一款可拆卸、防水的地面衬垫,专为 Mars Hydro 4' x 4' 种植帐设计。它可收集液体洒漏和流失物,防止其到达帐篷底部,清洁时可将其取出。
尺寸:4' x 4',适用于 Mars Hydro 4' x 4' 种植帐(48" x 48" x 80",120 x 120 x 200 cm)
Mars Hydro 还将其列为适用于其 8' x 4' 和 8' x 8' 帐篷的配件
外部:1680D 牛津布
内部:高反射 Mylar 材质
防水,保护帐篷免受液体洒漏和积水影响
可拆卸,方便清洁
包装盒内: 1 个 4' x 4' 帐篷底托盘。
This is GrowPros' double-tier rolling rack frame set up with only the lower tier in use, so you can run single-tier today and add the upper level later without replacing the rack. It includes trays, starts at 8 ft long and grows in 4 ft increments, and runs on separately purchased floor tracks. Stainless construction matches the rest of the GrowPros rack line. Priced per square foot of rack: set the quantity to your total rack area in square feet (a 4 x 8 ft rack is 32 sq ft).
This single-tier rolling bench rides on heavy-duty rollers along a floor-mounted V-track, so tables move smoothly wall to wall and aisles open only where you need them. Stainless steel legs carry continuous extra-thick ABS trays, rated up to 26 lb per sq ft and 2,000 lb per bench. Benches are built to order 4 ft wide in lengths from 8 to 80 ft. Priced per square foot of bench: set the quantity to your total bench area in square feet (a 4 x 8 ft bench is 32 sq ft).
This single-tier rolling bench uses a hand-crank wheel to slide each table up to 18 in side to side, turning fixed aisles into growing space. The stainless steel and aluminum frame resists rust in wet rooms, and it comes with ABS tray inserts and trellis supports. Benches are built to order in 4 ft or 5 ft widths and lengths from 8 ft up, and each bench handles up to 2,000 lb. Priced per square foot of bench: set the quantity to your total bench area in square feet (a 4 x 8 ft bench is 32 sq ft).
This multi-tier rolling rack stacks two growing levels on one tracked base, roughly doubling canopy in the same footprint compared with a single-tier bench. It is built from stainless steel with sloped ABS trays for easy drainage, and tier heights adjust for different crops and stages. Racks are made to order in 4 ft or 5 ft widths and 8 to 80 ft lengths, with optional catwalks and air circulation for the upper level. Priced per square foot of rack footprint: set the quantity to your total rack area in square feet (a 4 x 8 ft rack is 32 sq ft).
This add-on turns a GrowPros double-tier rolling rack into a three-level system, adding another full growing tier on the same tracked footprint. Each level is rated for up to 3,000 lb, and the stainless frame and ABS trays match the base rack. It is quoted per square foot to match your rack's width and length: set the quantity to your rack area in square feet (a 4 x 8 ft rack is 32 sq ft).
These 8 ft side tracks (sold as a pair) are the stainless steel rails that support GrowPros catwalk decks along multi-tier racks. Anti-dislodge tabs lock them into the rack uprights and hold the decks in place, and each rail is rated to 800 lb.
These 4 ft side tracks (sold as a pair) are the stainless steel rails that carry GrowPros catwalk decks between rack uprights. Anti-dislodge tabs anchor the rails in the uprights and hold the decking in place, and the rails can be repositioned as racks change. Each rail is rated to 800 lb.
This 4 ft catwalk deck creates a walkable platform between GrowPros multi-tier racks for working the upper canopy. Each marine-grade aluminum deck measures 20.5 x 47.2 in and weighs just 12.8 lb, yet supports up to 400 lb. Decks set into the side tracks without tools, so one person can install them.
This stainless steel tube ladder hooks onto the GrowPros catwalk to give safe access to the upper tiers of multi-tier rolling racks. Ladders are offered from 3 to 10 rungs to reach deck heights of 30 to 120 in above the floor, and three-position hook plates set a comfortable climbing angle. It is light enough to move from aisle to aisle.
This 300 mL adhesive is used to bond and seal GrowPros bench tray sections during tray installation. Keep a tube on hand when assembling or repairing tray runs on rolling benches.
This white 4x8 bench tray (tray only) is molded from food-safe, UV-resistant ABS with built-in drainage channels that keep water from pooling. It fits GrowPros rolling benches and standard tray stands, and works with flood-and-drain, drip and ebb-and-flow setups. The crack-resistant material holds plants, media and solution without warping.
These are 2 ft legs for a 4x8 GrowPros single-tier rolling bench, for replacing or adding leg sets on an existing bench. They match the bench's stainless steel frame.
This stainless steel floor track section guides GrowPros tracked rolling benches and multi-tier racks so they glide in a straight line under full load. Each section is 7 ft 10 in long and mounts to the floor, and sections join end to end for any room length. It is designed to fit GrowPros sliding racks.
This stainless steel slide handle gives staff a safe, comfortable grip for pushing GrowPros V-track rolling benches along their track. Rounded corners prevent snags and scrapes, and the rust-resistant build stands up to humid rooms. It is sized to move fully loaded benches.