Double Black Diamond v2 LTC-LED Ag Light LEDs DE ALTO DESEMPENHO 48 Área de 4 X 4 pés Total de lúmens 11810 lm Temp. de cor / IRC 5500/73 K/IRC Vida útil do LED 70-100 mil horas. THD @ 120V 5 % Potência elétrica de entrada do SISTEMA 115 W Tensão 110-240 V Corrente de entrada @120V 0,89 A Eficácia 102 lm / W DESIGN Largura 17,5 pol Comprimento 17,3 pol Altura 5,13 pol Peso 13 lbs Moldado sobreposto (UL) Cabo de alimentação 6 pés Garantia (Fabricante) 5 anos
The AG140 is a slim 140-watt LED bar made to light the lower canopy that overhead fixtures can't reach. This full-spectrum (3K full phase) version is rated at about 420 µmol/s and 3.0 µmol/J on 120-277V input, with 0-10V dimming. Its IP66 housing stands up to foliar sprays and irrigation, and bars chain power and data through a single connection. Power cords, jumpers and stands are sold separately.
The Griffin full-spectrum bar is a modular LED bar you can mount on Unistrut and combine with other Griffin bars to build a custom fixture. Each bar is switchable to 100W, 120W or 150W, blends 437.5nm blue, full-spectrum white and 660nm deep red, and reaches about 3.1 umol/J. A single push-lock connection carries both power and 0-10V data on 120-277V, and up to 8 bars chain on 120V (16 on 240V, 18 on 277V).
The PhytoMAX-4 2S is Black Dog LED's 125-watt full-spectrum fixture, putting out 266 µmol/s of photon flux from 280 to 800 nm, including 8 µmol/s of UV and 20 µmol/s of infrared. It dims from 15 to 100% on 0-10V, and it comes in two versions: the SP with an IEC power cord rated 100-250V, or the SC with a locking, water-tight cord rated 100-277V, which is the one to choose for greenhouse use. Pick the plug that matches your outlet. A pair of V-hooks and ratcheting rope hangers come with every light.
Power draw: 125 W (1.04 A at 120V)
Photon flux (280-800 nm): 266 µmol/s
PAR (400-700 nm): 238 µmol/s
UV (280-400 nm): 8 µmol/s; IR (700-800 nm): 20 µmol/s
LEDs: 56
Dimming: 0-10V, 15-100%
Input: SP 100-250V, SC 100-277V, 50/60 Hz
Fixture size: 8.5" x 8.5" x 4.5" (22 x 22 x 11 cm)
Fixture weight: 9 lb
Heat output: 426 BTU/hr
Fan life: over 70,000 hours
Warranty: 5 years
The PhytoMAX-4 4S is Black Dog LED's 250-watt full-spectrum fixture, putting out 531 µmol/s of photon flux from 280 to 800 nm, including 16 µmol/s of UV and 40 µmol/s of infrared. It dims from 15 to 100% on 0-10V, and it comes in two versions: the SP with an IEC power cord rated 100-250V, or the SC with a locking, water-tight cord rated 100-277V, which is the one to choose for greenhouse use. Pick the plug that matches your outlet. A pair of V-hooks and ratcheting rope hangers come with every light.
Power draw: 250 W (2.08 A at 120V)
Photon flux (280-800 nm): 531 µmol/s
PAR (400-700 nm): 476 µmol/s
UV (280-400 nm): 16 µmol/s; IR (700-800 nm): 40 µmol/s
LEDs: 112
Dimming: 0-10V, 15-100%
Input: SP 100-250V, SC 100-277V, 50/60 Hz
Fixture size: 15" x 15" x 4.5" (37 x 37 x 11 cm)
Fixture weight: 24 lb
Heat output: 853 BTU/hr
Fan life: over 70,000 hours
Warranty: 5 years
The UCL Model 2 is a 4 ft, 125W under-canopy LED bar with an 80% deep-red spectrum blended with full-spectrum white. At about 414 umol/s and 3.31 umol/J it is one of the most efficient bars in the line, and it is IP65, DLC and ETL listed. Power and data share one waterproof cord for easy chaining (8 per circuit at 120V, 18 at 277V); a controller is needed to turn it on.
The UCL Model 1 is a 4 ft, 125W full-spectrum plus far-red LED bar made to light the lower canopy from below. It puts out about 362 umol/s, is IP65 and damp rated, and is DLC and ETL listed. Power and data run through one waterproof cord, so bars chain end to end (8 per circuit at 120V, up to 18 at 277V); a controller is needed to turn it on.
The 8 ft UCL Model 5 is a 250W under-canopy LED bar with a built-in aluminum air tube that doubles as a ventilation line for the lower canopy. Bars connect end to end with rubber duct connectors and are fed by the GrowPros ACS blower or a compatible inline fan. It carries an IP65 rating and runs on 120-277V, with up to 4 bars per chain at 120V (8 at 277V).
The 8 ft UCL Model 1 is a 250W full-spectrum plus far-red LED bar for lighting the lower canopy along a full bench length. It delivers about 719 umol/s, is IP65 and damp rated, and is DLC and ETL listed. One waterproof cord carries power and data, with up to 4 bars per chain at 120V (9 at 277V); a controller is needed to turn it on.
The UCL Model 4 is a 4 ft, 150W dual-channel under-canopy bar pairing a 125W 80% red plus white channel with a separate 25W 730nm far-red channel. Independent dimming lets you add or pull far red without changing the main output, at about 450 umol/s and 3.0 umol/J. It is IP65, damp rated and DLC/ETL listed, chaining up to 8 bars at 120V.
The UCL Model 3 is a 4 ft, 150W dual-channel under-canopy bar: one 75W channel blends UVA, blue and 5000K white, and the other 75W channel blends deep red, far red and 3000K white. Each channel dims on its own, so you can shift the lower-canopy spectrum as the crop develops, at about 450 umol/s and 3.0 umol/J. It is IP65, damp rated and DLC/ETL listed, with up to 8 bars per chain at 120V.
The UCL Model 5 is a 4 ft, 125W under-canopy LED bar with a built-in aluminum air tube, so it lights and ventilates the lower canopy at the same time. Bars join end to end with rubber duct connectors to form one airflow path fed by the GrowPros ACS blower or another inline fan. It delivers about 405 umol/s at 3.24 umol/J with an 80% deep red plus full-spectrum mix, and is IP65 rated.
The 8 ft UCL Model 2 is a 250W under-canopy LED bar with an 80% deep-red spectrum blended with full-spectrum white, sized to run the length of a bench. It produces about 831 umol/s at 3.32 umol/J, with a 120-degree beam, IP65 rating and DLC/ETL listing. One waterproof cord carries power and data (4 bars per chain at 120V, 9 at 277V); a controller is needed to turn it on.
The PFS Series kit is four slim 40-watt LED bars (160 watts total) with the GC-3K full phase spectrum, suited to smaller rooms, tents or shelving. Each 47.2-inch bar is rated at 100 µmol/s and 2.5 µmol/J, runs fanless, and is IP65 rated and ETL listed. The kit includes a four-in-one power cable, an 8 ft 120V cord, a 120V/240V plug adapter and mounting hardware for surface or pendant installs.
The AG-250 is a 250-watt modular LED bar that can fill a 4x4 frame, run in single-file strut lines, or work as under-canopy lighting. It uses a 3K spectrum, is rated at 3.0 µmol/J, and has an IP66 housing that handles sprays and irrigation. Bars share power and data through a single connection; cords and accessories are sold separately.
This is the red-enhanced AG140 under-canopy bar in its 277-480V version for high-voltage commercial circuits. It draws 140 watts and is rated at about 455 µmol/s and 3.25 µmol/J, with 0-10V dimming and an IP66 housing that shrugs off sprays and irrigation. Single-connection power and data chaining keeps rows tidy; cords and jumpers are sold separately.
Built for commercial rooms wired for higher voltage, this AG140 under-canopy bar runs on 277-480V. It's the 140-watt full-spectrum (3K full phase) model, rated at about 420 µmol/s and 3.0 µmol/J, with 0-10V dimming and an IP66 housing. Bars link power and data through a single connection, and cords and jumpers are sold separately so you can match your supply voltage.
This AG140 under-canopy bar uses a red-enhanced spectrum to add extra output low in the canopy during flowering. It draws 140 watts and is rated at about 455 µmol/s and 3.25 µmol/J on 120-277V input, with 0-10V dimming. The IP66 housing handles sprays and irrigation, and single-connection power and data chaining keeps long rows simple. Power cords, jumpers and stands are sold separately.
Deixe seu cultivo em estado IMPECÁVEL com o MINT LED! Recheado de recursos para manter sua sala de cultivo e sua conta de luz no melhor nível, o MINT LED 400 apresenta uma gama completa de diodos criando um verdadeiro espectro completo que suas plantas vão adorar! O controle remoto fácil de usar, bem como os controles do refletor, dão a você um controle real do que suas plantas precisam! Construído com 3 canais personalizáveis para iluminação suplementar de floração, vegetativo e espectro completo. Imite as mudanças sazonais reais de iluminação com o MINT LED 400! Diodos perfeitamente espaçados alcançam a melhor área de cobertura possível e o UV e IR fornecidos pelo refletor criam uma planta bem desenvolvida! O refletor MINT LED é frio ao toque e consome apenas 220 watts, permitindo que você substitua qualquer refletor existente de 400 watts, tudo isso enquanto economiza dinheiro! À medida que os LEDs abrem caminho para o futuro da jardinagem, certifique-se de deixar sua sala de cultivo em estado IMPECÁVEL! 3,68 AMPS
A California LightWorks SolarSystem 275 é a luminária compacta da linha SolarSystem: um LED de 200 watts, fabricado nos Estados Unidos, com espectro programável para uma área de floração de 3' x 3' ou de até 5' x 5' para o crescimento vegetativo. Use-a sozinha ou conecte-a em série com outras luminárias SolarSystem.
Potência: 0–200 W, 90–277 V, 50–60 Hz
PPF: 530 µmol/s
Cobertura: floração de 3' x 3', vegetativo de até 5' x 5'
Espectro programável com dimerização de 2 canais, 0–100%
Funciona com o Controlador SolarSystem, vendido separadamente (o canal branco não tem efeito neste modelo)
Luminária: 8,5" x 8,5" x 4", 7 lb
Saída de calor de 640 BTU · Cabo de alimentação de 6 pés, 120 V ou 240 V (escolha acima)
Listada UL e CE · Fabricada nos EUA
Garantia de 5 anos da California LightWorks
O ThinkGrow ICL-120 é um refletor LED para uso sob a copa, com driver integrado de 120 watts e feixe de 120° que atinge a parte inferior da planta, onde as luzes superiores não alcançam. Este kit contém 2 refletores, cada um com um único canal de espectro completo atrás de uma cobertura selada com classificação IP66.
2 refletores ICL-120, 120 W cada (240 W no total), drivers integrados, detecção automática de 100–277 V
PPF: mais de 348 µmol/s por refletor · Eficiência: mais de 2,9 µmol/J
Ângulo do feixe: 120° · canal único de espectro completo
IP66, com cobertura selada sobre os diodos
Fator de potência ≥ 90% · temperatura de operação de -4 a 104°F
Compatível com suportes verticais ThinkGrow TSD-3 (vendidos separadamente; 2 suportes por refletor)
Vida útil L90 superior a 54.000 horas
Garantia ThinkGrow de 5 anos
A ThinkGrow ICL-150 é uma barra de LED com driver de 120 watts integrado e um amplo ângulo de abertura de 150°, podendo ser usada como luz superior, lateral ou sob a cobertura. Quatro canais de espectro (espectro completo, vermelho profundo, vermelho distante e UV) ficam atrás de uma cobertura selada com classificação IP66, adequada para salas de cultivo densas e úmidas.
Potência de entrada: 120 W (driver integrado), bivolt automático de 100–277 V
PPF: mais de 360 µmol/s · Eficiência: mais de 3,0 µmol/J
Ângulo de abertura: 150° · uso como luz superior, lateral ou sob a cobertura
Espectro: espectro completo, vermelho profundo, vermelho distante e UV
IP66, com cobertura selada sobre os diodos
Fator de potência ≥ 90% · temperatura de operação de 32–104°F
Pendure-a, fixe-a em um perfil Unistrut de 1-5/8" com parafusos 1/4-20 ou coloque-a em suportes ThinkGrow TSD-3 (vendidos separadamente)
Conexão em série de luminária para luminária · vida útil L90 superior a 54.000 horas
Garantia ThinkGrow de 5 anos
O Photontek VF120W é a versão mais potente do VF90W: um painel de LED fino de 4' x 2' para a propagação de mudas, estacas e clones, e para outras culturas que exigem baixa luminosidade. Ele pode ser fixado em estruturas de fazendas verticais ou pendurado em suportes de iluminação, e é alimentado pelo driver VF 650W (vendido separadamente), que fornece energia para até cinco luminárias VF120W.
Consumo de energia: 130 W ±5% (1,21 A a 120 V); 120–277 V por meio do driver VF 650W
PPF: 308 µmol/s · Eficiência: 2,4 µmol/J
Dimensões: 4' x 2' · instalar a 6"–16" acima das plantas
Diodos: branco 4000 K e branco quente 3000 K; distribuição de luz de 120°
Luminária: 47,5" x 20,5" x 0,8", resfriamento passivo
Dimerizável por meio do driver VF 650W com um dimmer 0–10 V, o Controlador Digital Photontek ou um controlador universal 0–10 V
IP65 · Certificação CSA, FCC e IC · L90 > 60.000 horas · Garantia Photontek de 3 anos
Na caixa: Luminária VF120W, 8 abraçadeiras de aço inoxidável, manual. Requer o driver VF 650W (vendido separadamente).
O Photontek VF90W é um painel LED fino de 4' x 2' para propagação de mudas, estacas e clones, e para outras culturas que exigem baixa luminosidade. Ele pode ser fixado diretamente em estruturas de fazendas verticais ou pendurado em suportes de iluminação, e é alimentado pelo driver VF 650W (vendido separadamente), que fornece energia para até sete luminárias VF90W.
Consumo de energia: 103 W ±5% (0,94 A em 120 V); 120–277 V por meio do driver VF 650W
PPF: 244 µmol/s · Eficiência: 2,4 µmol/J
Dimensões: 4' x 2' · instalar a 6"–16" acima das plantas
Diodos: branco 4000 K e branco quente 3000 K; distribuição de luz de 120°
Luminária: 47,5" x 20,5" x 0,8", resfriamento passivo
Dimerizável por meio do driver VF 650W com um dimmer 0–10 V, o Controlador Digital Photontek ou um controlador universal 0–10 V
IP65 · Certificação CSA, FCC e IC · L90 > 60.000 horas · Garantia Photontek de 3 anos
Na caixa: Luminária VF90W, 8 abraçadeiras de aço inoxidável, manual. Requer o driver VF 650W (vendido separadamente).
A linha de tendas. Potência de LED suficiente para espaços de 2x2 a 3x3, e a escolha mais comum para cultivadores domésticos que cuidam de uma ou duas plantas.