control over your grow space. Ducting not included.
A sensor designed specifically for AC Infinity AI Controllers to monitor the presence or absence of water.
Allows AI controller to provide leak detection, alerts, and advance controls via the AC Infinity app, triggering water devices as needed.
Versatile mounting options with both secure suction and powerful magnetic attachments for maximum adaptability.
IP68-rated to guarantee the sensor is safeguarded against continuous immersion in water up to 3 meters in depth.
This sensor is engineered to enhance various settings, from aquariums to industrial water tanks, providing a versatile solution for monitoring and managing water levels.
Product Description
This water sensor is designed specifically for AC Infinity AI Controllers to help monitor the presence or absence of water. It achieves this by sending alerts and activating automated devices to maintain ideal conditions. With an IP68 rating, the sensor can be submerged up to 3 meters in depth for a continuous period. Designed for diverse applications to improve various settings, from aquariums to grow spaces, this device provides a versatile approach to water management.
Intelligent Pairing
When used with our AI controllers and Wi-Fi app, this sensor detects when water levels are low based on its mounted height, allowing your controller to activate devices that help replenish your water supply. It can also deliver real-time leak detection and enable advanced control options with instant alerts. This ensures your space gets the right amount of water at the right time.
Advanced Tracking
This water sensor will play a crucial role in both plant cultivation and aquarium maintenance, providing vital information that helps track optimal growth conditions and healthy aquatic environments. Consistent tracking will enable your controller to automatically adjust watering schedules based on real-time data, leading to healthier growth, increased yields, and stable environments.
A cable to connect UIS controllers to compatible devices such as fans, lights, outlets, and humidifiers.
Fully compatible with all UIS devices including CLOUDRAY, CLOUDLINE, IONFRAME, CLOUDFORGE, and more.
Fully compatible with UIS controllers including CONTROLLER 69 PRO, CONTROLLER 69 PRO+ and CONTROLLER 63.
Fully compatible with CONTROLLER AI+, supporting all device identification and advance functions.
Compact design engineered to fit with UIS™ connectors and ports and ensure a firm, secure connection.
Product Description
An extension cable designed to connect AC Infinity controllers to smart devices like fans, grow lights, humidifiers, and heaters for use in grow applications. This maximizes the utility of your smart controller by extending its reach to compatible devices while providing intelligent programming like climate triggers, timers, and scheduling. Its compact design is engineered to fit in UIS connectors and ports to ensure a tight, secure connection. Fully compatible with Controller AI+, enabling it to control device-exclusive functions like clip fan oscillation and supports unique device identification.
Applications
This cable is used to extend the connection between your existing AC Infinity controller and UIS devices, compatible with the following:
Controller AI+ – AI-Powered Controller
Controller 69 PRO/PRO+ – Grow Tent Controllers
CLOUDFORGE Series – Humidifiers
CLOUDLINE Series – Inline Duct Fans
CLOUDLIFT Series – Floor Wall Fans
CLOUDRAY Series – Clip-on Circulation Fans
CLOUDWAY Series – Whole House Fans
AIRLIFT Series – Shutter Exhaust Fans
AIRBLAZE Series – Fireplace Blower Fans
AIRTITAN Series – Crawl Space & Basement Fans
IONFRAME Series – Commercial LED Grow Lights
IONBOARD Series – LED Grow Light Boards
IONBEAM Series – LED Supplemental Lighting
TERRAFORM Series – Air Conditioners
THERMOFORGE Series – Heaters
Designed to quietly ventilate grow tents, transfer heating/cooling to rooms, circulate fresh air, and cool AV closets.
Features a wired 10-speed fan controller; also compatible with all UIS controllers with intelligent programming.
PWM-controlled EC motor provides quiet and energy-efficient performance with minimal heat and noise.
Mixed flow design with stator blade and hydrodynamic wind circles enables airflow delivery in high resistance areas.
Duct Size: 6” | Dimensions: 7.9 x 12.6 x 8.4 in. | Airflow: 402 CFM | Noise: 32 dBA | Bearings: Dual Ball
Product Description
A smart inline duct fan designed to quietly ventilate hydroponic grow rooms, boost heating/cooling to rooms, circulate fresh air, exhaust projects, and cool AV closets. Featuring an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. It is built with a PWM-controlled EC motor for quiet and energy-efficient performance. The motor box containing the fan’s impeller and blades can be detached from the mounted frame for easy cleaning and maintenance. Includes a smart controller with dynamic climate and time-based programming and can connect to multiple UIS devices. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment.
Precise Speed Controller
The speed controller enables you to set the duct fan’s speed between ten speed levels to optimal noise and airflow levels in various environments. The precise airflow control is supported by the inline fan’s cutting-edge EC motor that is precisely controlled using PWM (Pulse Width Modulation). This enables it to run smoothly at extremely low RPM speeds without generating motor noise. Also features backup memory that retains the last speed setting whenever power is cut off from the controller.
Quiet and Energy Efficient Design
This duct fan uses a mixed-flow design using a stator blade and dual hydrodynamic wind circles, enabling it to deliver airflow even in applications where air movement is restricted. The motor houses dual ball bearings rated at 67,000 hours which allows the duct fan unit to be mounted in any direction. The unit is IP44 rated to be highly resistant to dust and liquids and performs well even in harsh environments.
Applications
This quiet duct fan system is popular in a variety of applications including cooling AV equipment rooms, closets, racks, and cabinets. Due to its low noise and advanced control features, it’s also used in various air circulation and ventilation projects including hydroponic grow rooms and tents, exhausting bathrooms and attics, and other installations.
A heating mat designed to accelerate and improve the success of seed starting and germination.
Features an innovative far-infrared film that warms up faster, and distributes soft heat more evenly.
Adjustable dial controls heat output over time, without turning the mat on/off which disrupts growth.
Crafted with IP-67 quad-layer PVC that’s flexible, resistant to wear-and-tear, and easy to wipe clean.
Verifiable UL (E518635) & MET (E115128) certifications for electrical safety thru online directories.
Product Description
A warming seedling mat designed to improve germination success and accelerate your seeds’ growth process by emitting steady heat. The seedling mat’s steady 80-87°F (27-31°C) temperature range heats the rooting area by up to 20°F above the ambient air temperature. It uses a durable quad-layer PVC that is resistant to wear-and-tear and is easy to clean and roll for storage. Best used for seed germination and propagation in indoor settings like basements and terrariums to jumpstart the rooting stage. Also fit for homebrewing or fermenting beverages, and heating pet enclosures for reptiles.
Innovative Technology
Each mat for seedling growth is lined with an innovative far-infrared film that provides even heating distribution while producing softer warmth output than wire coils, protecting your seeds from scorching. Its connected heating controller supports this protection, featuring an adjustable dial that sets your desired heat output. Control the mat temperature over time without having to turn it on and off, which can cause the seed to rot due to extreme changes in temperature. Threshold levels include low, medium, and high.
Safety Certified
This heating mat is UL-certified (E518635), achieving safety standards for electric heating appliances and electrically heated warming pads. It also meets MET standards (certificate #E115128) for electrical appliance safety, ensuring harm-free use in indoor heating applications. These certifications are verifiable through their respective online directories under AC Infinity Inc. The heating mat is additionally rated for fire resistance and safe temperature regulation. Achieving an IP-67 rating, the heating mat is sealed along its seams to keep water and dust from seeping in. This ingress protection is extended to the 60-inch power cord, its connection specially sealed to prevent electrical damage from occurring.
A 9-inch clip-on fan engineered for longer-lasting, tailored circulation in grow space environments.
Larger brushless EC motor with carbon steel gears, dual-ball bearings, and is IP54-rated to maximize lifespan.
10 oscillation ranges can focus on targeted areas or achieve wide coverage while avoiding obstacles.
Features 10 speeds and 10 dynamic wind modes to simulate outdoor airflow for optimal plant growth.
Links with UIS controllers for WiFi app control and access to climate triggers, timers, and advance automation.
Product Description
A highly innovative clip fan designed to deliver targeted circulation and optimize each stage of your plant’s grow cycle. Access ten digital speeds plus ten dynamic wind modes for customizable airflow that varies between levels to simulate an outdoor environment. For even greater control, utilize the ten oscillation levels that deliver focused circulation to specific spots or offer the widest reach possible. This circulation fan is IP54-rated to maintain peak performance during continuous use in high humidity and temperature. It also meets ETL standards (certificate #5027708) for electrical appliance safety, ensuring secure use in air circulation applications. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to unite with the AC Infinity app over WiFi to achieve your ideal environment.
Tailored, Custom Airflow
Get unprecedented customization capabilities for complete airflow control using this grow tent clip-on fan’s 10 speed levels, 10 dynamic wind modes, and 10 oscillation settings. Uniquely tailor each stage of development for a wholly personalized growing experience. Our wide selection of dynamic modes lets you decide the maximum strength of your varying wind flow, ensuring healthier growth with reduced stress on your plants. The oscillation range offers total tent coverage, being able to avoid obstacles. With this, you can set precise circulation for any plant growth stage, from ultra-gentle breezes for germination and seedlings to a powerful airflow for vegetative and flowering.
Redesigned Motor
This clip fan features a robust EC motor specially designed in size and construction to lengthen oscillation lifespan. Its clamp is re-engineered with a compact metal build that saves space in your grow tent and uses a vise grip-like design for greater security on tent poles. Other reinforced features include a brushless motor design, resilient carbon steel gears, and dual-ball bearings for omnidirectional mounting. These components create the heaviest-duty clip fan that is long-lasting, energy-efficient, and can generate powerful circulation.
A curved micro-tip shear designed for fine trimming in tight spaces and shaping plants to improve growth.
Stainless-steel blades that stay razor-sharp through extended use, crafted with precision-ground edges.
Non-stick titanium coating repels plant residue off the blades to reduce resin build-up and jamming.
Lightweight body with ergonomic grip spring-loads handles to improve comfort and reduce hand fatigue.
Built-in safety lock keeps the shear closed to protect your hands from injury and preserve the blades.
Product Description
A curved garden trimmer designed to make fine-tuning cuts and shape plants to redirect and optimize growth. Each pruning shear uses a spring-action system that automatically pushes the handles open and primes the blades for additional cutting. This, along with its lightweight, ergonomic design, works to increase comfort in your hands and relieve hand fatigue; ideal for users with arthritis or carpal tunnel syndrome to prolong use. The micro-tip blades are crafted with stainless steel, using a titanium coating to reduce resin build-up and jamming. A sliding lock mechanism securely keeps the pruning shears closed, which provides protection for the blades and your hands.
Applications
The pruning shear is crafted for use with small plants and flowers to improve their growth process. Best used for trimming flowers, herbs, bonsai trees, vegetables, or other plants. Its bowed micro-tip blades allow you to reach between branches to cut in even the smallest of spaces. This also removes the need to awkwardly position your hand to make precision cuts. Use it in any grow setting like outdoor gardens, hydroponics builds, grow tents, and greenhouses.
A gear board designed to provide additional support for grow equipment while maximizing tent space. By using this tent wall mounting system, you can remove floor items from and declutter your grow tent. Secure your accessories and controllers along its sturdy frame and cable manage their cords out of sight through the various-sized mesh openings. The heavy-duty steel body is built to handle heavier grow devices while enduring consistent exposure to extreme environments. Simply hook the metallic legs to the base of your grow tent, then fasten the stabilizing poles for a vertical mounting structure that can be easily adjusted to ensure duct port access.
An adapter dongle designed to connect our UIS controllers to grow lights from other manufacturers. The Type-B adapter works only with grow lights with RJ11 and RJ12 connectors that use resistor dimmers; see below for compatibility list. By connecting your lighting fixture to one of our controllers, you can automate it with light cycles, scheduling, and dynamic responses to temperature and humidity. It will also join the UIS platform of smart controllers and grow equipment, all working together to create the ideal environment for your plants. Our WiFi-enabled smart controllers allow you to monitor and control your grow on your phone from anywhere while providing data charts and alert notifications via the AC Infinity app. Once your first light has connected to the controller, you can control additional RJ11 or RJ12 connector lights using that manufacturer's daisy chain method. Includes a 10-foot RJ11/12 extension cord. Compatible with our controllers with UIS connectors like CONTROLLER 69, CONTROLLER 69 WiFi and CONTROLLER 69 PRO; an additional UIS device is required to power the controller.
Designed to hang various grow equipment such as lights, fans, and filters.
Easily clip and secure your gear using the heavy-duty carabiner hooks.
Features a stainless steel locking ratchet to adjust the rope’s length.
Made of 1/8” braided polypropylene rope and zinc-plated steel hooks.
Weight Capacity: 150 lbs/pair | Rope Length: 8 Ft | Pieces Per Pack: 4
Product Description
The rope hanger is designed to hang various grow tent and ventilation equipment. You can easily push the carabiner hook to clip and secure your equipment. Then pull on the rope, which will automatically lock with the stainless steel ratchet mechanism. The rope is made of 1/8” braided polypropylene, and the hooks are constructed of zinc-plated steel. The internal gears inside the locking ratchet are all built with stainless steel parts for a long-lasting smooth operation.
Applications
Used for hanging various growing and ventilation equipment, including inline fans, carbon filters, reflectors, grow lights, and flower pots.
Four 11” UV LED bars designed for supplemental ultraviolet lighting to assist primary grow lights.
Helps improve grow light quality to draw out plant expressions by simulating the sun’s UV rays.
Enhances fruit and flowering stages by utilizing a targeted UVA spectrum of 365nm and 395nm.
Features a digital controller with ten light intensity levels and daily schedule programming.
Can magnetically mount onto your grow tent's frame or canvas using the included steel bars.
Product Description
A set of ultraviolet LED bars designed for use as supplemental lighting to enhance light quality. When optimally positioned, these UV LED light bars will induce growth characteristics in your plants during the fruit and flower grow stages. Its unibody housing and aluminum board host a row of targeted spectrum ultraviolet LEDs while also dissipating heat to extend their lifespan. Each light bar features heavy-duty construction and is IP65-rated to resist water and dust entry, capable of withstanding humid climates. Also compatible with our humidity domes for use in seed germination and propagation applications. This product is part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment.
Uniform Coverage Lighting
Magnetically mounts onto grow tent frames, bar style lighting fixtures with magnetic surfaces, and canvases when using the included steel bars. Provide even UVA coverage that supplements your primary lighting to emit a light spectrum naturally found in sunlight. Each LED light bar is built with 365nm and 395nm diodes that are formulated to draw out expressions during your plant’s fruit and flower development to improve the quality of its yields. Two bars will provide full UV coverage to 2x2, 2x4, and 3x3 spaces while four bars fully cover 4x4 and 5x5 grow spaces.
Smarter Controls
This kit includes an intuitive controller that features ten brightness intensity levels with OFF, ON, and SCHEDULE modes. The lights can also be connected to our smart UIS controllers to integrate with other grow equipment and access dynamic climate triggers, grow cycles, and app control.
Two 11” UV LED bars designed for supplemental ultraviolet lighting to assist primary grow lights.
Helps improve grow light quality to draw out plant expressions by simulating the sun’s UV rays.
Enhances fruit and flowering stages by utilizing a targeted UVA spectrum of 365nm and 395nm.
Features a digital controller with ten light intensity levels and daily schedule programming.
Can magnetically mount onto your grow tent's frame or canvas using the included steel bars.
Product Description
A set of ultraviolet LED bars designed for use as supplemental lighting to enhance light quality. When optimally positioned, these UV LED light bars will induce growth characteristics in your plants during the fruit and flower grow stages. Its unibody housing and aluminum board host a row of targeted spectrum ultraviolet LEDs while also dissipating heat to extend their lifespan. Each light bar features heavy-duty construction and is IP65-rated to resist water and dust entry, capable of withstanding humid climates. Also compatible with our humidity domes for use in seed germination and propagation applications. This product is part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment.
Uniform Coverage Lighting
Magnetically mounts onto grow tent frames, bar style lighting fixtures with magnetic surfaces, and canvases when using the included steel bars. Provide even UVA coverage that supplements your primary lighting to emit a light spectrum naturally found in sunlight. Each LED light bar is built with 365nm and 395nm diodes that are formulated to draw out expressions during your plant’s fruit and flower development to improve the quality of its yields. Two bars will provide full UV coverage to 2x2, 2x4, and 3x3 spaces while four bars fully cover 4x4 and 5x5 grow spaces.
Smarter Controls
This kit includes an intuitive controller that features ten brightness intensity levels with OFF, ON, and SCHEDULE modes. The lights can also be connected to our smart UIS controllers to integrate with other grow equipment and access dynamic climate triggers, grow cycles, and app control.
A carbon dioxide regulator designed to help create the ideal environment for plant growth by managing the output of CO2 into the air. Features a flow meter with a pressure gauge that accurately measures gas flow as well as the remaining gas levels. These measuring systems will enable you to determine the exact amounts of CO2 to release that will improve your plant’s growth rate. They are built into a durable brass construction with a solenoid valve that ensures a proper stream with no leakage. Fits into many standard tanks with threaded valves to function as a CO2 generator in grow tent or grow room settings.
A smart sensor probe designed to detect temperature and humidity conditions for AC Infinity universal controllers. Using a Swiss-made thermal-alloy head, the climate sensor uses type 316 SAE steel that can adapt to rapidly changing climate conditions. This allows it to provide pinpoint accurate temperature and humidity readings and enables you to quickly adjust your fan to your cooling or heating needs. The corded probe has an IP-44 rating, able to withstand humid conditions by resisting splashing water and dust. Comes in 20 feet in length for spot detection coverage applications such as grow tents, HVAC ductwork, tool sheds, and AV component closets.
A domed germination kit designed to promote successful plant growth and propagation by producing a high humidity environment. Included within the kit are the humidity dome, grow light bars, and the seedling mat. The transparent dome allows for optimal light saturation while offering easy observation of your plants’ progress. Adjustable vents on the dome offer complete humidity control through smooth and effortless rotating. Make further adjustments with the optional height extender, which can be applied to elevate the dome for cloning projects. The drip and seedling trays fit seamlessly to support up to 40 seedlings while catching excess water and preventing leaks in the process.
A domed germination kit designed to promote successful plant growth and propagation by producing a high humidity environment. Included within the kit are the humidity dome, grow light bars, and the seedling mat. The transparent dome allows for optimal light saturation while offering easy observation of your plants’ progress. Adjustable vents on the dome offer complete humidity control through smooth and effortless rotating. This will allow you to precisely dial in the amount of atmospheric moisture inside the propagation dome, locking in lowering water vapor levels. The drip and seedling trays fit seamlessly to support up to 72 seedlings while catching excess water and preventing leaks in the process.
Designed for ventilation applications including HVAC, dryer, grow rooms and tents.
Four layer design makes it more durable and resistant to leaks, tears, and cuts.
Steel-wire spiral structure is flexible and easy-to-install in hard to reach places.
Constructed of Aluminum and thermoplastic, tube can be shortened for various applications.
Ducting Size: 8” | Length: 25 feet | Includes two stainless steel 8" duct clamps
PRODUCT DESCRIPTION
This ducting is designed for various ventilation, circulation, and heating/cooling transfer applications. It features four-layer protection, making it more durable and resistant to leaks than single-layer designs. The internal layer is made of heavy-duty dual aluminum foil that is fire/flame resistant. Its outer layer utilizes dual PVC thermoplastic that protects the aluminum from cuts and tears while stopping leakage. Each duct tube is held together by an internal steel-wire spiral that is flexible and easy to install in hard to reach places. The ducting can be shortened by cutting the tube to fit various applications. Includes two stainless steel duct clamps.
APPLICATIONS
Primarily used with duct fan systems in various air circulation and ventilation projects including hydroponic grow rooms and tents, bathrooms and attics, heating and cooling transportation, and other installations. It is also used to cool AV equipment rooms, closets, racks, and cabinets.
Dimmable LED grow light designed with an optimized spectrum and diode positioning, to maximize plant yields.
Specially formulated full-spectrum Samsung LM301B LEDs to achieve the highest growth rates in all plant stages.
Algorithmically positioned diodes create the most uniform PAR map and the deepest canopy penetration.
Dimmer enables 0 to 100% brightness. Can connect with our smart controllers to access grow cycles, scheduling, and app.
Constructed on a unibody aluminum board and IP-65 rated for grow environments with higher humidity and heat.
PRODUCT DESCRIPTION
A full spectrum LED grow light designed with algorithmically positioned Samsung LM301B diodes to maximize plant yields. Features a proprietary driver that enables light dimming and can connect with our smart controllers. These enable pairing with additional LED light fixtures when using expansion dongles (sold separately). Built on a fanless, unibody aluminum board to dissipate heat and extend the diodes’ lifetime. All components are sealed to IP-65 standards to maintain peak performance even in a grow environment with higher temperatures and humidity. Includes a pair of metal bar hangers and rope hangers. This LED grow fixture is designed for grow tents with interior reflective Mylar lining, and used to cultivate a variety of plants, fruits, and vegetables. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment.
OPTIMIZED SPECTRUM
Each light contains an optimized ratio of Horticulture-Series Samsung LM301B white, red, and IR LEDs designed to maximize plant yields. The diodes are then algorithmically positioned within the board to provide the most uniform PAR map coverage and deepest light penetration. These features help achieve the highest growth rates in germination, vegetative, and flowering stages.
FUTURE READY CONTROLS
Features a proprietary LED driver that enables 0-100% dimming with an easy-to-use control knob that adjusts light intensity in 20% increments. The driver also contains a port that enables daisy chaining and can connect with our smart controllers to access grow cycles, scheduling, app control, and more. Join our ecosystem of controllers and grow equipment including fans and lights, all working together to achieve the optimal environment.
Dimmable LED grow light designed with an optimized spectrum and diode positioning, to maximize plant yields.
Specially formulated full-spectrum Samsung LM301B LEDs to achieve the highest growth rates in all plant stages.
Algorithmically positioned diodes create the most uniform PAR map and the deepest canopy penetration.
Dimmer enables 0 to 100% brightness. Can connect with our smart controllers to access grow cycles, scheduling, and app.
Constructed on a unibody aluminum board and IP-65 rated for grow environments with higher humidity and heat.
PRODUCT DESCRIPTION
A full spectrum LED grow light designed with algorithmically positioned Samsung LM301B diodes to maximize plant yields. Features a proprietary driver that enables light dimming and can connect with our smart controllers. These enable pairing with additional LED light fixtures when using expansion dongles (sold separately). Built on a fanless, unibody aluminum board to dissipate heat and extend the diodes’ lifetime. All components are sealed to IP-65 standards to maintain peak performance even in a grow environment with higher temperatures and humidity. Includes a pair of metal bar hangers and rope hangers. This LED grow fixture is designed for grow tents with interior reflective Mylar lining, and used to cultivate a variety of plants, fruits, and vegetables. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment.
OPTIMIZED SPECTRUM
Each light contains an optimized ratio of Horticulture-Series Samsung LM301B white, red, and IR LEDs designed to maximize plant yields. The diodes are then algorithmically positioned within the board to provide the most uniform PAR map coverage and deepest light penetration. These features help achieve the highest growth rates in germination, vegetative, and flowering stages.
FUTURE READY CONTROLS
Features a proprietary LED driver that enables 0-100% dimming with an easy-to-use control knob that adjusts light intensity in 20% increments. The driver also contains a port that enables daisy chaining and can connect with our smart controllers to access grow cycles, scheduling, app control, and more. Join our ecosystem of controllers and grow equipment including fans and lights, all working together to achieve the optimal environment.
Dimmable LED grow light designed with an optimized spectrum and diode positioning, to maximize plant yields.
Specially formulated full-spectrum Samsung LM301B LEDs to achieve the highest growth rates in all plant stages.
Algorithmically positioned diodes create the most uniform PAR map and the deepest canopy penetration.
Dimmer enables 0 to 100% brightness. Can connect with our smart controllers to access grow cycles, scheduling, and app.
Constructed on a unibody aluminum board and IP-65 rated for grow environments with higher humidity and heat.
PRODUCT DESCRIPTION
A full spectrum LED grow light designed with algorithmically positioned Samsung LM301B diodes to maximize plant yields. Features a proprietary driver that enables light dimming and can connect with our smart controllers. These enable pairing with additional LED light fixtures when using expansion dongles (sold separately). Built on a fanless, unibody aluminum board to dissipate heat and extend the diodes’ lifetime. All components are sealed to IP-65 standards to maintain peak performance even in a grow environment with higher temperatures and humidity. Includes a pair of metal bar hangers and rope hangers. This LED grow fixture is designed for grow tents with interior reflective Mylar lining, and used to cultivate a variety of plants, fruits, and vegetables. This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment.
OPTIMIZED SPECTRUM
Each light contains an optimized ratio of Horticulture-Series Samsung LM301B white, red, and IR LEDs designed to maximize plant yields. The diodes are then algorithmically positioned within the board to provide the most uniform PAR map coverage and deepest light penetration. These features help achieve the highest growth rates in germination, vegetative, and flowering stages.
FUTURE READY CONTROLS
Features a proprietary LED driver that enables 0-100% dimming with an easy-to-use control knob that adjusts light intensity in 20% increments. The driver also contains a port that enables daisy chaining and can connect with our smart controllers to access grow cycles, scheduling, app control, and more. Join our ecosystem of controllers and grow equipment including fans and lights, all working together to achieve the optimal environment.
A mesh netting rack designed to preserve plant material by promoting even drying and curing.
Durable polyester mesh with steel wireframe construction can support larger and heavier loads.
Collapsible design with zippered chambers makes storage easy and keeps your drying goods undisturbed.
Ideal for drying large quantities of plant material like herbs, buds, fruits, flowers, and seeds.
4 Tiers | 18 in. Diameter | Fits 2x2 or Larger Grow Tents | Includes Hanging Hook & Carrying Bag
PRODUCT DESCRIPTION
A grow drying rack designed for drying and curing to preserve plant material such as flowers, buds, and seeds. Each multi-tiered plant hanger is constructed of a flexible steel wireframe enveloped by a non-toxic polyester mesh. This frame can support larger and heavier loads, while its flexibility enables collapsing to store and move the drying rack as needed. Zippered 6.75” high chambers organize and encase your drying material to keep them undisturbed and ensure proper drying. The built-in Velcro loop allows for versatile placement, capable of hanging almost anywhere without the need for extra hooks.
APPLICATIONS
This drying and curing rack is made to fit in small spaces like grow tents and closets but can also be hung in outdoor settings or other open spaces. While able to dry clothes and fish, the mesh drying rack is primarily used to dry and cure plant material such as herbs, buds, fruits, flowers, seeds, and vegetables.
Features Samsung LM301H EVO LEDs each rated at 3.14 µmol/J PPE, the highest efficiency of LM301B, LM301H, and Bridgelux 3030 chips.
Programmed with schedule controls, sunrise/sunset dimming, and 10 brightness levels; UIS™ platform-compatible for WiFi app control.
Bar-style fixture with algorithmically spaced diodes optimized for even coverage, deep canopy penetration, and hotspot reduction.
Passive cooling LED driver is removable to balance heat dissipation; also supports daisy-chaining with up to 80 grow lights.
5 x 5 ft. Veg. Coverage | 4 x 4 ft. Flower Coverage | Samsung LM301H EVO Chips | 1074 Diodes | 500W | 1991 PPFD | ETL Cert. 5021417
PRODUCT DESCRIPTION
An indoor plant grow light designed for grow tents and large grow spaces to improve your plant's growth rate and its yields. Utilizes Samsung LM301H EVO diodes that are algorithmically spaced on a bar-style form factor to evenly distribute lighting coverage while diminishing hotspots. Its modular design enables you to remove the driver to remotely mount it away from this fixture and balance heat dissipation. This heat dissipation is supported by its steel and aluminum build, which enables magnetic mounting and is IP-65-rated to withstand humid environments. This grow light meets ETL standards (certificate #5021417) for electrical appliance safety, ensuring secure use in lighting applications. The included smart controller features schedule programming and daisy-chain support to connect more bar LED grow lights in a linear arrangement by using splitter dongles (sold separately). This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment.
INDUSTRY-LEADING LED CHIPS
Each IONFRAME light features genuine Samsung LM301H EVO diodes, the latest in horticulture lighting technology that emits intense brightness at greater efficiency. This performance is superior to leading Samsung LM301H and LM301B LEDs, as well as Bridgelux 3030, and other previous-generation LEDs. EVO diodes help improve plant growth by emitting greater light quality and more light output per diode, with a higher blue spectrum and greater efficiency when compared to non-EVO diodes. The IONFRAME EVO is supported by an array of (6) 395 nm UV diodes, (54) 660 nm and (6) 730 nm OSRAM red diodes to complete its full spectrum light output.
SCHEDULE AND BRIGHTNESS CONTROLS
The included schedule controller can automatically adjust light based on the time of day. It features 10 light intensity levels and a scheduling mode that will cyclically activate this grow light. Customize this daily cycling with an innovative sunrise and sunset setting that gradually brightens and dims the lighting to accurately replicate the sun's movement. Use this grow light with an advance UIS controller like CONTROLLER 69 PRO to fully automate it by integrating it into the UIS platform. This will enable further access to remote control over WiFi and advance programming like automation and grow recipes when connecting to the AC Infinity app.
Features Samsung LM301H EVO LEDs each rated at 3.14 µmol/J PPE, the highest efficiency of LM301B, LM301H, and Bridgelux 3030 chips.
Programmed with schedule controls, sunrise/sunset dimming, and 10 brightness levels; UIS™ platform-compatible for WiFi app control.
Bar-style fixture with algorithmically spaced diodes optimized for even coverage, deep canopy penetration, and hotspot reduction.
Passive cooling LED driver is removable to balance heat dissipation; also supports daisy-chaining with up to 80 grow lights.
4 x 4 ft. Veg. Coverage | 3 x 3 ft. Flower Coverage | Samsung LM301H EVO Chips | 896 Diodes | 300W | 1819 PPFD | ETL Cert. 5021417
PRODUCT DESCRIPTION
An indoor plant grow light designed for grow tents and large grow spaces to improve your plant's growth rate and its yields. Utilizes Samsung LM301H EVO diodes that are algorithmically spaced on a bar-style form factor to evenly distribute lighting coverage while diminishing hotspots. Its modular design enables you to remove the driver to remotely mount it away from this fixture and balance heat dissipation. This heat dissipation is supported by its steel and aluminum build, which enables magnetic mounting and is IP-65-rated to withstand humid environments. This grow light meets ETL standards (certificate #5021417) for electrical appliance safety, ensuring secure use in lighting applications. The included smart controller features schedule programming and daisy-chain support to connect more bar LED grow lights in a linear arrangement by using splitter dongles (sold separately). This product is a part of the UIS™ platform of grow devices and smart controllers, designed to integrate with each other to achieve your ideal environment.
INDUSTRY-LEADING LED CHIPS
Each IONFRAME light features genuine Samsung LM301H EVO diodes, the latest in horticulture lighting technology that emits intense brightness at greater efficiency. This performance is superior to leading Samsung LM301H and LM301B LEDs, as well as Bridgelux 3030, and other previous-generation LEDs. EVO diodes help improve plant growth by emitting greater light quality and more light output per diode, with a higher blue spectrum and greater efficiency when compared to non-EVO diodes. The IONFRAME EVO is supported by an array of (4) 395 nm UV diodes, (28) 660 nm and (4) 730 nm OSRAM red diodes to complete its full spectrum light output.
SCHEDULE AND BRIGHTNESS CONTROLS
The included schedule controller can automatically adjust light based on the time of day. It features 10 light intensity levels and a scheduling mode that will cyclically activate this grow light. Customize this daily cycling with an innovative sunrise and sunset setting that gradually brightens and dims the lighting to accurately replicate the sun's movement. Use this grow light with an advance UIS controller like CONTROLLER 69 PRO to fully automate it by integrating it into the UIS platform. This will enable further access to remote control over WiFi and advance programming like automation and grow recipes when connecting to the AC Infinity app.
