Um forro de chão removível e impermeável, dimensionado para as tendas de cultivo 4' x 4' da Mars Hydro. Ele recolhe derramamentos e escoamentos antes que atinjam o chão da tenda e pode ser removido para limpeza.
Tamanho: 4' x 4', para tendas de cultivo Mars Hydro 4' x 4' (48" x 48" x 80", 120 x 120 x 200 cm)
A Mars Hydro também o lista para suas tendas 8' x 4' e 8' x 8'
Exterior: tecido Oxford 1680D
Interior: Mylar altamente reflexivo
Impermeável, para proteger a tenda de derramamentos e inundações
Removível para facilitar a limpeza
Na caixa: 1 bandeja de chão para tenda 4' x 4'.
A Grow Tent Pro Mars Hydro de 2' x 2' x 5,2' é uma tenda compacta feita de tecido 2000D à prova de luz de alta qualidade, com revestimento de Mylar altamente reflexivo e uma janela de observação extra grande para que você possa verificar as plantas sem abri-la. Ela comporta uma ou duas plantas, e a estrutura de metal suporta até 120 lb.
Tamanho: 24" x 24" x 63" (60 x 60 x 160 cm)
Tecido: exterior em Oxford 2000D, interior em Mylar altamente reflexivo
Estrutura: metal, suporta até 120 lb
Acesso: 1 porta frontal e 1 janela de observação frontal extra grande
Ventilação: 2 aberturas de 6" e 1 de 8", além de uma janela de tela de 10" x 14"
Capacidade: 1–2 plantas em sacos de cultivo de 5 galões
Configuração sugerida: LED Mars Hydro TS600 ou TS1000 com um exaustor inline de 4"
Barras de alta resistência projetadas não apenas para evitar que as paredes da tenda se curvem para dentro, mas também para montar acessórios de cultivo.
Construção rígida em aço, projetada para fixar produtos de cultivo com segurança e resistir a um uso intenso.
Inclui grampos de suporte adicionais que dobram a capacidade de carga da barra para montar itens mais pesados, como prateleiras.
Almofadas antiderrapantes e tiras de velcro mantêm as barras firmemente no lugar, permitindo um ajuste de altura sem esforço.
Adequadas para tendas de cultivo 5x5, suportam iluminação suplementar, ventiladores de mola, treliças e suportes de secagem.
Descrição do Produto
Um conjunto de barras de acessórios para tendas de cultivo projetado para oferecer maior suporte aos equipamentos e maximizar o espaço interno. Fabricadas em aço altamente resistente para formar múltiplos sistemas de suporte, as barras CFM podem ser organizadas para sustentar acessórios de cultivo sem ceder ou fazer com que as paredes se curvem. Os grampos de suporte duráveis dobram a capacidade de carga potencial, proporcionando resistência reforçada para sustentar produtos adicionais ou mais pesados. Fixe firmemente as barras de montagem com almofadas adesivas antiderrapantes e tiras de velcro, para facilitar a instalação e o ajuste de altura.
Aplicações
Estas barras de montagem são compatíveis com estruturas de tendas de cultivo de qualquer tamanho e suportam acessórios como ventiladores de mola, redes de treliça e suportes de secagem. Podem sustentar equipamentos adicionais ou maiores quando utilizadas com os grampos de suporte incluídos. Luzes suplementares podem ser fixadas magneticamente nestas barras e organizadas como iluminação lateral entre as copas.
DARK ROOM versão 3.0O DARK ROOM: MAIS À PROVA DE LUZ, MAIS EQUIPADO, MAIS ROBUSTO!Especialmente revestido com tecido de Mylar com efeito martelado 95% reflexivo (210D), para aumentar a intensidade da luz e melhorar a distribuição da luz. À prova de luz, à prova d'água e pré-equipado para exaustão e ventilação, os armários vêm com barras de suporte para lâmpadas e filtros de carbono.Linha de produtos disponível em diferentes tamanhos, do DR60 (60x60x170 cm) ao DR300 (300x300x235 cm).Múltiplos bicos e janelas para todas as configurações possíveisConjunto completo de acessórios incluído
As estufas de cultivo Mars Hydro utilizam lona grossa 1680D, hastes de aço resistentes e zíperes SBS, criando um ambiente de trabalho não tóxico para humanos, ao mesmo tempo em que utilizam materiais de alta qualidade e retêm toda a luz. Janela de observação de fácil visualização, bandeja de piso removível e uma bolsa de ferramentas para ajudar a cultivar as plantas em ambientes internos com mais praticidade.
This is GrowPros' double-tier rolling rack frame set up with only the lower tier in use, so you can run single-tier today and add the upper level later without replacing the rack. It includes trays, starts at 8 ft long and grows in 4 ft increments, and runs on separately purchased floor tracks. Stainless construction matches the rest of the GrowPros rack line. Priced per square foot of rack: set the quantity to your total rack area in square feet (a 4 x 8 ft rack is 32 sq ft).
This single-tier rolling bench rides on heavy-duty rollers along a floor-mounted V-track, so tables move smoothly wall to wall and aisles open only where you need them. Stainless steel legs carry continuous extra-thick ABS trays, rated up to 26 lb per sq ft and 2,000 lb per bench. Benches are built to order 4 ft wide in lengths from 8 to 80 ft. Priced per square foot of bench: set the quantity to your total bench area in square feet (a 4 x 8 ft bench is 32 sq ft).
This single-tier rolling bench uses a hand-crank wheel to slide each table up to 18 in side to side, turning fixed aisles into growing space. The stainless steel and aluminum frame resists rust in wet rooms, and it comes with ABS tray inserts and trellis supports. Benches are built to order in 4 ft or 5 ft widths and lengths from 8 ft up, and each bench handles up to 2,000 lb. Priced per square foot of bench: set the quantity to your total bench area in square feet (a 4 x 8 ft bench is 32 sq ft).
This multi-tier rolling rack stacks two growing levels on one tracked base, roughly doubling canopy in the same footprint compared with a single-tier bench. It is built from stainless steel with sloped ABS trays for easy drainage, and tier heights adjust for different crops and stages. Racks are made to order in 4 ft or 5 ft widths and 8 to 80 ft lengths, with optional catwalks and air circulation for the upper level. Priced per square foot of rack footprint: set the quantity to your total rack area in square feet (a 4 x 8 ft rack is 32 sq ft).
This add-on turns a GrowPros double-tier rolling rack into a three-level system, adding another full growing tier on the same tracked footprint. Each level is rated for up to 3,000 lb, and the stainless frame and ABS trays match the base rack. It is quoted per square foot to match your rack's width and length: set the quantity to your rack area in square feet (a 4 x 8 ft rack is 32 sq ft).
These 8 ft side tracks (sold as a pair) are the stainless steel rails that support GrowPros catwalk decks along multi-tier racks. Anti-dislodge tabs lock them into the rack uprights and hold the decks in place, and each rail is rated to 800 lb.
These 4 ft side tracks (sold as a pair) are the stainless steel rails that carry GrowPros catwalk decks between rack uprights. Anti-dislodge tabs anchor the rails in the uprights and hold the decking in place, and the rails can be repositioned as racks change. Each rail is rated to 800 lb.
This 4 ft catwalk deck creates a walkable platform between GrowPros multi-tier racks for working the upper canopy. Each marine-grade aluminum deck measures 20.5 x 47.2 in and weighs just 12.8 lb, yet supports up to 400 lb. Decks set into the side tracks without tools, so one person can install them.
This stainless steel tube ladder hooks onto the GrowPros catwalk to give safe access to the upper tiers of multi-tier rolling racks. Ladders are offered from 3 to 10 rungs to reach deck heights of 30 to 120 in above the floor, and three-position hook plates set a comfortable climbing angle. It is light enough to move from aisle to aisle.
This 300 mL adhesive is used to bond and seal GrowPros bench tray sections during tray installation. Keep a tube on hand when assembling or repairing tray runs on rolling benches.
This white 4x8 bench tray (tray only) is molded from food-safe, UV-resistant ABS with built-in drainage channels that keep water from pooling. It fits GrowPros rolling benches and standard tray stands, and works with flood-and-drain, drip and ebb-and-flow setups. The crack-resistant material holds plants, media and solution without warping.
These are 2 ft legs for a 4x8 GrowPros single-tier rolling bench, for replacing or adding leg sets on an existing bench. They match the bench's stainless steel frame.
This stainless steel floor track section guides GrowPros tracked rolling benches and multi-tier racks so they glide in a straight line under full load. Each section is 7 ft 10 in long and mounts to the floor, and sections join end to end for any room length. It is designed to fit GrowPros sliding racks.
This stainless steel slide handle gives staff a safe, comfortable grip for pushing GrowPros V-track rolling benches along their track. Rounded corners prevent snags and scrapes, and the rust-resistant build stands up to humid rooms. It is sized to move fully loaded benches.
Projetado para ser encaixado em nosso sistema de ABA FLANGE, leva menos de 5 segundos para ser montado sem a necessidade de ferramentas. Use-o em combinação com o nosso filtro DF16 para uma montagem ideal! Este produto inclui funções de controle de temperatura (T°, velocidade máxima/mínima do exaustor) e 2 sensores térmicos (embutidos ou externos), dependendo do tamanho do seu espaço de cultivo.
200 cm de comprimento Funciona bem com (DR240&DR300) Borracha em ambas as extremidades Usado para reforçar sua tenda de cultivo Permite que as tendas suportem mais peso